i have made a big eroor i have a daxiann t 32 with windows mobile 6 and i have put the ExtROM_for_WM6.1_CE_OS_5.2.19214_v6.01.09_Diamond__03__Black,theat has a program on the today screen and i pushed an buton wit stops the light of the screen and i dont now watt to do,i have reset him but nothing,just wont work,please help me
You mean you turned off the backlight and since that the screen stays dark no matter what you do? What device exactly do you have?
Related
Hi i recently got this htc p3600 with broken touchscreen, the lcd is fine but the touchscreen have some cracks in it.
I don't know anything about what versions of roms etc is in it. All i know is that windows mobile's in it.
When i start up the phone i get a green windows mobile screen witch says that i should click anywhere on the screen to calibrate the screen. I do htat because i can't do anything else and then this X shows up and i am suopposed to click on it in order to calibrate the screen.
I'm doing this, first in the middle then it moves to each corner but when i clicked all the corners i goes back to the middle nad starts over agaiN!!
I've clinged this stupid X for like 15 minutes now but nothing seems to happen!! Whats the problem? Can it be locked to the sim-card i've inserted??? Please help me!
guess you will have to replace the digitizer.othewise, you may try connect it with active sync and delete the call program from auto run - hopefully theres some default cal data in it.
Don't really understand what you're saying, im new to this phone and i got i broken. ALready ordered a digitizer but i want to test it out now. Tried to add a calibration value to the registry but i cant do anything because its locked.
So i think enableing rapi will o the trick but i cant start the phone to start the enable rapi program :/:/
Is there any other way to bypass this screen? Like killing the process with some taskmanager??
go search for remotecalibration.exe
Hello
I have Asus p535 Recently I have changed my PDA motherboard due to some problems. While doing That Asus gave me a free upgrade to WM6
Now after 2 months I have a peculiar probleem
My backlight does not turn up when I press the active button. Sometiomes it just flickers . Most of the time it does not turn up and I cannot use the phone
However the backlight turns on when I get an incoming call. Like wise when I do hard reset or soft rset it turns un until the windows mobile logo and goes off as soon as the Today screen turns up.
Sometimes like a mind of its own. The backlight will turn turn up normally and I can use my phone. Nowadays I have disabled turning backlight off and use the HOLD buttom to turn it off so once it turns on it remains on. However the problem still remains
To summarize in few lines
1>Backlight turns on when hard reset and reamijs till WINDOWS MOBILE logo appears and dims and turns off as soon as today screen is loaded
2>The backlight wont tuirn on with any input . Sometimes it just flickrs on and off
3<When i receive incoming call the backlight turns on and works normally
4>sometimes the backlight after flickering may turn on and the phone works perfectely for 3-4 days
I want yo ask few questions
1>Is this a hardware problem as i suppose it isnt coz phone works fine with incoming calls
2>If its a software problem is it BIOS related
3>If its software related do I need to reinstall WM6 and upgrade/ downgrade BIOS
4>Is this battery realted. however my battery does not drain fast inspite of it being 1300mah
5>My warranty is expired so any thing which can solve my problem with self help is appreciated
6> Should i upgrade to 6.1 or android as explained by some in these forums as i personally feel my problem to be wm6 related as many have complained of lock screens
DETAILS
Model: Asus p535
rom date : 2007/8/9
rom version: v4.7.12 WWE_AU00
boot version: 070416122657
battery version 1.3
MP version: V0.164
Radio version :v.4.8.0
OS WM6
Any help appreciated
Dissemble the pda and take LCD in your hand.
turn back the lcd and heat up the 2 way on the right side.
4 way is touch screen and 2 ways on the very right are lcd light.
Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!
marco221186 said:
Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi am very sorry about ur device but am sure it can be fixed I dont own a device like that I have a HTC prophet but you have to post this question in the same place you read about upgrading your device am sure they have recovery steps can u post the link were u got the files and instructions to update ur device? thanks al look into it and see if there is a solution or not but you should try to hardspl your device and flash again but if ur pc cant find the device try this go to active sync settings and uncheck allow usb connections the pc should find the device also try to download the original rom for your device you can find it at the manufacture site in the download section try flashing it to your device it should help.
if not let me know and plz post the link you got everything from ok
marco221186 said:
Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Perhaps here is the right place to look:
http://www.eten-users.eu/index.php?showforum=42
Good luck,
orb3000 said:
Perhaps here is the right place to look:
http://www.eten-users.eu/index.php?showforum=42
Good luck,
Click to expand...
Click to collapse
You can try the solution given here http://www.eten-users.eu/index.php?showtopic=19398 and see if it works for you am still looking for others but again I sugest you post your question there since the members there know more about you device then us and can help you much faster too good luck
http://www.eten-users.eu/index.php?showtopic=19074 has some good information aswell
Please help! 1st time this has happened today. My display has gone off. I soft reset the phone, it loads up the o2 screen, but goes off at the green windows screen. The rest of the phone is ok; flashing green light still ok, ive tried phoning it from another mobile, all ok.The home screen will appear but when i touch the screen it immediatey goes off. Ive a feeling its the windows sofware? I haven't done anything different to the phone at all for this to happen.
Hello there,
I have recently received an HTC HD2 from a friend of a friend of mine. It didn't work and was stuck at a black screen.
After receiving the HD2 I saw that the HD2 was in a boot loop of some sort. Every time I would turn it on it would vibrate once, and then turn off. Then it would vibrate once again and it turned off again. The backlighting of the screen would turn on, and then after a certain period of time (maybe like 5 seconds) they turn off again.
Somehow (by luck, maybe) I managed to boot the phone into windows mobile 6.5. I still got a black screen, but I could hear the sound that the phone makes after it boots windows. I then attached the phone to the computer and downloaded the latest HTC HD2 Windows 6.5 ROM and flashed it to the phone as standard procedure. Now, every time I turn the phone on I hear the sounds of windows booting up and I can connect with it using windows mobile device center. I also hear sounds when I push the buttons on the phone.
TL;DR-> Black screen, phone reacts to input.
Question: will replacing the screen fix the phone? Or is it some other component failing. Booting windows proves the phone isn't bricked, right?
Thanks in advance.
Might Help
ikheetkoen said:
Hello there,
I have recently received an HTC HD2 from a friend of a friend of mine. It didn't work and was stuck at a black screen.
After receiving the HD2 I saw that the HD2 was in a boot loop of some sort. Every time I would turn it on it would vibrate once, and then turn off. Then it would vibrate once again and it turned off again. The backlighting of the screen would turn on, and then after a certain period of time (maybe like 5 seconds) they turn off again.
Somehow (by luck, maybe) I managed to boot the phone into windows mobile 6.5. I still got a black screen, but I could hear the sound that the phone makes after it boots windows. I then attached the phone to the computer and downloaded the latest HTC HD2 Windows 6.5 ROM and flashed it to the phone as standard procedure. Now, every time I turn the phone on I hear the sounds of windows booting up and I can connect with it using windows mobile device center. I also hear sounds when I push the buttons on the phone.
TL;DR-> Black screen, phone reacts to input.
Question: will replacing the screen fix the phone? Or is it some other component failing. Booting windows proves the phone isn't bricked, right?
Thanks in advance.
Click to expand...
Click to collapse
Hi, you can always try to boot into three colored screen, by turning the phone on while holding the DownVol key at the same time. If this doesn't work you would need to buy a new screen to see if that fixes the problem.
Heres a link to amazon where you can buy a new LCD, you can also search how to change the screen on Youtube
http://www.amazon.com/HTC-HD2-DIGITIZER-COMPLETE-ASSEMBLY/sim/B003QSDSM0/2