Alright, I know this has probably been covered some where, and I know that this is a "world wide site", and I know this is all going to sound stupid given the answer is in my own post, but a question:
I am really liking the look of this phone, and I want to get one (when ever it comes out), but in Australia, our largest HSDPA network is Telstra NextG, which is 850 band. Looking at the specifications for the machine (this site had everything well laid out):
http://www.gsmarena.com/htc_touch_pro-2413.php
It states the European/Asian version will be HSDPA 900/2100. So I am going to guess that I can not use it on the Next G network with this version of the phone. Correct?
Also, the site states that the Americas (US) version is 850/1900.
So, I assume I have to get a phone from the US to use it on Telstra's Next G. Is this correct, or is there some other quirk that I do not know (like some CDMA difference or something)?
Thank you for homouring me
Correct, the NextG network will not work on this phone at present. Also correct, it will work on the US version. Here's the nice part though...
One of our members was nice enough to leak a version of the new AT&T ROM for the upcoming Raphael in the US, and since the hardware is all the same, HOPEFULLY flashing with that ROM will enable the 850mhz HSDPA band you and I both need. I'll be testing this on a Raphael when it releases in Europe, and I'll have a post up very quickly in this section letting people know how it went. If it works, you can buy any version and flash it (only takes 5 mins) for it to work in AUS.
Edit: Don't listen to GSMArena, HTC lists this phone as quad-band although they say it's tri-band.
Cheers and Beers
Black93300ZX said:
Correct, the NextG network will not work on this phone at present. Also correct, it will work on the US version. Here's the nice part though...
One of our members was nice enough to leak a version of the new AT&T ROM for the upcoming Raphael in the US, and since the hardware is all the same, HOPEFULLY flashing with that ROM will enable the 850mhz HSDPA band you and I both need. I'll be testing this on a Raphael when it releases in Europe, and I'll have a post up very quickly in this section letting people know how it went. If it works, you can buy any version and flash it (only takes 5 mins) for it to work in AUS.
Edit: Don't listen to GSMArena, HTC lists this phone as quad-band although they say it's tri-band.
Click to expand...
Click to collapse
The above sounds good. I really do not want to go down the road of a Telstra locked phone (not that Telstra will release this one). I await your tests with anticipation.
Cheers and beers
Yeah, well, I figure if it doesn't work (hoping it doesn't brick it) I'll just resell it for like $25 less and it's not much of a loss for trying.
I don't know much about Australian telephone networks, but I've always wanted to go there and see what it feels like to be upside down all the time.
TheBundo said:
I don't know much about Australian telephone networks, but I've always wanted to go there and see what it feels like to be upside down all the time.
Click to expand...
Click to collapse
Haha, seems like one of the nicest vacation spots in the world. Can't wait to go there someday.
Here is a photo of the Australian system:
http://www.flickr.com/photos/jeffwerner/278050267/
The Australian networks arent too bad. We have a choice of frequencies here. Telstra have the 850mhz 3G band and Optus and Vodafone are each expanding their exisiting 2100 3G network using 900mhz which will be launched over the next few months. The good thing about Raphael is that it will work on the 2100 and 900 3G bands and given that Telstra's voice and data plans are ridiculous many of those who want to use data on it wont care about the absence of 850...this is good news. However if the device can be flashed to work for everyone...even better.
As for the photo of the Australian networks that was a network similar to what I built in Sydney in the early 80's. A large carrier paid me a small fortune to decommision it as it was making them look bad!!
I'm also in Australia and plan to get this phone from one of the UK stores as I can't wait for 3 odd months for it to be released here. Now I'm sure there might be a few aussies here who have ordered from online stores outside Aus. What I wanna know is if I might have to pay any import duty on my purchase? If I buy from expansys uk, the unit will cost me roughly AU$920, but with bank fees and shipping charges, I would have paid $1010. I know that import duties are applicable if the cost of the unit is $1000. So does this count for me as well?
I just want to avoid paying more that I should.
However, I need Next G
Thanks all for your input on this. I was pretty sure that the phone would not work on the NExt G nextwork if I bought one (from say an internet dealer in Sydney or Melbourne), but as you can see from my "location", I need Next G. There is not 3G nextwork in the Top End except Telstra Next G (Or at least none that cover all of Darwin and its area adequately. Anyway I don't knock Telstra too much).
Further to that, I work away a lot and once again, Next G is OK (note I only said OK) for outside of major cities, and Telstra GSM is good for most rural townships also.
Anyway, I suppose my upgrade will be to a TyTN II to replace my old phone, at least it has the 850 band that I need for Next G.
Cheers and beers
Black93300ZX said:
Edit: Don't listen to GSMArena, HTC lists this phone as quad-band although they say it's tri-band.
Click to expand...
Click to collapse
Not entirely true...see this post
merten3000 said:
Not entirely true...see this post
Click to expand...
Click to collapse
The Diamonds were listed as Tri-Band too, but now every Diamond is quad-band since they came out with the newer ROM. Same with the Touch Pro, some ROMs (apparently that nation's) don't support quad-band, but in time (or with a quick reflash) they will.
Black93300ZX said:
The Diamonds were listed as Tri-Band too, but now every Diamond is quad-band since they came out with the newer ROM. Same with the Touch Pro, some ROMs (apparently that nation's) don't support quad-band, but in time (or with a quick reflash) they will.
Click to expand...
Click to collapse
Thnx finally some clarification...
But still strange that our countries HTC would not enable that bandwith. They state it's a business phone. But business often means travelling arround the globe. Quadband would then be preffered above tri-band....
But black you know for sure the bandwith can be activated by just software? Some people say you need a different antenna. (I'm a noob in that area...).
Thnx anyway!
merten3000 said:
Thnx finally some clarification...
But still strange that our countries HTC would not enable that bandwith. They state it's a business phone. But business often means travelling arround the globe. Quadband would then be preffered above tri-band....
But black you know for sure the bandwith can be activated by just software? Some people say you need a different antenna. (I'm a noob in that area...).
Thnx anyway!
Click to expand...
Click to collapse
The GSM antennas are all in every Diamond, the problem is with the UMTS radio. To keep the Diamonds so small, HTC had to remove the American UMTS radio, making it so you can't use a European Diamond to get 3G in the US ever. Likewise, the American Diamond will only have the US bands of 3G (850 and 1900). As for the GSM bands, though, EVERY Diamond has the capability to be quad-band, so you'll at least get EDGE wherever you go. Hope this clears things up.
Black93300ZX said:
The GSM antennas are all in every Diamond, the problem is with the UMTS radio. To keep the Diamonds so small, HTC had to remove the American UMTS radio, making it so you can't use a European Diamond to get 3G in the US ever. Likewise, the American Diamond will only have the US bands of 3G (850 and 1900). As for the GSM bands, though, EVERY Diamond has the capability to be quad-band, so you'll at least get EDGE wherever you go. Hope this clears things up.
Click to expand...
Click to collapse
Thanks you really are the first one who makes sense!
Thanks again!
merten3000 said:
Thanks you really are the first one who makes sense!
Thanks again!
Click to expand...
Click to collapse
Just wondering if anyone had n update as to the effect of the new radio rom in the touch pro. I understand the US issue was different with a release of GSM only touch pros (Booo Hissss) but would realy like to confirm if we are able to reflash to expand on the UMTS frequencies here in Aus making the touch pro UMTS tri or quad band.
Thanks for all the info in this post too.
I'm wondering if someone has worked out how to get the extra band to work in Australia as well. I am on Next G and my brand new phone simply sucks right now and I'm hoping I don't have to go over to a different carrier when my contract is up. I kinda like Telstra Next G, dare I say it.
its_tricky83 said:
I'm wondering if someone has worked out how to get the extra band to work in Australia as well. I am on Next G and my brand new phone simply sucks right now and I'm hoping I don't have to go over to a different carrier when my contract is up. I kinda like Telstra Next G, dare I say it.
Click to expand...
Click to collapse
As far as I know it works fine with an ATT Fuze with a regular touch pro you'll never get NextG on the 850 band, it's a hardware limitation.
Related
will the new touch pro from devicewire in the uk work on at&t's 3g network? thanks
wordsworth03 said:
will the new touch pro from devicewire in the uk work on at&t's 3g network? thanks
Click to expand...
Click to collapse
No, 900/2100mhz UMTS, AT&T uses 850/1900mhz.
wordsworth03 said:
will the new touch pro from devicewire in the uk work on at&t's 3g network? thanks
Click to expand...
Click to collapse
Well, that's the million dollar question, isn't it? Many of us are waiting to find out the answer. The AT&T ROM which has already been released on this site should enable access to UMTS 850/1900 bands which AT&T uses. The question is does this phone have the hardware to support this or will the US version have different hardware to access these bands. The answer to this question should be revealed in the next day or two as UK versions of this phone start showing up on US doorsteps including mine.
great, thanks for the response...please keep us updated! i want to pull the trigger very badly on one of these and i have very little patience!
I know it sounds stupid but why go through the trouble of purposefully crippling the european version? I dunno it just sounds weird to me, and more like their deal with att ( att doesnt want tons of these being imported before they release their version ) is causing this lack of U.S. UMTS via firmware.
Well the Diamonds over there can't get UMTS because they don't have the 850/1900 UMTS radio, the hardware was removed to make it smaller. We're hoping the Raphael has the same hardware, but you never know if that's the case.
let's just hope they don't name it something stupid,I don't know how well the sugar trick would work on the surface of the Touch Pro to remove any stupid branding att puts on the phone. ATT manages to make HTC's sexy into slight trailer trash every time.
migsims said:
let's just hope they don't name it something stupid,I don't know how well the sugar trick would work on the surface of the Touch Pro to remove any stupid branding att puts on the phone. ATT manages to make HTC's sexy into slight trailer trash every time.
Click to expand...
Click to collapse
AT&T Fusion is what we're hearing.
I just spoke to HTC tech support, the guy said that there is a touch pro version in Hong Kong that works on the UMTS 850, which would mean that it would work on ATT 3G here in the US, he gave me a number for the HTC kiosk in Beijing (they have a tech support location there during the Olympics for HTC customers visiting) the number he gave me is 400-700-7011, its in china i haven't been able to get through. He also said there is a ROM upgrade for the Hong Kong version that would enable 3G on the 850 band. I am just as confused as I was before I called.
gatordent said:
I just spoke to HTC tech support, the guy said that there is a touch pro version in Hong Kong that works on the UMTS 850, which would mean that it would work on ATT 3G here in the US, he gave me a number for the HTC kiosk in Beijing (they have a tech support location there during the Olympics for HTC customers visiting) the number he gave me is 400-700-7011, its in china i haven't been able to get through. He also said there is a ROM upgrade for the Hong Kong version that would enable 3G on the 850 band. I am just as confused as I was before I called.
Click to expand...
Click to collapse
That's the 850 GSM, not UMTS. Yes, this has been covered with the Diamond, a ROM update enabled the 850mhz GSM band for it to be quad-band.
Black93300ZX said:
That's the 850 GSM, not UMTS. Yes, this has been covered with the Diamond, a ROM update enabled the 850mhz GSM band for it to be quad-band.
Click to expand...
Click to collapse
The tech made it sound like it was a different Hardware version, he may not know what he is talking about, but i was able to contact the people in China (through skype) but they were not helpful. She gave me the HTC Hong Kong number I'll try them later. Hopefully we can rule out the fact that there might be hardware differences.
gatordent said:
The tech made it sound like it was a different Hardware version, he may not know what he is talking about, but i was able to contact the people in China (through skype) but they were not helpful. She gave me the HTC Hong Kong number I'll try them later. Hopefully we can rule out the fact that there might be hardware differences.
Click to expand...
Click to collapse
Well if you can find anything with the hardware ID of RAPH110, I can personally guarantee it has the hardware to run on AT&T 3G. Other than that, we'll see within the next few days as people will be getting and testing RAPH100's with the AT&T ROM.
bersca said:
Well, that's the million dollar question, isn't it? Many of us are waiting to find out the answer. The AT&T ROM which has already been released on this site should enable access to UMTS 850/1900 bands which AT&T uses. The question is does this phone have the hardware to support this or will the US version have different hardware to access these bands. The answer to this question should be revealed in the next day or two as UK versions of this phone start showing up on US doorsteps including mine.
Click to expand...
Click to collapse
We are just in progress to buy the Raphael or tp wait for the Xperia. We are travelling to Europe and Asia,but live in the US. As a result we want the UMTS working on 850, 1900 and 2100. Can you figure out if this is a hardware issue or a ROM update. I tseems the Xperia can do it, but we dont like to wait much longer and would like to go with Raphael but the UMTS is a working issue....
[email protected] said:
We are just in progress to buy the Raphael or tp wait for the Xperia. We are travelling to Europe and Asia,but live in the US. As a result we want the UMTS working on 850, 1900 and 2100. Can you figure out if this is a hardware issue or a ROM update. I tseems the Xperia can do it, but we dont like to wait much longer and would like to go with Raphael but the UMTS is a working issue....
Click to expand...
Click to collapse
This has been said many times, AT THIS TIME, NO ONE CAN GUARANTEE. In the next few days it will be tested, keep an eye out on the forum.
Hey folks, I've had the TYTN II connected to ROGERS (in Canada) via 3G for about a year now without any difficulties. I've swapped the SIM card into my new Touch Pro and it's only registering as EDGE. I've tried setting up a 3G connection in properties and everything, but it STILL only recognizes edge for the most-part. I've seen a couple of occasions when it said "G" in the top bar, but mostly E (99% of the time)
Any ideas on if there is a configuration problem? Or what I should do next?
A software update should hopefully fix this problem; just awaiting the final release of hardspl
well i know you cant get 3g in america because of band frequencies being different but what is rogers on? the touch pro can only do 2100mhz band for UMTS
I thought the UMTS frequencies were the same fro all of North America. I could be thinking about gprs. I know that hardspl is soon to be released from what i've been reading so we will know soon enough :-D
UMTS 850 and 1900 are available in the band selection screen HOWEVER the current stock radio and ROM combination doesnt work with it.
There IS a radio update around which has a minor update to the version number and protocol so im gonna guess it MAY help with this. The radio was bundled along with the cingular test update posted earlier this month.
Not recommended to update it yet though...wait til HardSPL is out so nothing dies
thanks
Thanks guys -- Do you think I should wait before I sell this Raphael to make sure its NOT compatible with the North American network?
I find it hard to believe that it would not be globally compatible with 3G networks around the world. Hopefully it just needs a ROM update (either radio/OS) to make it start working in 3g in North America
MMac said:
Thanks guys -- Do you think I should wait before I sell this Raphael to make sure its NOT compatible with the North American network?
I find it hard to believe that it would not be globally compatible with 3G networks around the world. Hopefully it just needs a ROM update (either radio/OS) to make it start working in 3g in North America
Click to expand...
Click to collapse
Wait, dont jump ship so quickly
Considering there are already TWO RUUs out ther for AT&T/Cingular its a pretty good bet an update will solve it
Wouldn't the world be a better place if there weren't so many different 3G frequencies?
Smaniac said:
Wouldn't the world be a better place if there weren't so many different 3G frequencies?
Click to expand...
Click to collapse
Yes it definitely would! When is HardSPL due out for this phone?
MMac said:
Yes it definitely would! When is HardSPL due out for this phone?
Click to expand...
Click to collapse
Check the forum section under "Raphael ROM Development", there's a thread.
Is the HTC Touch Pro able to work on U.S 3G band , if not is there a radio patch that will activate the U.S band on the device. Please help.
This is a very hot topic on this forum but so far from what i've been able to see none of the radios have enabled 3G. This is not to say that 3G isn't supported by the hardware although its looking pretty grim. It appears that the ELITE team is working on this since they just released Hardspl
Bxsteez said:
This is a very hot topic on this forum but so far from what i've been able to see none of the radios have enabled 3G. This is not to say that 3G isn't supported by the hardware although its looking pretty grim. It appears that the ELITE team is working on this since they just released Hardspl
Click to expand...
Click to collapse
We shall see what happens, although the bands are available in the "band" settings tab so it MAY be a radio issue.
Bit early to know yet, as there is only one user here so far who has hold of an AT&T Fuze (RAPH11000) we dont have a huge ammount of detail yet.
Both the newer 1.02.25.31 and 1.02.25.19 radios seem to have similar protocols (same QCT_BOOT and HTC_BOOT), it would be good if any user could flash the (apparently) older 1.02.25.11 radio and see if it does anything?
I really wish i could help out on this 3G front but no 3G in my area...
I can help...
mrvanx said:
...Both the newer 1.02.25.31 and 1.02.25.19 radios seem to have similar protocols (same QCT_BOOT and HTC_BOOT), it would be good if any user could flash the (apparently) older 1.02.25.11 radio and see if it does anything?
Click to expand...
Click to collapse
I have the 1.02.25.19 radio here in Chicago. I know I have good 3G coverage from my TyTN II that I had previously. But why would you think the OLDER radio (1.02.25.11) would have U.S. 3G? ...jus curious.
T
E
C
I've installed the radio 1.02.25.11 and no luck with 3G in US ATT. only edge support.
Radios
I tried all the radios listed on the wiki too. None of them worked with 3G.
technillion said:
I have the 1.02.25.19 radio here in Chicago. I know I have good 3G coverage from my TyTN II that I had previously. But why would you think the OLDER radio (1.02.25.11) would have U.S. 3G? ...jus curious.
T
E
C
Click to expand...
Click to collapse
Its bundled with the AT&T ROM which is currently on the AT&T Fuze devices people are testing.
Higher radio version number doesnt necessarily mean a better one, as veterans of the Hermes will verify
The overseas Touch Pro cannot get 3G in the US. Just like the Diamond, the Touch Pro from overseas (RAPH100) does not have a WCDMA 850 radio.
Flash all the radios you guys want... it's not going to get you 3G on the 850 band. You'll have to wait for the US version/ATT Fuze if you're in the US and want 3G data.
Anyone know when AT&T sould release US version/ATT Fuze?
stpete111 said:
The overseas Touch Pro cannot get 3G in the US. Just like the Diamond, the Touch Pro from overseas (RAPH100) does not have a WCDMA 850 radio.
Flash all the radios you guys want... it's not going to get you 3G on the 850 band. You'll have to wait for the US version/ATT Fuze if you're in the US and want 3G data.
Click to expand...
Click to collapse
Until we have tested newer ROMs and radios that statement is pure speculation. MANY devices have had missing bands and etc...but have had them unlocked in ROM and Radio updates so it is too early to be writing off 3G support yet.
I have a TouchPro coming tomorrow. I called HTC today and (although I have about as much confidence in this as the paper I wrote this on) I was told by a lower level tech (I think he knew what I was talking about) that a "software" upgrade would allow for the European 3G enabled device to work in the US for 3G
... I sure hope so since I forked out the cash today
The Treo 750 didn't even start out 3G capable at all and was made 3G able with a ROM upgrade
Hoping
Hardware
Maybe a very stupid question, but what about openning up an eu version to see if the quad radio hardware is there? I would assume the radio chipset would be labeled and numbered so that we would know once and for all.
jcrompton said:
I have a TouchPro coming tomorrow. I called HTC today and (although I have about as much confidence in this as the paper I wrote this on) I was told by a lower level tech (I think he knew what I was talking about) that a "software" upgrade would allow for the European 3G enabled device to work in the US for 3G
... I sure hope so since I forked out the cash today
The Treo 750 didn't even start out 3G capable at all and was made 3G able with a ROM upgrade
Hoping
Click to expand...
Click to collapse
I sure hope that the HTC tech guy knew what he was talking about! Im want to know before 9/17 so i can either pre order the HTC dream with t-mo (current provider) or switch over to AT&T so i can (hopefully) use 3G with my touch pro
Don't take this the wrong way...
ausbj said:
I tried all the radios listed on the wiki too. None of them worked with 3G.
Click to expand...
Click to collapse
...but can we ASSUME you DO in fact KNOW you have 3G coverage in the U.S. area(s) you tested these ROMs?
Not trying to upset or belittle your efforts...just had to ask.
T
E
C
erikjonpeterson said:
Maybe a very stupid question, but what about openning up an eu version to see if the quad radio hardware is there? I would assume the radio chipset would be labeled and numbered so that we would know once and for all.
Click to expand...
Click to collapse
I thought about this but cracking open a 900 dollar device and completely voiding the warranty really isn't worth it. If someone can get schematic from HTC which i doubt we could see if the hardware is installed.
stpete111 said:
The overseas Touch Pro cannot get 3G in the US. Just like the Diamond, the Touch Pro from overseas (RAPH100) does not have a WCDMA 850 radio.
Flash all the radios you guys want... it's not going to get you 3G on the 850 band. You'll have to wait for the US version/ATT Fuze if you're in the US and want 3G data.
Click to expand...
Click to collapse
I believe there is an asian hardware version, this is what the HTC techs keep mentioning that might have the 850 3G radio.
I have a case into HTC support asking them to answer the question for me around if the radio is hardware capable of 3G in the US and explained what bands I was talking about and that it was in the software to enable those. I Posed the question as if I was unhappy that I was selecting these bands and it wasnt working to try to get an answer out of them will report back when I am answered one way or another.
mallman said:
I have a case into HTC support asking them to answer the question for me around if the radio is hardware capable of 3G in the US and explained what bands I was talking about and that it was in the software to enable those. I Posed the question as if I was unhappy that I was selecting these bands and it wasnt working to try to get an answer out of them will report back when I am answered one way or another.
Click to expand...
Click to collapse
Just so you know - I sent a similar email to them regarding the 850 band on the Diamond and I was sent a very nice response informing me that the phone I purchased was not intended for the US and did not have the hardware capability to be used on ATT in the US. Low and behold the xda developers made the 850 band work. Now HTC offers a rom upgrade opening the 850 band they said was not in phone. Unfortunately the response you get will not be the definitive answer.
mrvanx said:
Until we have tested newer ROMs and radios that statement is pure speculation. MANY devices have had missing bands and etc...but have had them unlocked in ROM and Radio updates so it is too early to be writing off 3G support yet.
Click to expand...
Click to collapse
I understand yours and others' reasons for not believing me or assuming it's speculation. All I can say is there will be a lot of effort put forth for no reason, just like with the DIAM100, only to confim that the hardware everyone is trying to unlock isn't even there. If the efforts put forth do nothing more than prove the above to be true, then at the very least people can rest more easily with full confirmation.
Can remove simlock from HTC Dream and from any other HTC device.
This service is not free.
You will get unlock code in 5 minutes to 72 hours.
It will costs 50$ = 34EUR = 27GBP by donation to xda-developers.com - http://forum.xda-developers.com/donations.php
Please send me a Private Message for details.
P.S. you do not need to reflash, disassembly, hard reset your device!
How is this better then just asking T-Mobile for the unlock code?
I believe they will only unlock it after 6 months of service
Chryslerq said:
I believe they will only unlock it after 6 months of service
Click to expand...
Click to collapse
90 days... But with the ETF, it's not like you're going to buy from T-Mobile then cancel and use it elsewhere after unlocking it through this guy. It's much easier to buy it off of a current T-Mobile subscriber if you plan on using it with another network.
Black93300ZX said:
90 days... But with the ETF, it's not like you're going to buy from T-Mobile then cancel and use it elsewhere after unlocking it through this guy. It's much easier to buy it off of a current T-Mobile subscriber if you plan on using it with another network.
Click to expand...
Click to collapse
you can just buy it from somewhere else. e.g. eBay and you might want to use it on other carriers. or you might just want to have an unlocked phone in case you travel and put different sim card on it.
sumitescp said:
you can just buy it from somewhere else. e.g. eBay and you might want to use it on other carriers. or you might just want to have an unlocked phone in case you travel and put different sim card on it.
Click to expand...
Click to collapse
Right, I understand the reason for having an unlocked phone... I don't think I'd pay that much for an unlock, but whatevs.
It seems like the XDA Dev team will probably have a way to unlock it in a couple weeks anyway especially if the OS is open.
dagentooboy said:
It seems like the XDA Dev team will probably have a way to unlock it in a couple weeks anyway especially if the OS is open.
Click to expand...
Click to collapse
You have to remember, it's only on T-Mobile in the US for now... I don't know if I should expect the developers of SIM unlocks (olipro/cmonex have done most of the work in that department) to get their hands on one... Maybe they'll grab one just for development, but for all we know their only plans could be to stay with the Touch Diamond/Pro/HD.
I dunno. We still don't really know how "open" the Android OS is yet. Although the kernel is open and freely available, it handles low-level hardware functions. SIM functions seem to be handled higher up in the Android stack and not all the Android source code has been released yet. Unless I'm missing something, it's a wait-and-see situation as far as SIM unlocking goes.
Even if I were to want an unlocked G1 (which I don't) I'd be wary of shelling out $50 for an unlocker to a phone that hasn't been released yet. And honestly, tmo's unlocking policy is very liberal as it is.
i am not a t-mobile customer, but the rest of my family is. i buy t-mobile phones all the time and i get the unlock code no problems. i'm not sure on if they are gonna give the unlock code right away, but if not i can always get the unlock code through my family. i hope we get a free unlocker before i get around to getting the phone
i work for t-mobile UK and on a contract you only have to have the phone for a month then you can buy an unlock code for £15
so you save yourself alot of money doing it via T-mobile UK plus they now issue most unlock codes on the spot unlike their old 28days in the post way
T-Mobile USA's policy is one, free unlock code every 90 days.
And I don't understand why you'd care about SIM-unlocking it, as the US version is really only good on T-Mobile's 3G network. T-Mobile uses different 3G frequencies than AT&T and the rest of the world. As I understood it, the European version will have a different radio set inside. I'd like to hope I'm wrong, but I understood that to be the case.
beartard said:
T-Mobile USA's policy is one, free unlock code every 90 days.
And I don't understand why you'd care about SIM-unlocking it, as the US version is really only good on T-Mobile's 3G network. T-Mobile uses different 3G frequencies than AT&T and the rest of the world. As I understood it, the European version will have a different radio set inside. I'd like to hope I'm wrong, but I understood that to be the case.
Click to expand...
Click to collapse
actually i think the G1 could be used anywhere
http://www.htc.com/www/product/g1/specification.html
850/900/1700/1800/1900/2100 MHz
hex-band phone
i believe 900/1800 is eu band
and
850/1900 is at&t usa
warwolfx0 said:
actually i think the G1 could be used anywhere
http://www.htc.com/www/product/g1/specification.html
850/900/1700/1800/1900/2100 MHz
hex-band phone
i believe 900/1800 is eu band
and
850/1900 is at&t usa
Click to expand...
Click to collapse
You're confusing GSM frequencies with 3G frequencies. No phone maker yet has made a phone containing all the GSM frequencies, all the 3G frequencies, *and* the new tmo USA 3G frequencies. You can use the phone anywhere, but the 3G data would be crippled on anything but tmo-USA...and even tmo has said that the phone would pretty much suck without 3G.
ok you may be right about the frequencies
but the spec dose say that
HSDPA/WCDMA:
Europe: 2100 MHz
so it may not work with at&t 3g
but it might work in EU on 3g
Again, that's not what I'm hearing. The G1 in the US is configured for download on tmo's 1700MHz spectrum and upload only on 2100MHz. If I recall correctly, Europe does it all on 2100. That's the part I hope I'm wrong on, but just having "2100" on it doesn't mean it's configured for the particular part of the band that the Europhones use.
Chryslerq said:
I believe they will only unlock it after 6 months of service
Click to expand...
Click to collapse
90 days of continued satisfactory service will do.
what you all forget is that he is doing it non profit.
all the time he has been doing these unlocks, its probably helped a lot to the upkeep of the site.
beartard said:
Again, that's not what I'm hearing. The G1 in the US is configured for download on tmo's 1700MHz spectrum and upload only on 2100MHz. If I recall correctly, Europe does it all on 2100. That's the part I hope I'm wrong on, but just having "2100" on it doesn't mean it's configured for the particular part of the band that the Europhones use.
Click to expand...
Click to collapse
WOW! that would suck if that was the case- i think i will wait until someone else over here in Australia has tried one first
beartard said:
Again, that's not what I'm hearing. The G1 in the US is configured for download on tmo's 1700MHz spectrum and upload only on 2100MHz. If I recall correctly, Europe does it all on 2100. That's the part I hope I'm wrong on, but just having "2100" on it doesn't mean it's configured for the particular part of the band that the Europhones use.
Click to expand...
Click to collapse
Euro/Asia 3G (WCDMA Band I) uses 1900 for UL and 2100 for DL while T-Mobile AWS (WCDMA Band IV) uses 1700 for UL and 2100 for DL. However, WCDMA Band I was called UMTS 2100 therefore the confusion.
BTW the T-Mobile G1 is a dual-band HSDPA phone (T-Mobile AWS and UMTS 2100)
Hi guys, I recently acquired an HTC Wizard, I unlocked it and flashed a custom rom and I really like the phone but I'm looking to upgrade. The phones I've been looking at are the Dream, Kaiser and the Fuze. I've read the reviews on the G1 and it looks good but I'm not sure I'm ready to give up windows mobile (office is handy for work). But since I hear such good things, hows it compare to the others? Is the Fuze really worth me shelling out more cash over the Kaiser (about $150-$200 on ebay)? I'm also wondering if there are any other HTC models that offer everything I want without seriously breaking the bank. It needs to have mp3, video, net, keyboard, GPS, 3g, wifi, tetherable, touchscreen and needs to be unlockable or T-mobile based. Basically just looking for some advice on the best buy for my buck. Even if it's not necessarily an HTC (hope I don't get flamed for this =P). Also one more quick question, if I'm currently on T-mobile with the non 3g wizard and I pop my sim into a 3g phone, it will work at 3g speeds without me needing to do anything (provided coverage is in my area) ? Thanks in advance.
I miss my Fuze. I ended up returning it to get a Xperia, and I regret it, due to the Xperia's subpar keyboard.
On the other hand, the Touch Pro 2 will be out soon in the US (as the HTC Fortress on AT&T at an indeterminate date and the T-Mobile Wing II in July), and that should be everything the Fuze is and more (thinner, better battery life, larger and higher res screen, etc). I'd wait for that.
As for the sim swap question, yes, it should work, assuming the phone you pop your T-Mobile sim in supports 3G at 850MHz, as that's the only frequency T-Mobile uses for 3G (as opposed to AT&T, which uses 850 and 1900 depending on area). If you use a Euro phone, expect it to only work in 1900MHz areas in the US if at all. Phones actually marketed for the US will support both 850 and 1900 bands, which means you won't have a problem.
Thanks for the info. Any idea on the cost of the touch pro 2? I wasn't really looking to break the bank but I am intrigued.
Snakebear420 said:
Thanks for the info. Any idea on the cost of the touch pro 2? I wasn't really looking to break the bank but I am intrigued.
Click to expand...
Click to collapse
Welcome to the forum
Depending on your conuntry the price varies
Have a look on expansys to ha an idea
$600-$800USD
That's without a contract, of course. AT&T and T-Mobile should both have the Touch Pro 2 for $150-300 depending on where you order it with plans, if my guess is accurate.
Yea just checked out a video on it and it looks really nice, I'm currently on a prepaid month to month thingy with t-mobile but if I can score this phone for $200 or so with a new contract I might have too. However for the time being I might have to go pick up a Kaiser, they are half the price of the fuze used and although not as sexy still do everything I'm looking for.
Doesn't T-mobile use 1700mhz for 3g and 850 for edge/gprs? From what I've been reading the kaiser wont do 3g on T-mobile.
Snakebear420 said:
Doesn't T-mobile use 1700mhz for 3g and 850 for edge/gprs? From what I've been reading the kaiser wont do 3g on T-mobile.
Click to expand...
Click to collapse
Tmob uses 1700 & 2100 fro 3g (must have both)! Kaeser will not do tmob 3g!
Tmob edge uses 850...
Here's the TP2 new owner excitement forum section:
http://forum.xda-developers.com/forumdisplay.php?f=488