Hi everyone, I have Samsung i600 (with WM6 ROM), and my problem is that display turns on every 40s while connected to activesync over bluetooth (when connected over USB cable, display stays off).
Have you encountered this? This problem is mentioned in several forums, but no one knows answer (google 'backlight during activesync bluetooth')...
Thank you!
keff said:
Hi everyone, I have Samsung i600 (with WM6 ROM), and my problem is that display turns on every 40s while connected to activesync over bluetooth (when connected over USB cable, display stays off).
Have you encountered this? This problem is mentioned in several forums, but no one knows answer (google 'backlight during activesync bluetooth')...
Thank you!
Click to expand...
Click to collapse
I have the same problem.. did you find a solution?
Thanks!
Related
Hi folks,
maybe someone of you had or has the same problem like I do: almost every time when I disconnect my mdaii (with Windows Mobile 5 installed) from the cradle, the activesync does not stop! It remains in memory of my mdaii as a running program and even I stop the task it seems to be there. So, the battery life goes rapidly down!
Does anyone knows about the problem or has a solution for me?
I use mdaii, Windows Mobile 5 and activesync 4.1
Thanks in advance
Greetings from Germany
S-Bee
me too , i dont know what is the problem ?
...first of all, my configuration:
G3 Wizard (i-mate branded)
- IPL/SPL 2.18
- radio 2.37.11
- NBD 7.4 touch
my phone works perfect all time but 1 hour ago I've connected it to my pc and SURPRISE: no power light and no charging....
O__o i've changed my usb cable but...nothing!
I've tried to connect to power usb cable (original shipped with my wiz...): nothing at all....PANIC!!!!
hard reset....no solution!
i've tried to connect cable very slowly and...now it's charging but....
...NO ACTIVESYNC!!!
i've tried to connect/disconnect some times and power charging is perfect but NO activesync...
ANY IDEA????
------
extra info: last efficient connection is via WM5torage to a customer notebook...and it works ok
now...also via WM5torage NO DATA TRANSFERT
in bootloader mode it connects...and i downgraded succesfully to last official wm5 italia i-mate rom.
...but no connection
did you try another computer? or the power adapter that plugs into the wall?
yes, of course!
pr0naLd said:
did you try another computer? or the power adapter that plugs into the wall?
Click to expand...
Click to collapse
...it's a good question: too many times it's a joke...but not now.
i've tried in 3 computers...and the response is the same: NO connection, no "usb error"...nothing...only power charging....
If I put (with camera button and softreset) in bootloader mode it's ok...
"bip" on computer and USB un the bottom of the tuchscreen.
I've upgraded anothet time to NBD 7.4 but...
NO CONNECTION
This doesnt really belong in the wm6 forum i think. but maybe you also got a bad activesync on the computer, just start everything fresh again
...usb activesync now works!
after 7 (seven) downgrade and upgrade wm6 -> wm5 -> xda6 -> wm5 -> xda6r2 -> wm5 & so on....
ACTIVESYNC NOW WORKS!!!!
(obviously SAME computer, same Activesync 4.5, same USB port/cable)
i don't know why....but...
I'm HAPPY
thanks to all!
tommaso
TauRho said:
...first of all, my configuration:
G3 Wizard (i-mate branded)
- IPL/SPL 2.18
- radio 2.37.11
- NBD 7.4 touch
my phone works perfect all time but 1 hour ago I've connected it to my pc and SURPRISE: no power light and no charging....
O__o i've changed my usb cable but...nothing!
I've tried to connect to power usb cable (original shipped with my wiz...): nothing at all....PANIC!!!!
hard reset....no solution!
i've tried to connect cable very slowly and...now it's charging but....
...NO ACTIVESYNC!!!
i've tried to connect/disconnect some times and power charging is perfect but NO activesync...
ANY IDEA????
------
extra info: last efficient connection is via WM5torage to a customer notebook...and it works ok
now...also via WM5torage NO DATA TRANSFERT
in bootloader mode it connects...and i downgraded succesfully to last official wm5 italia i-mate rom.
...but no connection
Click to expand...
Click to collapse
I had a problem like that once, I discovered it was my firewall blocking me out of active sync. I had outpost firewall, I disabled it and it connected perfectly
tphan2k3 said:
I had a problem like that once, I discovered it was my firewall blocking me out of active sync. I had outpost firewall, I disabled it and it connected perfectly
Click to expand...
Click to collapse
Yeah I use Cisco VPN for my work, and it screws up ActiveSync at times. Sometimes allows my phone to connect with no problem, and othertimes won't allow activesync to see my phone. Usually turning off the enhanced check box in the USB to PC connections settings will get around it, but not always.
USB port not working
Hello,
I have similar problem.
My I-Mate K-Jam NOT connecting via Active SYNC.
and When i put my device in BOOTLOADER mode there is no appear "USB" below the screen
But only it is charging WITH WALL CHARGER and WITH COMPUTER when i attach to PC
And therefore i can not upgrade my device with usb cable. Can you help me?
HOW CAN I CHANGE MY ROM WITHOUT USB CABLE??
I have tried a few search on this forum but i couldnt find a solve about that.
Sorry for my poor English. I hope i told well. Thanks your advance.
-------------------------
I-Mate K-JAM
IPL : 2.16.0001
SPL : 2.16.0001
GSM : 02.07.10
OS : 2.16.9.1
-------------------------
try this....
loverbadi said:
Hello,
I have similar problem.
My I-Mate K-Jam NOT connecting via Active SYNC.
and When i put my device in BOOTLOADER mode there is no appear "USB" below the screen
But only it is charging WITH WALL CHARGER and WITH COMPUTER when i attach to PC
And therefore i can not upgrade my device with usb cable. Can you help me?
HOW CAN I CHANGE MY ROM WITHOUT USB CABLE??
I have tried a few search on this forum but i couldnt find a solve about that.
Sorry for my poor English. I hope i told well. Thanks your advance.
Click to expand...
Click to collapse
i don't know if this one is a real solution...but...try this (no risk):
- first of all: try to change usb cable (with an old cable my kjam cannot connect....)
- try to plug usb cable SLOOOOOWLY: i've found that my kjam "communicates better" with my old pc il cable is "half-connected" (not tottally plugged in....
and...i don't know if it's possible to upgrade rom without usb connection....i'm sorry
(and sorry form my real poor english)
tommy
Similar problem
This may possibly not be the solution but I had a similar problem. I have an O2 xda mini s and after several days searching I discovered the problem. I opened up the xda and discovered that where the mini usb was soldered to the board, one of the solder points had come loose. The usb was not loose enough to stop the xda charging. By pressing down on the loose solder point the xda immediately showed up and syncing with my pc. I have now resoldered the usb back down and it works fine.
I hope that this is not the problem as it is damned fiddly soldering it back in place.
Hope this helps
I solved my problem
Hello Friends..
I have solve my problem,
I opened the k-jam and renewed the point of usb port with solder machine.
Now it is well working. Charging and sync.
If you have similar problem so i think you can try this one.
But i think you must very carefully.
Solder machine must be very thin.
loverbadi said:
Hello Friends..
I have solve my problem,
I opened the k-jam and renewed the point of usb port with solder machine.
Now it is well working. Charging and sync.
If you have similar problem so i think you can try this one.
But i think you must very carefully.
Solder machine must be very thin.
Click to expand...
Click to collapse
Have you been using some kind of holder for your wizard on your car?
I have seen several USB connectors with a bad attachment to the PCB because it has been used with car Holders that had the USB fixed.
Hello,
I was wondering if any one out there could help with this problem, i had a quick search on google and on this forum but to no avail albeit I'm not very good at searching.
When I'm at work (like now) I always have my HTC TYTN checking for new e-mails every 10mins or so... it's very important for me. I always bring my USB charger because this tends to drain the battery a lot.
The problem is when I connect with active sync my phone will not connect my tmobile internet thus it stops receiving emails and won't connect to the internet, only when i unplug my device from the PC it will, I was wondering if anyone else experienced this same problem?? I've played around with a few settings but nothing seems to be working.
Any help will be much appreciated
Goto file/Connection Settings/ click on "Allow wireless connection on device when connected to desktop"/ Click "OK"
For good measures if you are connected, unplug your ppc, close Active Sync, plug back in.
Hi, thank you for your suggestion...
I tried the following but unfortunately it didn't solve my problem
Fresh Start
You may also try deleating your device from Active Sync and then re-establiahing the connection with the above settings. Soft reset your divice at the same time.
Ahh no luck I'm afraid...
I've tried playing around with it afterwards but still to no avail, maybe it just doesn't like my work PC...
It can connect to the mobile internet, however it doesn't want to use that internet to cehck for email even after i set my e-mail to specifically only check for e-mail from my mobile connection, as soon as i unplug the USB cable i can connect no problems...
Thank you for your suggestions.
hello everyone,
I cannot get Activesync to recognize my htc touch pro no matter what i do,... i've uninstalled and reinstalled shut everything off then on, followed all of MS's advice, and nothing works,...
Any suggestions,...? No problems connecting my tytn II and my hermes,...
thanks,
ek
Are you running any firewall software? If so, this is relevant to you.
start>>settings>>connections>>usbtopc>> un check the "enable advanced network functionality"
sorry attnoob, was trying for your quick fix, but it didn't work,... thanks anyway,... now will go to the firewall issues noted above, but i already opened the ports as per ms's recommendations in help,...
will try other suggestions and get back to you,...
ok, so allenh, read all the info at the link you sent me, and actually did all these things yesterday, but it didn't work,... also, something strange happens when i hook the device to the PC in that, the device immediately goes to the 'internet sharing' program you use when tethering, it establishes a connection with the internet, and there is a comments saying 'check usb cable connection' and this never happened with the tytn II,...
your help is appreciated,...
ek
Check the USB cable
It seems the USB cable the Tilt uses and the one the Raphael/Fuze use are different, If i use the cable that i usued with my tilt the computer would not recognize the Fuze it will charge it though, only if i use the usb cable that came with the Fuze it works fine.
Are you using the stock ROM or a cooked ROM. Some of the new cooked ROMS are having this problem.
Also, are you using Vista or XP. The problems seem to be with XP.
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
btw, it didnt start doing this until i flashed NATF's v2.1 and also loaded a custom theme and toolbars and such.... it worked after i loaded NATF's rom, just randomly stopped at some point after that.
if you are putting on a new rom then put the phone in bootloader mode it worked for me
LostcauseZ06 said:
my fuze seems to also be having this issue... i can hear my laptop do the little noise saying something is attached but my phone never pops up with the screen anymore asking what i would like to do. sometimes i get lucky and it will randomly connect to active sync but would not give me any warning whether it was going to work or not.
Click to expand...
Click to collapse
My Fuze is doing this too, excep every single time. I can't get Activesync to work through USB. And I'm running the stock ROM. Internet Sharing automatically connects.
Okay, I set Internet Sharing to Bluetooth PAN (instead of USB), which kept it from automatically starting when I plugged in the USB. This let ActiveSync and the 'choose a connection type' startup on my Fuze and everything has been fine.
Try your PC Network settings
Hi,
I have the same problem recently. My AS does not want to recognize my Raphael. What I did was go to the network setting of the PC (Network Connections) and disable the 1394 adapter. Then my AS now can recognize my Raphael. The next unsolved thing is how to make the connection stable enough to make happen the syncing.
Drax
Hi, I had similar problem. Once upon a time the connection between my Touch Pro (WM6.5.3) and PC stopped working. Activesync did nothing and after a minute gave error message with troubleshoot guide. So I opened control panel ---> device manager (with mobile connected via USB), where I found "Windows mobile based device" between network adapters. I opened it and under it's advanced settings I found "network address" which was set to "unavailable". So I changed it to 192.168.2.2 and now it works again ;-)
Hope it helps someone ;-)
Hey everybody!
I searched all over the Internet for an answer, even sent an email to htc, but my problem wasn't solved.
I have this connection problem with my HTC TYTN 2. When I connect it to my PC, my PPC starts charging, but on my desktop I get no notification at all that a device has been connected. I installed Active Sync, HTC Sync, and still didn't find anything. What could this possibly be? I managed to connect my PPC through wireless and using WIFI Remote (a PPC app). But I need an USB connection so that I can fully use it. Please help me, I've tried everything (I think)