This should work for many HTC models having trouble pairing with Infini BT handsfree included in the DVD Nav system.
Start the pairing as shown in the Infiniti handbook.
When the Touch Pro says it has paired but the Infiniti just hangs on the connection screen, make an outgoing call (anywhere wiil do, why not call the girl/wife for a change ) and pairing will complete.
If you have had a previous phone paired to the Infiniti, you may need to actually select the HTC from the phone settings menu on the Infiniti.
Incoming and outgoing calls will work OK then.
Phonebook entries can only be sent one by one by setting the Infiniti to receive a contact and then 'Beaming' one from your contact list as you would to another phone.
Related
Hi!! I have some problem with my vox + HBH-DS970 headset. I can't redirect incoming call sound from phone to headset
With my previous phone i change "capability" parameter (4-th bit by 0, like 110101)
But "capability" parameter in Vox is 7 bits lenght!
I'll try to set 1110101 (117) and 110101 (53), but it doesn't work!
while incoming call, i hear phone but not headset
Anyone can help me with advice?
bt headset prob
I have an xda2 i and I have the problem that even when the headet is connected, at times an incoming call won't broadcast over the headset at all, and equally if i dial out the call doesn't transfer to the headset.
Curiously, I've found the solution is to go into bluetooth manager -->active connections--> and click on STATUS of the head set connected. it should show signal strength and such. I double click on the CONNECTED message (oor maybe somewhere on the screen, basically double tap until it reads NOT CONNECTED ..... as odd as it sounds... this is what i needed... as when I do this, it usually works ok for me.
Maybe it will help?
..........IB a n e
this is smart, so there is no any bluetooth manager on it
and my headset can play any sound from phone because it is A2DP and i'm continuosly use it
i have one way to solve this - JetWare BT-Extension. In this programm i can check "use phone ringtones" and that works OK
but program unstable, so i want to get this future by regisrty edit
I am using the HBH-DS980 bluetooth headset with my Nokia 6300 phone. I desperately need on the following questions,
1. After pairing and connecting, the contacts lists shows up as empty in the headset. How can I enable the bluetooth headset to read my phone's contacts?
2. When I receive a call the caller ID only shows the number of the caller and not his/her name as stored in the contacts. How can I fix this?
3. The auto-connect feature doesnt seem to work well. After connection, if I take my phone away from range for a while and then come back the re-connection does not happen automatically after any amount of time. I have set my phone to auto-connect with Bluetooth headset without confirmation. Still it does not work. How can I fix this.
Please help.
On this site people talk mostly about Windows Mobile phones made by HTC and AFAIK this is not the case with the Nokia 6300... (I could be wrong and this wouldn't be the first time).
I suggest you post your questions at Nokia Discussions or Esato.
Hey folks,
I have a couple of questions regarding the bluetooth hands free profile and Caller ID and Contacts.
First issue: I use a Garmin Nuvi 760 as a speakerphone in my car via the hands free bluetooth profile. The 760 can't access the recent calls on my HTC Polaris (Touch Cruise) running the official WM 6.1 ROM...it just says, "no data available" when I try to access it. My old phone (T-Mobile MDA / HTC Wizard with the official WM 5 ROM) worked fine. The Wizard happily sent my recent call data to the GPS. If I remember correctly, the Wizard would prompt me the first time the GPS tried to access the call data, and then it just worked after that until I deleted the bluetooth device pairing. When I receive a call the Wizard also sent the name from my contacts to the Caller ID display on the 760, and my Polaris doesn't...it just sends the phone number of the incoming call.
Second issue: at home I use a XLink BT bluetooth hub to use my "land line" phones with my Polaris. It also uses the hands free bluetooth profile to connect to the phone and then emulates a "land line" for my other phones via my home telephone wiring. When I receive a call through the XLink I also don't get the caller name along with the Caller ID data...it just sends the phone number. I also have my girlfriend's 4 year old Motorola Razr v3 connected to the XLink hub and the contact name data comes through to the cordless "land line" handset just fine on the Razr.
I'm pretty sure these issues are connected, and I'm also pretty sure that there must be a setting somewhere on my Polaris to allow this to work, but so far I haven't been able to find it. Do any of you guys know of a setting or registry key that will allow me to enable this functionality? I'd really appreciate some advice.
Thanks!
Enable SAP Settings?
Hi
I think that this may be an issue to do with "SAP" or Remote SIM Access in bluetooth settings.
Cheers
andrew-in-woking
andrew-in-woking said:
Hi
I think that this may be an issue to do with "SAP" or Remote SIM Access in bluetooth settings.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
Thank you for the reply. Unfortunately Remote SIM Access is already on...I swear I've tried every setting I could find to try to figure this out.
Yeah, something is definitely just turned off somewhere (probably in the registry). I can dial from my phonebook from my nuvi via the handsfree bluetooth profile with my old phone (Wizard), but when I connect with my Polaris the option to dial from the phonebook is disabled (grayed out). Something is explicitly disabled somewhere...I just need to figure out which registry keys I need to change.
I'm really surprised I'm having such a hard time finding this info on the 'net.
I have an interesting issue while using a Kitchen with Tachi Dialer (HTC Touch Pro)
I use a bluetooth headset almost everytime I make a call (I hate the handset as an actual phone)
It happens when I realize the wrong number has been dialed or the like (which also happens on occasion that it redials instead of dialing a selected number)
When I hit the end call button or the hard end button, the phone will think it has ended the call BUT the bluetooth headset is still in the call and the person can still pickup and talk. The headset cannot end the call and the soft and hard buttons also do not work.
The only way to end the call is to actually reset the phone or wait after the other end hangs up.
This seems to happen most if I end the call between dialing and when the headset establishes an active connection. (from the passive state)
I have 3 headsets:
Plantronics Voyager Pro
Voyager 815
Motorola H700
Any ideas?
Thanks,
Osiris
Hi!
just got the zeblaze crystal watch, it's pretee cool.
just got a prob.
The watch got a speaker and mic for phone calls, and caller id, when I connecting a bt headset, i have to disable phone audio in the bt setting of the watch on phone, after that can connect the earpice. but then the caller id on watch not showing too.
i tryed it on iphone, and it connects to the both paralely, i can choose from where ti answer.
is there any idea what can I do?
I see that you have found the correct section in which to post your question
Good luck!