Database Info

WiFi on/off from Icon?

In Faria's AKU 3.3 ROM I could click the WiFi/Sync Icon next to the GSM signal strength Icon and select turn on WiFi. With the WM6 ROM I don't have this option. I have searched but it's a bit difficult to state that in the search terms.....
I assume this is a registry tweak but don't know which.....
Anyone know?
Andy

Turn on wifi
You must have wifi-init.ink in starup folder. Then go to
HKLM/Comm/Tnetwln1/Parms/HTCPreloadstatus --> 1
HKLM/Comm/Tnetwln1/Parms/HTCPreloadWIFI --> 1
the you can start by icon. But like in every wm6 rom you only have the possibility turn on wifi. but not to turn off!!
Keep trying

papamopps said:
You must have wifi-init.ink in starup folder. Then go to
HKLM/Comm/Tnetwln1/Parms/HTCPreloadstatus --> 1
HKLM/Comm/Tnetwln1/Parms/HTCPreloadWIFI --> 1
the you can start by icon. But like in every wm6 rom you only have the possibility turn on wifi. but not to turn off!!
Keep trying
Click to expand...
Click to collapse
Thanks for that. I have wifi-init.lnk already in the startup folder, I have made the registry change but it doesn't stick.... I made the registry change with Task Manager, exited and verified again with Task Manager the change was present. I left the wizard for a few minutes and soft reset. The option isn't there and if I look in the registry the setting for HTCPreloadStatus is back at 0
I have tried this a couple of times now and I get the same results. Before anyone states the obvious I have left the Wizard for several minutes after making the registry change before soft resetting.
Andy

Total commander
I made it with total commander and after e few moments I power off by using the Powerbutton pressed for 5 seconds. That´s all. After that you can use programs like AEButton to toggle wifi on/off by hardwarebutton.

does anyone have a screenshot of the 750 with the htc home plug in

just curious?

Looks cool
HTC home screen plug in looks amazingly good on the 750 and functionally is one of my favorites plug ins (stylus free operation). Unfortunately, it partially screws up 750 hardware buttons assigned functions. For example, to to hang up a call you have to press OK button instead of red power on/off, to place a call you have to press central "select" button instead of green "call". Soft keys are OK.
I guess the plug in is originally designed for Hermes, worked fine on my previous 8525.

Treo 750 with HTC Plugin
1. Install WM6 ATT ROM Update.
2. Install HTC Plugin Install.
3. Enable "Dial Lookup" and "HTC Home" Plugins.
4. Enable "Hide lookup Field" Option from Menu -> Preferences.
5. Modify a value on the registry:
HKLM\Software\Microsoft\Today\Items\HTC Home\Type
and change the value of "type" to 4.
6. Modify a value on the registry:
HKLM\Software\Microsoft\Today\Items\Dial Lookup\Type
and change the value of "type" to 4.
This enabled you to move "Dial Lookup" plugin above "HTC Home" plugin.
7. Goto
HKLM/software/microsoft/shell - new dword ShowTitleBarClock with value=1
This will force the clock to show instead of two battery icon on the top bar.
Enjoy.

thanks im gonna try it

Will the today call activation screen still work or will the HTC Home stay up during calls?

Where can i download the HTC Home plugin??? Thanx in advance!

htc plugin attached.
HTC Plugin is attached.

problem
where can i find the registry?

abetreo750 said:
1. Install WM6 ATT ROM Update.
2. Install HTC Plugin Install.
3. Enable "Dial Lookup" and "HTC Home" Plugins.
4. Enable "Hide lookup Field" Option from Menu -> Preferences.
5. Modify a value on the registry:
HKLM\Software\Microsoft\Today\Items\HTC Home\Type
and change the value of "type" to 4.
6. Modify a value on the registry:
HKLM\Software\Microsoft\Today\Items\Dial Lookup\Type
and change the value of "type" to 4.
This enabled you to move "Dial Lookup" plugin above "HTC Home" plugin.
7. Goto
HKLM/software/microsoft/shell - new dword ShowTitleBarClock with value=1
This will force the clock to show instead of two battery icon on the top bar.
Enjoy.
Click to expand...
Click to collapse
HKLM\Software\Microsoft\Today\Items\HTC Home\Type
and change the value of "type" to 4.
6. Modify a value on the registry:
HKLM\Software\Microsoft\Today\Items\Dial Lookup\Type
and change the value of "type" to 4.
where can i find those?
pls

use regedit and look in the registry
use regedit and look in the registry

Can't seem to get the second battery off. There was already a ShowTitleBarClock on the directory specified. Whatto do? NEVERmind Reset device now gone. thanks I was looking for the 5 tab already had the 3 tab thanks alot.

Can someone build a cab with the latest 5 tab HTC Home screen with the reg edits already applied? If someone sends me the appropriate files/reg entries, I am happy to build the cab...I dont even have a Treo - doing this for a friend!
MJB

also when I go to change my weather city there is no cities to choose from. It never populates. Hoe can I change my city in the accuweather app?

Anyone able to fix the hardware button issue or do the registry edits correct it?
This HTC homescreen just looks sick on the 750! I want to try it.
Anyone able to uninstall it?

HR will do it - got a question for the experts though - does this app interfere with com ports at all - I found that after installing this plugin my BT GPS couldnt connect to my 750v - or maybe its coincidence?

How can I remove "phone status" plugin (displaying network name, BT,CF status...) from screen? After installing HTC plugin I have HTC,status plugin and dial lookup, and cannot remove the second one.
Thanks

Can this go on just the newist treo out? not the palm but the one supporting WM6?

I like the HTC home plugin but I cannot use hidelogo at the same time...so one line at the top is burned by the ATT carrier logo. If you click on hidelogo you go into a loop of resets.

This thing is great. But I have a problem. For some reason the screen will not go blank when the "End call" button is pressed (Tried other buttons as well but nothing will turn it off). In fact the screen will not go black for about 10-15 sec. Anyone know why this would happen? Thanks

The quick dial does not let me choose which number to dial on a contact. ie. cell, home, work. Anyway to fix that?

What's On Your Today Screen?

I have been going back and forth between rltoday and HTC Home. I have issues with both and I like them both. I am currently running the HTC Home plugin.
rltoday Pros:
Highly configurable (if you have time)
very light weight
can use with the hidelogo cab
free
rltoday Cons:
limited user community (for my device)
unable to navigate with five-way
limited native functionality (additional scripts or 3rd party apps needed)
no weather plugin
HTC Home Pros:
Customizable (HTC Home Config)
multi-tabbed
built-in weather
built-in ringer profile selections (with HHC)
launch music player from today screen as well as see what's playing
built-in picture dialer
no 3rd party apps/scripts needed
free
HTC Home Cons:
unable to use hidelogo cab
weather plugin is limited (even with HHC)
profile selections don't always work
a. doesn't vibrate but is silent
b. when the meeting/event is over speaker is turned all the way down
when the clock is touched it launches the time/alarm settings (annoying)
So, what are you running on your today screen and why?

hey too bad nobody is answering to this i would love to know all the cool today plugins there is. Im running the HTC Home plugin and sometimes the cool Pointu interface.
How about you guys ?

I prefer the simple but elegant approach...until something really groundbreaking comes along :
TA Pro: controls LED, and gives quick stats and weather
GoodMobile Messaging Calendar and Mail (also displays sms count)
cLaunch: Three 2xtabs (each tab has 2 wrap rows) with my common apps. I've also modified cLaunch.dll to play nicer with the 240x240 display when in the settings area of the app.
Hidelogo to give a little more real estate
I've also replaced battery.exe with an HTC version that gives a better battery icon and little more display flexibility.
QuickMenu 2.7 to assist with app closing, hibernate, soft reset and additional menu browsing needs.
fTouchflo (last free version) for easier touch navigation
I've replaced the default tahoma.ttf with the one from my XP workstation for a smoother font appearance
================
I really like throttle launcher as a replacement for cLaunch, but presently it takes up too much memory and is a little cumbersome to configure on the fly.
PointUI is promising, but needs better hooks into "Good" before I can use it, plus needs more customization options to allow me to get to what I need in a minimum of "clicks" - it's not presently able to give me what my present setup offers me.
================
screen captures with PocketScreen" http://forum.xda-developers.com/showthread.php?t=328627

tmknight said:
I prefer the simple but elegant approach...until something really groundbreaking comes along :
TA Pro: controls LED, and gives quick stats and weather
GoodMobile Messaging Calendar and Mail (also displays sms count)
cLaunch: Three 2xtabs (each tab has 2 wrap rows) with my common apps. I've also modified cLaunch.dll to play nicer with the 240x240 display when in the settings area of the app.
Hidelogo to give a little more real estate
I've also replaced battery.exe with an HTC version that gives a better battery icon and little more display flexibility.
QuickMenu 2.7 to assist with app closing, hibernate, soft reset and additional menu browsing needs.
fTouchflo (last free version) for easier touch navigation
I've replaced the default tahoma.ttf with the one from my XP workstation for a smoother font appearance
================
I really like throttle launcher as a replacement for cLaunch, but presently it takes up too much memory and is a little cumbersome to configure on the fly.
PointUI is promising, but needs better hooks into "Good" before I can use it, plus needs more customization options to allow me to get to what I need in a minimum of "clicks" - it's not presently able to give me what my present setup offers me.
Click to expand...
Click to collapse
Any screenshots?

My Today screen is settled. I have finalized on HTC Home Plugin. No other plugins on the screen. You will notice that I have the bluetooth and the carrier information hid. This is accomplished with Memaid removing the "active call", and "lookup". This does make some additional challenges like the usage of the talk (green) and end (red buttons) as well as the ringer. These are easily overcome by registry changes. I also employed the HTC Home Customizer to make the background transparent and have the "Vista" icons. Music is being played on the device and only showing in the plug (not title bar) through the use of "wk Task". Also I have the battery icon on the today screen but on other apps the time is displayed. This is a result of HHC as well. You can have the time only always; I chose to have it only away from the Today screen. You will also notice that the left and right softkeys are different. Because I am using the standard Windows Mobile dialer, I can customize these keys. One goes to the mail/messaging and the other goes to my IM program. I am running WM6.1 Lite OS (ROM).
I intend to write a complete document on how to do these customizations. It can be frustrating looking for hours and days piecing things together. WinMob has been a lot more fun for me than Palm (former 650 user).
What other options are out there? Feel free to chime in.

Just added quick menu to the list. It is amazing!

Quickmenu
I have found that this application makes my Treo unresponsive. I noticed that after selecting the application, my phone seems to hang or be very slow. I have uninstalled it until I can figure what is making it unresponsive.

Quickmenu Issue
I have not encountered any performance issues (did you soft reset after install). Here are the settings I have employed:
Code:
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Display]
"BatteryMode"=dword:00000003
"BkgndCacheMode"=dword:00000001
"BkgroundImage"=""
"BkgroundMode"=dword:00000001
"SelectionAlpha"=dword:00000099
"ShowAppIcon"=dword:00000000
"ShowTaskClose"=dword:00000001
"TextColorOnImage"=dword:00e0ffe0
"WindowLeft"=dword:00000060
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Exclude]
"Count"=dword:00000006
"Item1"=">\\Windows\\wmplayer.exe"
"Item2"=">\\Program Files\\Navigator\\TomTom Navigator.exe"
"Item3"=">\\ExtendedROM\\Program Files\\Total Commander\\cecmd.exe"
"Item4"=">\\ExtendedROM\\Program Files\\RSA SecurID\\RSA_SecurID.exe"
"Item5"=">\\ExtendedROM\\Program Files\\googlemaps\\googlemaps.exe"
"Item6"=">\\ExtendedROM\\Program Files\\EsmertecJBed\\jbed.exe"
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\General]
"AutoEndSyncTask"=dword:00000001
"AutoStart"=dword:00000001
"CacheImageIndex"=dword:00000001
"EnableXButton"=dword:00000000
"LongPressAppIconFunc"=dword:000003f9
"OkKeyEndTask"=dword:00000001
"RegisterHomeKey"=dword:00000001
"ReplaceStartMenu"=dword:00000001
"RightArrowEndTask"=dword:00000001
"TEditWhenEditing"=dword:00000001
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\MenuItems]
"CustomProgramFolder"=""
"CustomProgramMenu"=dword:00000000
"SubItems"=hex:\
1a,04,00,01,24,04,00,01,2e,04,00,01
"TopItems"=hex:\
00,04,01,00,fd,03,01,01,00,00,00,00,d0,07,01,01,00,00,00,00,02,04,01,00,fc,\
03,00,00,00,00,00,00,06,04,01,01,01,04,01,01,f2,03,01,00,00,00,00,00

Well my today screen is running SPB Mobile Shell 2.
Version 2 looks real nice and has some cool animations too.
lew, i sent you a pm, id love to get rid of palm dialer and the att/bt logos while keeping red/green button functionality.
I got what I need installed (memmaid, total commander) i just dont know what to do.

what registry settings did you use to get the green and red phone keys functional again after disabling the carrier/bluetooth icons?

Green/Red Button Functionality
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000

Quick Menu
tmknight said:
I have not encountered any performance issues (did you soft reset after install). Here are the settings I have employed:
Code:
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Display]
"BatteryMode"=dword:00000003
"BkgndCacheMode"=dword:00000001
"BkgroundImage"=""
"BkgroundMode"=dword:00000001
"SelectionAlpha"=dword:00000099
"ShowAppIcon"=dword:00000000
"ShowTaskClose"=dword:00000001
"TextColorOnImage"=dword:00e0ffe0
"WindowLeft"=dword:00000060
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\Exclude]
"Count"=dword:00000006
"Item1"=">\\Windows\\wmplayer.exe"
"Item2"=">\\Program Files\\Navigator\\TomTom Navigator.exe"
"Item3"=">\\ExtendedROM\\Program Files\\Total Commander\\cecmd.exe"
"Item4"=">\\ExtendedROM\\Program Files\\RSA SecurID\\RSA_SecurID.exe"
"Item5"=">\\ExtendedROM\\Program Files\\googlemaps\\googlemaps.exe"
"Item6"=">\\ExtendedROM\\Program Files\\EsmertecJBed\\jbed.exe"
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\General]
"AutoEndSyncTask"=dword:00000001
"AutoStart"=dword:00000001
"CacheImageIndex"=dword:00000001
"EnableXButton"=dword:00000000
"LongPressAppIconFunc"=dword:000003f9
"OkKeyEndTask"=dword:00000001
"RegisterHomeKey"=dword:00000001
"ReplaceStartMenu"=dword:00000001
"RightArrowEndTask"=dword:00000001
"TEditWhenEditing"=dword:00000001
[HKEY_CURRENT_USER\Software\AlenSoft\QuickMenu\MenuItems]
"CustomProgramFolder"=""
"CustomProgramMenu"=dword:00000000
"SubItems"=hex:\
1a,04,00,01,24,04,00,01,2e,04,00,01
"TopItems"=hex:\
00,04,01,00,fd,03,01,01,00,00,00,00,d0,07,01,01,00,00,00,00,02,04,01,00,fc,\
03,00,00,00,00,00,00,06,04,01,01,01,04,01,01,f2,03,01,00,00,00,00,00
Click to expand...
Click to collapse
Did you install this or did you unzip and launch it? I didn't find an installer (or cab). I will launch it again and reset the device and see if it works.

mobilelew said:
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000
Click to expand...
Click to collapse
Thanks for the tutorial, but now the red key no longer turns off the screen. Any ideas

Red Button No Longer Turns Off Screen
I too have the same problem with the red button. To aleviate this I have created a button shortcut that allows me to lock the phone by pressing one button. Using QuickMenu, in the options, on the command tab, choose lock from the list and click on create shortcut. You can now assign a button to this to lock the phone. I choose the OK button. So if I press and hold OK, my phone will lock.
By the way, the issue that I was having with QuickMenu was a conflict with CTRL-Pro. After removing it I am now able to use QuickMenu without any problems.

mobilelew said:
Use the following steps to remove the carrier info/bluetooth logo and still use the green/red buttons.
I got rid of the carrier info by way of the removal of "Active Call" and "Dial Lookup" startup items. These were removed using MemMaid. At this point the device will revert to the WinMob dialer. Pressing the green button will launch the dialer and pressing the red button will cause it to go away. However pressing the red button will NOT end a call. You have to press the "End" button on the screen or hangup via your BT device button.
You will need to change the service called "VOL0" to "manual" (MemMaid again).
You will no longer be able to select your ringer in the standard way. You will need to make the change in the registry. HKCU\ControlPanel\Sounds is where the change is made. The entries PlmORingTone1, 2 and 3 are the entries for Known Unknown and Roaming calls. You will have to copy and paste (and over-write) the entries from there to "RingTone0", 2 and "RoamingRing0". PlmORingTone1 and RingTone0 are for "Known"callers. You will have to make this change every time you want the ringtone to be different. These steps are not necessary for changing the ringtone of a contact.
You need to remap the device keys. (Backup your device OR copy the values down BEFORE you make any changes if you want to go back!!) Make the following changes in the registry. In HKLM\Security\Phone change the Charmap to "ertdfgxcvzubo" and the Keymap to "ERTDFGXCVZUBO". In HKLM\Security\Phone\Skin change Enabled to "0".
Reset the device
NOTE: These changes are only necessary if you want to use the standard WM6(.1) dialer. Original Values for the Charmap and Keymap entries
Charmap "ertdfgcvbyuio"
Keymap: "ERTDFGCVBYUIO"
Thanks to jcbarren at TreoCentral http://discussion.treocentral.com/showthread.php?t=148000
Click to expand...
Click to collapse
why not use the "hidelogo.cab" floating around and be done with it? Never had an issue with any soft or hard buttons.

mobilelew said:
Did you install this or did you unzip and launch it? I didn't find an installer (or cab). I will launch it again and reset the device and see if it works.
Click to expand...
Click to collapse
I use the executable and DLL's from http://www.alensw.com/attachment/QuickMenu_2.7.rar
I extract to ExtROM and create a shortcut to the EXE in windows\startup.
All the settings are stored in the registry, use total commander or your preferred flavor of reg reader to import/export for backup/restore purposes.
Cheers

why not use the "hidelogo.cab"
The hidelogo.cab causes a reset loop with the HTC Home plugin.

You Like ? ALL BLACK ! Verie Nais
Here is my home screen. Running WM6.1 Regular Version.

paypalbid said:
Here is my home screen. Running WM6.1 Regular Version.
Click to expand...
Click to collapse
What are you using to put the icons on the screen?

mobilelew said:
The hidelogo.cab causes a reset loop with the HTC Home plugin.
Click to expand...
Click to collapse
Yes, yes it does - good luck!

Editing the home screen

Is it possible to change camera&phone from the bottom of the home screen to eg. wifi&phone?

emili000 said:
Is it possible to change camera&phone from the bottom of the home screen to eg. wifi&phone?
Click to expand...
Click to collapse
yes it is possible

Yes! I've used Advanced Configuration Tool v3.3.cab.
In advanced configuration you can select different applications to set in the bottom of the home screen.

Could you tell me where will I find it (which option should I choose)

Search here in XDA for "advanced configuration tool V3.3.cab" (thanks shape!) and install it!
Then U go in "User Interfaces"->menu->more setting->key mapping and here you can sett every programs you want assign to the sofkeys!

in order to not make another thread; where will I find "phone"? I've changed it by mistake, and now I can't switch it back.

If you use AdvancedConfig then, you can change the softkey by looking up the "phone" shortcut from the drop down list or you can just leave it blank & it will change it automatically to the default setting.

Maybe a little OT... But I read that .NET 3.5 needs to be installed. Can I simply download and install it or do i need to manually do register changes afterwards (read that I had to somewhere)?

Just install NetCF3.5 to your phone (Main Memory or Storage Card) does not matter, mine is running just fine from SD Card. Soft reset & it should run with no issues.

Continuing the OT:
The Netcf 3.5 is not replace automatically but we must change the values on the register.
HKey_Local_Machine -> Software -> Microsoft ->. NETCompactFramework
click on item 2.0.7045.00 and change the value from 1 to 0
click on item 3.5.7283.00 and change the value from 0 to 1
Close ... soft reset and you have the ROM with the NETCF 3.5!

ok, now I know. However it worked for me without having to change registry settings.

or use this progam, works on diamond 2 too..

Does anyone know how you might, in a similar vain, get Notes to appear on the home screen?

@marcelvanblankers:
doesnt work on my td2! after restart it seems like it does, as there actually are the replaced buttons being displayed, but when tf3d launches there are "phone" and "camera" back again.

That's BS.
I just installed NetCF 3.5 via .cab and Advanced Config worked, without any registry changes.

i was talking of the softkeymanager1_1_diamond_beta.ARM_WM5.cab

woelv said:
@marcelvanblankers:
doesnt work on my td2! after restart it seems like it does, as there actually are the replaced buttons being displayed, but when tf3d launches there are "phone" and "camera" back again.
Click to expand...
Click to collapse
you must check the checkbox in the program to change the keys when using TF3D....
one is for standard today, the other for TF3D..
greetz

that's exactly what i did. i just tried it again - same thing, no change.

I'm looking for a solution to replace the calendar by the tasks and notes in the home screen.
Does anyone knows how to do it?
Tks

woelv said:
that's exactly what i did. i just tried it again - same thing, no change.
Click to expand...
Click to collapse
change the keys in program, save settings then exit.
in TF3D switch a tab and switch back to homescreen.
now it will be changed, it works on my diamond2. in TF3d and in original today.
do you have .net 3.5 installed? i know i have.. don't know if it matters..
greetzz

Change the left soft key from Phone to Lock Screen

Is it possible to change the left soft key from Phone to Lock Screen?
There exists a hard Phone key already.
Thanks.

camper said:
Is it possible to change the left soft key from Phone to Lock Screen?
There exists a hard Phone key already.
Thanks.
Click to expand...
Click to collapse
bsb tweaks + s2u2

R3dD3vil said:
bsb tweaks + s2u2
Click to expand...
Click to collapse
I've these 2 apps already, how to do it?

To change the left softkey to lock with S2U2, do this:
Install a registry editor. You can get a free one here: http://freewareppc.com/utilities/phmregistryeditor.shtml
Open HKEY_LOCAL_MACHINE/Software/HTC/manila/
Change the value for HomeLSKPath, to this: \Program Files\S2U2\s2u2.exe
Change the value for HomeLSKText to this: Lock (or anything you want for the name of the button)

But....is it possible, to make a link to the build-in Lockscreen?
Greeting
Toni

I don't know if it's possible...I don't think the built in lockscreen has an exe file to link to.

Do you know how to set the left soft key to the Tasks? I've tried using a regedit and changing the Path to \Windows\Tasks.exe but get an error when I try and use it. Also tried setting it via BsB Tweaks, afterwich, the name Tasks is on the front screen but when I push it nothing happens.
I really thought changing the regkey (as stated above) to \Windows\tasks.exe would work.
Any help on changing the left softkey to Tasks please?

the_scotsman said:
To change the left softkey to lock with S2U2, do this:
Install a registry editor. You can get a free one here: http://freewareppc.com/utilities/phmregistryeditor.shtml
Open HKEY_LOCAL_MACHINE/Software/HTC/manila/
Change the value for HomeLSKPath, to this: \Program Files\S2U2\s2u2.exe
Change the value for HomeLSKText to this: Lock (or anything you want for the name of the button)
Click to expand...
Click to collapse
thanks for your information.
Actually I have already configured like this.
However, the performance of loading lock screen is poor.
In fact, I'm using the latest version of S2U2, which is version 2.30.
It supports a new feature to replace the default wm lock screen.
That is, if press "start" and then press "Lock" button at left softkey, S2U2 lock screen would be called.
I've tried to compare the performance of following 3 approaches:
1. turn on the new S2U2 feature to replace original wm lock screen
2. putting S2U2 icon to the quicklink at Manila home
3. modify left softkey of Manila home by S2U2 using above method
The result shown that 1 is the fastest but 3 is the slowest, even much slower than 2.
So, if it is possible to "copy" the Lock button from Start screen to Manila home screen, then it is perfect.