Anyone knows what I can do to update the numbers to match the contact it was assigned under? I deleted an activesync profile on my phone, and then restored it with another laptop, and now my call history is full of numbers without any names. Help? Soft resetting didn't do anything...
Try installing "Advanced Config" (www.touchxperience.com). There's a setting under 'Phone' that reads 'Call ID match'. Set this to the "last x numbers that is used in matching contact with phone number". I.e. in the netherlands we have these formats:
+31xxxxxxxxx
0xxxxxxxxx
(the last 9 are always the same), so for Holland you put this value to 9.
NetRipper said:
Try installing "Advanced Config" (www.touchxperience.com). There's a setting under 'Phone' that reads 'Call ID match'. Set this to the "last x numbers that is used in matching contact with phone number". I.e. in the netherlands we have these formats:
+31xxxxxxxxx
0xxxxxxxxx
(the last 9 are always the same), so for Holland you put this value to 9.
Click to expand...
Click to collapse
It's 8 for mine. But it's already defaulted to 8, and the call history is still not updated.
yeah same here, pre set to 8 but just numbers and not contacts (except for 1 call has a name)
I Have the same issue, 8 doesn't work, nor does 9....
I have altered the sample sms-numbers to have only numbers, no spaces, but still, no luck...
Does anyone have a solution yet?
Could it be that you have duplicate contacts, ie. the same numbers in 2 contacts?
Not the Cell Phone numbers, but yes on home phone number (I actually share my home phone with my wife, so that number is in two contacts, yes )
For some reason I received an sms of my wife this morning, and now I did get a name, so it appears to be a solution on new messages only... Hopefully it is now solved for all the messages...
Same issue here, although mine was caused by some messing around I was doing with the contacts.
Call history had names and numbers to begin with.
I synced the contacts with my work computer to mess with them.
I synced them back to the phone.
I backed up the contacts with PIMBackup.
I removed the option to sync contacts in ActiveSync (which removes the synced contacts from the phone).
I restored the contacts with PIMBackup.
Existing call history now only has numbers, but new calls have names.
Anyone know of a way to update the existing call history to show the names?
-=Zzedly=-
Related
i recently went into the contacts list on my xda orbit 2
only to find it was only showing just 2 contacts which were listed on my sim card,
i cannot see any of my outlook contacts at all ?
if i wish to phone anyone who was on my contacts list,
i have to find MMS from this person and dial from there,
contact is showing correctly as sender of sms as per listing in contacts
except i cannot view the list showing 'ALL' contacts
any help appreciated folks
-thanks
Dont you have a filter in the contacts view?
hi,
my orbits filter settings are set to exactly the same as my mrs's orbit2
her contacts list is a-o-k
sms text messages recieved prior to this problem ALL show senders name as it was listed in contacts & also the number as was provided when i created the contact
ALA - orbit seems to be using the original contacts list to provide sender details for text messages recieved prior to error happening,
yet.....
will NOT allow me to access the contacts details etc,
anyone got any input / ideas etc, as im well n truely stuck without these contacts
same troubles
I have also found that on regular occasions that my Orbit 2 looses all the ring tones and name tags tied to contacts.. I can reset them all and within a few weeks they go back to default... Gets most annoying when you try to set tones to know who is calling..
AFAIK that's a Registry Error.
It's a common thing in MS Windows (including Windows Mobile) to have registry errors.
Only 2 things to solve this kind of problem:
Restore from the latest backup
Hard Reset
After I upgraded to WM 6.1 I don't see the names of contacts when they're calling me. Is there a fix for this? I thought it had something to do with the countrynumber, though now I think that's not the case.
Huh? It should not be the case.
However, Schap's Advanced config tools have one setting where you can control how many digits phone uses to recognize contact.
I have all contacts in international format (+countrynumbernetworknumberphone number) and have set number of digits to 9 (default is 8).
Of course, networknumber is without leading zero.
Or if you have multiple entries for same contact, phone could be confused and display only number, not name.
But I guess that's not the case...
Synchronizing
I Synchronized the phonenumbers of the phone with my desktop. It now seems allright. I now see the names of the people who are calling.
BTW: I did a backup with Sprite software. I think something went wrong here.
Hi
I have a question, I have a rahpael running WM6.1. When I get an SMS
instead of showing the name of the person that sent it, it shows the
number even I have the contact stored. What I figured is that the
stored number is XXX-XXXX and the SMS comes from +61 XXXXXXX.
In other phones Ive had (Nokia, Sony Ericsson) when an SMS comes from
that number, it does associate it with the contact name.
Any ideas on how to get this done on the Raphael
Hello
I think its a Windows problem... I had the same problem ..
I´ve changed all my contact numbers to +49....... ( i am from germany )
and now it shows me the contact if i get a sms or a call..
( i changed all in Outlook and sync it... its easer than in the Raphael with this little pencil )
Greetings, all;
I am having a problem with my unlocked Treo that is driving me batty. The device "forgets" some of my contacts when I am composing an SMS.
The contacts never actually dissapear from the phonebook, and I can always start an SMS from the Contacts page, but when I start typing a name in the "To' line on the new SMS page, some names are just not there anymore.
It's never the same name, and doing a soft reset corrects the problem... for about a day.
Any ideas what might be happening here? Thanks for the advise!
Fred
I would suggest that you backup your contacts using some free program such as TCB (total contacts backup) or PPC Contacts backup. Just back them up into a file in a folder in the phone or storage card. Then go back to the program and try to restore the contacts and choose the option of overwriting the existing contacts.
Also if you are referring to the drop down list when you choose list of contacts. Keep in mind that the list is only for people you have texted before, this not a list of contacts reflecting the phone book
yes.
i also have this same problem.
it seems like there are limited contact that showed in messaging box.
For example,
i have 20 contacts whose name is started from letters : "Sa"
but when i type "Sa" in the destination number on messaging box,
it is limited only to 10 contacts which is started from letters "Sa".
So the next 10 contacts is not showed up.
is there any possibility to tweak on registry to expand this limit ?
Pls help...
thanks a lot !
IH8Q8 said:
Greetings, all;
I am having a problem with my unlocked Treo that is driving me batty. The device "forgets" some of my contacts when I am composing an SMS.
The contacts never actually dissapear from the phonebook, and I can always start an SMS from the Contacts page, but when I start typing a name in the "To' line on the new SMS page, some names are just not there anymore.
It's never the same name, and doing a soft reset corrects the problem... for about a day.
Any ideas what might be happening here? Thanks for the advise!
Fred
Click to expand...
Click to collapse
i had the same issue as well.....one contact wasn't showing up.
2 things. make sure that that contact's number has been saved as his/her mobile number, not home or anything.
secondly, just restart or something. the problem went away for me later.
Actually, the missing contacts issue happens in many application. And the search results depends randomly.
For example, I got 2 "Sherry" in my contacts from OutLook in my PC. And pretty aware that I keep the phone number in the right field.
Type Sherry in Today, I got 2 Sherry listed.
Type Sherry in Contacts, I got nothing.
Thpe Sherry in SpeedDial Setting(Link to Contacts), I got nothing.
Type Sherry in To field in New Message, I got 2 again!?!?
Very unpredictable!!! And different name will yield very different results.
Customer Rep from Palm suggest me to do a Hard Reset. But I don't think it will help, however I'll try it.
Hoping to get the solution here!!! Thanks in advance.
The wired search result is gone after I upgrade my Treo750 from WM6 to WM6.1 with a Special Cooked ROM(Build 19199).
After the upgrade, my data had been synced from OutLook again. I'm not sure whether ROM upgrade or data sync did resolve the problem.
Anyway, I'm happ again with my Treo750 again!!
happypigxda said:
The wired search result is gone after I upgrade my Treo750 from WM6 to WM6.1 with a Special Cooked ROM(Build 19199).
After the upgrade, my data had been synced from OutLook again. I'm not sure whether ROM upgrade or data sync did resolve the problem.
Anyway, I'm happ again with my Treo750 again!!
Click to expand...
Click to collapse
Wired things again................
Treo 750 will freeze (no input from touch panel nor keyboard) when I entered the edit screen of the contact person which founded in Lookup field in "Today".
But editing the contact person in the "Contacts" application will not freeze.
The edit screens in the above cases are pretty the same except the upper left corner shows "Start" and "Contacts" separately.
Any help??? Thanks in advance.
On about 5 of my contacts this is an issue. I've gone in and edited contacts and and on the 5 in question its just their area code and phone number as it should be and no addition info in the other fields. However when I call them, it says calling:15627245362718..followed by their actual area code and telephone number.
The call goes through although on these contacts but there's a delay before it starts ringing. Any idea where this string of numbers could be coming from? BTW, its the same string ahead of each contact.
I've done a factory reset and allowed my contaacts to be imported again and the string shows up on those same contacts. I also deleted the contact. Waited 24 hours then added back. Still shows up.
I'm on Android 5.0
I did a factory reset. Same issue. I downloaded the factory image for 5.0.1 and installed. Its still happening. I deleted all my conacts from contacts.google.com and manually re added them. It still happens. But not every call. I can call a contact and it says dialing 1+area code+ number. Then the next time the string of numbers shows up.
Screen Capture:
http://tinypic.com/r/2wpieqr/8