Database Info

Problem Htc Touch Cruise and Bluetooth Headset

Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!

Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !

academic said:
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !
Click to expand...
Click to collapse
Thanks for your answer!
I try with another headset...

Sirius75it said:
Thanks for your answer!
I try with another headset...
Click to expand...
Click to collapse
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.

Sony Ericsson bluetooth headsets work also just fine.

butzchan said:
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.
Click to expand...
Click to collapse
I have the same problem with my Motorola H700!
Going to try an old Jabra headset this evening.

Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
I have the same problem and sometimes I re-apply pairing between the headset and my polaris

same problem with Motorola H700. and olso motorola HS 810
They seem not to be compatible

I have reconnect my old carkit bluetooth Parrot CK3000 Evolution and with my HTC Touch Cruise work very fine!
With my old P3600, the parrot ck3000 evolution don't work fine but have problem with audio and connection, therefore i had unplugged and i had buy the headset Motorlola H700 thed worked well with P3600...

Same problem with Jabra headset
I have also exactly the same problem with a Jabra headset.
I found that the problem only occur when bluetooth is first activated on HTC and then activated on the headset. if I do it in the other way it works fine.
that's also the reason why it works after a soft rest of the HCT or disconnection reconnection of bluetooth on HTC.
Does it only mean that the headset is not compatible or is this a problem on the HTC.
Vincent

I don't know the bluetooth 2.0 + edr is compatible with motorola headset
perhaps a bluetooth incompatibility
i read on it http://direct.motorola.com/ENS/HKernel/H700_Headset_detail.asp
this : # Bluetooth Class 2 for wireless connection of to 10 meters
(30 feet)
# Compatible with Bluetooth 1.2- or 1.1-enabled mobile
phones, PDAs, PCs, and more that support headset and
hands-free profiles

I had the same problem with the H700. It connected fine the first day, and I used it for about 15 minutes. The next day, it wouldn't stay connected at all. Tried to re-pair, etc..no luck. My Jabra BT-125 works great, as does my LG HBM-730.

HTC patch for bluetooth
I saw on HTC (in the e-club section) that there is a patch for Touch (is it touch only or touch cruis also? I don't know) regarding "bluetooth connection problem".
Unfortunately I cannot download it.
If someone can do it, I'm interested.
Vincent

First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise

Where I can found the patch ?? I want to try it on my cruise. If don't work I will restore all with a backup file...

you can found it on HTC web in the e-club section. If the patch works properly write it in the forum please!

mesmo said:
First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise
Click to expand...
Click to collapse
Same specifications but different motherboard. Don't try it.

Ok......... thank you, I'll wait for another solution

After more and more test, I have found that the problem of the motorola Headset HS850 (and I think H700 etc. etc.) is the boom switch.
If you pair the headset to the Cruise and use it, it works fine (not stop after 3-4 seconds). Works great also bluetooth audio program:
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
for redirect all audio to the headset.
But... if you switch off the headset with boom close, next time it will not work more than 3 seconds
So, the problem on this motorola is the automatic connection when open the boom.

Sony Ericsson HCB-700
Hi. I seem to be having similar problems. I had 3 phones linked to my HCB 700, and all worked fine. Very occasionally, I would have found that one wouldn't pair up when the ignition was switched on, but with my old Orbit 1, that may have happened once a week. I got a new Orbit 2, and was able to pair it easily. Now, it never fails to start paired, but frequently drops the BT connection. Usually a simple button press links it again, but it will rarely stay linked for more than 30 minutes, and could drop the connection 3 or 4 times in 10minutes. Then it may work for 30 minutes. I tried a reset to default settings, and re -paired the two again, but it doesn't seem to have made any difference. This can happen whether I have used the phone or the handsfree or not.. I'm thinking of getting a Parrot kit now instead - any ideas? Thanks in advance..

HTC Cruise don’t work with my Bluetooth carkit (parrot).

Hi There,
I have a HTC Cruise (dutch) and a Parrot 3200 LS-Color bluetooth carkit.
My carkit sees my HTC and I can sync my address book but when I receive a call ore when I want to call it doesn’t work right. I have to put the telephone to my ear again. The speakers en mic in my car don’t work.
Can any one help?
Thanks,
marco

update your carkit
Are you sure that you are on the best firmware for your car kit?
I have a diffrent parrot car kit (mk6000), and all my pb was solved by: going to the last parrot firmware, and after updating my phone to WM6.1 (not sure that this second is necessary or not)
Houms

I have a Parrot CK 3100
Version 4.16
I have also HTC TC with WM6 original
Every think work fine

You can try the jetware bluetooth extension.
http://www.jetwaremobile.com/
It solved some problems with my parrot ck300 evolution.
\\Yoshi

My Parrot works fine with Polaris

Parrot 3100 working fine with Polaris here too.

I had posted my experiences with the new firmware update here:
http://www.parrot.com/forums/usa/viewtopic.php?id=1487
Hope that this helps
T

imo the parrot with the color screen is a waist of money, ck3100 is also more supported ! My polaris works flawlessy with my ck3100.

My Polaris works near fine with the CK3100, except the disturbing phantom call when your last call was not picked up...
The other minor problem is that the different numbers of one contact are shown separated (/H /W /M...) Does anybody know if it possible to show all together?

Parrot have a 4.17 update out.Try flashing your ck3100.

Canaan said:
Parrot have a 4.17 update out.Try flashing your ck3100.
Click to expand...
Click to collapse
Already flashed, but no changes.

grouchomrx said:
My Polaris works near fine with the CK3100, except the disturbing phantom call when your last call was not picked up...
The other minor problem is that the different numbers of one contact are shown separated (/H /W /M...) Does anybody know if it possible to show all together?
Click to expand...
Click to collapse
There is a prog on Parrot's website the creates a vCard of all your contacts in outlook this file is then sent to the CK3100 from your phone and all of you contacts are saved in the bluetooth kit.
I don't think the phone auto syncs these contacts though
JJ

Hi Guys,
I don't want to be rude, but the thread starter asks for a solution to his problem not a list of parrots which do work with the touch cruise. Not really helpful according to me :s.
Futhermore, I am also having a lot of problems with the Touch Cruise with the Parrot 3200LS Color. I installed the jetware bluetooth extension, which solved 99% of my problems.
The 1% left is disconnecting a phone call. If I push the red button on the Parrot device, the call is not disconnected. I have to push the red button on my phone to end the call, but still the 3200LS thinks the call is still going on. I have to pull the plug to reset the 3200 LS. I already flashed the parrot with the latest firmware.
Anyone any useful pointers?

Parrot and TC
Hi there!
I don't know about you guys, but for me it's simple, for HTC touch, and for TC with my parrot CK v3.13 here's what i do:
- to be shore, you reset your parrot (red + green buttons, then you hear "please pair device", and only with first pairing),
- turn on your TC's BT, go to settings/BT, Add new device (Mode - visible), and when parrot asks for code, it's 1234, as i recall.
- now you are paired, and when you enter in your car only thing you have to do is to turn on TC's BT, pairing will be authomatic.
this works for me, without any problems...
Hope this helps
Bye

Problems with the HTC and the Parrot sync.
I have an HTC polaris but I cant sync with the Parrot 3100, because allways says that the code or the connection fail. anyone can Help me to sync this 2 ???
Thanks
Portugal HTC user!!!

software to use wm6 device AS a bluetooth headset?

Hey,
I have a htc 620 running WM6.1 that I want to use AS a bluetooth headset for another phone. Is this possible? Many thanks,
Tim

tidixon said:
Hey,
I have a htc 620 running WM6.1 that I want to use AS a bluetooth headset for another phone. Is this possible? Many thanks,
Tim
Click to expand...
Click to collapse
you'v lost me here. How can u use a device as a headset ? I dont think thats possible....

The speaker and microphone. I guess not an actual headset, but I think you know what I mean now. I am looking for a way to connect the phone via bluetooth to some other device such that the other device thinks it is a bluetooth headset. I don't imagine many people have a need for this, but if anyone knows of any software that might work for this purpose, please, let me know! thanks,
tim.

I found this thing http://www.handango.com/ampp/store/...tType=2&catalog=0&sectionId=0&productId=55936 for ppc 2002 that lets you pair your ppc with a phone and dial your phone.
I guess something like this would work for me too, if anyone knows of something for windows mobile that would let me pair a window mobile device with a bluetooth enabled phone and use my windows mobile device to place calls from my other phone.

i see what u mean this software will work for WM devices as well at least it says so in the config

access to phonebook carkit?

I have a SonyEricsson HCB-150 bluetooth carkit in use with my G1. The carkit has a special function with text to speech. So it can speak the name out when somebody calls and it can also access your phonebook of your mobile. The phonebook-function is compatible with most of the new Sony Ericssons. I tried it with a Samsung I900 and it works also, but with my G1 it doesn't work.
So my question is, can someone modify or is it possible to change some settings that I can use it with my G1.
Thanks in advance!!

Your bluetooth carkit is probably using something other than just the basic handset/headset protocall. Since bluetooth on the G1 is extremely basic right now you will have to wait till they get the other protocalls coded (A2DP, etc.).

Dharkaron said:
Your bluetooth carkit is probably using something other than just the basic handset/headset protocall. Since bluetooth on the G1 is extremely basic right now you will have to wait till they get the other protocalls coded (A2DP, etc.).
Click to expand...
Click to collapse
so sad
thx for the answer anyway

M3 SMGII said:
I have a SonyEricsson HCB-150 bluetooth carkit in use with my G1. The carkit has a special function with text to speech. So it can speak the name out when somebody calls and it can also access your phonebook of your mobile. The phonebook-function is compatible with most of the new Sony Ericssons. I tried it with a Samsung I900 and it works also, but with my G1 it doesn't work.
So my question is, can someone modify or is it possible to change some settings that I can use it with my G1.
Thanks in advance!!
Click to expand...
Click to collapse
I'm in the same situation - the bluetooth will pair and momentarily connect with my bluetooth carkit - then it shows "loading..." on my car - then immediately disconnects.
If you get a fix on this - I'd appreciate knowing what it is too. thanks!

[SOLVED]BMW bluetooth - an expensive accessory does not work :(

Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
UPDATE 2010/03/29
a half solution is to start the car, then turn the BT on the phone, then it works perfect.
the reason why his is a HALF solution only: next time you start the car you have to start BT on the phone again ( I am used to have my BT working 24/7 )

a_petrov303 said:
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
Click to expand...
Click to collapse
You could always buy a more expensive phone to go with that expensive accessory
Only joking

a_petrov303 said:
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
Click to expand...
Click to collapse
Not BMW, but I have it working perfectly paired with my Ford car system. So I'd suspect is most likely a settings isue one side or the other rather than anything fundamental.

well I have noticed that it works well with newer idrive models, but mine is 2005 MY so no idrive and no luck

ive also heard alot of complaints like this ... not being able to read phonebook
ill try today in 2008 toyota

souljaboy said:
ive also heard alot of complaints like this ... not being able to read phonebook
ill try today in 2008 toyota
Click to expand...
Click to collapse
or no, the phone book is excellent
it is not being able to call or receive calls what bothers me
and as I said, it works with newer iDrive BMW

oh , calling/recieve works for me .. radio fades out and its good
maybe u should try bmw forum ?

souljaboy said:
oh , calling/recieve works for me .. radio fades out and its good
maybe u should try bmw forum ?
Click to expand...
Click to collapse
Yes, I have tried 2 bmw forums, but they do not know about WM 6.5 much
this is my first WM phone, all the other phones worked in the same car.
I managed now to get sms to show on the screen of the car, but calls is more important
people here in HD2 forum said they exange some big (5-6 digits) number in the registry and it works for them, but I am pesimistic about this because they have different BT stack, right?
HD2 - widcomm
TG01 - MS

well it never hurts to try , just make sure u can undo it .. tho if the regkey contains "htc" somwhere it most def wont work

I have downloaded a utility for enabling rSAP profile on our phone - it did not help...I then disabled the rSAP and a miracle!!!
I managed to place 2 calls already. I hope on next connection with the car it will still work

what is this miracle program which lets you enable the rSAP? I need it too!!

youbrokeit said:
what is this miracle program which lets you enable the rSAP? I need it too!!
Click to expand...
Click to collapse
search this forum "rSAP"...but before you do a short update:
of course on next connection, nothing worked ...and I have updated to the new rom and did not install rSAP and I was able to obtain the same result...this means it has nothing to do with my previous success
this situation is driving me grazy already...I do not know why sometimes i can get it to work perfectly by just switching BT on and off.
today i have wasted many hours just turning it on and off trying to find the rule, working combination - so far it seems to work at random
and if I get it to work it works for the next call and the next...until I get out of the car. when I start the car again it does not work r-r-r...how can I take a "snapshot" of the phones state when it is working and somehow replicate this state every other time I am in the car?!!
please help me

try resetting ur phone , sometimes it wont pair with my bt headset nomatter what i do but a phone softreset fixes it

souljaboy said:
try resetting ur phone , sometimes it wont pair with my bt headset nomatter what i do but a phone softreset fixes it
Click to expand...
Click to collapse
a SR does indeed fix it, but only until next disconnect...when I came to the next day it is the same story again
I refuse to believe that this just a normal thing for WM (although having for the last couple of years only blackberries, I miss their stability and auto on/off function) ...even WM cannot be THAT glitchy

anyone?

I think I am onto something here:
if the BT is switched on after I start the car, everything works perfect!
the only inconvinience now is switching BT on/off for each jorney (especially annoying during short trips with short stops - to the local shop, post office etc)