Related
Hi
i have HTC S710 Smartphone and when i call someone i cannot hear ringing and i cannot hear person voice from Ear Piece. once i put on speaker phone i can hear it.
Is there anyone know how to fix it
Please Help...............thanks
andy
You internal speaker isn't functioning perhaps. Take it apart, clean the connections and see if it works. I have 2 speakers that you can have for a small fee+shipping if you are interested. I no longer use my Vox so I have all the parts and a few spare parts.
It's easy to take apart, follow the service manual which should be linked in the Wiki.
thanks
i have sent for repair service depot
andy
How much is the speaker because is have problem with it
Thx
If anyone knowledable on anything that pertains to my problem could help me out I would be very grateful..here's the scoop..
I have had my polaris for over a year now (out of warranty) and for the longest time I've had issues with the touch screen not responding correctly and having to re-calibrate it all the time. I finally figured out what the issue was yesterday after I hard reset the device and the screen was still messed up...I had been using a dock for this device that isn't manufactured very well -- using the dock day in day out for a few months at work actually bent the pins on the USB connector on the cruise to the point where some of them were touching each other (yikes!)
So, I gave the phone to my dad who's an engineer, he took it to work and used a microscope or whatever and some tools and got the pins back straight again..now the screen works fine! Needless to say that dock is in the garbage now. The brand was "BoxWave" -- stay away from their products, they are JUNK!
Anyways -- I still have a problem with the scroll wheel.
Spinning the wheel does not work at all -- the Up, Down, and Left buttons work when pressed, and the wheel does light up, but spinning it doesn't do anything. Also the Right button doesn't work either. The button in the middle works okay. All of the working buttons cause the light to go on.
The logical conclusion here to me anyways seems to be that the bent pins caused permanent damage to the scroll wheel...I'm very glad it didn't cause perm. damage to the screen (or anything else, so I hope!!)..but anyways -- what would be the best option for me at this point?
Call HTC and have them fix it and pay out of pocket?
About how much would they charge for something like this (ballpark)?
My dad is a very skilled electrical engineer -- he would be willing to take it apart and fix it for me at work..he's got all the tools and stuff for it and doesn't mind at all...what parts should I look into ordering?
Thanks for any help anyone can provide here.
Hi,
I have a similar problem the up, left, right and turning the wheel does not work on my polaris either and I have not damaged it whatsoever. So, i do not think your button problem is because of a possible short circuit. But, sorry to tell you but I do not have a solution to the problem.
I thought I was certain, but occaisonally my screen still dies.
Perhaps it was permanently damaged? It is much better than before though -- but no matter what I do -- the wheel spinning does nothing, and the Right key does nothing at all.
Do you have any clue what part we would need to get replaced?
I am looking to replace the screen as well due to scratches.
I believe it's called a "digitizer" (the screen part not the wheel)
No, sorry. But if you do find out let me know as well.
Thank you.
found this on ebay
Hi,
Guys I found this on eBay. It says it can repair this kind of issue. Although I do not have the time to test.
So, here it is
http://cgi.ebay.com/HTC-Touch-Cruis...ries?hash=item19b5e3f64f&_trksid=p3286.c0.m14
P.S. if anyone does test this please give us your feedback. Thank you
What?
Did you post the wrong link or something?
That is a SIM card.
This thread is about the scroll wheel \ DPad.
EDIT:
Nvm, I see in the auction it says its a ribbon or something.
I dunno about this one...but it's cheap.
I still have not even gotten around to repairing my screen \ usb port though...god damn money.
If i order this ill let u know.
OK so I just purchased a new charge port and digitizer, but I have yet to see ANYONE selling a replacement scroll wheel.
Alot of people are selling the "housing" but it's missing the wheel!
Anyone know where to get a replacement metal panel and wheel only, not the entire housing?
I found a jog wheel for the shadow -- wonder if it would fit?
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
alanazar said:
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
Click to expand...
Click to collapse
Housing including the jog wheel and electronics?
I also ordered a usb connector and apparently they sent me one that isn't compatible with the cruise...I think I am just gonna buy a broken one and get the parts from it..they seem to be rare compared to other HTC models!
surgex0 said:
Housing including the jog wheel and electronics?
I also ordered a usb connector and apparently they sent me one that isn't compatible with the cruise...I think I am just gonna buy a broken one and get the parts from it..they seem to be rare compared to other HTC models!
Click to expand...
Click to collapse
wow good luck!
Check out this link:
http://cgi.ebay.com/FULL-HOUSING-FO...wItemQQptZPDA_Accessories?hash=item2551ec66c6
and i also found this for you (is that what came wrong), but you have to make sure it's the 2007 Touch Cruise and see if yours is the POLA100 or POLA200:
http://cgi.ebay.com/ORIGINAL-HTC-TO...wItemQQptZPDA_Accessories?hash=item5883c9282c
http://cgi.ebay.com/HTC-Touch-Cruis...temQQptZPDA_s_Pocket_PC_s?hash=item1c0d5c098c
Hope that helps!
alanazar said:
I have the same issue, the jog wheel doesn't work and neither the right button, but everything else works & lights up the keypad part....strange that this is 3 of us with the EXACT problem, maybe there's something we need to figure out? btw, i used to hardly use the buttons, but i used the jogwheel a lot to scroll.
I also have the BoxWave dock, however, i've found mine to be of great quality & use...reading your post made me paranoid so I checked my usb connecter over & over but thankfully everything looks very normal.
I came across this post, because I was actually looking for some user advice on replacing your own housing & wheel. I already found the entire housing & keypad on ebay that comes with the screwdriver set, and i have the manual to assemble & dissassemble.
I would rather do it myself so i wouldn't have to do without my phone while waiting for this to get repaired, but i also don't want to do it if it's very tricky with a big chance of busting phone, so i'm looking for a feel of easy-medium-hard. I've already done something similar 3 years ago to my I-Mate Jamin as well as replacing the speaker, so my technical skills are probably around mid-level.
Anyways best of luck, i'll update this post later to tell you how it went (this could be in 2 weeks time from now).
Click to expand...
Click to collapse
I had the same problem but on a 2 year warranty Touch Cruise. Phone was fixed and re-installed with WM 6.1
Know I face Bluetooth connection problems again and the BT hotfix is not accepted anymore.
I do have to say that the upgrade after re-installing should have been left behind.
I have the same problem... Scrol wheel not working en button to the right
anyone ever fixed this?
Hey Guys!
I've got the same problem with the wheel and the right button. So I was wondering if anyone fixed the problem?
I have no warranty anymore
I think I know what's your problem, mates.. It seems that it is essential for almost any P3650 - the cable, which is going from the jog wheel to the keyboard control unit tears apart just before (or exactly at) the copper pads on the molex thingie, that plugs into K/B unit (damage is so slight, that it barely can be seen).
I had no luck looking for the jog wheel sold seperately from housing, or at least with that plastic-chromed buttons cover. If anyone finds out that it is possible to obtain it seperately - I would greatly appreciate
Btw, same problem goes for sim holder's cable - I have replaced mine 2 times already (you can get 'em for around 15$ from ebay).
Sorry for my english - it's a bit rusty atm
Same problem here..wheel doesn't function can't find the part by itself ..
Touch Cruise jog wheel & keyboard
Exact same here - jog wheel scrolling broken & right selection does not work. Besides, my "call" key stucks time to time.
So for now I've just got both of them - jog wheel and keyboard (not the entire housing) from ebay, 15 & 7 $ respective
wheel ordered from the following ebay location :
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rt=nc&nma=true&item=260656153778&si=1E2jM09T8qOM9DzM6uzrXo5Qiqg%253D&viewitem=&sspagename=STRK%3AMEWNX%3AIT
same provider has keyboard also, for some reason it is not on eBay active items. But you can contact the seller and ask for it.
I gonna replace both in a near future, and will update about the result.
Hi All,
my wife is not comfortable with mobile phones having only soft keypad. is there any hard keypad like alternate available so that it can be put on the phone / screen whenever required and later removed. i remember little back sony p800 series phones were having such solution available with them.
is there anyone manufacturing / marketing such products?
pls. help me with the details.
thanks
Dears folks,
I'm in search of a list of the references of the electronic components/parts of the Samsung Galaxy S GT-i9000.
In particular the reference of the main speaker (see pics attached) part since I've broken this part while replacing my broken LCD screen/digitizer.
I failed to find any OEM/electronic parts suppliers selling this.
Any idea ?
Thanks beforehand.
The SEC part number for QSP01 speaker module is GH59-09408A.
It will cost you around 25-30€ I recon.
Would anyone happen to know where to get a gps antenna? Its the sticker-type just beside the speaker.
I can make a small donation for whomever finds a such antenna.
Sent from my GT-I9000 using XDA App
rkantos said:
Would anyone happen to know where to get a gps antenna? Its the sticker-type just beside the speaker.
I can make a small donation for whomever finds a such antenna.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The antenna assy is not sold separately.
You need to buy the whole middle frame.
Price is about 25 euros.
Richthofen said:
The antenna assy is not sold separately.
You need to buy the whole middle frame.
Price is about 25 euros.
Click to expand...
Click to collapse
Well, where can I get the middle frame?
@ Richthofen
Thank you. Huh same question as "rkantos", any idea where to buy GH59-09408A online ? Failed to find it on eBay.
you might try these folks http://www.globaldirectparts.com/
they're in Texas, USA
Thanks Larryccf. Unfortunatly, not in their catalogue.
I'll have a look straight to korean "suppliers" ...
Okay, I did some further investigation and found out that this "rear speaker" is manufactured by a Korean company named Bluecom.
The reference of this "speaker module" is HQS151135P ... which is to be found inside the plastic ****.
Hope this help for future "unlucky" like me when disassemblying the SGS.
Hi everybody,
I'm looking for a website where I can buy a special spare parts for my galaxy s!
This part is the mic, the physical button and the two touch buttons.
All this components stay in the same part
If you know what's the reference number of this part or where I can buy it, you may give me this.
thanks boys.
Jika
jawad_449 said:
Hi everybody,
I'm looking for a website where I can buy a special spare parts for my galaxy s!
This part the mic, the physical button and the two touch buttons.
All this components stay in the same part
If you know what's the reference number of this part, you may give me this.
thanks boys.
Jika
Click to expand...
Click to collapse
For the 2 touch buttons ... lookout on eBay with the following keywords (I cannot give the direct link since I'm limited in my profile account here) :
"Flex Cable Keypad for Samsung Galaxy S i9000 wTracking"
... quite not sure it includes the mic and the "plastic" button at the bottom of the phone, tough.
Thanks itdoe. I'm just looking at this and there's the mic, that's exactely what I'm looking for! That's maybe the solution for my physical button which lost his sensitivity and the two touch button which doesn't work ...
But I have one more question :
Do you know where I can find the wire connecting this part and the mothercard? (like in the pics).
That's a standard cable or that's a spacial Samsung cable?
Someone know what's it utility?
I ask you that because I disconnect this cable and everything works in my phone only the two touch key.
After some investigations, I found what's this wire. That's the network cable which work like your hearset for the radio in your Galaxy S. That's in fact an antenna! (maybe for bluetooth too, but I'm not sure for that!)
If that can help someone
Anyone have info on the part number for the front facing camera?
TheBrandonWRX said:
Anyone have info on the part number for the front facing camera?
Click to expand...
Click to collapse
The front facing camera is in the same module with the main camera.
The part number for this assy is GH59-09400A.
The price is around 40-50 euros I recon.
Hello,
i need the spare part: microphon/antenna
Do you know also the part number and where i can find it?
Thanks for help.
gb16928
gb16928 said:
Hello,
i need the spare part: microphon/antenna
Do you know also the part number and where i can find it?
Thanks for help.
gb16928
Click to expand...
Click to collapse
The microphon and antenna stay on button flex cable ...
You can find it on Ebay (search : "GENUINE SAMSUNG KEYPAD FLEX RIBBON CABLE FOR I9000" )
I think I've the one million dollar question ...
I wondered if someone know where I can find the power flex cable welded on the mothercard to remplace my cutted flex cable ... (or eventually this reference).
If you havn't any information about this one, do you think it's possible to use an other flex cable model?
thank you for your answers...
To bad there is no answer to the real flex cable or the middle part. By my own stupidness i destroid the flex cable. I think I must buy a new SGS then all my holiday pictures and videos are in the broken phone. So the new Samsung Pad must wait...
Thanks, my i9000 is ok now
I dropped my i-mate sp5m a couple of time on the floor. Now most of the keys are not working including the joystick. I did opened the phone and found the keypad flex is broken near the push connector. I would like to replace the keypad flex with a new one to make the phone usable again.
Kindly someone help me to find the keypad flex of this i-mate sp5m in India.
thanking you in anticipation.
-th
Did the keyboard flex really break because of the drop? Usually this happens if you open the device and don't take care about this connection. If this broke because of the drop, then your housing would be so damaged that replacing the keypad will not be the only thing to do...
Finding a replacement keypad may actually be harder than finding a new (used) device. Try your luck at ebay if this is useful in India. Mind that you can transplant the board in any Tornado or even Hurricane housing with a working keyboard. So if you find one of these which is damaged otherwise (e.g broken screen) you can recycle the parts you need.
You are quite right, it is not just dropping, it is mix up with careless opening. I did took the handset to an unauthorized service center on first few problems and I think that makes problem worsen.
Now my only solution is soldering those very tiny connections or changing the whole keypad flex.. and later is better. But where could I find one is the problem.
I think you cannot solder them as the flex-cable has copper-print on both sides. Just count the contacts and the print lines.