Database Info

Calls switching from bluetooth HF to handset after notifications

Hi All,
Has anyone experienced this:
Talking on the phone using a bluetooth hands free (Moto H500) and any kind of notification comes in (new txt msg, new voicemail, low battery, etc) the call switches from the headset to the handset. I only had this happen in the WM6 ROMS, but it has been in all the ROMS i have tried. Maybe there's a fix i missed somewhere, maybe it only happens to me... Any thoughs or suggestions would be greatly appreciated.
thanks

Ya, I have the same issue with the WM6 ROMS.
I think I solved it though. You have to set Voice Command to only announce notifications though the device speaker. That seems to have solved the (annoying) issue for me.

Thanks for the info GadgetGuy, I'll give that a try... I just prefer that the people around me not know I just got a new message or my battery is low... If I find anymore on that I'll post again.

Call waiting bug

Hi,
I found a bug in my HTC TyTN II: when I call someone that is already involved in a conversation with other person, my HTC doesn't show me that I am in call waiting state (only say Dialing). Of course, he must have call waiting active, if not I receive the Busy notification.
This is very annoying: I disturbe him because I don't know that he is already talking and continue ringing (
I installed a lot of ROMs on my PDA (now I have L29 Diamond V5), but this bug was present all the time. Anyone now how to fix this?
Thanks a lot

This is funny
I don't belive that you are ok with this bug : check your Kaiser's. Nobody have nothing to say? Dutty, Schap, Laurentius, HyperDragon, NOBODY?

have u tested this scenario with some other phone?

Bug
Yes, that's how I realised that is a bug. A Nokia is telling you in this situation that you are in state "Call waiting". Try'it yourself

do u mean to say that u put ur own SIM card in nokia handset and then tried this? or u tried with some other person's SIM card in his/her nokia?

Phones used
I mean that I use 2 Kaiser's and 3 Nokia for testing. Every time Nokia corectly report "Call waiting", but Kaiser is reporting always "Calling", without making any difference. Please, try yourself a test (problably most phones will report corectly "Call waiting").
Thanks,

i've Elfin (HTC Touch) with my own cooked ROM. and i never faced this problem. and i dont really think that this is the ROM's problem. can u confirm this problem after using only ONE sim card with all these handsets?

Trying
I made a short test: I used another SIM with my Kaiser and the same problem. Also I can tell you that this new SIM used with a LG Shine show the corect message: "Call waiting". So, not the SIM is the problem

flash a shipped ROM to ur phone and test try this out to see if u face this problem.

On AT&T in the US I have never had a phone give me a call waiting message. What network does this? Sounds interesting but how does your phone know if the person you are calling is already on a call? As far as I know there is nothing in the switch to report that back to you, just a busy/not busy response. If the person has call waiting it sends not busy and you will ring their phone. Maybe this is just the verbage of your other phones while dialing? And does hearing a couple beeps in the background while you are talking to someone really bother you? I find it nice to be notified that someone else is calling. No ideas here though sorry.

Flash ROM
Sirooga: it's VODAFONE, and yes, the network know that you are involved in a call and send a different signaling to the new caller. That's why you must see "Call waiting" on screen.
Htctouchp: I change a lot of times the ROM. Now is L26 Diamond V5, Radio: 1.65.20.29. What do you mean by flashing a shipped ROM? Other version (if yes, which one) or original version (I have original version when I bought the phone and the same story).

firsthtc said:
Sirooga: it's VODAFONE, and yes, the network know that you are involved in a call and send a different signaling to the new caller. That's why you must see "Call waiting" on screen.
Htctouchp: I change a lot of times the ROM. Now is L26 Diamond V5, Radio: 1.65.20.29. What do you mean by flashing a shipped ROM? Other version (if yes, which one) or original version (I have original version when I bought the phone and the same story).
Click to expand...
Click to collapse
its a strange problem really...i guess u better get ur phone to the service centre (after installing original ROM) and ask them to solve ur problem.

yes i have the same problem its driving me nuts... i need that option which shows if the other person is on call waiting or not. i dont want my phone showing thats its dailing and the other person is actually on a call.

hey everyone.. its nothing wrong with the phone or the sim/operator.. its an issue in windows mobile, it doesnt show the notification.. it seems microsoft missed the feature.. somebody gotta develop it.. and i've got some good news over places, but havent tested myself.. it seems that the samsung omnia (wm phone) have this feature displayed correctly.. mayb someone could rip it off the omnia's rom and make it work on other wms.. then its gonna b a solved problem for all..

Dialing forever on uitgoing calls, and no incoming calls

Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter

deechte said:
Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter
Click to expand...
Click to collapse
Does a different radio ROM help?

I'm a bit scared for doing that... It hasn't always been like this, so I'd rather send it back I think.

deechte said:
I'm a bit scared for doing that... It hasn't always been like this, so I'd rather send it back I think.
Click to expand...
Click to collapse
If it's under warranty, do that!

deechte said:
Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter
Click to expand...
Click to collapse
I'm experiencing exactly the same problem since a week with bepe 0.67 rom.
Please, anyone with the same problem?

sounds a little similar to this...
http://forum.xda-developers.com/showthread.php?p=2374406
hopefully that ^ solves the problem

Thanks for your reaction. It's not the same problem though, when my problem occurs it stays. I can never make a phone call normally again anymore, nor receive a call. I have to soft reset.

Kukatrap said:
I'm experiencing exactly the same problem since a week with bepe 0.67 rom.
Please, anyone with the same problem?
Click to expand...
Click to collapse
Do you have Webis Note2Self installed?
I cloned my device's software and settings to a new one from the shelve. After a few days the problem occured again. So it's probably not a hardware problem in my case. With the problem occuring, I changed the phone settings from Auto to GSM and the UMTS settings from Auto to GSM(900+1800)+UMTS(2100), both didn't solve the problem when it was occuring.
Then I opened Memmaid and discovered there was an instance of Note2Self (Webis) under the running processes. I closed that one down and closed Memmaid and then the problem was gone!!
On their forum, other users report about audio issues. I'm looking in to this further. I'm using N2S 2.01 build 2326.
[edit]
Yes! Upgrading to version 2.03 solved my problem! Finally!

deechte said:
Do you have Webis Note2Self installed?
Click to expand...
Click to collapse
Yes, I am!!
I'll upgrade, thanks.

I had the same issue with the standard WM6 ROM thats the whole reason I changed to Diamond R4 ROm, has not happened since then. One thing I did notice is that I had my phone in my hand and it came out of sleepmode by it's self and 3 minutes later after putting it back to sleep I receive a message to say I had voice mail. Now I am thinking that the phone knew a call was comming in but it was to lazy to ring so it just sent it to voice mail. When I tried to call voice mail the phone connected but there was no sound. I had to power cycle the phone for it to work again.

PROBLEM: Microphone has delay when answering calls

Hi all,
when I want to answer a call, I have to wait for 1-2 seconds until I can say hello etc.
If I press Answer and say something, other side cannot hear me at the beginning..
If I'm calling somebody, it's working correctly (after short vibrate I can speak with other side with no problems..)
does somebody have same problem? or is there a solution for it?
thanks for every response

Maybe it's M$ way of making sure the other party doesn't hear the vibrate in there ear, it must sound awful. Just a thought but have u tried turning off the vibrate on connect? I have and nobody has complained they can't hear me but then again i don't get that many calls.

vibrate on connect is working only when you call somebody, not when you're called...this option has nothing to do with that delay

I have the same issue. Not so many ppl are talking about this (i think this is the 2nd topic about it, and the first one had a short life-cycle) , so i assume this can be country specific (i'm also from slovakia and my provider is also orange). Btw, this small delay is also noticeable on my friends kaiser.

Same here
Hi Guys,
I'm also from Slovakia and the same issue here as well. I think flgm is right, this could be a country problem. Btw, who is your provider? Mine is Orange...
sorry, just noticed yours is Orange as well. So I think that means problem solved....

Hi guys..so, I've tested it with O2 provider and the other side said that it was all okay...so it looks like it's Orange-specific :-(

Yes, I had the same experience with T-Mobile, wonder why I didn't have that problem with my previous phones though.

so..we will wait for new radio fw..and maybe it will be fixed..

Yes, I think that should do it

as far as i can tell, this is a wm thing. happened on atom exec aswell

I am in Romania on Vodafone and I have the same problem. Press answer and count to 2 before the other side can hear me. Also, I have GPS lag.
Never happend on Kaiser.

hmm, hope there will be a reg fix for that

try this:
http://forum.xda-developers.com/showpost.php?p=2738077&postcount=12
works well for me

I'm on Orange France.
The same happens on my Kaiser and my TouchPro.

Im on o2 i have the same problem, takes 1 to 2 seconds before other party can hear me

You could disable HTC's dialer and let WM dialer take over. You won't have the problem anymore.
(and also no more flip to mute or vibrate on connect)

Hi all,
I also encounter this issue with my TP, I'm from Holland and my TP has the original HTC rom and my provider is KPN. I don't think it's country related. It could be that not everyone has noticed this 2 second delay when answering a call. Hopefully this can be fixed with a radio update or some kind of tweak

Have the same issue (Vodafone, Holland). Though not many people complain about it, it is not more than 1 second.

It's the same thing for me and I'm in Sweden and on Telia, but I don't see that as a big problem though. Haven't had any complains yet..

I've tried to use Windows Dialer and there is no delay with it..BUT..the bluetooth icon is not showing when it's enabled and dialer screen is shown for about 2 second after the call has ended
PS: there is an application, that can vibrate when call is connected..http://htcs620.blogspot.com/2008/10/viborvanie.html (use google translator pls )

No call waiting beep. HTC Fuze WINMO 6.5

I have an HTC Fuze with a windows mobile 6.5 rom installed.
Well I have a call waiting the device does not trigger an audio alert. I therefore miss the call.
The phone does however turn on the backlight and display the incoming call but, as you can imagine, I am not looking at the device while I am speaking on the phone.
I checked sounds and notifications but did not see a "call waiting" event.
I have gotten everything else to work well but am considering going back to 6.1 if I can't resolve this issue. I am new to this world and appreciate your understanding.
Please Help

I'm having the same problem, did you find an answer?

I also have the same problem on the Feb 6th release of the Energy ROM. If you find an answer please post it. Thanks.

Found Solutions:
http://discussion.treocentral.com/t...n-sounds-while-call-can-we-stop-some-how.html
http://forum.xda-developers.com/showthread.php?t=478921