Is there a way to hang up a phone call from the handsfree button? Its a bit annoying having to pick up the phone from the pocket everytime you want to hangup. There should be some way to hang up from the handsfree instead of "switching calls"
What handsfree are you referring to? The headset that came with the phone or a seperate BT handsfree? If it is seperate BT handsfree then the answer is that this should work but it depends upon your handsfree. I use two different BT handsfree units and both can hang up calls with a press of a button.
peterc10 said:
What handsfree are you referring to? The headset that came with the phone or a seperate BT handsfree? If it is seperate BT handsfree then the answer is that this should work but it depends upon your handsfree. I use two different BT handsfree units and both can hang up calls with a press of a button.
Click to expand...
Click to collapse
I have used the original handsfree and when i get a call I can answer it with the button on the mic, but when i want to hang up i have to pick up the phone and press hang up i cant use the handsfree button, if i press the handsfree button it wants to "switch calls" even thou there is only one call.
Related
Hi!
I have this problem; when I have an incoming call and I press the button of bluetooth hands free the call is rejected instead of being accepted!
Do you know how I can change this? Perhaps with a registry hack?
i bet you have a plantronics headset, i also have the same problem, though only with plantronics and not with other manufactured headsets. seems to be compatibility issue with wm6?
Hi,
No, I have a Philips HHB-600.
I have found a partial workaround for this that partially solves the problem.
By default, sound is redirected to the device when you press the device button to accept the call and to headset if you press the headset button to accept the call.
Set (or add if completely missing) the ConnectScoInAlways=1
under HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway. This will cause the device to redirect voice always to the headset. Still accepting the call from the headset will not work but a least you will be able to use your headset to speak/listen and end to the call.
I have bluetooth headset NOKIA BH-101. it works with my htc tornado like handsfree. but i can not get it play all sounds. it only works with calls but when ii play sounds or video files it sounds out of my phone.
This gadget supports Hands-Free and Headset but does not work with voice dial function. Can anybody help?
makler1981 said:
I have bluetooth headset NOKIA BH-101. it works with my htc tornado like handsfree. but i can not get it play all sounds. it only works with calls but when ii play sounds or video files it sounds out of my phone.
This gadget supports Hands-Free and Headset but does not work with voice dial function. Can anybody help?
Click to expand...
Click to collapse
try to chek the settings
bestever said:
try to chek the settings
Click to expand...
Click to collapse
what exact setting do you mean?
try this cab i found on http://mobile.surrealnetworks.com/
Check this thread too:
http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp
This will install newest bt stack.
I should also ask which ROM you're using. The newer ROMs seem to be a lot better.
I'd also like anyone who could to tell me which BT stack is included on the newer ROMs, like Nitro or vjgrace.
Exitao said:
Check this thread too:
http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp
This will install newest bt stack.
I should also ask which ROM you're using. The newer ROMs seem to be a lot better.
I'd also like anyone who could to tell me which BT stack is included on the newer ROMs, like Nitro or vjgrace.
Click to expand...
Click to collapse
my ROM is WM6 by vjgrace v3.4
Again I could describe my Nokia BH-101 BT headset with handsfree functionality on WM6 by vjgrace v3.5. It works nice as headset i can hera incoming calls, answer them, call last dialed number. But I CAN NOT make it start voice calling, due to device itself - it does sounds special tone that means that voice dial is started, but my phone does not recognise it. by the way useing celetask - there is special feature - that alows you to redirect all sound to headset and it work. As for me i don't need it (you are to have special BT Headset for listening to music. This headset generates rather bad sound(but not voice).
So again
I can do:
makle calls,
answer calls,
dial last dialed call.
swap and hold calls.
I can not do:
make voice dial
any voice commands
What are the problems:
Everytime I answer the call not by the headset but via the phone it looses the connection with headset, so i need to restart BT service (or headset).
It happens even if I answer by headset but during the call i need to speak via phone then i press right softkey and choose "turn handsfree off" and aain phone looses the headset
In this case I I make new call but in right soft key menu "turn handsfree on" is not active
If it's possible to make phone speak contact's name litterally during incoming call so i could know who is calling me.
IRC, voice dialling with WM phones is a bit of a problem. I seem to recall reading about this somewhere in the XDA-Dev forums.
On my headset, the function that calls for redial is the same for voice dial (wtf? I know.) It always redials.
As for the speaking of the contacts' names, it should be possible... if your phone can speak the contacts' recorded voice names w/o BT.
I'm sure you've heard of this issue before but I was unable to find a fix!
I have been using VC1.6 through strictly the device mic / speaker and it has worked great except for some reason it does not announce incoming calls.
Currently using ATT TILT with WM6
Using 520 Plantronics BT Headset
I downloaded "Bluetooth Voice Command Configuration" from XCSdM but it doesn't seem to do anything to help!
When I press the talk/end button on the Headset it enables the bluetooth static but it does not give the VC prompt.
I'd also like it to be able to announce incoming calls through the bluetooth!
Anyone?!
Well, I got the incoming calls to announce!!! Now all I need to do is find out how to get the VC1.6 and my bluetooth synced so that when I press my bluetooth headset button it activates the VC...
Please? LOL
Does your bluetooth headset support the handsfree profile? Not all headsets support the handsfree profile (even if you can use it to pick up and answer calls). I've got VC 1.6 and voice command working just fine with my Tilt and Jabra 8010.
edit: seems your plantronics does support the HFP. Did you ensure you "checked" the box for Hands Free Service when you paired it?
Yes, it's completely paired and the handsfree is checked :-\
I'm stumped. I get incoming call notifications, I get announcement reminders, etc.... but when I push the button on the headset it tries to initiate (or answer) a call.... If I hold it down, it powers off the headset. If I double click it, it calls the last person I talked to.
Maybe I just don't know how to function my headset to get it to prompt for VC?
I followed the "RandyRants" Tip to get everything working and it did activate the announcement of incoming calls, etc... just can't make commands yet.
I'm also using the BT VC Config enabled @ 30 duration.
I'm 1/2 way there!! Now I just need to cross the finish line...
Here's the link yo RandyRants that I followed: http://www.randyrants.com/2007/05/wm6_tip_voice_c.html
Any advice?
didn't really see a thread....mod's if this needs to be moved, please do so.
I've noticed a quark in the way the Bt audio gateway works on my fuze.
Does NOT matter which headset I use, but, 99% of the time, if someone
calls me, I hear the phone ring, activate the BT, they can hear me, but I
cannot hear them. If I shut the headset off, turn it back on and let it
connect, I can hear them & they can hear me. This ONLY happens on incoming
phone calls. On outgoing, everything works.
When connected, if you look at the BT icon, it shows the BT icon, with what
looks like a STEREO headset. If you click on it, it says connected to a STEREO
headset, which my JB2 or any other BT is not.
Is it possible that the fuse is using the mic, but the sound is being directed to
a non existent "stereo" headset, which would be the other ear?
Happy Thanksgiving! Everyone have a nice Triptophan (sp) nap?
Do you have MSVC set to announce incoming calls? If you do and you answer via the headset, you can't hear the caller. Disable announce incoming and it'll work just fine.
It's a known bug and we need to complain about it (and the rest, like the left/right dpad) to AT&T and HTC.
MSVC set to handle BT, announce incoming.
When I hit the button on the headset, the incoming ring/announcement stops,
the phone says it is connected, and the caller can hear me, but I cannot hear them.
I was wondering if anyone using a NON stereo BT headset, when you are connected, it says if you click on the BT icon, "stereo headset".
Just in case you missed it - you can't have MSVC announce incoming calls OR IT WILL MUTE THE CALLER.
Turn the announce off and it'll be fine until MS/HTC/ATT fix their stinking problem...
oh and don't forget to complain...
Oh, I have complained....never had that problem with the tilt.
I guess I'll go back to just having unique ringtones for everyone, so I can tell
who's calling...until MS fixing the #%@#^ problem. Thanks for the
clarification. This was driving me nuts! They could hear me, but I couldn't
hear anyone.
pkley said:
Just in case you missed it - you can't have MSVC announce incoming calls OR IT WILL MUTE THE CALLER.
Turn the announce off and it'll be fine until MS/HTC/ATT fix their stinking problem...
oh and don't forget to complain...
Click to expand...
Click to collapse
I noticed recently that I can make a phone call out using my BT headset and MSVC and when it connects, the BT drops the call and my phone becomes the reciever. Annoying when I'm waiting for the call to connect, and the person is already there on the line going "hello?hello?"
I also noticed that when I get a call, sometimes the same thing happens. My phone rings, when I press my headset to answer sometimes, it goes straight to phone.
Sounds like the BT is loosing connection...
Same here. I hear nothing on BT and I bring the phone up to my ear and the person is going "Hello?" "Hellloooo???" It is kind of annoying. I am using a Jabra BT8010 headset.