Does anyone know how to remove an icon on Settings???
I tried seaching for a thread, I found an unanswered question similar to this, but it was under the HERMES thread, so I think this question needs to be on the General topic to have an answer.
which one..
nothin said:
which one..
Click to expand...
Click to collapse
Clear Storage for example.
cktlcmd said:
Clear Storage for example.
Click to expand...
Click to collapse
Your just trying to change the icon?
suspect he want to remove the item from settings
Rudegar said:
suspect he want to remove the item from settings
Click to expand...
Click to collapse
Yes, exactly what I want.
i can imagine, that reg removal will do the job IN THAT case, search there for clear storage:
HKLM\SOFTWARE\HTC\HTCCPL\
and/or
HKLM\ControlPanel\Clear Storage
there are two main methods for adding "settings" applets:
-from exe
-from cpl.
reg removal is useful for exe files ONLY(usually.,,).
nothin said:
i can imagine, that reg removal will do the job IN THAT case, search there for clear storage:
HKLM\SOFTWARE\HTC\HTCCPL\
and/or
HKLM\ControlPanel\Clear Storage
there are two main methods for adding "settings" applets:
-from exe
-from cpl.
reg removal is useful for exe files ONLY(usually.,,).
Click to expand...
Click to collapse
Thanks!
nothin said:
i can imagine, that reg removal will do the job IN THAT case, search there for clear storage:
HKLM\SOFTWARE\HTC\HTCCPL\
and/or
HKLM\ControlPanel\Clear Storage
there are two main methods for adding "settings" applets:
-from exe
-from cpl.
reg removal is useful for exe files ONLY(usually.,,).
Click to expand...
Click to collapse
LOL, I just saw this a few minutes ago. I would suggest trying to add the Key "Hide" with a DWORD value of 1.
How to do the opposite way? insert icon to one of the settingstab and start exe from there?
JOat said:
How to do the opposite way? insert icon to one of the settingstab and start exe from there?
Click to expand...
Click to collapse
What are you trying to add?
i tried a rom and there was secondtoday built in, so i tried to to the same with a official rom
Related
Hi,
When saving attachments from outlook you get a very annoying save as scrren which you specify where to install the files to.
Unfortunately this only allows you to choose storage card or main memory and then choose the first level folder.
What if you need to save to a lower level folder?
I did some searches on this forum but couldnt find anything but I can almost be certain this has been discussed. I remember there was a little utility that changed this save as screen to a proper tree level view save as screen....
does anyone have this?
Cheers...
FileDialogChanger.
V
vijay555 said:
FileDialogChanger.
V
Click to expand...
Click to collapse
Sorry Vijay I could not find this in the releases section of your site. Am I missing something.
d_ranade said:
Sorry Vijay I could not find this in the releases section of your site. Am I missing something.
Click to expand...
Click to collapse
You might have tried Google, you would have found the following answer in 0.36 seconds.
File Dialog Changer - v1.66
decknologist said:
You might have tried Google, you would have found the following answer in 0.36 seconds.
File Dialog Changer - v1.66
Click to expand...
Click to collapse
Thanks for the help. Downloaded and testing!
Bingo... exactly what I was looking for!
about a million times better than original save as screen...
RFF... it would be nice to have a new folder button!
Thanks for your help Vijay
Is there something to list the entire tree structure of the PPC and External Card Storage when you use the File --> Open in most programs?
For example, I store all my PDF's under \Storage Card\My Documents\E-Books\
When I use the File ---> Open Dialog in Adobe, it shows me very few directories. I'd like to be able to browse to any folder on the PPC in the Open File Dialog Box.
I hope somebody can help in this regard.
Faria and NTS seem to know this...
How do we get the extended rom to automatically run on Crossbow? I've searched Google and others and haven't found a thing. Is it a reg. setting or what?
jwzg said:
Faria and NTS seem to know this...
How do we get the extended rom to automatically run on Crossbow? I've searched Google and others and haven't found a thing. Is it a reg. setting or what?
Click to expand...
Click to collapse
Ok, you have an autorun.exe in the windows directory, and a config.txt file in the windows directory. The config.txt is the same as it was in WM5 just a location change. Have all your lines point to \extended_rom\ and youll be fine
Wrong thread I know - but I looked all over the place and can't seem to find the definitive answer ... so here goes - am I correct in assuming that it's possible to delete the contents of ext_rom once you've used them? I guess that they are only for installing into the "real" storage, and just as long as you don't need them following a hard reset, they are just taking up some space .. am I correct?
I'm working with orwell's. Those files aren't there, so what has to happen?
radiotrib said:
Wrong thread I know - but I looked all over the place and can't seem to find the definitive answer ... so here goes - am I correct in assuming that it's possible to delete the contents of ext_rom once you've used them? I guess that they are only for installing into the "real" storage, and just as long as you don't need them following a hard reset, they are just taking up some space .. am I correct?
Click to expand...
Click to collapse
No. In AKU 2.x and above, the extended rom partition is locked and cannot be written to and cannot have files deleted.
jwzg said:
I'm working with orwell's. Those files aren't there, so what has to happen?
Click to expand...
Click to collapse
If you are on orwells, you need to do it the WM5 way from what I understand.
nottoosmart said:
If you are on orwells, you need to do it the WM5 way from what I understand.
Click to expand...
Click to collapse
I'm not too smart either...can you give instructions?
In the system hive, (default.hv) you should have:
[HKEY_LOCAL_MACHINE\Comm]
"TurnRadioFlag"=dword:0
"AutoRunCFG"="\\Extended_ROM\\config.txt"
"AutoRun"="\\Extended_ROM\\autorun.exe"
Most of the WM6 ROMs are missing the last two keys, thus the Autorun of the Extended_ROM is disabled by default.
eluth said:
In the system hive, (default.hv) you should have:
[HKEY_LOCAL_MACHINE\Comm]
"TurnRadioFlag"=dword:0
"AutoRunCFG"="\\Extended_ROM\\config.txt"
"AutoRun"="\\Extended_ROM\\autorun.exe"
Most of the WM6 ROMs are missing the last two keys, thus the Autorun of the Extended_ROM is disabled by default.
Click to expand...
Click to collapse
in all honesty, you are wrong. Even if those lines are there, for some reason the checkautorun still looks in the windows directory for the config file and the autorun file. I have searched the whole default.hv and still cant figure out why. You figure it out and ill give you a cookie.
Hi everyone,
Maybe a silly question but i'm a beginner... after installing a cab on WM6 can i remove it to gain some memory ?
Great forum, i'm learning a lot here
add and remove programs in settings
Rudegar said:
add and remove programs in settings
Click to expand...
Click to collapse
Hi!
I don't think the original question was how to remove the program, but rather if the cab file can be removed (if I'm wrong I apologize, but I interpreted the question different).
Anyway, yes, you can safely remove the cab file from the device after installing it. To remove the installed program use the method described by Rudegar.
It may be wise to store the cab files on the storage card, so you have them available if you have to make a hard reset.
Regards,
PK
tks for the reply paalkr and yes that was my question. So i can delete or save the cabs on the storage card and will have no problems with my device if i understood well
tks again guys
Lesaumon said:
tks for the reply paalkr and yes that was my question. So i can delete or save the cabs on the storage card and will have no problems with my device if i understood well
tks again guys
Click to expand...
Click to collapse
Hi!
Thats correct! Put the cabs on the storage card. You can then install them from that location also, but I guess you already know that.
Regards,
PK
okay im using hku 070...What settings are everyone using?
theres:
Glyph cache (im using 16384)
file system cache (auto)
file system filter cache:8192
i've been playing around with a few diffrent settings...the higher up on the glyph and file stemfilter i go...the faster the device is...but it seems a lilttle unstable and slow to respond when turnign on...the settings im running now seems a bit faster than stock settings...but still reliable. thoughts?
Hi
Do you set these value by simple registry editor? or another tool?
I found GLYPHCACHE KEY in the registry, by a search but for the 2 others category what are the name of the keys to change ?
Jeffou75 said:
how can you reach 16384 for GLYPHCACHE value ? the limit values are in the registry from 0 to 2000 (0x2000) ??
Do you set these value by simple registry editor? or another tool?
Click to expand...
Click to collapse
0-2000 is hex
2000=32768
i use sk tools for registry editing
gregross said:
0-2000 is hex
2000=32768
i use sk tools for registry editing
Click to expand...
Click to collapse
sorry but i found before i post then i edited my post, my real question is:
I found GLYPHCACHE KEY in the registry, by a search but for the 2 others category what are the name of the keys to change ?
i use resco registry editor
Jeffou75 said:
sorry but i found before i post then i edited my post, my real question is:
I found GLYPHCACHE KEY in the registry, by a search but for the 2 others category what are the name of the keys to change ?
i use resco registry editor
Click to expand...
Click to collapse
\HKLM\System\StorageManager\FATFS\EnableCache
\HKLM\System\StorageManager\FATFS\CacheSize
are the two for file system
not sure about the filter one
Ah... i found these keys
but what you try to mean is that sk tools allow you to modify directly these settings without do any search in the registry? right?
because in taht case the best i can do first is try sktool, no?
Jeffou75 said:
Ah... i found these keys
but what you try to mean is that sk tools allow you to modify directly these settings without do any search in the registry? right?
because in taht case the best i can do first is try sktool, no?
Click to expand...
Click to collapse
sk tools will allow you to navigate to the keys and change their values
ok thanks i try an i give you feedback
heres the app. install and select the performance tab.
new setup...i think i like this one the best....
Glyph cache (im using 16384)
file system cache (auto)
file system filter cache:0
i have an error when i try to launch htat program on my HTC kaiser
Could you help?
rzanology said:
heres the app. install and select the performance tab.
new setup...i think i like this one the best....
Glyph cache (im using 16384)
file system cache (auto)
file system filter cache:0
Click to expand...
Click to collapse
thanks
somehow I don't feel any different. I am still running the HTC rom, and it is already pretty fast....
Jeffou75 said:
i have an error when i try to launch htat program on my HTC kaiser
Could you help?
Click to expand...
Click to collapse
i have an error too, but looks like no-one can/know how to help
advancedconfig.exe
invalidcastexception
in system.convert.toint32()
in advancedconfig..()
in advancedconfig..()
in system.windows.forms.form.onload()
in system.windows.forms.form._setvisiblenotify()
in system.windows.forms.control.set_visible()
in system.windows.forms.application.run()
in advancedconfig..()
Click to expand...
Click to collapse
Advanced config tool
To run it well, requires net compact framework v 3.5. Make sure you have this version.
Cheers..
Jeffou75 said:
i have an error when i try to launch htat program on my HTC kaiser
Could you help?
Click to expand...
Click to collapse
To run it well, requires net compact framework v 3.5. Make sure you have this version.
Cheers..
________
Wow, u have succesfully revived almost 2 years dead thread.
Let's make dead threads stay dead. Closed.
first- I tried searching but I am on my phone and it is a very long process.
I want to create a short cut to the start menu in windows mobile 6.5 but I cannot find the .exe for the start menu. can any one point me in the right direction?
thanks in advance.
\windows\start menu\
all shortcuts places there will show up there
misunderstood
Rudegar said:
\windows\start menu\
all shortcuts places there will show up there
Click to expand...
Click to collapse
sorry I guess I didn't word that right . I don't want to create a shortcut that goes in my start menu. I want to create a shortcut that points to my start menu. so I need the executable for the start menu button.
Unzip and copy to device.
dwizzy130
perfect!
dwizzy130 said:
Unzip and copy to device.
dwizzy130
Click to expand...
Click to collapse
dwizzy- thank you so much. exactly what i was looking for. if you get a moment and you don't mind, could you still share with me the path to the executable (if there is one) just for knowledge sake.
again- thank you so much. i am a noob. so trying to learn.
maisonpulaski said:
dwizzy- thank you so much. exactly what i was looking for. if you get a moment and you don't mind, could you still share with me the path to the executable (if there is one) just for knowledge sake.
again- thank you so much. i am a noob. so trying to learn.
Click to expand...
Click to collapse
No problem man!
The path? You can put it anywhere and run it and it will work...
dwizzy130
i failed again.
dwizzy130 said:
No problem man!
The path? You can put it anywhere and run it and it will work...
dwizzy130
Click to expand...
Click to collapse
sorry- i guess i just don't communicate good. yes the shortcut you provided me with worts great i am using it now.
do you know where the actual start button executable is located in my file directory and what the name of it is?
for instance: My Device\Windows\Start Menu\Programs\Start.exe
Hope i got my meaning across more clearly.
maisonpulaski said:
sorry- i guess i just don't communicate good. yes the shortcut you provided me with worts great i am using it now.
do you know where the actual start button executable is located in my file directory and what the name of it is?
for instance: My Device\Windows\Start Menu\Programs\Start.exe
Hope i got my meaning across more clearly.
Click to expand...
Click to collapse
What I gave you is not a shortcut. It is an executable that runs a command to open the start menu. There is no native startmenu.exe in WM.
dwizzy130
ah ha.
dwizzy130 said:
What I gave you is not a shortcut. It is an executable that runs a command to open the start menu. There is no native startmenu.exe in WM.
dwizzy130
Click to expand...
Click to collapse
gothca. thank you for the clarification.
Open Start Menu subfolders
dwizzy130 said:
Unzip and copy to device.
dwizzy130
Click to expand...
Click to collapse
Is it possible to pass a parameter to this programm to open subfolders within Start Menu eg. Games folder