Database Info

My JAMIN not Working??

Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me

Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?

mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you

You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.

Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)

wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device

First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks

Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all

Orange SPV C600 Application Unlock

Hi Peeps,
I have been researching many websites without any luck. I am new to Windows Mobile devices and looking for some assistance in Application Unlocking the C600/Tornado.
I have seen some posts about flashing it with the Imate ROM. The phone itself is sim unlocked however I am trying to install some third party applications and it is stating I don't have enough permissions.
I have tried various Registry editors but they won't install.
Can anyone help?
Edit:
I have tried using the HTC Unlocker. It states unable to open regedit.exe. I have also tried SDA_Applicationunlock.exe I get the message "Phone is not unlockable".
This is driving me crazy, can anyone help.
Cheers
Werdns

16 views and no replies, if anyone can provide any information that would be great.
Werdns

In archive three files.
The names begin with 1,2,3
In this order start all three

Many Thanks Alexx,
I believe I have the AKU2 update, will this still work?

Thanks so much. It worked a treat!!!!

100% working solution needed

unlocking spv c600
Hey guys
I have followed the above steps to unlock my phone, and I'm still gettting an "Invalid Sim card" error.
I have tried just about every unlocking app or method there is, and still no luck. I have a new SPV C600 which I got on an Orange contract about a year ago. And it's security locked so I can't edit the registry, and I can't install any certificates either.
And though I tried the 1, 2, 3 step method above, and tho it told me it was successfull on all 3 steps, my O2 sim card still doesn't work.
Waahhaaaa....
help please

i have bought TMobile SDA. Can we unlock with this ? If not can anyone tell me how can i unlock it myself..help needed urgently..thanks in advance

Alexx~ said:
In archive three files.
The names begin with 1,2,3
In this order start all three
Click to expand...
Click to collapse
THANKS; THIS WORK FOR ME 100%

Where can i find the archive?
hi guys (and girls)
i tried to find the archive to put the 1,2,3 but i realy can not find it.
is now running on the latest rom from orange, i realy like to un lock it.
sorry i am a newbie
pls help me
tnx
|Ger

spv c600 unlock
Hi Guys,
I've been trying to unlock my SPV C600 following the instructions mentioned above. However, in order to complete these 3 steps, seems that I need an additional application to open the file extension .cpf found on steps 1 and 3.
I was wondering if anyone could help me with addtional download or instructions to solve to my issue pleaaaaase.
Also, should I put a different simcard, orange simcard or leave without simcard while I run the application on the phone?
Sorry about these stupid questions.
Many thanks for your help.
Thanks for the file Alexx~
Fontanella

Please have a look at this link
http://karhoe.net/content/view/21/1
or
http://robertpeloschek.blogspot.com/2006/03/howto-application-unlock-your-windows.html
It is useful unlock your phone.

hmmm i have also tried almost every way of application unlocking on the internet
i have a SPV C600 and i cant open regedit.exe
these 3 applications havent worked for me unfortunately
any other ideas caus im all out and im on the brink of giving up
if someone could please pm me with a few suggestions i might have missed one
its getting late and i dont want to break my phone by firmware or fist...

Check my post it probably helps you http://forum.xda-developers.com/showthread.php?t=412139
See ya from Mexico

I've just application unlocked my Qtek 8310 using 3 steps.
Thanks.

chaqueun said:
Check my post it probably helps you http://forum.xda-developers.com/showthread.php?t=412139
See ya from Mexico
Click to expand...
Click to collapse
thank my freind,my SPV is now unlocked by this method

@Alexx~;
me i have got errors->unknown error-2147014795 in read operation with SPV-Developers services what is the hell is this?

working!
Thank you even old post!It help me to much!!!!!!!!!!!!!!!

plzzzzzz help me with my spv c600
GUYz MY PROBLEM IS HUGE. I AM STUCKED ON A THREE COLOUR SCREEN ON MY SPV C600 CEEL WHILE I WAS TRYING TO UPGRADE IT. THE ONLY ROM THAT SEEMS TO WORK , ONLY STOP AT 2% (WM5) DURING THE PROCESS. WAT SHLD I DO. I HAVE BEEN ON THIS FOR ABOUT 2WEEKS. PLZZZZZZ HEP [email protected] IS MA EMAIL

Seems like the same story over and over again... sigh.
You first must get access to the old OS again. As you have not succeeded in doing any upgrade yet, the old OS should still be there. Do a hard-reset:
1.) switch off
2.) press l+r softkey + keep pressed until a next step tells to release them
3.) switch on device
4.) wait for white screen with advice on hard-reset, release L+R softkeys
5.) press key for hard-reset (should be 0)
Device reboots to old OS.
When old OS is up you MUST(!) application unlock the device before you can do anything else. The Orange devices are especially resistant to allow this crucial first step. I have no such device, but key to success is that SDA Application unlock tells that your device is successfully unlocked.
Look for C600 Unlock to find dedicated instructions.
Mind that after the application Unlock you need also the CID Unlock and (if SIM locked) also the SIM Unlock. All is possible for free, so no need to spend money for that.

How to modify wifiwake to work with Raphael?

Hi,
My provider here in Japan (Softbank) uses an AP for our data plans. The password is unknown to the public. I need to get this AP working on my new Touch Pro.
Previously, others have exported AP settings without knowing the password from a previous phone which allowed the importation onto the Kaiser I had. I would like to know how this can be done again so we can get the Touch Pro working on the data plans as well.
Here is the link to the original thread where they placed the modified files:
http://forum.xda-developers.com/showthread.php?t=328362&page=2
I believe just the wifiwake.exe is device specific and needs to be modified a little. According to that thread this needs to be done:
Patching WIFIWake.exe;
01C760h "KAIS1300KAIS1300", 16 chars in UTF-16.
01C784h Pre-Unlock CID, 8 chars in UTF-16.
01C798h Pre-Unlock CID, 8 chars in UTF-16.
If anyone can do this for me, or advise me how it can be done and what software I could use. I would be happy to make a donation either to yourself and/or the forum.
Any help on this is greatly appreciated.
Thanks,

Please get your CID first.
If you have done HARD-SPL, you have to know the original CID.
Give your info.
Use mtty.exe
Cmd>getdevinfo
Cmd>info 2
RayB said:
Hi,
My provider here in Japan (Softbank) uses an AP for our data plans. The password is unknown to the public. I need to get this AP working on my new Touch Pro.
Click to expand...
Click to collapse

I have finished to get a worked patch file.
http://forum.xda-developers.com/showthread.php?p=3077154
s2k7 said:
Please get your CID first.
If you have done HARD-SPL, you have to know the original CID.
Give your info.
Use mtty.exe
Cmd>getdevinfo
Cmd>info 2
Click to expand...
Click to collapse

iam confusing Please help me ??

Hi guys
i am confusing about my Sapphier because i buy my mobile yesterday from Vodafone in uk and the sales man told me this phone work just with vodafone sim card , and by mistake i insert T-MOBILE sim card and itis work
every thing itis work "internet - 3G...etc
So its my phone lock or unlock ? and if its unlock , can i flash the ROM ?
MOBILE NUMBER:1.5
FIRMWARE : 1.5
BASEBAND:62.50S.20.17U_2.22.19.261
KERNAL:2.6.27-00393-G6607056 [email protected] #1
BUILD NUMBER : CRB43

any one please?

Find out what SPL you have. You can do that in fastboot mode while powering down your phone. And then press Home+End/Power to get it there. Write down the first lines in the application.

boy4ngage said:
Hi guys
i am confusing about my Sapphier because i buy my mobile yesterday from Vodafone in uk and the sales man told me this phone work just with vodafone sim card , and by mistake i insert T-MOBILE sim card and itis work
every thing itis work "internet - 3G...etc
So its my phone lock or unlock ? and if its unlock , can i flash the ROM ?
MOBILE NUMBER:1.5
FIRMWARE : 1.5
BASEBAND:62.50S.20.17U_2.22.19.261
KERNAL:2.6.27-00393-G6607056 [email protected] #1
BUILD NUMBER : CRB43
Click to expand...
Click to collapse
it is unlock as i have the same phone. you need to root it first then flash whatever you want. its so easy after rooting......... flash direst from sd card by using home+power button when phone is off as no need for all that adb push stuff. you can actually place the Rav1.1.1G.img straight to sd card without all the messing........ if you look at commands that all you doing anyway.............but using sdk tools. i use an external card reader to copy all files over, pop back in phone and do ma thing

Cheesebaron said:
Find out what SPL you have. You can do that in fastboot mode while powering down your phone. And then press Home+End/Power to get it there. Write down the first lines in the application.
Click to expand...
Click to collapse
thanx
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAPP10000)
RADIO 0-2.22.19.26I
APR 9 2009,23:30:40

shingers5 said:
it is unlock as i have the same phone. you need to root it first then flash whatever you want. its so easy after rooting......... flash direst from sd card by using home+power button when phone is off as no need for all that adb push stuff. you can actually place the Rav1.1.1G.img straight to sd card without all the messing........ if you look at commands that all you doing anyway.............but using sdk tools. i use an external card reader to copy all files over, pop back in phone and do ma thing
Click to expand...
Click to collapse
you are the best meat
can you send to me link for the step to rooting also if you have advice for me please tell me before i do the rooting

Look here: http://forum.xda-developers.com/showthread.php?t=517948 for Rooting.
Look here: http://forum.xda-developers.com/showthread.php?t=529019 for Flashing SPL to enable usage of third party roms.

boy4ngage said:
you are the best meat
can you send to me link for the step to rooting also if you have advice for me please tell me before i do the rooting
Click to expand...
Click to collapse
right this is the safest root method as it gives you recovery options
http://forum.xda-developers.com/showthread.php?t=530492
also check the wiki. do 1st 5 steps on wiki then follow link above. once thats done you ok

than x guys you help me allot

Nz & oz htc snapp unlock thread

okay, the lock on the htc snapp (MAPL) sold in NZ and OZ is unbreakable at the moment, i havn't been able to do mine on
NZ Telecom 6.1
and ive read of Australian users on
AUS Telstra 6.1
having the similar problems,
mine phone wont unlock via
SDA App unlock
MobileJaw wont install
and i dont have permissions to XML edit.
Please post here, if you have HARDSPL'd your NZ or OZ phone, or if you havnt so we can get some support going and hopefully work it out.

I would also like to HARD SPL these phones can anyone help us here
Model:MAPL130
Provider: Telecom NZ

You need to use QMAT to generate a Goldcard onto a MicroSD. You can then use the MicroSD card to bring the lock level to 0 and Flash the phone via Bootloader to the TMO Dash3G ROM and App unlock it from there to run JumpSPL. No time to write it up write now but thats how to do it.
You can use my Unbricking thread to learn how to Generate an HTC Maple Goldcard. Fun learning experience!
QMAT can be obtained here:
http://revskills.de/pages/download.html

ookba said:
You need to use QMAT to generate a Goldcard onto a MicroSD. You can then use the MicroSD card to bring the lock level to 0 and Flash the phone via Bootloader to the TMO Dash3G ROM and App unlock it from there to run JumpSPL. No time to write it up write now but thats how to do it.
You can use my Unbricking thread to learn how to Generate an HTC Maple Goldcard. Fun learning experience!
QMAT can be obtained here:
http://revskills.de/pages/download.html
Click to expand...
Click to collapse
cool ill give it a shot, ill post results later

I have a HTC Snap from Telstra that has WM6.5 so it had SPL 1.24 on it.
After searching around for a way to remove some of the application security that was enforced on the phone i thought id give this a shot.
Google for "unlock-the-security-on-the-samsung-jack" and you should see a link from 1800pocketpc.
Use the clearsecurity.cab that you get from that link and run it on the phone and everything is unlocked.
After installing you can uninstall as battery gets drained very quickly.
You can then use hardspl 1.19 and it works with no issues
Will try a custom rom later as its a company phone and i need to be able to enrol it and use Telstra APN's
Hope this helps someone

slaya said:
I have a HTC Snap from Telstra that has WM6.5 so it had SPL 1.24 on it.
After searching around for a way to remove some of the application security that was enforced on the phone i thought id give this a shot.
Google for "unlock-the-security-on-the-samsung-jack" and you should see a link from 1800pocketpc.
Use the clearsecurity.cab that you get from that link and run it on the phone and everything is unlocked.
After installing you can uninstall as battery gets drained very quickly.
You can then use hardspl 1.19 and it works with no issues
Will try a custom rom later as its a company phone and i need to be able to enrol it and use Telstra APN's
Hope this helps someone
Click to expand...
Click to collapse
Thank you, thank you, thank you!

slaya said:
I have a HTC Snap from Telstra that has WM6.5 so it had SPL 1.24 on it.
After searching around for a way to remove some of the application security that was enforced on the phone i thought id give this a shot.
Google for "unlock-the-security-on-the-samsung-jack" and you should see a link from 1800pocketpc.
Use the clearsecurity.cab that you get from that link and run it on the phone and everything is unlocked.
After installing you can uninstall as battery gets drained very quickly.
You can then use hardspl 1.19 and it works with no issues
Will try a custom rom later as its a company phone and i need to be able to enrol it and use Telstra APN's
Hope this helps someone
Click to expand...
Click to collapse
Ohh thanks alot! Was so worried that my new Htc Snap wasn't going to work .
For other users having the same problem, here is the keywords for the error that was occurring. sorry a problem has occurred with jumpspl.exe

Missing CAB
Hi guys,
Can anybody post the CAB file?
The link does not work anymore..
Thanks in advance!
Edit: Just found it and attaching it here. It worked like a charm! No need for SCM tool at all. Now finally I can edit policies regvalues as I want, SDA Unlock does not through "unlockable" error, checklock now says it is unlocked... life is good

ookba said:
You need to use QMAT to generate a Goldcard onto a MicroSD. You can then use the MicroSD card to bring the lock level to 0 and Flash the phone via Bootloader to the TMO Dash3G ROM and App unlock it from there to run JumpSPL. No time to write it up write now but thats how to do it.
You can use my Unbricking thread to learn how to Generate an HTC Maple Goldcard. Fun learning experience!
QMAT can be obtained here:
http://revskills.de/pages/download.html
Click to expand...
Click to collapse
I am trying to generate goldcard, but QMAT (PSAS now) requires to isntall rapienable.cab, which is not allowed

Try installing this app before Flashing HSPL
i have happily flashed 2 NZ Telecom Snaps this way
I found it on this site http://www.mobilejaw.com/articles/2009/09/removing-application-lock-on-windows-mobile-standard-devices/
Def