Touch Pro TouchFlo3D Crash - Touch Pro, Fuze General

Hi,
It's happened to me twice in the first week already.
TouchFlo 3D 1.2.34591.1_1813.6
Crashed once on startup, and distored the whole screen. Have to do a soft reset.
It crashed again just then, on wake up there is an error about Manila (I believe that's the TouchFlo program name), then it distorted the whole screen again.
Has anyone had this problem?
Could this be a hardware problem?
Cheers
joymike123

i have the same problem!

I have the same problem too, although it happened to me only once. It had been charging all night and when I turned it on (still on the charger) the screen was distorted. The white leds around the dial were permanently lit.
I didn't get an error message. No button worked, including the standby button. I had to remove the battery to shut the device down. Anyone else with this problem?

Me too:
first time with ship wwe rom from the box
second and third with RUU_Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphael_CRC_52.33.25.17_1.02.25.19_Ship.exe (this one is little better than original ship)
Usually the device crash after 1 or 2 days without soft resets

Same thing here with WWE_1.90.405.1!!!

Related

VOX Getting shut down automatically

Hi,
My VOX sometimes gets shutdown automatically. It happens at least once in two days. And whenever it shutsdown, I can feel that the handset has become slightly hot. I need to remove the battery and put it back to turn on the phone again.
But one strange thing I noticed is that, if the bluetooth was on when the phone went down, I can see the bluelight blinking even when the phone seems to be shutdown.
Do you guys know what could be causing this?
My Radio Version is 4..13.41_02.88.90 and OS is 5.2.1236 (Build 17741.0.2.1)
Thanks pals!
Sounds like it's over-heating possibly? If the BT LED is blinking blue, then the device is still on, I think you have some software that is either causing it to run at full load or causing a soft reset.
hum, maybe this has something to do with the problem already reported in some posts of some VOX's
the screen goes black, but the phone remains on
normaly if you wait a couple of seconds, and try to mess with the phone again, it will be alright,
sometimes i even have to remove the battery
some say the problem could be overheating as u say, but until now, i havent found any solution for this, i also am facing the same problem
Same problem for me when turning on the Wifi, but the phone turns off completly and the battery showing empty after turning the phone on, I have to remove the battery each time!
But when it's connected, my phone runs perfectly.
Maybe I have to change my battery, no?
I don't think in my case the phone is on (except for BT light blinking). Otherwise it should be in a big hung state where it is not able to respond to keyboards, power key or any interface at all.
Next time I encounter this problem, I will try calling my own number to see whether the radio is on.
I have been using this vox since last 8 months, but in the last couple of months I have encountered quite a lot of problems like radio repeatedly getting turned off, first call after restart hanging (not consistent but happens most of the time I restart the phone and try to make calls with in the first 20 seconds after bootup) etc.
Do you think an upgrade 6.1 would do any good?
Thanks again!!
I was having that problem too. I tried upgrading to WM6.1 and upgrading the radio, nothing worked. I sent it in and they replaced the mainboard, but now it seems to be worse. I just got it back though, so I haven't called them about it yet. I'm just looking around to see if it could be a battery issue.
My phone restart issue was mainly a hardware or loose contact issue. Once the phone fell down and after that whenever there was a long press on 0, * or # keys, the phone would restart.
After two days my phone fell down once again from my hand and this issue got resolved forever. Lucky me!
My S710 HTC original, shut down every day at 00.16. In the past was at 02.46, and I discover it since during my trip in asia I found the phone off.
More over the alarm is not reliable and cannot be used for this reason.
The following application are installed:
- Customisation from HTC for my operator TIM
- microsoft Office mobile upt
- pmCleanSP
- spWZTools
- Skype
- Tom Tom
HTC service told me to flash it with Rom update.
Any suggestions?
Thanks

[Q] Black Screen on Wakeup?

I just started having this "bug" yesterday. Basically, what happens (randomly) is that when I press the power button, remove the stylus, or slide the phone open to wake it up I'll be met with a black/blank screen. The backlighting will be on, and the phone is responsive (can receive messages, make calls, sounds/notifications work), but I won't be able to use the screen. If I use the power button to turn the screen back off and wait a few seconds, the screen might start working again. This is completely random and I cannot duplicate it with any guaranteed process, but it seems to be when the phone is waking up from standby. After a soft reset, probably half of the time I'll be met with this same delima, which leads me to believe it's hardware and not completely software.
At the same time the phone is also struggling to re-paint the screen from the change of Landscape-to-Portrait and visa versa. Also opening and closing windows to get back to the today screen also cause a problem. I've disabled TF3D to see if that makes a difference, it doesn't. I have a blank today screen with no plugins to free up the system resources, and am still having this issue.
I'm using JD's Rom (probably around 1.3, it's been running fine with no issues up to this point).
I'm also using S2U2 1.35 (if that makes any difference, haven't had any problems until recently)
The phone has never been dropped, it's in InvisibleShield, and normally sits on my desk charging all day.
This started happening last night for no apparent reason and it's really starting to irratate me.
Any advice is appreciated. Thanks.
Re the black screen:
Sounds like its software related. For example, I sometimes have this if I leave PocketTwit in the foreground and turn off phone. What software did you install yesterday? Also, do you try to press the home key and see if that clears the screen?
After more testing..
After some more fiddling around with the phone I'm about 90% certain it's a hardware issue. I noticed that when I slide the keyboard out if the slide portion is past the number line then the screen will stay on, but not update. I don't know how well I can explain it. If I'm typing and hold the screen to keep it from opening all the way then I can see the letters/words appear (in txt msg/email), but if I let the screen goes and it slides all the way open then the screen will stay on and only show what has already happened, any more typed characters will not appear, but if I move the screen back to the number row then the screen will re-draw and update what has happened.
Is this something that Sprint should fix no questions asked?
lulugirl896 said:
Re the black screen:
Sounds like its software related. For example, I sometimes have this if I leave PocketTwit in the foreground and turn off phone. What software did you install yesterday? Also, do you try to press the home key and see if that clears the screen?
Click to expand...
Click to collapse
The last piece of software I installed was Gyrator 2 on Friday-ish. Thinking that it was the problem, I removed it using MemMaid. I'm going to give the phone a flash tonight and see if it is software related (hoping for the easy fix) but as the post above says, I'm almost certain it's a hardware issue. I just wish I knew how it happened. . . So much for that time putting those InvShld on.
Final Update (this can be closed)
I took it into a Sprint store and they replaced the "flip" on the top for free (I have insurance).
Point of the story/thread, this can be closed, it was a hardware issue, and now it's fixed.

unlimited vibration

Hi guys,
When I get a message the phone vibrates 3 times, like normal. But sometimes randomly it vibrates 1 time and then unlimited vibration. Until I get it out of my pocket and press the powerbutton so the screen goes on again. When the screen is on again the phone resumes the 2 vibrates. Very strange. I had it on multiple roms with different radio's. I don't use TF3D but HTC Home Plugin VGA edition.
I've experienced the same issue you speak of with the stock ROM, and I haven't found a solution or cause yet either.
I think it was this what caused my phone to sometimes go out. Because the vibration consumed all the power.
Do you use Touch Flo?
_MsG_ said:
Hi guys,
When I get a message the phone vibrates 3 times, like normal. But sometimes randomly it vibrates 1 time and then unlimited vibration. Until I get it out of my pocket and press the powerbutton so the screen goes on again. When the screen is on again the phone resumes the 2 vibrates. Very strange. I had it on multiple roms with different radio's. I don't use TF3D but HTC Home Plugin VGA edition.
Click to expand...
Click to collapse
That would be the angry bee. It is something that just happens. I've had it so bad that I have had to soft reset the phone. It only happens to me every great once in a while. However, I haven't run the stock rom since about 2 hours after buying the phone.
has happened to me twice now.
ive had the phone about 2 months.
Dane Austin said:
That would be the angry bee. It is something that just happens. I've had it so bad that I have had to soft reset the phone. It only happens to me every great once in a while. However, I haven't run the stock rom since about 2 hours after buying the phone.
Click to expand...
Click to collapse
I've had it happen to me a few times and had to soft reset it to make it stop. It doesn't happen too often, so I haven't been too worried about it.
I've had it happen when I launch an application just as it is starting to vibrate to signal a notification.
Do you guys also always have it as the second vibration? When it hangs it always is the second vibration at me. And when I press the screen again he makes 2 after it again.
I had a similar issue with the initial stock rom - my wife messaged me in the middle of a meeting and my phone would not STOP VIBRATING. Since it was on the desk, it buzzbuzzbuzzed really loud.
Now I'm on the Energy 3.0 rom and have not had an issue. Even with the updated leaked stock rom I didn't have the issue.
I discover that it only vibrates wrongly when I have the screen off. Pretty annoying though.
Don't we use some kind of stuff in common?
I use:
HTC Home VGA Edition for front end instead of manilla
HomeScreen++ for the handy shortcuts
I checked some things again, I am not 100% sure but I think it was HomeScreen++ that caused the problems here. The exact settings: at the Tools tab "Lock if Display is Off and vice versa, which didn't work anyway at the touch pro (did work on htc's I had before though), but I checked it off and now it still rings 3 times and no less or more. Hope this was it.
I do not use HomeScreen++ and it happens to me at least once a day, sometimes twice. Mine always seems to happen on the third vibrate, it will do the first two and then the third one just stays on. I press the power button for the screen to come back on and it stops.
I have it too sometimes.
EnergyRom 3.0
And you guys have something that auto lock the screen when you press the power off button? Or do you lock the screen before pressing the power button? Because here it seems to have something to do with the locking in combination of the standby mode (screen off)

Black screen of death

The other day, I hit the power button on my touch pro, and the screen didn't come on. I did a soft reset, and it started working again. Now today, the same thing is happening, but a soft reset isn't helping.
The screen's back light comes on, the LEDs on the buttons come on, and the phone seems to be working fine. I hear all the sounds, including the HTC sound while it is booting, and the new message sound, but the screen stays black. It still recognizes touches, it just doesn't show an image. I want to do a hard reset, and will if I can get it to come one one more time, but its been about a month since I backed up my contact list. Lesson learnt there. I'm afraid it might be a hardware problem since I don't see anything while its booting either.
Anyone know if this is a known hardware issue with the touch pro? The phone is less then 3 months old, and I've been real careful with it. I haven't dropped it from more then 2 feet, and even that was onto carpet. Its the Verizon version if that makes a difference, and I'm running one of the NFSFAN roms. Its not the newest one, but rather the one posted on October 19th. I doubt its the rom, though, as I've been using it for around 2 months with no issues.
EDIT: Ok, I went into the bootloader to see if it was hardware of software. I figured if it was hardware, the screen would be black, and if it was software, it would be the rainbow. Sure enough, the screen stayed black. Hit the reset button, and the screen actually came on! Go figure. Went to do a backup, and the screen literally crapped out on me while I was watching it. Definitely a hardware problem.
similar with Touch HD... kinda
I've been having a similar problem with my Touch HD. The problem is very intermittent though and is sometimes hard to reproduce. The screen and phone will be working fine then once in a while when I push the power button to lock the phone, I'll unlock it and the screen stays black. I know that the phone is still on and even unlocked because pushing the buttons at the bottom makes the phone vibrate. The only consistency in reproducing the problem happens after I do something major on the phone such as making a phone call, browsing the internet, sometimes charging the phone. Other than that, I can sit here and push the power button all day and it'll come on and off with no problems. When the screen does go black I've taken the battery out repeatedly as well as repeatedly rebooted the phone until it comes back on. I've tried doing hard and soft resets to no avail. I've tried deactivating "turn off backlight if device is not used for" and "turn off device if not used for" without any resolve. After this I've even left the screen on (disabled backlight off) to see if it flickers or shows any sign of being faulty and it seems to be fine. I'm currently on Dutty's HD WM 6.5 Leo R5 WWE rom, but this has happened with two other roms (NRG, LIA). Other info include:
OS: 5.2.23016
Manila: 2.519192828.0
Radio: 1.14.25.24
Protocol: 52.64.25.34H
I guess the only consistent software has been my radio. Please help! Any advice would be awesome. I've tried google search and xda search without much help. Thanks

Need help identifing reason for strange and frequent freezes

Hi guys
I have this strange behavior going on in my Sentation.
Out of nowhere my phone started to have strange screen behavior... Didn't light up after pressing the power button (had to phone my self in order to get screen on).
The next thing was that suddenly the screen goes to maximum brightness or goes to minimum without any explanation (tried both auto brightness or manual).
After that I noticed that the screen went off when I was using it but when I pressed the left side of it it lighted up and off again... making me think of some kind of bad contact underneath. As I already had changed a broken touch screen for t3 times, and let the phone fall for several times I thought it had to do with some plug out of line...
I disassembled the phone completely and mounted up back again. The thing is that the phone started to freeze every 5 minutes (screen on but completely freezed. I have to pul out battery). Sometimes it freezes even in the recovery menu. I've tried several rom's with full wipe and not installing anything and its all the same.
Some times I still not that the screen goes off during the freeze but when I touch the left side it goes on again, but that doesn't change the freezed state even that I let down the phone for several minutes.
I disassemble the phone again, tried different back cover and different battery (one stock and other extra strength) I tried also all the suggestion related to the small pin in the back not connecting well with the back cover (adding an aluminium foil, pulling the pin out, etc..)
Nothing seams to resolve anything so I have clearly an hardware problem... but I don't know what to replace or where to look the damage!!!
Can anybody help me please?!
Update
I have an update on my problem:
I noticed that when I leave the phone on top of some kind of metal part and don't touch it it works all day without any problem but, as soon as I start to touch the phone, it freezes within minutes!
Could it be some kind of static electrical problem? How to resolve it?
I would apreciate any help
Thanks

Categories

Resources