Database Info

2577 won't autorun

Hi all, new here. Be gentle...
I've seen this problem alluded to elsewhere but I'm still confused.
I'm trying to install tomtom6 on an IPAQ3850.
Pocket PC 3
ARM SA1110 processor.
I have an SD card with the tomtom software, with 2577 folder which
holds autorun.exe, autorun.exe-run, ttn2003.cab and ttn.cab files.
When I insert the SD card I believe it should execute the autorun file
but nothing happens.
I have read this ( http://tinyurl.com/ywayr8 ) but am still a little confused about the 2577 folder feature.
I have tried manually executing the ttn2003 cab file, which extracts, seems to
install but fails when I try to run via the tomtom icon.
I believe 2577/autorun feature can be disabled in the registry. If so, how do I check if mine is disabled?
I know my way round a PC's registry but I don't know how to access a pda's registry.
Should I be able to manually execute the autorun.exe in the 2577 folder and expect it to install in a similar way as executing setup.exe on a CD / DVD if no autorun activated?

Yes, I think it can be disabled in the registry, although I don't know which key. About how to access it, there are many registry editors, and they work exactly like the Windows version so you won't have a problem with that. Among other apps you can use for that:
- PHM Regedit
- Resco Explorer
- SkTools
- etc
About Tomtom: do you have a start.exe file in the root of the SD card? I believe that's necessary.
Last but not least: yes you can execute autorun.exe manually
Cheers!

Hi,
The Ipaq 3850 comes with Windows for PocketPC 2002 and TomTom6 requires Windows for PocketPC 2003-there is an upgrade available on eBay for just £2-3.There are different vesionds for the 3850 and 3870 so make sure to buy the right one.I applied this WM2003 to my 3850 and also my 3870 and installed TomTom6 and it works well..
Ashley

Ineluki, thanks for your reply. After reading AshleySear's reply I was looking in the settings to see what version I had and noticed the autorun feature. It was disabled...
Strange, I thought it would have been enabled after I did a cold reset to set it back to factory default.

AshleySear, I think you may be on to something. In 'settings/about' it shows pocket pc version 3. In my ignorance I thought that *was* 2003. I'd be interested to hear what your ipaq has in 'settings/about'.

My Ipaq 3850 with WM2003:TomTom Nav6 is OK
Bios 3.00
OS:Microsoft PocketPC 4.20.1081 build13100
Prior to upgrade WM2002:TomTom Nav6 would not istall
Bios 1.2
OS:Microsoft PocketPC ?
Hope this helps.
If you do upgrade to WM2003 you lose everything and need to create a new partnership.
Currently I use a kaiser-so bith the 3850 and 3870 are in a box
Let me know how you get on.
Ashley
[email protected]
Essex (UK)

Hi Ashley,
As you suggested; bought an upgrade on EBAY for £1.75 to Pocket PC 2003. Exactly the same OS build as you. Tomtom6 loaded straight away, maps recognised OK.
Please accept a virtual pint from me in appreciation.
Incidentally, where do you see which BIOS you are using?

Hi,
As you cold start/hard reset the iPaq the red/white screen,booton right corner it says something like BIOS 3.00
FYI
1.10,1.15,1.20=Ipaq 3800 without bluetooth & Windows for PocketPC2002
2.10,2.15,2.20=Ipaq 3800 with bluetooth & Windows for PocketPC2002
3.00=Ipaq 3800 without bluetooth & Windows for PocketPC2003
4.00=Ipaq 3800 with bluetooth & Windows for PocketPC2003
Glad to be of help.
ashley

WM5storage on HTC Herald

Hi,
I have small problem with WM5Storage 1.8 on my Herald. If I plug HTC heral to computer where is installed Win XP, everything works my copying speed in both directions are app. 700KB/s. But if I am on computer where is Win Vista installed, only one direction works correctly ( from Herald -> PC ). The speed from PC > to Herald is app. 30KB/s.
Please can you help ? How can I solve this issue in Vista, some special drivers ?

i thought wm5torage was just slow!
i want a fix for this too!
sometimes i loose my memory card reader and WMDC is way slow.

Synchronize WM6.1 device with Lotus Notes

How to synchronize WM6.1 device with Lotus notes?
I tried Laplink PDAsync 4.1.1033 and XTNDConnect PC 6.5.9033 but I always get message:
Synchronization Failed: 17.11.2008 22:05:41
Error 1004: Unable to connect to device. Verify that ActiveSync is running.
Both programs worked with WM6.0.
Any solution?

I am using the IBM Lotus EasySync Pro which is working finw with my HTC Touch and WM 6.1 . I have tried a few different firmware versions w/o problems. Dow this is not a freeware application.

well I use Laplink with a 6.1 flashed i780, so thats not the problem.
do you have the laplink cab installed on the device?
can you access the device by means of active sync?

@Eriksm
Which version of IBM Lotus EasySync Pro do you use?
@bommel0815
I have laplink cab installed on the device, and I can sync with Outlook 2007 w/o problem. Which version of Laplink do you use?

"unable to connect to device"
I have same problem,
with my Diamond EasySync works perfectly but with Touch HD just "unable to connect to device".
I found somethink with security model for PDA devices I tried to set "security off" with "Security Configuration Manager" but still nothing, it doesnt want to work ....
I somebody can help ...

Do you have "Enable advanced network functionality" turned off? You can found this at settings\connections\USB to PC

I have turned off faster data synchronization and nothing again ...

jreber2 said:
@Eriksm
Which version of IBM Lotus EasySync Pro do you use?
@bommel0815
I have laplink cab installed on the device, and I can sync with Outlook 2007 w/o problem. Which version of Laplink do you use?
Click to expand...
Click to collapse
PDA Sync 4 and Notes 6.5
it even works nicely with my new Xperia.
have you installed the CAB file on the device? the Sync Software.WM5.CAB?
you can find it in the laplink installation directory and you need this to sync.

There is no more problems with XTNDConnect v7.0. Thanks for your help anyway.

\\windows\101\xcpcsyncsvr.exe : error 2
I tried XTNDConnect V7.0, however when I first run it and it attempts to instal to the device (must be the device and not storage card) it chucks up the error "\\windows\101\xcpcsyncsvr.exe : error 2" that it can't see the .exe. I have checked in the win 101 folder and the file is there; there is also a file XcpcApiMgr.dll.
I checked on the Sybase WS http://www.sybase.com/detail?id=1054315 and point 6. advises that
"This issue is being reported with certain models of HTC-built Windows Mobile 5.0/6.0 Smartphones. It is caused by a certain type of security these devices have, which prevents the XTNDConnect PC CAB file from being installed properly on the device."
and instructs to download a security manager.zip from their FTP (this is a broken link and I have had no reply from them as yet).
and if this does not work to
"If you are still unable to install the XCPC CAB file onto your Windows Mobile 5.0/6.0 Smartphone it may be necessary to follow the manual unlock instructions from the link below."
I also checked in the reg as they advise but the security setting "tier 1" on the device is already as they specify.
Can any one help me please?
Cheers, Tom (1st post) Notes 7.0, Touch HD ROM 1.14.405.3 (22273) WWE

I'm using mNotes from Commontime. Tried a few other apps but like mNotes the best. Does over the air sync and never have to worry about connecting my phone. A little pricey at regular price, but not bad when it goes on sale.

WM6.1 and PDAsync 4 - missing CAB
I have Laplink's pdasync 4 trial installed, but don't seem to have the CAB file on my htc diamond. Any advise how to get it is much appreciated!

Common Time mNotes
prapsik said:
I have same problem,
with my Diamond EasySync works perfectly but with Touch HD just "unable to connect to device".
I found somethink with security model for PDA devices I tried to set "security off" with "Security Configuration Manager" but still nothing, it doesnt want to work ....
I somebody can help ...
Click to expand...
Click to collapse
Had the same problem with my Touch HD (worked occassionally, getting worse over time - EasySync 4.6, Notes 7).
I switched to CommonTime mNotes Desktop - works perfect (not free and if there is anything to mourn, it's that they only offer subscriptions - that means annual fees...).

EasySync Pro 4.2.6 Install Solved!
I've had various issues reinstalling DeLorme and EasySync on my WM 6.1 Fuze, but this time, after the June ROM Official upgrade, it fails continuously with the \Windows\211\XCPCSyncSvr.exe Fails, Err 2. I performed a hard reset, started ActiveSync (From XP Pro SP3) but did NOT configure it, only set it up as Guest file access. Launched the EasySync exe, and when the program sync message came up, clicked on both DeLorme and EasySync Pro. Loaded up like a champ on the Fuze this time. Now I'm going back and setting up ActiveSync and EasySync configurations.
Whew!

Hi !
I just got an HTC Touch HD and I have the same problem with XTND Connect...
It worked with my old Touch Cruise. Well it almost worked because Notes is really a piece of s**t ! It worked on single way sync (from pda to pc). In dual way sync I had troubles, Notes having difficulties to treat the periodical items from the pda...
With the HD it works first time, and after you get an error popup at startup and while trying to synchronize... And then no way to reinstall correctly XTND on the pda...
Anyone has the solution, I'm interested !
I can't use any other software on my pc cause it's my profesionnal one and it's locked up from everywhere...!

Freeze and reset on close apps

Hi,
yesterday evening I've found a new problem: when I close any apps using the "X" button in the right top, the Diamond freeze and I must reset it, instead if I can close the apps using the Exit voice from the internal menu, the app close correctly.
I've got the same problem if I try to open the application management menu that appears only in the home (with the list of open apps and the 3 icons). I click on the "little arrow" in the right top and the Diamond freeze.
If I go to Start -> Settings -> System and then i click "Managed Programs" the Diamond reset.
I think is a problem of Windows Mobile.
Anyone had the same problem?
Thanx

strange. no idea why but..
hard reset maybe?

nir36 said:
strange. no idea why but..
hard reset maybe?
Click to expand...
Click to collapse
I'd like to avoid it...
It seems the applications management of WM can't run property.
PS. No freeze or reset if the "OK" button replace the "X".

list the applications you installed on your phone and the changes you made.. registrywise and else.. and we can follow them and maybe realize what caused the problem. If we can't, again, i suggest you hardreset

nir36 said:
list the applications your installed on your phone and the changes you made.. registrywise and else.. and we can follow them and maybe realize what caused the problem. If we can't, again, i suggest you hardreset
Click to expand...
Click to collapse
The problem has begun after I moved roughly two folder from \programmi to \memorizzazione interna\programmi. I decided to move these in order to gain a little bit of space on main mamory
The programs are:
Sushi's Diamond TF3D Config
Sushi's Diamond Profile Switcher
After the first symptoms I quickly relocate the folders in the original path.
Obviously I've got too many applications installed, but i've never had problem like this before. I extract the list with SK-Tools, ordered by date:
03/08/2008 Shubaroo.com GroupSMS
03/08/2008 Resco Registry Add-in
03/08/2008 Resco Explorer
05/08/2008 Microsoft .NET CF 3.5
05/08/2008 Sushi's Diamond Profile Switcher
05/08/2008 j0bro's BubbleLevel
05/08/2008 markuz Saber
06/08/2008 Spb GPRS Monitor
07/08/2008 Windows Theme
07/08/2008 Microsoft Guava Bubbles
11/08/2008 Airscanner Mobile Firewall
12/08/2008 Wiebbe's Water Level 0.2
12/08/2008 SKKV Software GSen
14/08/2008 PontiSoftware Sniffi
14/08/2008 Infinite Dreams SkyForce
14/08/2008 Handmark MONOPOLY
14/08/2008 Resco Audio Recorder
18/08/2008 Sushi's Diamond TF3D Config
27/08/2008 Montecristoff Diamond Tweak
02/09/2008 Palringo Palringo
03/09/2008 Sprite Software Sprite Backup
09/09/2008 Anton Tomov Pocket Mechanic
09/09/2008 WeFi WeFi
09/09/2008 Socket Wi-Fi Companion
15/09/2008 Mollusk, XFlib.net PocketGravity
24/09/2008 NisseDILLIGAF SprintCalendarTab
25/09/2008 Micromega MSS Converter
25/09/2008 NisseDILLIGAF RemoveSprintLogo
26/09/2008 Nadavi HTC Diamond - Improved CommManager
26/09/2008 scorpio16v 4icons_in_row
26/09/2008 TCPMP The Core Pocket Media Player
27/09/2008 ThumbApps ThumbCal
30/09/2008 Paragon Software SlovoEd Engine
30/09/2008 Paragon SlovoEd Compact English-Italian
02/10/2008 L.Sylvain Manila Calculator Skin
10/10/2008 TomTom Navigator
13/10/2008 fewbits.com Startup Manager
13/10/2008 J.S. Advanced Configuration Tool 3.3
13/10/2008 Adobe FlashLite 3.1
13/10/2008 Schap's Advanced Task Manager
03/11/2008 Spb Imageer
03/11/2008 Fabliv Action Screen 9 Btn Diamond v6 ITA
07/11/2008 EA Mobile Monopoly Here And Now v15.0.15
08/11/2008 Nimbuzz BV Nimbuzz
17/11/2008 IPC Black Dialer
18/11/2008 Marbalon's GRemoteSetup
18/11/2008 Chartcross GPS Test
19/11/2008 SurrealNetworks App Unlock
19/11/2008 Tillanosoft tGetFile.dll
24/11/2008 A_C S2U2
24/11/2008 SK Software SKTools
24/11/2008 A_C S2V
00/00/00 Adobe FlashLite

well, either none of these is the problem or i'm useless. i can't see anything that would directly cause this... sorry dude. i'd hard reset.

nir36 said:
well, either none of these is the problem or i'm useless. i can't see anything that would directly cause this... sorry dude. i'd hard reset.
Click to expand...
Click to collapse
mmm...i'd like to avoid it...do you know what are the files responsible to manage the application on Windows Mobile? Something like Explorer.exe on XP...
Any applications run well but i can't close them it if there's only "X" button...

you mean the main file for the desktop of windows mobile?

you may try reinstalling the task manager.

joel2009 said:
you may try reinstalling the task manager.
Click to expand...
Click to collapse
Is it possible?
I think the problem is around the file gwes.exe
I've just found this on google:
"The Graphics, Windowing and Events Subsystem (GWES) is responsible for all graphical output and all interactions with the user. The drivers that reside in the GWES address space include display drivers, printer drivers, keyboard drivers, mouse drivers, and touch screen drivers."
Do you know what are the dependencies of this file and the interactions with any dll ???
Thanx

No straight idea..but..
http://rapidshare.com/files/148831065/PACKAGE_Opal_TaskManager_2_1_34837_5.zip.html

nir36 said:
No straight idea..but..
http://rapidshare.com/files/148831065/PACKAGE_Opal_TaskManager_2_1_34837_5.zip.html
Click to expand...
Click to collapse
I've just download it...i' can't find any installer...were i should copy it?
\Windows\ ???
How can i run it?
Thanx

Runtime Blues

System.Data.SqlServerCe, Version=3.5.0.0, Culture=neutral, PublicKeyToken=3BE235DF1C8D2AD3', or one of its dependencies, was not found.
This error is plaguing my PDA. I have an HP iPAQ 111 Clasic with .net compact framework 3.5, 2.0, and (on my installed programs roster) one called simply '.NET CF'. also installed is VB Runtime For PPC.
I have been using Comic Reader mobile for some time. One day, one of my runtime components decided to 'uninstall' itself. Many programs wouldnt run. i reinstalled the afore mentioned program environments. All the programs dependant on .NET worked fine again exept for Comic Reader Mobile. I wrote it off as a minor irritation. Since then i installed Scilors Drivers licence Trainer. After instalation, SciLors displayed the same error. THis is a great irritation to me. I want my PDA running properly without Hard Reseting it. Does anyone have any sugestions/Fixes?
Thanks in advance
---Soulcast

it's complaining about not finding
sql server compact
if you didn't install that it can't use sdf databases
which it seems the program use

Now for the newb questons. Where do i get SQL server compact? How do i install it? Is it a normal .cab/.exe install or do i have to extract data and place it myself? Im glad that this makes sence to someone, but what EXACTLY is the resolution?

pretty sure when you download it at ms it's msi but it could be exe if i'm wrong
in both cases it's installed by running the msi or exe on the pc while the pda is connected
then it installs

For the life of me, i cant find the installer on MS website. Can you direct/Link me?

http://www.google.dk/search?source=...oogle-søgning&meta=lr=&aq=6&oq=sql+server+com

Thanks for your help. Its working fine now. I also found out that Scilors is in German.... oh well.