hello
i got my polaris for 3 days: everythig ok until i applied the screen protector (i think there started my problems):
first simptom - touch screen with response problems, than not working at all! (yes i removed the screen protector)..i hoped that maybe it is a software problem.
i have tried using it with the buttons - manged to lock the keypad
so after searching the net i found the way to "hard reset"...but that needed both gps and IE buttons pressed.... locked
Next step: i found this forum ..searched for any similar problems..no luck
Tried to flash the ROM using both bepe and udK (bittdefender found "Trojan.Qhosts.AQP" in udK release ) tools. Both tools stucked at 0%.
Another tool needed EnterBootloader.exe to run on my PPC. but without keys/pen i could not install it, so i put the a command for program in my Startup tasks on the PPC.
Now the ppc starts and then goes in the 4 colour mode. I'd tried to install/flash the ROM again..no luck stucked at 0%.
Can anyone help me?? could it be a software problem? or maybe it.s a hardware problem. (i gor no response from the touch screen since)
Thanks!
P.S. Sorry for my english..hope u understand my problems
One question: did you use water or something else to place the screen protector on your device?
Return it asap!!
I used some glass cleaner (foam)..but the screen was dry and clear when i put the protection.
The phone is in service now...(repair..if not a new one)..
I think you may have damaged the digitiser when applying the screen protector. Possibly the ribbon was only just making contact and your pressing on the screen has dislodged it enough to stop it working.
hello to everyone,
i would like to expose the problem that afflict my htc touch pro aka raphael, often when i have to write and i switch on the built-in keyboard the procedure seems to go correctly, the landscape flip, the keyboard lits and everything gonna fine until while digiting few digits the keyboards unlit, the screen flips in normal mode and never return to landscape, but the keyboard after few instants returns lit.
i know that probably, not surely, it's a hardware fault, like a fake contact, but opening the phone, the fast contact seems to be in good state, i placed a tap of insulation scotch to make sure that the connector, on the sliding moment doesn't go out from the socket on the board; the conductive mylar seems all connected on the whole surfaces and now i'm breaking my head and that effect annoy me too much and i'm near to practicin' the throwning phone sports...
maybe someone of you had thesame or a similar problem and solved it?
i precise that the phone is a de-brandized one, there is no more warranty cause i bought it by 2nd hand and the problem wasn't present 1 month ago..
any suggestion?
My HTC Touch Pro pick the call during the time when I move it out from my pocket during it rings. Sometimes in my pocket it picks the call automatically when someone called me and I am totally unaware of that call..
Is there any way to stop this... Please help
htc touch pro picks the call automatically
WHOO HOO!!!!! I am not the only one that this has happened to! I thought it was because it had the "touch screen" too sensitive
-rastlin
Then is there any way to avoid this.
Because this is ridiculous that call picked up automatically which you don't want to pick .
RIGHT!!! the only way i found to deal with this issue is to set the screen sensitity for a higher setting
-rastlin
How can I change the screen sensitivity to resolve this issue.
There's something in the options
I'm not sure if you can follow me because i have a german version, but there is an option.
At personal/phone (the phone icon) go to the very right.
There is an option to answer without pressing a button.
Does it help?
Actually, i don't have any problems with the sensitivity, because the phone goes to standby and the only way to reactivate it is pushing the on-button...
When in sleep-mode the phone reacts to calls as it should.
Hi everybody,
I have a HTC Fuze and been using it for a long time now.
Yesterday I reckoned that the spring which holds the ribbon slider is dislodged so it wouldn't close the black ribbon Cover.
So I happily found a service manual for the Fuze and gathered my tools to solve the problem.
I have to hand it to myself that I read the manual and was able to disassemble my beauty safely, put back the little spring to hold the black cover for the ribbon slider again.
After that I carefully assembled my Fuze again!
The mechanism was as smooth as silk and I was proud of myself
But then I switched it on and now I find that the Screen is somehow stuck at the LAndscape position.
To explaing it better, let's say if I reset my device and boot it up again (while the keypad is closed), my Fuze still thinks that the slider or keypad is OPEN so it boots up the TAEL ROM in landscape mode only! The only way to go to Portrait is to use the Rotate Screen option.
I thought this would get fixed by a had-Reset and Flashing it again but it still does not work
So now I am stuck on my fuze with the screen always in LANDSCAPE mode.
Note: All the keys are working fine on the Keyboard, including the back-lit!!!
Somehow I think that I missed something while putting it back that lets my Fuze to detect that the Keypad(Slider) is OPEN or CLOSED...
I'm not much of a Geek but I tried opening it again and checked all the ribbons and connectors... No luck.
All features of my Fuze are OK but for the fact that it is stuck always in LANDSCAPE mode whether I close the keypad or OPEN it!!!
Please help, I have an iPhone too but I love my Fuze!!! I don't want it to be sitting inside my desk for the rest of its life :'(
Is there a button or lock that detect the slider opening/closing?
Thanks,
Hi all,
Since the beginning I have a weird issue that my back button sometimes wont work.
If I touch the screen somewhere else the back button works again.
Currently updated to latest firmware for my model 1.27.401.5 and using viper 1.7.0 but problem still exists sometimes.
Any ideas? Or more people who have had this issue?
For me it's the back button and the recent apps button. Started a few weeks ago. Doesn't always happen, but does more often than not. Restarting doesn't fix it.
I presume it's because of either an update or app that I loaded, but don't know what.
hi, same probleme for me back button and led indicator and recent apps button dont work
i full wipe and same dont work plz help me
i tested an othe custom rom and button not work also
it did to me overnight
Help me please
Envoyé de mon SM-G955F en utilisant Tapatalk
Just out of curiosity, what type of screen protector if any are you using?
I personally don't have a screen protector and I'm also running the latest ViperU Rom....and the only problem I have with both the recent and back button is that they don't have a "wide touch sensitive zone" you have to touch exactly where the button is....which is hard when it's not lit all the time...
I bon t use any screen protector me too
Envoyé de mon SM-G955F en utilisant Tapatalk
I use skinomi
anyone found the solution to the adressed problem?
Same problem here. Back button not working sometimes, same with viper, leedroid or stock rom, with screen protector or without.
What version of software do you guys have?
My software number is 1.27.401.5 and now im looking on htc offical page there is an update 1.28.617.6 which is newer than my own, but when i check system update it doesnt offer anything... Sry for bad english
6th_Hokage said:
I personally don't have a screen protector and I'm also running the latest ViperU Rom....and the only problem I have with both the recent and back button is that they don't have a "wide touch sensitive zone" you have to touch exactly where the button is....which is hard when it's not lit all the time...
Click to expand...
Click to collapse
same here
Just started to me. I noticed something smudged on my screen part of it covered the back button. I tried to turn the screen off before wiping it off but every time I tried to wipe it off the screen would activate and the back button capacitive action would keep kicking on. Now I notice neither my back button or right side "menu"button work or light up anymore.
Have only had this phone a few months. This would be a non starter for me. Anyone have any fixes?
Sent from my HTC U11 using Tapatalk
I'm using home button to wake up screen... and just don't wake always!?! I' noticed when i have notification blinking then is happening!?
Anyone have same problem... Tried wipe cache, installed RRU - nothing problem is still here!??!
nomaj said:
I'm using home button to wake up screen... and just don't wake always!?! I' noticed when i have notification blinking then is happening!?
Anyone have same problem... Tried wipe cache, installed RRU - nothing problem is still here!??!
Click to expand...
Click to collapse
Unrelated; try a new thread..
Sent from my HTC U11 using Tapatalk
Hi,
Have the same problem with my HTC U11 life, both buttons are away. Only the home Button works. How could I fix this problem?
Hello ! I have the same problem with htc u11, the recent application button is working alone, without being touched, lately it's getting more and more often. How can this extremely troublesome issue be solved? Thank you !
Hi, I've had my HTC U11 since launch and it's always had what I would describe as an 'intermittent fault' with the back button. I've just upgraded the software for I think the 3rd time and it's still the same. Now on v 2.33.401.10. I find a little extra pressure usually works but it's annoying, especially when everything else works so well. It's the same whether I have a screen protector on or not and it's not an accuracy thing as I can hit the same spot 20 times and while most will work, there will be patches or 2 or 3 presses where it won't respond. A solution would be much appreciated!
The Back and Apps buttons never worked nicely for me, it was kinda hard to find and press with naked screen and with glass protector almost impossible. However, I have the Glove mode always on and the buttons work fine. In Oreo Settings → Display, gestures & buttons → Glove mode.
But sometimes (I guess when the phone is hot; when charging OR on battery so no charger issue) the squeeze is overly sensitive or there are taps at the top edge of the display when nothing (fingers, metal nor anything else conductive) is nearby the area, in extreme cases it starts pulling down the notification drawer and even opens notifications by itself. It's rare now, if it gets more often, I'll probably claim warranty.
So do I.... I also have the problem with the screen buttons. The "back button" usually works fine and forget to work 1/10 times, however the right "multiwindow button" makes me crazy. Often when I hold the phone in my hand, this button lives with its own life and turn on the multiwindow mode (as it "presses" by itself 2-3 times in a row). At the begining I thought thah mayby I'm pressing it by a part of my palm, but I after observation I realised it goes whithout my contribution. I'm sick and tired.