Hello all. I've tried many ICQ clients,but all of them are not signalizing incoming message with sound,only vibration is working. My favorites are gsICQ and QIP. I think,that has something to do with power management,because on power-on is it working correctly and in my lovely Himalaya is it also working on standby. Someone has some idea,how to resolve this? Thanks.
TomasNM said:
Hello all. I've tried many ICQ clients,but all of them are not signalizing incoming message with sound,only vibration is working. My favorites are gsICQ and QIP. I think,that has something to do with power management,because on power-on is it working correctly and in my lovely Himalaya is it also working on standby. Someone has some idea,how to resolve this? Thanks.
Click to expand...
Click to collapse
Agile works. Also in sleepmode. But you have to pay.
http://www.agilemobile.com/
Huib
I will not pay for the sound. I hate Agile due that. ICQ is free and will be free. I am not so rich to sponsor few maniacs in agile. Agile cost same value as sms,so...never.
Related
Hi All,
Has anyone experienced this:
Talking on the phone using a bluetooth hands free (Moto H500) and any kind of notification comes in (new txt msg, new voicemail, low battery, etc) the call switches from the headset to the handset. I only had this happen in the WM6 ROMS, but it has been in all the ROMS i have tried. Maybe there's a fix i missed somewhere, maybe it only happens to me... Any thoughs or suggestions would be greatly appreciated.
thanks
Ya, I have the same issue with the WM6 ROMS.
I think I solved it though. You have to set Voice Command to only announce notifications though the device speaker. That seems to have solved the (annoying) issue for me.
Thanks for the info GadgetGuy, I'll give that a try... I just prefer that the people around me not know I just got a new message or my battery is low... If I find anymore on that I'll post again.
Hi there, I am using VJgrace latest 3.4 ROM, I realized that nowadays, sometimes I would not be able to receive incoming calls, my friends and relatives have complained that I do not pick up their calls, they even showed me the proof of their call logs. They said there were dialing tone. So one day, I tried for myself and true enough, at times, the phone will just light up from idle, but it will not say that there is an incoming calls. When this happen, I cannot make outgoing calls as well, when I try to dial someone, it just hang there.
Any solution? Is this a radio or ROM problem?
I have run the GSM update
I faced the same problem too. I thought my friends were joking. just called myself to confirm. true enough the phone lights up for a second or two then it goes back to sleep.
this is serious. am thinking of going back to WM 5
Really? Wow. That's a new one. I guess I haven't seen this. illi - would you really go *all* the way back to WM5? Are you saying this is a problem in every WM6 ROM you have installed? I'm surprised... I've never seen it on my phone. But I don't get too many calls during the day. And I reboot my phone every 2 or 3 days just for good measure.
bipinsen said:
Really? Wow. That's a new one. I guess I haven't seen this. illi - would you really go *all* the way back to WM5? Are you saying this is a problem in every WM6 ROM you have installed? I'm surprised... I've never seen it on my phone. But I don't get too many calls during the day. And I reboot my phone every 2 or 3 days just for good measure.
Click to expand...
Click to collapse
i cant afford to loose calls. some friends had complained since a few months back. so i suspect its all WM6 ROMs not just vj's.
i think it happened when the device is syncing because i receive lots of emails. so at that time the gprs/edge is being use. THIS IS MY WILD GUESS ONLY!! I noticed it (the device awakes then back to sleep) once while on active sync and at that moment emails were being downloaded from my email server.
How can yew trouble shoot this problem?
illi said:
i cant afford to loose calls. some friends had complained since a few months back. so i suspect its all WM6 ROMs not just vj's.
i think it happened when the device is syncing because i receive lots of emails. so at that time the gprs/edge is being use. THIS IS MY WILD GUESS ONLY!! I noticed it (the device awakes then back to sleep) once while on active sync and at that moment emails were being downloaded from my email server.
How can yew trouble shoot this problem?
Click to expand...
Click to collapse
Do you have this checkbox selected? I'm not sure if it makes a difference, but it's one thing I saw.
bipinsen said:
Do you have this checkbox selected? I'm not sure if it makes a difference, but it's one thing I saw.
Click to expand...
Click to collapse
not too sure but will check next time i active sync. anyway i rarely sync with my pc so i doubt thats the problem - i noticed once while hooked to pc the phone awakens and then sleep. i use mail2web.com's microsoft exchange to sync my emails. i active sync only to do spring cleaning on my device and SD.
if karhoe subscribe to the same telco as me than i suspect its the operator. (hello karhoe you there;-))
I have this problem even when the phone is not connected to Active Sync, when i'm outside. The phone just light up, and then poof, gone. Well, I am using DiGi telco. But I don't have this problem when using Andot's PEE, don't have it when using 3.0 ROM, only recently when I started using 3.1, had this problem, after so long, then use 3.4, still have it
I had this issue with WM5.. now with WM6 I didn't found (yet) this issue. (using EA ROM)
This is a quote of one of my posts (Oct 7 2006, 18:43, modaco):
i think this is a software issue..
i have a spv c600 and have problem with the telephony part (and many other spv c600 users)
1. some times when somebody is calling me the phone does not announce in any way that i have a call.
2. other times when somebody is calling me the phone send automatically a busy tone to the caller and again does not announce me that somebody has called me.
3. and other times when somebody is calling me, the caller is announced by the robot that 'the user is in an uncovered area or has the phone turned off' or it divert it to voice mail (if the WM user has voice mail active. i have it off)
however, point 1 and 2 can be 'detected' by eye on call (phonesharpen). only detected (no answer, no nothing).
- in the first case, a window with caller information is displayed as long as the caller is calling you.
- in the second case, a window appears and disparears extremly fast
to bad that the phonesharpen does not log the detected calls . i have mailed them about this, but on answer..
i gues the problem is the native telephone application
so .. in conclusion WM smartphones are not recommended for people who want to use them as a phone.. who knows what important calls you miss.. i hope this will be fixed someday
Click to expand...
Click to collapse
@karhoe you should tell this to NiTroGeN and to VJgrace
Gentlemen, I suspect this issue is somehow connected to currently selected homescreen. I had this issue on WM6 build 18120 homescreen with VOIP plugin, but when I chose another one not containing VOIP info, this issue has gone
ega2oo2 said:
Gentlemen, I suspect this issue is somehow connected to currently selected homescreen. I had this issue on WM6 build 18120 homescreen with VOIP plugin, but when I chose another one not containing VOIP info, this issue has gone
Click to expand...
Click to collapse
I tend to believe that it is caused by either of these problems:
1 - the telco (I'm subscribing to the same telco as karhoe)
2 - the voip plugin on the Homescreen
This is what I'll do: I shall deactivate the voip plugin. But I cant afford to unsubscribe from my current telco; it offers the cheapest unlimited data plan. LOL!!
I have a feeling that it is related to VOIP, I did configure my VoIP using the xml method, and then I also installed the VoIP fix button for communication manager. Now im using HTC Home screen and so far, so good
I had the Original Obit until I upgraded to the Orbit 2 a few weeks ago.
I love the phone apart from I have noticed the send/receive schedule on my emails will only run when the screen is active and rarely when device lock is enabled.
Has anyone else had this problem and is there a solution?
Thanks
I get my emails constandly due to Direct Push
KennyDies said:
I had the Original Obit until I upgraded to the Orbit 2 a few weeks ago.
I love the phone apart from I have noticed the send/receive schedule on my emails will only run when the screen is active and rarely when device lock is enabled.
Has anyone else had this problem and is there a solution?
Thanks
Click to expand...
Click to collapse
Not me, mine checks two POP3 accounts every 15 minutes and works very, very well. I'm delighted with the email client on WM6, very good.
mmm weird.
On the rare event when it picks up an email when is locked it keeps sounding the new emial alert.
May to a hard reset....
Oh dear... sorry mate, sounds like a might be
mmm, I never did find a solution to this.
I use the S2U app to lock. When it is in locked mode doesn't do the scheduled email pick up, only when the screen is active.
Anyone else having this problem yet?
I also use S2U and both my POP3 email accounts pick up emails fine. I also have MSN Messenger running 24x7 and that works fine too, beeping when someone sends me a text.
Sorry I can't help any further.
Hello my Friend,
you will be very happy, after reading my text (i hope so). The answer is very simple. I have had the same problem. After many Hardresets and contacting my provider there was no solution. But the answer is: You have to use one of the following programms called "Kaiser Tweak or Schaps_AdvancedConfigTool". There are two points, where you can set the "Suspend Timeout from AC resuming and Battery resuming". I have set the values from 1 second to 75 seconds. After that your emails will be checked perfectly in suspend mode. To find this solution has cost me a lot of lifetime. Good luck
hennesderbock said:
Hello my Friend,
you will be very happy, after reading my text (i hope so). The answer is very simple. I have had the same problem. After many Hardresets and contacting my provider there was no solution. But the answer is: You have to use one of the following programms called "Kaiser Tweak or Schaps_AdvancedConfigTool". There are two points, where you can set the "Suspend Timeout from AC resuming and Battery resuming". I have set the values from 1 second to 75 seconds. After that your emails will be checked perfectly in suspend mode. To find this solution has cost me a lot of lifetime. Good luck
Click to expand...
Click to collapse
You my friend are a hero, that works perfectly now.
Thanks a lot.
You are welcome! Enjoy your Orbit2 now.
So humiliating but....
Errr, I've had one O2 Orbit II already, had to send it back (pricing issues/better deal. There was nothing wrong with it). On that one I did have direct push working.
However on the new one, I can't for the life of me think/remember how I activated it.
I've got the exchange server settings for work, but when I try and set up a new account on the Orbit, all I have is the options for POP or IMAP, there's nothing for Exchange...
Am I missing a click somewhere here?
Hi
I have i-mate ultimate 9502 and I often face a very annoying problem: The call stops or the voice of both me and the other caller sounds strange (scratchy-sqeeky- i dont really know how to describe it).
This happens when a notification pops-up when i am in a call.
Does anyone know how to solve this?
panagiotis13 said:
Hi
I have i-mate ultimate 9502 and I often face a very annoying problem: The call stops or the voice of both me and the other caller sounds strange (scratchy-sqeeky- i dont really know how to describe it).
This happens when a notification pops-up when i am in a call.
Does anyone know how to solve this?
Click to expand...
Click to collapse
I have been notified about an incoming SMS whist on a call today. The SMS has been correctly announced on my earpiece, and the call has been kept stablished as it should. Nothing weird has happened.
I wonder whether you are running the official WM6.1 ROM from i-mate, like me, or not.
Just my 2 cents...
Cheers!
Carlos
Yes I am using the official WM6.1 ROM from imate.com. Anyway, i really appreciate your response, I will try to figure it out. I am concerned though from the imate's bad support. If they need 10 days to answer my mail message, imagine how long it will take to repair my phone if needed!
Anyways, any other help is more than welcome!
cheers
p.
This has been an ongoing problem with my last two phones. First was an HTC Touch Pro, now an HTC Touch Pro2. It doesn't matter if I am on a stock or custom ROM or whatever.
I noticed that when I called people, especially when the headphone jack was plugged in (using the auxiliary port in my car speakers) that people would be unable to hear me for a good 5 to 30 seconds. I could hear them but they couldn't hear me. Eventually they'd be able to hear me.
I kept killing processes one by one until I narrowed it down. It was Microsoft Voice Command! I was really surprised because I use the program only for announcing who is calling me (very nice feature so I don't have to run to the phone if it's someone I don't care about). I don't use it for dialing or anything of the like.
I have Googled for hours and a few people have the same problem but the only fix appears to be "don't use Voice Command" which sucks. I guess what I'm asking is if either a) there's a way to fix MSVC so this doesn't happen or b) there's a program that announces who is calling you that I can use instead of MSVC.
MSVC was annoying anyway because when you click "mute ring" when someone is calling you it still repeats the name! Pretty stupid. So I guess I'd just like some sort of replacement program for announcing incoming calls. Any suggestions would be greatly appreciated.
Have you tried fixing this issue using this?
http://forum.xda-developers.com/showthread.php?t=586901
Pumpiron579 said:
Have you tried fixing this issue using this?
http://forum.xda-developers.com/showthread.php?t=586901
Click to expand...
Click to collapse
Thanks but that program did little more than allow me to change the volumes and speeds.
I have the same issue with my Blackstone. When I check the running process I find that Voice Command takes almost 100 pct and James everything else.
I also Need it to announce who is calling.
Yeah I'm essentially giving up on MSVC ever working correctly, so if anyone know of a program that just announces who is calling, that would work just great.
daddylonglegs said:
Thanks but that program did little more than allow me to change the volumes and speeds.
Click to expand...
Click to collapse
LOL,Yea, it does a lot but I would ask your question about your headjacks in that forum. I am sure you would get an answer.
um, what versions are you guys using?
tried using an up to date one?
Microsoft_Voice_Command_v1.6.23562.cab
(for 6.5.x)
Microsoft_Voice_Command.v1.6.21881.cab
(for 6.5)
pyrorob said:
um, what versions are you guys using?
tried using an up to date one?
Microsoft_Voice_Command_v1.6.23562.cab
(for 6.5.x)
Microsoft_Voice_Command.v1.6.21881.cab
(for 6.5)
Click to expand...
Click to collapse
I am on 6.5 and your CAB is actually older than what I have cooked into the ROM... :\
MVC1.6 - no please! i am looking for a Voice activated app...
What good is that MVC1.6 if you have to Press a button and then say command? its called crap. Such a Program is already inbuilt in my WM6.
I am looking for a Voice program that keeps running in the background and its always in the listening mode and I can simply "SAY" these commands "as well".
1) WakeUp - wakes up my PPC
2) Sleep - PPC goes to Sleep mode (PPC is On though)
3) Programmed to wake me up at a particular time (by a beautiful Virtual Girl)
4) and Features of MVC1.6
is there anything like that for PPC WM6 ? CE5.2 version?
regards
fifthelement