dear group,
this being my first post m expecting someone to help me out real urgent.
i m using xda2 with airtel gprs, india for quite some time now until recently when i came across this problem.
when i try to download any file directly to the sd card it gives an error-' a device attached to the system is not functioning'. and the download process terminates.
however this never used to happen earlier. i have hard reseted my device but still no joy. although downloads to the storage n internal memory r complitely normal n so r my e mail settings, wap n ie work fine.
someone who can understand my problem plz help
dear group,
this being my first post m expecting someone to help me out real urgent.
i m using xda2 with airtel gprs, india for quite some time now until recently when i came across this problem.
when i try to download any file directly to the sd card it gives an error-' a device attached to the system is not functioning'. and the download process terminates.
however this never used to happen earlier. i have hard reseted my device but still no joy. although downloads to the storage n internal memory r complitely normal n so r my e mail settings, wap n ie work fine.
someone who can understand my problem plz help
hi buddy ..
i m use rls18 and kennal 6.25 .. i install sys in my nand and data in card ext2 and now i have 560mb for installations its good for me .. if any one what to know how i done then reply me ... tomorrow i will tell you all how i did and android working so good i cant explan ... what i did its good for me but i hope u also like it .. .,.. sorry for my english is not so good but i try my best .,... its 3d games also work so good .. i test only on my pola200 ...
u need to make partition like this fat32 how much u like and first ext2 must be 300mb and second 600mb and swapp2 is 70mb
when u make partition like this then u del ur ext2 which u make 300 after u restart ur mobile and vol up and d-pad ... then u sys install on nand and data on sd parition .. then install then put out ur sd card then make ur 300 ext2 .. then put again ur sd card in and make it on .. have fun
can you explain to us step by step
hi again
i have xda orbit2 pola200 ..
first i install 2.6.25 then i put my sd card in pc with card reader
then i make partitions i have 4gb class 4 if u use class 6 then its more good ..
i make my partition like this fat32 is 2.8gb and ext2 is 300mb and second is 600mb and swap lanx is 100mb ... i use partition for paragon its good and easy ..
when its done then i delete first ext2 which is 300mb then its show u 300mb unloucate show .. then make folder andboot and put in androidinstall and update .. then put back ur sdcard in phone and on ... hold vol up and d-pad and then u see menu then sys on nand and second in data on sdcard partition then install system ... after its complete then again do install update then restart ur phoine with pin ..
put out ur battery and put out ur sdcard with phone and put ur card in pc with card reader and open open again paragon partition .. and make partition again only 300mb in ext2 which show u unallocated then put ur sdcard in phone then put battery back to phone .. and on then have fun .... i hope u will be enjoy ... and i using Not So Super Froyo [RLS18] and its good for me if u need my setting then i will send it ....
if you use atools you can select the correct partition for SYS and DATA and you can avoid to create and delete the partition.
thanks but i dont know how to use atools bcos they show me .. sd partition p2 ,p3 .p4 but i dont know what is p2 p3 p4 partition .. if u giude me then i will be thankfull to you .. can u guide me how to use swap partition ?
loveyounw said:
thanks but i dont know how to use atools bcos they show me .. sd partition p2 ,p3 .p4 but i dont know what is p2 p3 p4 partition .. if u giude me then i will be thankfull to you .. can u guide me how to use swap partition ?
Click to expand...
Click to collapse
i try to do like you .
system on nand,data on sd
but it's so slow!
i just fell it's slower than both on sd.
I have tried to partition my SDcard.but its slower than install the android to a IMG file.It's so strange.can you tell me why?
hi buddy
thanks .. well i tell you what i did ... my use atools and i make my phone 450mhz and i also use swapper 2 its good and its 64mb ... its work fine ,,, but in first 20 mins its work slow after its work nice ... bcos every thing save in sd , data ,setting,etc.. i play fifa 10 and caligocha ,3d homebattle its work nice ... but first time its work slow after its 1mins its work fast ....oh u need one thing more which make ur phone more fast ... its ADWlauncher ex .. its very good ...
and can u tell me which sd card u r using ?
What is the problem with partitions?
If you divide the sd in several part you will have partitions.
First partition is in fat32 and you can't install system on it.
l1q1d said:
What is the problem with partitions?
If you divide the sd in several part you will have partitions.
First partition is in fat32 and you can't install system on it.
Click to expand...
Click to collapse
I'm just wondering why install system on a EXT2 partition is slower than on fat32.
I tried many times,but fat32 is always faster than EXT2.
This is very strange.
And,i flash your latest NBH file which release in the January 13.
I meet some problems.
it stop at
"install modules to kernel"
"to sourceforge"
How to solve the problem?i never meet in the past.
thank you !
loveyounw said:
hi buddy
thanks .. well i tell you what i did ... my use atools and i make my phone 450mhz and i also use swapper 2 its good and its 64mb ... its work fine ,,, but in first 20 mins its work slow after its work nice ... bcos every thing save in sd , data ,setting,etc.. i play fifa 10 and caligocha ,3d homebattle its work nice ... but first time its work slow after its 1mins its work fast ....oh u need one thing more which make ur phone more fast ... its ADWlauncher ex .. its very good ...
and can u tell me which sd card u r using ?
Click to expand...
Click to collapse
i use a 4GB class4 card,
of course,it will become fast after a few minutes.
but FAT32 is truely faster than EXT2.
I don't know why.
I always think running system on a virtual partition(IMG file) is slower than a real EXT2 partition.
But maybe I was wrong.
the image on disk should be slower so it's a bit strange.
You forgot to install modules (look in atools mixer or in this thread)
l1q1d said:
the image on disk should be slower so it's a bit strange.
You forgot to install modules (look in atools mixer or in this thread)
Click to expand...
Click to collapse
Thx!
I have read the post,but i don't found that what i should do.
please tell me what should i do ,thank you !
And,i have another problem,
I usually lost data,when NAND.
when android is crash,i push the Reset hole,
Than,I may not enter the system,get a lot of FC when see the desktop,or found that some software is lost.
Do you have this problem?
um..can you understand what i am talking about?
my english is so poor,Please forgive me
Can you upload all files i need for it and explain i got pola 200 to, and wonna try it, if that isnt to much work for you thx
@我是春哥: the loss data problem is now the big problem and there is one developer who is working on it.
in order to fix "install module" download the androidupdate.tgz from the thread (or sourceforge)
put it in /andboot (sdcard)
go to atools (bse) select your sys location and select apply update.
save the install-seq.sh
put it in /anboot
insert the sdcard in the phone
boot the phone.
OR
put it in /andboot (sdcard)
insert the sdcard in the phone
boot the phone
press dpad
on menu select apply update
and then quit
@damir1987: follow the step by step guide.
l1q1d said:
@我是春哥: the loss data problem is now the big problem and there is one developer who is working on it.
in order to fix "install module" download the androidupdate.tgz from the thread (or sourceforge)
put it in /andboot (sdcard)
go to atools (bse) select your sys location and select apply update.
save the install-seq.sh
put it in /anboot
insert the sdcard in the phone
boot the phone.
OR
put it in /andboot (sdcard)
insert the sdcard in the phone
boot the phone
press dpad
on menu select apply update
and then quit
@damir1987: follow the step by step guide.
Click to expand...
Click to collapse
thank you!
Before the problem be solved,i would not flash the android to nand.
I hope you can solve this problem，
Thank you for all you hard work!
why i intall system on nand bcos its safe and we dont loss our system file and its good otherwise our systam is crash and its not good things .... well my advise is this we use systam on nand its make ours android fast and safe and data on install on sd card what ever u like its img or ext2 its all up to you ... but its all safe what i say ,, bcos i test too much .... bcos when our systam android is crash its crash all things ,,, i hope u all understand ... fast boot is slow but in two or 3 boot its faster ... but remumber one thing how much we install games and software its make android havay ... i prefrar to 2.6.25 kernel ... bcos i play games and software its work fast ,.,, thanks you to all .. who try this ...
salut, how are you my friend i need help> i have a galaxy core and i given it many rooms but at last i do some thing stupid i puts a room in a phone memory in SD card so he taking a room and then he stopped and never open I guess that the bot file its been deleted so the phone Do not feel anything so i need your help And Thank you very much..
faredshawky said:
salut, how are you my friend i need help> i have a galaxy core and i given it many rooms but at last i do some thing stupid i puts a room in a phone memory in SD card so he taking a room and then he stopped and never open I guess that the bot file its been deleted so the phone Do not feel anything so i need your help And Thank you very much..
Click to expand...
Click to collapse
>which ever rom you are installing read the instruction first to; how 2 install
>phone memory & sd card is different... & use proper cmw .if u know how to install a rom ,definitely it will work. n dont think soo much..
any prob google it.. :silly::silly:
Hi guys I want someone to help me .
I have issue with my phone* that is the phone doesn't delet files .when I delet a file for ex 1g file or a game with that same size* .in the file manager the file was gone .
And my free storage space* was 1g after delet a file it should be 2g of free space and my problem it still the same a amount of* space before I delet the file 1g.and I try do factor wip and i even upgrade my phone to marshmallow but the problem it still exist
And by the way my phone is rooted* .
Guys pleas someone help me
...
No one now how to fix this problem
???????????????????