everything runs good untill jump spl wants to open then it just leaves the phone in a blank black screen i think jump spl doesn't work on my pc
i did it both ways and nothing else works
can somebody help
Related
Hi i recently got this htc p3600 with broken touchscreen, the lcd is fine but the touchscreen have some cracks in it.
I don't know anything about what versions of roms etc is in it. All i know is that windows mobile's in it.
When i start up the phone i get a green windows mobile screen witch says that i should click anywhere on the screen to calibrate the screen. I do htat because i can't do anything else and then this X shows up and i am suopposed to click on it in order to calibrate the screen.
I'm doing this, first in the middle then it moves to each corner but when i clicked all the corners i goes back to the middle nad starts over agaiN!!
I've clinged this stupid X for like 15 minutes now but nothing seems to happen!! Whats the problem? Can it be locked to the sim-card i've inserted??? Please help me!
guess you will have to replace the digitizer.othewise, you may try connect it with active sync and delete the call program from auto run - hopefully theres some default cal data in it.
Don't really understand what you're saying, im new to this phone and i got i broken. ALready ordered a digitizer but i want to test it out now. Tried to add a calibration value to the registry but i cant do anything because its locked.
So i think enableing rapi will o the trick but i cant start the phone to start the enable rapi program :/:/
Is there any other way to bypass this screen? Like killing the process with some taskmanager??
go search for remotecalibration.exe
so I am not sure what I am doing wrong here, for some reason all the 6.1 rom's that I DLed that are supposed to work on the Tilt do not install, it goes into the 3 color USB mode, then the white screen with 0%, but then it sits and then fails, i hit the reset button, and the phone is back, but no rom..
ideas, help, walk-thu's would really help!
tia
http://forum.xda-developers.com/showthread.php?t=369282
did you hard spl?
this is my first post
sorta new to htc, but i've worked some with flashing and working with motorolas, so i'm not totally new to all this. i've got an issue i haven't been able to find a thread about though. i've got a tilt/kaiser that got interupted during a file transfer and was going only to the "tri color" screen/ bootloader (i assume this is the bootloader screer). while in this screen active sync doesn't recognize the phone, but i've read that isn't really abnormal. i tried various hard spl jump spl "shots in the dark" but i haven't been able to figure out if there are actual programs that i need to use to install these roms, or if its supposed to just "work". mtty see's the thing sometimes, and doesn't other times. any how, after hours of messing around, i found that if i unplug the usb and bull the batter, then reinsert the battery and immediatly press the power button it boots. i thought i inadvertantly fixed it, but i tried to do a hard reset (soft keys, and stylus deal) and it went directly back to the multi colored screen. i pulled the batt and put it back in and didn't push anything and it went right to the same screen. i then pulled the back and did the immediate power button and it booted again.
so, all that to say, i know its not actually fixed, but active sync can see it now, so i assume my actual question needs to be: how do i actually "flash"/"reflash" the at&t rom and is that actually what i need to do?
the info on the tri color (and white, quad color??) screen is:
KAIS1*0
SPL-1.56.0000
CPLD-8
and at the bottom it will read serial if the cable is unplugged and usb when it is
thanks in advance for any help
first i would try a hard reboot tto do this yuo have to hold down the two soft keys and hit the reset button with the stylist what you are doing is a soft reset try this and let me know what happen
after that you have to flash hard spl inorder to flash a new rom
You need to install hard spl before attempting to flash a new/cooked rom, see the kaiser wiki, flashing without hard spl will brick your phone. If you have already tried flashing then try mtty task 2a to restore to factory default. Check the Kaiser Wiki, all the info you need is there.
let me know if you need help with hard spl
sorry, i've been out of town and haven't had any time to mess with this problem. i'll do some more reading about hard spl and flashing before i go much farther. i did try the hard reset with the softkeys and stylus but it just went back to the multi colored screen i remember. i also remember that after sucessully getting it to actually boot three consecutive times by holding the power button briefly after inserting the battery, i tried it a fourth time and could never get it to start all the way back up. we'll see how it goes and i'll try to post something difinitive either way. thanks for your help so far.
hi all
i got a magician from a friend to play with but when i got it i only saw it starting up and then by align screen it would boot further
ive went to the wiki and checked ive i could find the combo for hard reseting this phone(whitout succes) i managed to find how to get in bootloader so i checked it
when i go in the bootloader my screen doesnt light on(is this normal because my other devices do this)
further it says v1.02 on the bottom of the screen
now ive tried to insatl the dutch t mobile rom from the wiki but i get a connection error
now ive seen that updating this phone doesnt go like on a blackstone\rhodium and it has something to do with a sd card in it?
i have the gap for sd card but not one in it(is this nessacary?)
after the connection errors i cant even see the align screen anymore it goes straight to bootloader when i press only the on button and getting out the battery for a minute and put it back in also brings me to the boortloader when i press the power button:S (now its working and i can get to align screen again:S)
can someone please help me fix this phone
best regards mini
You have Rome. You need from T-Mobils Rome:
- ms_. nbf
- nk.nbf
- radio_. nbf
All that in the folder suspended below copy. The device in the boat mode bring (On top the left and right key + power) Then you are able to do him flashen.
thanks for the reply
got a exe file to use but going to try to extract it when im home and hope i get those files from it
stil not working
tried it a couple of times but i always get this message
btw in bootloader it says v1.02 on the bottom
and strating in bootloader doesnt work at all for updating because the program doesnt see the phone:S
i have to get it started up to the point of align screen then connect it to comp with activesync
then i got those screens
when i start the phone i see the next things on the phone in spalsh screen
r1.12.00
g1337.42
d1.12.00
i dont have a memorycard in it dont know ive thats nessacary
best regards miniterror
one more with the back sticker so it really is a magician
If is a Magician. The mistake 101 means which does not fit the ID. What you can still try to protect your Rome and more than 416 bits, a Big Storage Rome to flashen. You can make this everything about memory map. You find instructions here.
ok i dont get it at all so i'll throw away the phone
thanks anyway for trying to help me
So I'm backpacking around Europe and decided to go without a PC and wouldn't you know it.... My phone is screwed up.
The problem is that I was using TomTom the other night in Norway and I think I either waterlogged the screen or maybe a driver failed in SW. I have been having problems with a certain software combo on top of PDAUltimate and have had to 'reset' the OS because it got painfully slow.
So my question is about if there is a way to reflash the guy or get it to run the 'reset' process where it reinstalls the OS and clears it without a screen (only keyboard) and while it is locked?
See the screen died but I could still run most apps with just the keys at the bottom. However one of them runs the 'Lock' command on the home screen and that's the one I hit. ;( I could unlock it if I could slide the bar but the screen is not working so I can't do that.
Question #2. Is there a way to work the unlock slider from the buttons?
If I could get back to the start menu then I could run the system reset command there.
I did think about getting the files onto a SIM and use the Hard SPL to reflash so that is my long term solution but for now I have no PC.
TyTN4Me said:
So I'm backpacking around Europe and decided to go without a PC and wouldn't you know it.... My phone is screwed up.
The problem is that I was using TomTom the other night in Norway and I think I either waterlogged the screen or maybe a driver failed in SW. I have been having problems with a certain software combo on top of PDAUltimate and have had to 'reset' the OS because it got painfully slow.
So my question is about if there is a way to reflash the guy or get it to run the 'reset' process where it reinstalls the OS and clears it without a screen (only keyboard) and while it is locked?
See the screen died but I could still run most apps with just the keys at the bottom. However one of them runs the 'Lock' command on the home screen and that's the one I hit. ;( I could unlock it if I could slide the bar but the screen is not working so I can't do that.
Question #2. Is there a way to work the unlock slider from the buttons?
If I could get back to the start menu then I could run the system reset command there.
I did think about getting the files onto a SIM and use the Hard SPL to reflash so that is my long term solution but for now I have no PC.
Click to expand...
Click to collapse
Do a master rest. Hold in the 2 softkeys and use stylus to push reset button. It will reload OS from begining. remember to pull SD and sim cards
Well it all depends if your ROM had screen alignment and stuff on cold boot or not! If it doesnt, then you are good to go, if not, you have to use the screen.
Disable auto lock for #2
I had the same issue with sat nav and pda ultimate, hard reset didn't fix, the only solution is to flash another rom, i have had this issue with the 3 latest PDA roms with igo and tom tom.