Database Info

XDA2i How to turn off the Phone

Hi,
Please can you help, I have had problems with my XDA2i using Tomtom 3. In order for it to work properly I need to turn the phone off whilst maintaining the use of Bluetooth to connect to my Bluetooth GPS.
The question I have is how to turn off the phone whilst maintaining the bluetooth turned On. I know how to turn the phone off using Turn On Flight Mode the problem is this turns off everything, Bluetooth and all!
I have read a post that to turn off the phone I just press the Hang up button for 3 secs, This idea doesn't seem to do anything.
If I turn on the Flight mode then try to turn on the Bluetooth, it says I must turn off flight mode which in turn turns on the phone!
Can you help
Cheers
Blue

Can't answer your question other than 1) don't understand why your Tom Tom won't work with the phone on 2) holding the red "end" button for 3 seconds will only disconnect you from GPRS connection.

Your Tom Tom should work with a BT headset, BT GPS and the phone radio on all at once.
Check your set-up and you'll find it works.

Tom Tom 3
I have the same issue if my phone rings whilst using Tom Tom it will stop the navigation system and I have to reset the XDA...I have found that seting flight mode on and then switching it off actually doesn't renable the phone just wifi and bluetooth the phone switches itself on when you make a call..

I thought that was the case, My XDA2i software must be bugged at it re-enables the phone if I do that.
My old XDA2 worked a treat, I just turned on Flight Mode, then Turned it off and the Bluetooth worked and the phone stayed off. To turn the phone on I went into the phone and chose settings it then prompted me for a "do you want to turn the phone on" question.
My New XDA2i doesn't do that, I turn on flight mode, then turn it off and all 3 (wirelss, Bluetooth and Phone) come back on.
If I play around with the XDA2i I can manage to get the phone to stay off but it is problematic.
Any Help?
Cheers
Lee

Ok here is how to do it, ive just done it without having a problem.
1) Start Tomtom with it communicating to the Bluetooth GPS and Phone is on.
2) Whilst tomtom is running turn on flightmode (turning off all Wireless and Phone)
3) Go back into Tomtom and it should have lost its connection to BT you will see it hasn't disabled the GPS though!
4) Turn on BT in the Bluetooth Settings in the settings menu of the XDA2i
5) XDA2i will then pop up a message saying turn off flight mode first, try to close that popup and it will take several seconds whilst it closes the popup.
6) Hey presto the delay was caused by the XDA2i trying to turn on Wirelss with out the Phone.
7) You now have just wirelss on and not the phone.
Let me know if this works for you, it has for me each time.
Cheers
Lee

BIP on WIFI deconnection

Hi,
When I actavate the wifi on my SPV E650 (vox), and the phone goes in low power mode (screen goes black), after 10 secondes the WIFI disconnect itself (that's OK), but there is a BIP when it does it.
After even when the keyboard is locked, if I press a key the Wifi seems to wake up for a while, then disconnect again and BIP again.
Is there a way to
1) get rid of the BIP
2) avoid the WIFI to try to reconnect when the keyboard is locked ?
If I deactivate the WIFI completly, it stop beeping but then my wifi don't work anymore...

In the power mode of the wifi settings there is an option to have the phone not deactivating WIFI when the screen goes off. But then you have to manually put on / off your wifi.
Unfortunately WIFI drains a lot your battery...
Ka

Thanks that could do it.
Actually now I'm manually deactivating the WIFI unless I really want to use it.
But I'm upset that I can't get rid of the beep when the WIFI is deactivated.

HTC S710 Vox and WiFi connect problem

hello,
i have a wifi with wep ascii key at home ( with canyon router ) and have not a problem with connecting, but with new phone htc s710 vox i start wifi modul, phone ask me for a password. ok. after maybe one minute phone ask me again, because it show "incorrect password". no possibilities for connecting.
if i stop bluetooth, phone show connecting ( tower with circle ), but after 1 second tower symbol will hide and information about wifi on today screen is hide too.
if i stop bluetooth and gsm modul, wifi connect to AP without problem. and it no problem to start bluetooth and gsm modul again. but after stop wifi will be same problem like on start my question.
is it some solution for this bug or is it problem only with my phone (warranty)?
thank you for your ideas
mISHA

so i have a solution. i hope.
if somebody will have same problem, try to set wifi power mode to best performance.
just work without problem at home

Bluetooth problem

Hello,
I have a Blue Angel and suddenly I begun to have problems with turning on BT. If I turn on wi-fi I cannot start BT, only if I start it from comm manager and soft reset very fast, than the phone will boot with BT on, but than I cannot start wifi.
After some searching I saw that BT is linked with run_bttray process wich I dont find in start up, neither in windows dirrectory. My radio version is 1.13 on wm6.
Can anybody offer some solutions? Where should I check to see if bttray is present? How can I start it?

Bluetooth works only after Restart

Hey Guys,
i have a problem with my Samsung Omnia 7.
When my phone ist running and i want to activate bluetooth, the screen displays "searching" (in german "Suchen"). My phone wont find a device which is in the near and where i know, that i can connect normally.
I know that, because, when i turn bluetooth on and restart my phone, then after restart, i will find all the bluetooth devices in the near and i can connect for example with my laptop and play music from my phone on the laptop or hear the voice when im calling with someone.
But when i turn bluetooth off and after this on again, there is only the screen which diplasy "searching".
My bluetooth works only if after i turn bluetooth on before i restart my phone.
Sorry for my bad english , i hope you understand my problem.
Is there anybody with a same problem or anybody who can help me?

The HD2 has similiar problems with bluetooth and wifi together. However I'm not an Omnia 7 user.
Anyway, you can ask it in the Omnia 7 forum (which would be the correct one) or even better: Use the search tool and browse all existing bluetooth problems thread to see if someone has found a solution (There are plenty of it...). Thanks

thanks for your advice. after u told about the problem with bluetooth and wifi togehter, i just tested what happens if i activate wifi and bluetooth togehter and i was suprised to see that my bluetooth works. i can avtivate and deactivate and it just works in connection when wifi is "on". if i turn wifi off, bluetooth wont work anymore...
but thanks, so i have a workaround and can use it, i will search in thread with same problems, thanks!