Related
Hi everyone,
i'm about to buy a mda compact. The seller says that he tried to update rom and the mda now is blocked with a screen USB/SERIAL V1.00
If I upgrade the rom how is described in the other topic is ok?
I had to say to know if i buy this one or no
I wait fiducious in your answers :lol:
HELLO
This device is only in bootloader mode so you can reflash it without problem.
There is a lot of topics in this forum to perform that. :wink:
I had to do a "simply" rom upgrade or some different operation? :?:
I have find that post on this forum http://forum.xda-developers.com/viewtopic.php?t=14973&postdays=0&postorder=asc&start=0
i had to what is described on it?
Beware though. I had once screwed my MDA during an upgrade and all it did was start iself in the bootloader mode. For some reason, I couldnt re-flash any ROM onto the machine and had to took it back to t-mobile and they replaced a new unit for me.
Mmm... this is a bad new... anyone help?
i had this problem too, all i did was kept trying to different roms till one finally worked
i Downloaded all the rom from the FTP site
1 finally worked then after that, i updated to the 1.12 Imate rom...
Can not tell you which one worked, but i had to copy it to a Memory card to do it
Maybe if you try the Windows Installers, 1 might work
hi Herian..
1st of all,as the guys said,ur phone is in bootloader mode....it's not a problem,so don't be affraid :wink:
if u have'nt performed a flash before,am gonna try avoiding u flashing unless it's the last resort...
so bro,do the following:
1-remove the battery and leave ur PDA more than 2 hours without battery(u don't need 2 hours but am taking it to the limit),so that the backup battery will drain,all old data in RAM will be lost...put the battery again...and:if it restarts and enters OS,then congratulations,but if it doesn't,so u have to go to step 2.
2-reflash ur device:
-althought ur device is a Magician(at least this is what i think),all the procedures mentioned in my post(here's the link :wink: ) http://forum.xda-developers.com/viewtopic.php?t=25830&highlight= should work with no problem,the main difference wil be entering the bootloader mode,but since ur already in it :wink: ,it not a problem anymore,this is why you have to follow my instructions starting with step 2(the link,ok).
my advice for u will be to download the 1.12.00WWE ROM from the ftp,coz it's the last one,and good luck bro
tell us the news,or pm me anytime,it will be my pleasure to help u
RAGO :lol:
First of all: hello, I am new here
I just got a Magician (MDA compact) and tried to update it. But it failed and now it is in the bootloader mode. When I try a new update, it stops in step 1 after a few minutes. On the Magician you can see "upgrade radio stack, please wait".
Any ideas? I am a little bit confused, so much money and now it doesnt't work
hi COnker..
u must upgrade ur device with the right OS,ur case happens when u try to upgrade with a different OS(eg:upgrading a magician with a Himalaya ROM),but with the same operator(eg:i-mate jam upgraded with i-mate PDA ROM,u pass country ID error,and run ClearJmpCode.exe,and it ends by a dead jam in bootloader mode... :wink: ).
so my friend,what u have to do,is to go to ftp,and search for a ROM update made specifically for Magician(try 1.12.00WWE),then follow my instruction in the above topic.....
good luck
RAGO :lol:
Noway
I had tryed several times whit a lot of MaUpgrade(finded on the ftp site) but noway... The upgrade show me a window with the version of current rom and the version of the upgrade rom... but is empty! Then, if i click on upgrade, after a few minutes the mdac shut down and the program give me a 150 error... i don't know what i have to do...
I have read in some post here that is possible to do a backup of rom on sd card and to restore it.
If some good guy send me his backup files can i relive my mdac?
Hi,
I had the same problem but i have found a way without upgrade it.
1. pull out your battery.
2. put in your charger ( not usb )
3. put in your battery and then again pull out your battery and then again put in your battery.
4. now you will see the phone is starting up and if you have calibrate your screen and the rest the phone gonna install allot of stuff but when its installing everything pull out your battery and charger.
5. put in your battery and press the power button and congratulations your phone is working again.
sorry for my english i am from belgium xD
Sorry wrong post...
Not seen the second page
Hi there,
My currently installed Rom was RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe. (thank you jester for you good job)
Nevertheless, this ROM is in English and I wanted to downgrade to a French One before the selling of my device.
I have tried to install the downgrade kit detailed in this topic : http://forum.xda-developers.com/showthread.php?t=267344
The first step went OK but while trying to make the secnd step, my qtek is blocked at the boot splash screen showing the Jesterz picture and red information about the SPL and so on on the upper left corner... without starting... The USB connexion is not detected so I can't do anything... While trying to install any ROM, the USB connection is not detected ang I get an error message...
Did I kill my phone ?
Please help ! Tell me that it's not dead....
Don't worry, its nowhere close to being dead. If you have superCid, then use the SD card image to restore in bootloader mode. However, if the Cid is locked, then you would need a utility that can unlock Cid without Activesync mode (coz in your case, you would not be able to get an Activesync connection). imei-check.co.uk has a utility ($38 i guess) that unlocks Cid in bootloader.--- else show it to a professional. (in my country, I would have to shell out around $20 to get such a problem fixed at a mobile repair shop)
illanz said:
... The USB connexion is not detected so I can't do anything... While trying to install any ROM, the USB connection is not detected ang I get an error message...
Did I kill my phone ?
Please help ! Tell me that it's not dead....
Click to expand...
Click to collapse
Just take out the battery for about 10 minutes and re-insert. If it does not re-start, do a soft resert with the stylus and hopefully you should be fine
Hy,please help!
after downgrade, it doesnt work anymore.... i mean... i cant start the mobile!
after the downgrade i disable the USB data cable and now the mobile is dead... it doesnt starts from the ON/OFF Button and even if i connect the USB cable it makes nothing! No Led on... nothing! absolutly DEAD!!!
I have tried to put off the battery all night long with no result.. but I have achieved to reach the bootloader mode by pressing the camera button while soft reseting and keeping the camera button pushed...
OMG, I have been so scared ! ! !
Try this in order to reach the bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and KEEP PRESSING camara button till appear the Boot Loader.)
it doesnt work
I seem to have a simular problem. this is my post in another topic. It seems to fit better here.
This is what I tired so far:....
I used the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID and it often hangs and was slow with Push Email over GPRS.
I tried to find a way to downgrade but hadn't had time sofar. When I logged on XDA Developers Site I saw there was a new Image.
So I thought Great I dont need to find how to downgrade.
I don't know what G4 and G3 is so as everybody let's try the higest best one.
I uploaded the RUU-Prophet-G4-AKU3.3-Jester-b1
Wrong...
Now as previously stated I get to the multicolor screen with IPL 2.09 and the SPL 2.20..0001 on the screen and that's it.
I can get to the bootloader and load the same image again and get the same result.
I can load another image on and it loads to 80 Percent and says error [326] Invalid Command This NBF cannot be used with your PDA Phone. Please check your NBF file.
If I try an older Version it tells me upgrad only
And when I try to upload the G3 version it tells me error[300] invalid upgrade tool. This upgrade utility canot be used for your PDA Phone. Please get newer Upgrade utility.
Trying to use the nf.nbf or the G3 with the ROMUpdateUtility_NoID of the G4 doesn't work either.
If I would like to do the downgrade tool I need a Active Sync connection which I don't have.
I have no more thoughts. Please Help.
If you would have just read the forums better you would have known if your device is a G3 or a G4. (read this!).
Now it appears you have tried both for an update. Which may possibly have bricked your phone.
But... first things first. Can you get into the bootloader? (read wiki HERE on how to do that).
If you can still get into the bootloader then there is still a possibility for updating.
Try upgrading with the latest Qtek rom (note: this is an official rom, this one works for both G3 and G4! And since it's the latest you should be able to upgrade to this one).
Instructions quoted from another post of me:
You could try the 2.20 qtek rom which seems to be working well for quite some people (found here).
Although you have to make sure you read that thread good and use the ROMUpdateUtility_NoID.exe (found here ) to upgrade.
Update instructions:
1: With the qtek 2.20 rom you need to extract the zip and the exe file in the zip with WinRAR.
2: Then there is one folder called 'OutputFile' and a folder called 'RUU_TOOLS'.
Inside the RUU_TOOLS there is prophet and in that one WWE, when you go through them and in the WWE folder you see a bunch of files (readme.doc, enterbootloader.exe etc etc).
You need to copy ROMUpdateUtility_NoID.exe to the WWE folder with all the files. And you also need to copy the 'nk.nbf' file to the WWE folder (from the 'OutputFile' folder).
3: And then you need to put your phone in bootloader mode and run ROMUpdateUtility_NoID.exe to upgrade, which should work nicely then.
Click to expand...
Click to collapse
This should give you a good enough idea of what to do. This should work (new rom combined with no NoID updater).
However, if it's impossible to get yourself into the bootloader your options of upgrading your device are getting smaller.
Downgrading of a complete rom is only possible on a CID unlocked G3 (when it's CID unlocked you would know! because you would have done that yourself) and not on a G4 device.
Flasing a G3 device with a G4 rom or G4 device with a G3 rom might possibly turn your phone into a brick. This can easily be avoided by reading the forums properly and know what you are doing.
If anything (even if it's a small thing) is not completely clear to you about upgrading/downgrading your device I'd recommend not doing so.
edit: oh yeah... if you have a G4 device (which you should know by now) you cannot downgrade from this rom (well, only via a payed online service). And when you have a G3 device you could try and CID unlock it (read wiki + forums) before you want to downgrade, or don't downgrade at all.
But whatever you do, don't try to downgrade it without doing any of those things because you'll get into trouble. (to put it down bluntly)
illanz said:
I have tried to put off the battery all night long with no result.. but I have achieved to reach the bootloader mode by pressing the camera button while soft reseting and keeping the camera button pushed...
OMG, I have been so scared ! ! !
Click to expand...
Click to collapse
If you have reached the bootloader screen, just run my installer (or any official ROM) to get your phone working again.
My Prophet Died
I need help, to restore my Prophet, i upgrade wrong rom, i need will try the SD Backup, where can i see this process ?
Sorry my Inglish is too bad.
I've merged a couple of threads under this one, as they are all about the same problem (mostly)
Opening a new thread for the same problem isnt very useful
Hi RaptorRVL
Thank you very much for your patience in resuming all this for me.
I do try to read the forum but it isn't like a manual where you find the procedure stepby step. Like the G3 and G4 version I have newer come across until now. Sorry.
I tried the image you metioned and I have the result that at 80% it tells me error [326] Invalid Command This NBF cannot be used with your PDA Phone. Please check your NBF file
Any more thoughts?
As you seem to be an expert Can you let me know more about goldcard solution.
Cheers
Mick
From a readme I once found inside an update:
* ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse
Doesn't sound too good really. Maybe someone else here on the forums know what to do with this error :/
You did use the ROMUpdateUtility_NoID.exe and not the normal updater right? Can remember someone getting a similar error when using the wrong updater, but I'm not sure about that though...
edit: try doing a search on the prophet forums for "INVALID COMMAND" maybe there is a helpful post in there somewhere...
THANKS!! I was worried b/c i had the same problem today. I've been looking for so many threads abt this problem. Thanks for ur help guys!
same problem
so i have the same problem. I want to downgrade and it break at 95% invalid file. But now XDA is still alive. I can`t go into the bootloader but i tried this file: RUU_Prophet_220734_2207114_024721_NVID.exe
and now my Prophet is still running again. Hope i can help you. Good luck.
peter paul
P.S. sorry for my english, but its good to learn it again
eventually i want to have roms or whatever those are so i can have the "cube" themes on my phone..
did the kaiserunlocker.exe to unlock both my cid/sim
step 1 worked fine
*step 2 (unlock radio) after the phone rebooted the phone will not go past the white screen, so i took out the battery, hard reset, etc and now it just goes to a blank screen after the 3G animation.
how do i fix this?? I am currently in brickloader mode and have no idea what to do. It says:
KAIS1*0 MFG
SPL-1.0.OliPofCPLD-8
thanks!! (and yes ive searched, everythings either too confusing or dont know where to start!)
BTW the stock number was 1.62.502.0 before i did step 1
theromanone said:
how do i fix this?? I am currently in brickloader mode and have no idea what to do. It says:
KAIS1*0 MFG
SPL-1.0.OliPofCPLD-8
Click to expand...
Click to collapse
if u can see the boatloader screen & see USB when ur cable is connected, just flash ur shipped rom back.
i had the same problem read my forum.xda-developers.com/showthread.php?t=410932
good luck i hope you wrote down your radio before you started
thanks for the quick reply!
i went to the shipped rom wiki but dont know what one to download out of:
3.53.502.0 (Radio 1.65.20.29) ALMOST OFFICIAL II
OR
3.51.502.0 (Radio 1.65.17.10) ALMOST OFFICIAL I
? or is there something else to download?
and it is really as simple as just connecting usb, and clicking the file on the computer? that'd be awesome.
ron999 said:
i had the same problem read my forum.xda-developers.com/showthread.php?t=410932
good luck i hope you wrote down your radio before you started
Click to expand...
Click to collapse
pretty sure it was 1.62.502.0.. but cant find that anywhere!
btw that's a great thread thanks!
check out http://forum.xda-developers.com/showthread.php?t=393182&highlight=download+radio
thanks again, but what i found was:
.62.502.0 (radio 1.27.14.09) OFFICIAL UPDATE 15 FEB 08 found here http://forum.xda-developers.com/showthread.php?t=368680
i thought my phone came with 6.1 though? should i just flash with that rom anyway?
Just flash it mate. see can or cannot. then u can select other rom & flash if everything is ok . dont forget to try out ROMeOS (some kind of advertisement)
the easy way i did was flash back my radio and it all boot up well i had got my 8925 back to life then i did eveything again read my post you see what i mean
do the radio 1.27.14.09 and see what happen i had the same problem this morning new 8925 and bricked it, but no its the radio problem
i tried your method, both by having the usb connected and disconnected after getting the tri-color screen, soft reseting to power on the phone, entering 12345678 and enter.. but no code shows up. did you really mean to write to to uncheck USB connections when youre trying to get the code to show up on the computer? anything would help, thanks!
theromanone said:
eventually i want to have roms or whatever those are so i can have the "cube" themes on my phone..
did the kaiserunlocker.exe to unlock both my cid/sim
step 1 worked fine
*step 2 (unlock radio) after the phone rebooted the phone will not go past the white screen, so i took out the battery, hard reset, etc and now it just goes to a blank screen after the 3G animation.
how do i fix this?? I am currently in brickloader mode and have no idea what to do. It says:
KAIS1*0 MFG
SPL-1.0.OliPofCPLD-8
thanks!! (and yes ive searched, everythings either too confusing or dont know where to start!)
BTW the stock number was 1.62.502.0 before i did step 1
Click to expand...
Click to collapse
I did the same thing...you need to flash a 6.1 Rom and then it will boot up normal. Turn your phone on and let it boot to the black screen wait a minute then connect active sync and it should sync then you can flash the 6.1 rom and finish the unlocking starting at step 2 again and it will work.
is WM 6 the same as 6.1?? i found only one shipped (OEM) roms (that matches my 1.62.502.0 that I was notified I had in the first step of kaiserunlocker) for the AT&T WM6.0 in the wiki
theromanone said:
is WM 6 the same as 6.1?? i found only one shipped (OEM) roms (that matches my 1.62.502.0 that I was notified I had in the first step of kaiserunlocker) for the AT&T WM6.0 in the wiki
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
thanks, that's where i went and i'm loading the 1.62.502.0 (radio 1.27.14.09) as of now, well see what happens.. if that doesnt work i'll try reloading just the radio part.. if that doesnt work i'll do?
.. is the 1.62.502.0 number my actual rom number or just the thing i upgraded to using kaiserunlocker? i just thought of that.
EDIT: ok, after installing the 1.62.502.0 thing from the wiki, the windows mobile green/blue screen showed up, aaand.. holy crap it's doing the same installation it did earlier today when i turned the phone on for the very first time!
Btw Thanks!
theromanone said:
thanks, that's where i went and i'm loading the 1.62.502.0 (radio 1.27.14.09) as of now, well see what happens.. if that doesnt work i'll try reloading just the radio part.. if that doesnt work i'll do?
.. is the 1.62.502.0 number my actual rom number or just the thing i upgraded to using kaiserunlocker? i just thought of that.
EDIT: ok, after installing the 1.62.502.0 thing from the wiki, the windows mobile green/blue screen showed up, aaand.. holy crap it's doing the same installation it did earlier today when i turned the phone on for the very first time!
Click to expand...
Click to collapse
Good to see youve unbricked your phone!
Happy flashing!!!!
ya do the uncheck and you see the code on the computer
i had the very same problem it something to do with radio
nice to see you done it
if it still not sim unlock then do it again from step 1
which will go black screen
then step 2 still black screen
don t forget to uncheck the usb
get the code on computer (write it down)
do step 3 flash your your radio the one you just done
then after the 8925 boots up put in your code and its unlocked
do same thing with cid unlock
ley me know how it went
theromanone said:
thanks, that's where i went and i'm loading the 1.62.502.0 (radio 1.27.14.09) as of now, well see what happens.. if that doesnt work i'll try reloading just the radio part.. if that doesnt work i'll do?
.. is the 1.62.502.0 number my actual rom number or just the thing i upgraded to using kaiserunlocker? i just thought of that.
EDIT: ok, after installing the 1.62.502.0 thing from the wiki, the windows mobile green/blue screen showed up, aaand.. holy crap it's doing the same installation it did earlier today when i turned the phone on for the very first time!
Click to expand...
Click to collapse
ok put in a sim card and see if it unlocked if not start all over again
let me know what happens
theromanone said:
i tried your method, both by having the usb connected and disconnected after getting the tri-color screen, soft reseting to power on the phone, entering 12345678 and enter.. but no code shows up. did you really mean to write to to uncheck USB connections when youre trying to get the code to show up on the computer? anything would help, thanks!
Click to expand...
Click to collapse
yes uncheck usb for the new code to display on the computer screen
Dear All,
Please kindly help me out of this.
Yesterday, My phone started to develop the "NO GSM: symptoms. At first, the phone ioccasionally turned off after it couldn't connect to the 3G network. Today, after reading nearly all the post concerning this "No GSM" symptoms, I applied the Mtty tools to desparately try to bring my beloved Uni back to life.
I applied that mtty.. I tried to upgrade it by using the shipped rom.. yet it said country ID error.. I reverted to use the MaUpgradeUt_noID.exe but the radio rom upgrade failed....
Are there any other solutions I can rescue my uni? I read it here http://forum.xda-developers.com/showthread.php?t=350349 that Radio Rom upgrade may be done through a SD card but the ftp link is dead and I can't get any files from there.
I miss my Uni so so much that I think I would buy another one if there's no way to save it... Please kindly help. all my gratitude.
Hi,
Please consider a new battery.
As strange as it may sound, one of my MDA Pro's had similar symptoms with battery at 70%. Replacing the battery with a new one fixed it right away.
The symptoms were:
- less network signal
- random turning off of radio
- could not access phone settings
- radio crash when trying GPRS connection
Also, on my other MDA Pro, I had problems like this, but they were caused by radio ROM 1.18. I changed to 1.15 and everything is fine since.
It seems that aging batteries are a major problem for weird issues. Just buy a new one at ebay and dont start flashing as a fool, cause you can risk a brick.
Cheers,
vma
My battery is actually new... just bought it 2 weeks ago.. and I tried the phone with both my new and old batt. still no luck -_-
I can't flash any radio rom now... is my Uni certified dead?
Any help would be great.. thanks
Try charging the battery first in another universal if possible, if battery is ok, put it in and try again, read Wiki and check if you can go to boot loader mode, check whether pc recognising the Uni once on etc.,
Read everything and the computer recognised my Uni ... tried MTTY tools to reset all the DOC partition in my Uni yet no way to reflash my radio rom again
I think as long as PC is recognising, dont consider it as DEAD. Its very much alive and keep hopes.
as I read through this forum, Radio ROM flashing is the most risky thing and often takes longer.
If you are not already considering, try only flashing radio rom and do not club with extrom etc, try redownloading the ROM or try a different version from a different link, unless you are particular about the one you are trying.
Always use the original USB cable supplied with the Uni.
Enter BootLoader mode by pressing and holding the power button and backlight button whilst performing a reset with the stylus. Connect Unit to PC to the USB port directly and not through a USB HUB.
Start flash again..
All the best
ronaldphl said:
Dear All,
Please kindly help me out of this.
Yesterday, My phone started to develop the "NO GSM: symptoms. At first, the phone ioccasionally turned off after it couldn't connect to the 3G network. Today, after reading nearly all the post concerning this "No GSM" symptoms, I applied the Mtty tools to desparately try to bring my beloved Uni back to life.
I applied that mtty.. I tried to upgrade it by using the shipped rom.. yet it said country ID error.. I reverted to use the MaUpgradeUt_noID.exe but the radio rom upgrade failed....
Are there any other solutions I can rescue my uni? I read it here http://forum.xda-developers.com/showthread.php?t=350349 that Radio Rom upgrade may be done through a SD card but the ftp link is dead and I can't get any files from there.
I miss my Uni so so much that I think I would buy another one if there's no way to save it... Please kindly help. all my gratitude.
Click to expand...
Click to collapse
From the problem behavior it seems your device got GSM locked, I'm afraid it's permanent. But at least try ...
1. Remove the SIM card
2. Must upgrade the bootloaded to 1.01 if it's a G3 (and not upgraded already).
3. Run the Buzz's CID unlocker tool and flash the radio (version 0.00) provided with the tool.
4. Do the HR and check the status
I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!
First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.
Thanks 4 the reply... I will have a go and see what happens.
I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????
Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?
Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !