Related
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
I have the same problem.
Any solution? Thanks
firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
not yet.
jose
Reboot the PPC the check..I am using Jabra 8010 without any problems
Thanks for your suggestion~
But I reboot many many times~
But still fail~
Same problem here
Headset = Bluetrek G2
I can answer calls with it, but ppl can't hear me
hs 820 ,same problem
i have bt8oo and it works fine , any problem .
firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
Also,this problem happen in i-tech R35d
All, I had problems with every WM6 rom, varying in seriousness. However, this one meant you can't use it at all (Blutrek G2). So I bit the bullet and bought a HBH-PV700 fo 19.99ukp. Have had no problems since.
Bluetooth problem
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
The Bluetooth needs serious work
Hey ,
I've been using Nokia BH-900 headset and the vioce quialty etc is fine the only problem i am facing is that every few hours the connection just drops and i have to reconnect the bluetooth headset. Also BTGPS is not just working for tomtom or co pilot.
Any suggestions on how it would be possible to use one of the older bluetooth stacks from the original roms would be a great help.
Thanks
We have two families of wm6 roms: universal specific (Indra, Helmi, Jwright, Pdaviet up tu 08) and Athena derived (DarkForce and latest Pdaviet). Bluetooth on them share the same problem present in aku1.x original universal rom: after a random number of houres it turns off and up to now we don't know why?
Plantronics Discovery™ 640 - the problem is the same.
josedias said:
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
Click to expand...
Click to collapse
same problem with all wm6
bluetooth and probs
well hope there is some serious discussion going on in the big wigs for the bluetooth stacks. All of you are using lots of energy in between the 2 stacks of Microsoft and Widdcomm. Personally I prefer widdcomm but please get atleast one of them working for sure with everything
BTW the nokia headsets are working fine with all the WM6 versions I have used. Only the BT goes off after sometime with the blue light still flashing and then even the nokia cant do much.
Any help is worth a million
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
beginner said:
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
Click to expand...
Click to collapse
Isn't that due to the fact BT switches off when the uni switches itself on with incomming calls comming out of hibernation
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
Hi All,
I just had a brand new Car with Bluetooth. (Citroen C4 Grande Picasso)
With this Bluetooth I should have the abbility to to connect, answer, and scroll trough the contacts, of my phone. I'm using a Wizard G3 with WM6 (Dutch) IPL/ SPL 3.08 and Radio: 1.08. (Radio will be updated soon)
Probelm is: stuff is not working! I can connect the phone to the car with Bluetooth and it is recognizing it. When I make a call or one comes in, the Car sees it and mutes the audio. But that's all. I do not hear anything and I can't be heard. Also the button (on the steering wheel) for contacts doesn't work; meaning: It says: there are no contacts.
Who experienced the same pproblems and more important who solved these?
Hi Jedeve,
I have the same problem with the same car. It worked for me when I first started TT and then automatically my bluetooth GPS mouse was connected and all was working fine. Strnage but true. It looks like if a channel is set open when connecting to the bluetooth GPS mouse and stay open so evrything is working. I also have looked into registry setting son bluetooth if I can find differences by using diff but no strange differences where found.
I also talked to the Citroen dealer and they told that it might be possible that new telephones with the newest software are not able to work correctly with the carkit.
I have a Wizard (I think a G3) with Octavoi 9.2 on it, IPL/ SPL 3.08 and Radio: 2.71.11.
Hi,
same car and same problem here.
It seems worked with WM5 and problem showed after upgrading to WM6.
Calling/answering from car controls ends with total silence most times.
I've noticed that if a call is answered from phone it works most times.
Also car phonebook seems support only latin characters and any contacts with non-latin ones(cyrillic in my case) do not appear on car.
Would appreciate any suggestions/solution to above problems.
Hi,
I have same problem, with same car! with TNT wm6 Roms!
With new TNT 6.1 did not try yet...
Now I have Slim wm6.1 ROM and no problem! With NTS wm6 rom not problem too... works fine!
Hi There,
I have a HTC Cruise (dutch) and a Parrot 3200 LS-Color bluetooth carkit.
My carkit sees my HTC and I can sync my address book but when I receive a call ore when I want to call it doesn’t work right. I have to put the telephone to my ear again. The speakers en mic in my car don’t work.
Can any one help?
Thanks,
marco
update your carkit
Are you sure that you are on the best firmware for your car kit?
I have a diffrent parrot car kit (mk6000), and all my pb was solved by: going to the last parrot firmware, and after updating my phone to WM6.1 (not sure that this second is necessary or not)
Houms
I have a Parrot CK 3100
Version 4.16
I have also HTC TC with WM6 original
Every think work fine
You can try the jetware bluetooth extension.
http://www.jetwaremobile.com/
It solved some problems with my parrot ck300 evolution.
\\Yoshi
My Parrot works fine with Polaris
Parrot 3100 working fine with Polaris here too.
I had posted my experiences with the new firmware update here:
http://www.parrot.com/forums/usa/viewtopic.php?id=1487
Hope that this helps
T
imo the parrot with the color screen is a waist of money, ck3100 is also more supported ! My polaris works flawlessy with my ck3100.
My Polaris works near fine with the CK3100, except the disturbing phantom call when your last call was not picked up...
The other minor problem is that the different numbers of one contact are shown separated (/H /W /M...) Does anybody know if it possible to show all together?
Parrot have a 4.17 update out.Try flashing your ck3100.
Canaan said:
Parrot have a 4.17 update out.Try flashing your ck3100.
Click to expand...
Click to collapse
Already flashed, but no changes.
grouchomrx said:
My Polaris works near fine with the CK3100, except the disturbing phantom call when your last call was not picked up...
The other minor problem is that the different numbers of one contact are shown separated (/H /W /M...) Does anybody know if it possible to show all together?
Click to expand...
Click to collapse
There is a prog on Parrot's website the creates a vCard of all your contacts in outlook this file is then sent to the CK3100 from your phone and all of you contacts are saved in the bluetooth kit.
I don't think the phone auto syncs these contacts though
JJ
Hi Guys,
I don't want to be rude, but the thread starter asks for a solution to his problem not a list of parrots which do work with the touch cruise. Not really helpful according to me :s.
Futhermore, I am also having a lot of problems with the Touch Cruise with the Parrot 3200LS Color. I installed the jetware bluetooth extension, which solved 99% of my problems.
The 1% left is disconnecting a phone call. If I push the red button on the Parrot device, the call is not disconnected. I have to push the red button on my phone to end the call, but still the 3200LS thinks the call is still going on. I have to pull the plug to reset the 3200 LS. I already flashed the parrot with the latest firmware.
Anyone any useful pointers?
Parrot and TC
Hi there!
I don't know about you guys, but for me it's simple, for HTC touch, and for TC with my parrot CK v3.13 here's what i do:
- to be shore, you reset your parrot (red + green buttons, then you hear "please pair device", and only with first pairing),
- turn on your TC's BT, go to settings/BT, Add new device (Mode - visible), and when parrot asks for code, it's 1234, as i recall.
- now you are paired, and when you enter in your car only thing you have to do is to turn on TC's BT, pairing will be authomatic.
this works for me, without any problems...
Hope this helps
Bye
Problems with the HTC and the Parrot sync.
I have an HTC polaris but I cant sync with the Parrot 3100, because allways says that the code or the connection fail. anyone can Help me to sync this 2 ???
Thanks
Portugal HTC user!!!
Well, this is not really a question or problem. But just a headsup that the Diamond works just fine with my Nokia CK-7W.
However it would also be nice to hear from you guys (and girls) as well, since I can't imagine I'm the only one with succes!
You might wonder "Why the hell do you post this?!". Well, that's simple because when I wanted to find out whether that Nokia carkit would work together with the Diamond I coulnd't find anything.
And since my experiences with Nokia carkits and HTC phones weren't all that good (read: BAD, lots of echo and weird connection problems) I was pretty anxious to give this a try.
After testing it on another CK-7W, which was already built in a car, I figured it worked perfectly so I took the plunge and got one for my car.
(Before you ask, why no parrot or other brand? I was able to get my hands on this one really cheap.)
The only problem I got was the first time I wanted to pair the device. Every time after entering the 4 digit passcode I got a message saying the passcode was incorrect. Instantly, not even trying to connect. After leaving it all alone for 10-15 minutes and I tried to connect again it suddenly worked without any problems. And it's still working with no issues at all.
ROM I use:
SWIFTBL WWE DIAMOND ROM V7.5
OS Version: CE 5.2.20755 (Build 20755 AKU 1.4.0)
Base ROM Version: 1.93.405.1 UK WWE
So.. more succes stories here? Or problems?
Hi
I have the same setup, Nokia CK-7W in my volvo s60 connected to my MDA Compact IV running swiftbldade 7.5.
It all works perfect.
I even have MS Voice command setup with it and it annonuces incoming callers and messages perfectly and voice dialling works perfect as well.
Call quality is very good as well.
Shaks
Hey - I've got my CK-7W working fine too, except I'd like to also enable wireless stereo... but the option doesn't seem to exist... I bought the CK-7W off a friend, and he was able to use wireless stereo, but I cn't - has anyone else had any success...?
Relly something I want for using TomTom, etc...
Hi i have CK-7W car kit and I am having problems getting my Diamond to pair can you please advise how you guys paired your ones?
Can't say anything more than I just used the normal way to pair, go to bluetooth settings, search for device and select the carkit + enter correct passcode.
I did however have some problems in the beginning. It would find the carkit but after entering the passcode it said pairing failed.
But when I tried later again it went without a problem, and it paired everytime without a problem ever since.
I dont think the ck-7w supports stereo audio. There are however apps that can route the audio over the carkit. BTAudio is one called if I remember correctly. That way you can have the tomtom over the carkit, but quality isn't that good really.
And some say that using that audio routing also gives 'problems' sometimes, as in it sometimes seems like there is audio (e.g. the car radio is muted) but you don't hear anything for a few secs. So that can be quite annoying.
hmmm??? My diamond wont even pick up the car kit during the search!
I had some problems pairing in the first place...
Don't try to search for the car-kit using the phone, just have your Diamond on BT visible to others, and the car-kit will try to connect automatically... I think you might need to hold the button on the car-kit down for like 10 seconds for it to search, but definately let the kit find the phone, not the other way around...
I fitted one of these to my brother in law's car the other day. Tested it with my diamond, but i expected it to be cross compatible.
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Hi Y'all,
I am using my Diamond with the nokia CK-7W and it works fine as well. Paired up without much fuss....
Riel said:
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Click to expand...
Click to collapse
Eh.. none? I find the quality better compared to my old ck3300 parrot carkit. However, this one doesnt have a small lcd display or something. Not that I missed the lcd screen though, but sure was a nice feature.
Best thing about the parrot was that it's possible to put a new firmware on it. Could make them a little bit more 'future-proof'.
Nokia CK-7W with HTC Touch Diamond2, VITO VoiceDialer
Pairing the device was easy. In coming calls are working. Push on the carkit button and I can answer the call.
The problem that I have is that I can't do a voice call. If I push on the carkit button nothing happens. I would have expected that the VoiceDialer app would be started and I could make a voice call. The VoiceDialer app works without bluetooth.
Has anyone an idea how I get voice dialing working?
Remark:
With my pervious cell phone Motorola L6 was this possible. Pushed on the carkitt button, wait on the beep, say the name, when recognized it repeats the name and the number was dialed by the phone.