Related
Hello,
I have i diamond but i want to bought a Touch PRO can you answer at this question :
Touch Pro with Tomtom7 is lag like diamond or not ?
thanks in advance.
@+++
tomtom 7 and diamond
I've got tomtom 7 up and running with no lag at all, but i know that the "wrong" version will be very laggish, så my advice get the diamond version that works!!!
Did you get TT7 working with TOMTOM Home 2.3? I tried, but my Touch Pro is not recognized as device. Without the device being listed, I cannot buy a map and load it to the TP...
nethopper said:
Did you get TT7 working with TOMTOM Home 2.3? I tried, but my Touch Pro is not recognized as device. Without the device being listed, I cannot buy a map and load it to the TP...
Click to expand...
Click to collapse
Do a search in the kaiser section ... the answer is there somewhere. I know that when i installed TT7 on my Kaiser, i had to rename and move the installation folder. An error would still be reported by TT Home, however this could be ignored, and sync would then happen normally.
I have TT7 working fine and very fast on my Pro and on my Diamond - version 7.450.9028 with the official Diamond Maps purchased, downloaded and installed from tomtom.com - the Diamond Ver 7 maps are specifically designed for the VGA screen but actually take up less memory?
Also - both versions of TomTom home also work well but I preffer ver 2.3 as it was easier to add the extra's such as Map Styles, new voices and a car icons!
Hope that helps?
.
Blob8me said:
I have TT7 working fine and very fast on my Pro and on my Diamond - version 7.450.9028 with the official Diamond Maps purchased, downloaded and installed from tomtom.com - the Diamond Ver 7 maps are specifically designed for the VGA screen but actually take up less memory?
Also - both versions of TomTom home also work well but I preffer ver 2.3 as it was easier to add the extra's such as Map Styles, new voices and a car icons!
Hope that helps?
.
Click to expand...
Click to collapse
Bah... My Touch Pro didn't come with TomTom...
The touch pro does not have TT7, however you can get the cab from the kaiser forum. Maps can be purchased from Tom TOm - select the TOuch Diamond under map ugrade.
TT7 works great also on my Touch Pro (as long as no other programs are running, which preferably should be the case). Can't compare to TT7 on the Diamond though since I don't have one, but can only assume that the extra RAM on the Touch Pro could be making the difference here!??
ardsar said:
The touch pro does not have TT7, however you can get the cab from the kaiser forum. Maps can be purchased from Tom TOm - select the TOuch Diamond under map ugrade.
Click to expand...
Click to collapse
for "VGA devices" in this thread http://forum.xda-developers.com/showthread.php?t=401679 I assume...?
kempas said:
for "VGA devices" in this thread http://forum.xda-developers.com/showthread.php?t=401679 I assume...?
Click to expand...
Click to collapse
tomtom 7 works okey and responds fine, however, comparing it with a tomtom one and for example passing a river, it seems to lag 50 meter behind, so you get the directions a little later then it should be
So this way you may mis an exit.
smaberg er du dansker?
How have you managed to get maps downloaded to Touch pro.
I can't get TomTom Home to detect the touch pro, i have tried everything.
I only have the free london city map.
OK, TT7 and Touch Pro is killing me... I tried a number of things and I cannot get it to work with MapShare. The device never shows up in TOMTOM Home. So here are some specific questions:
Which version to install?
a) ttn7.cab (12351909 Bytes)
b) TT_Nav_7.450.9028_repack3-vga-black.cab (12348539 Bytes)
The Navigator folder should be moved to Program Files with following content?
contacts, itn, logging, microbrowser, sounds, voices, CurrentMap.dat, data.chk, navigator.cfg, TomTom Navigator.exe, ttnavigator.bif, UserPatch.dat
Is that correct?
The bif file has the following content:
[TomTom NAVIGATOR]
DeviceName=HTC-RAPHAEL
DeviceVersionHW=Windows CE 5.2
DeviceSerialNumber=<removed>
DeviceUniqueID=<removed>
ApplicationVersion=7450
ApplicationBuildNumber=9028
UserName=<removed>
UserPassword=<removed>
CurrentColorSchemeBuiltIn=0
CurrentVoiceInfo=Jane
Features=PlusDownloadDynamic,PlusDownloadGeneral,PlusDownloadMap,PlusDownloadPOI,PlusDownloadScheme,PlusDownloadUpgrade,PlusDownloadVoice,PlusDownloadRingTone,PlusMessageNotification,PlusPushChannel,PlusTraffic,PlusWeather,PlusBuddies,PlusMobileSafetyCameras,PlusRoadConditions,PlusFixedSafetyCameras,PlusOnlineCamera,Newyork,Itinerary,Caymann,Durham,Handsfree,PhoneFeatures,CarSymbol,SDSlot,SMSSupported,SupportKeyControl
SupportedPatchTypes=1f
NrSupportedErrorTypes=132
UserPatchDatVersion=102
CompressedPatchVersion=150
MapServerPatchDatVersion=104
DeletedPoiDatVersion=200
ServerLineIndexDatVersion=102
ServerNameIndexDatVersion=102
And a link needs to be in the StartMenu/Programs...
But all this did not work. Any suggestions?
Thanks
Dils said:
How have you managed to get maps downloaded to Touch pro.
I can't get TomTom Home to detect the touch pro, i have tried everything.
I only have the free london city map.
Click to expand...
Click to collapse
Make sure the tomtom app is installed under "navigator" and not "Intern guheugen". Create a new directory under root and copy all the files across. Tomtom Home should then recognise your device.
I have TomTom 6 on my Touch Pro and it works stonkingly well, no real difference in performance from my old Navman. I had to turn off "assisted GPS" in Schaps advanced config though cos it kept losing the signal every 5 seconds or so with it enabled.
ardsar said:
Make sure the tomtom app is installed under "navigator" and not "Intern guheugen". Create a new directory under root and copy all the files across. Tomtom Home should then recognise your device.
Click to expand...
Click to collapse
I have tried that still does not work
nethopper said:
Which version to install?
a) ttn7.cab (12351909 Bytes)
b) TT_Nav_7.450.9028_repack3-vga-black.cab (12348539 Bytes)
Click to expand...
Click to collapse
I installed repack3 and it is working great although I'm not using mapshare.
grahamrb said:
I installed repack3 and it is working great although I'm not using mapshare.
Click to expand...
Click to collapse
That's just the point of this thread... I want MapShare to work so that I can purchase maps...
Still working on this one... It looks like the TOMTOM Home application is looking for the ttnavigator.bif on the device and once it finds it, the device is listed? Can someone confirm this? By just copying a ttgo.bif file to the root of a removabale media, this is being recognized by TTH as a device. And the older verion of TTH works with the TP having ttnavigator.bif in Program Files\Navigator. Any suggestions on how to solve this puzzle?
I have exactly the same problem - TOmTOm home does not see any device connected. Strange that i had no issues with this on my kaiser, yet i can't get it to work on the pro.
Hi,
Just thought i'd share the news that tomtom home now works and syncs with the touch pro, so start buying your maps!!!!
Download the latest version from Tomtom
thanks for the tip!
but I can't seem to get any mapshare updates....
will play with my settings to see if that might do the trick
I also have problems to get MapShare updates. It tells me that my maps are up to date. I don't believe this. ;-)
i get the same also, and all the tweeks suggested in the kaiser forum dont work.
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
dirkmeissner said:
I also have problems to get MapShare updates. It tells me that my maps are up to date. I don't believe this. ;-)
Click to expand...
Click to collapse
Sounds to me like you haven't enabled map sharing in TomTom on your phone. I had the same until I did that, and now it works fine.
i've upgraded to the latest version, and have enabled map share in both tomtom home and on the device. I still can not get map share to update.
I'm not sure then. The only difference between what I said and just enabling map corrections was that I reported one (I have been living in my current house for >4 years and TomTom still don't have it as a valid address. I have reported it several times through MapShare and it still doesn't appear as valid).
Ok, i will give that a try - my estate sill has roads that don't exist and although they have been reported many times, have still not been corrected. The 7.25 maps still don't seem that upto date for my area!
Have you / are you using tomtom traffic. I enabled the month trial, and it appears to update ok, but i never see any traffic information on the traffic map. The update symbol changes to green after an update, therefore indicating that it has downloaded data. On the liscence screen, it reports that traffic is enabled upto 22/10/08.
Thx it works fine. I had 65000 changes for my 6.8 Europacard.
Xtreme XL said:
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
Click to expand...
Click to collapse
...where did you get the latest TT Version?
Are you using the version 7 of the maps?
cyron_at said:
...where did you get the latest TT Version?
Are you using the version 7 of the maps?
Click to expand...
Click to collapse
It can be found a few posts below this one. however if you cant search, heres the thread
http://forum.xda-developers.com/showthread.php?t=427744
http://forum.xda-developers.com/showthread.php?t=427744&page=2
post #19
yes, i'm using west & central europe 2GB 7.25.1981 and it works just fine
How did you guys manage to get Home 2.4.. to sync with navigator 7? Is navigator installed on the phone or storage card?
Mine is installed on the storage card and Home 2.4 can't seem to find it.
DonDie said:
How did you guys manage to get Home 2.4.. to sync with navigator 7? Is navigator installed on the phone or storage card?
Mine is installed on the storage card and Home 2.4 can't seem to find it.
Click to expand...
Click to collapse
mine is installed on the phones memory. only the map is on the storage card.
no problems here with TT Home 2.4
You need to make sure that tomtom app is installed within programs. Depending on what cab you have used, it may have installed the application under a strange (german i think) folder name.
Xtreme XL said:
now it works!
i've updated my version of Tomton to 7.451, and now tomtom Home automaticly updates my map.
Click to expand...
Click to collapse
Hi - what else is different about 7.451 vs 7.450? - searched but I can't find anything.
kc1 said:
Hi - what else is different about 7.451 vs 7.450? - searched but I can't find anything.
Click to expand...
Click to collapse
no id!
the only thing thats different is that the 7.451 allows you to use Mapshare with Tomtom Home.
I don't have a clu what else could be different (did not find any other changes so far)
Xtreme XL said:
no id!
the only thing thats different is that the 7.451 allows you to use Mapshare with Tomtom Home.
I don't have a clu what else could be different (did not find any other changes so far)
Click to expand...
Click to collapse
umm, still hasn't allowed me to get mapshare working with 7.25 maps.
ardsar said:
umm, still hasn't allowed me to get mapshare working with 7.25 maps.
Click to expand...
Click to collapse
I basicly tried every setting in Tomtom and in Tomtom Home, and suddenly it all worked.
perhaps a stupid question, but did you allready try to mess with the settings in TTH/extra/mapshare prefferences..... and what does it say in the bottom right corner: After this update ...Mb??
just press OK and let the update run
hope it helps!
have a qeustion wil tomtom 6.030 work on touch diamond 2 because i have dis one all ready
i really hope its gonna work
tnx
hope somebody response
No, you'll need Tomtom 7, which you can get from this forum. Tomtom 7 does not work with your version 6 maps, so you'll have to purchase new maps. Yes it sucks. Also, you cannot move your Tomtom services, such as Traffic, over to your TD2. This is because Tomtom refuse to support the device.
Sorry for the bad news.
Personally, I'm so pissed off with Tomtom that I'm seriously considering using something else like IGo.
tom tom
yes i'am not gonna buy the tom tom 7 i'am really mad too
i have igo 8 also then i'm just gonna put that one on my td2
really tom tom sucks for not make tom tom 6 work on td2
thanks for your answer you really help me out
GRTZ
tomtom 6 with tt6 maps works fine on TD2, I had 6.75 working with all maps of europe.
Why work with tomtom6 when you can get tomtom7.9 with the latest 830 maps..??
hi, sorry for being a noob but....
I just installed tomtom 7 7.910.9185 VGA but it wont show an icon in my all programs' list.
the only way to run it is running it through file explorer. has anyone faced this problem too or is there a sollution to this?
thanks in advance
hinsen said:
hi, sorry for being a noob but....
I just installed tomtom 7 7.910.9185 VGA but it wont show an icon in my all programs' list.
the only way to run it is running it through file explorer. has anyone faced this problem too or is there a sollution to this?
thanks in advance
Click to expand...
Click to collapse
Sounds like a pirated version?
tomtom
Hey all! On my phone it is that version that works perfectly! If there are problems with the voices, simply copy the voices folder on your memory card!
http://rghost.ru/310020
I got ttn7.915.9196.vga_black_yarda working here perfectly with with Western-Europe 830.2307. It came in my All-programs list and i added it myself to the "today"-screen with comes with your HTC.
Hello
Where should I put the voices folder?
When I start the tt7 they ask me to add a new card, then I go directly on the website to choose the card I download it but then where should I install it ?
Thank you
Voices goes in the root directory of the SD card. Same as the maps directory.
Latest tt7 bought from tt on 4GB microSD does'nt install nor work
delfsegek said:
I got ttn7.915.9196.vga_black_yarda working here perfectly with with Western-Europe 830.2307. It came in my All-programs list and i added it myself to the "today"-screen with comes with your HTC.
Click to expand...
Click to collapse
How did you do it, man?
I bought the SD-Card TomTom 7 with Europe_1GB maps (825 built 2159) offered on TomTom's website since some weeks.
Neither install, manual install, TomTom Home nor something else works.
The extracted "TomTom Navigator.exe" and also the Home app 2.6 refused to support my O2 TDII device.
Then I installed 7.910.9185 black VGA, but I was only able to download one city map. My bought Europe maps are recogniced, but rejected when I select it through menu "maps change".
How can I make use of my Product code now? Or is there any chance at all?
Please help, or send me some hints by PM.
hinsen said:
hi, sorry for being a noob but....
I just installed tomtom 7 7.910.9185 VGA but it wont show an icon in my all programs' list.
the only way to run it is running it through file explorer. has anyone faced this problem too or is there a sollution to this?
thanks in advance
Click to expand...
Click to collapse
You have to make a shortcut to windows\startmenu\programs.
You can copy the file and paste it as a shortcut to the programs folder with explorer. If you don't like the name "Shortcut ..." you can rename the shortcut to whatever you like.
If you now look at your programs than you will see your shortcut. There is also the problem of the clipped voice. You can run any audio program except Media Player with a silent audio file, then the voice clipping is gone.
You can also search for the audio problem fix. Someone has made a cab file to fix al the problems in one installation.
http://forum.xda-developers.com/showthread.php?t=513621
Tomtom 6 'memory access violation' ideas wanted!
Had Tomtom 6 (fully legal) working fine on my Kaiser. On TD2/Topaz, whatever I do (soft,hard reset, load from different sources) I get the same 'Tomtom cannot start: memory access violation' msg. Internet search shows lots of people with same prob, but no answers or workarounds. Seems to me might be screen/display related as TT starts to load but with squashed format before hanging. Reluctant simply to buy TT7 in case a) that exhibits the same prob and TT specifically do not support the TD2/Topaz at the mo and b) some people seem to have got TT6 working fine on TD2.
Any ideas gratefully appreciated- might have to have a look at iGo as previous poster suggested, which is a shame as have used Tomtom since v2.
Thanks,
Tony
2tone said:
Had Tomtom 6 (fully legal) working fine on my Kaiser. On TD2/Topaz, whatever I do (soft,hard reset, load from different sources) I get the same 'Tomtom cannot start: memory access violation' msg. Internet search shows lots of people with same prob, but no answers or workarounds. Seems to me might be screen/display related as TT starts to load but with squashed format before hanging. Reluctant simply to buy TT7 in case a) that exhibits the same prob and TT specifically do not support the TD2/Topaz at the mo and b) some people seem to have got TT6 working fine on TD2.
Any ideas gratefully appreciated- might have to have a look at iGo as previous poster suggested, which is a shame as have used Tomtom since v2.
Thanks,
Tony
Click to expand...
Click to collapse
Although I haven't tried it myself I believe it is mainly a screen size issue, if you use the "WVGAFIX3_BY_Cotulla" http://forum.xda-developers.com/showthread.php?t=455974 and change the res TT6 will work.
If you try let us know how you get on.
Tomtom on HD2???
on my HD i was working with tomtom latest version but now on my Leo when i start tomtom i have message"this device is not compatible with this version of tomtom"
someone use tomtom here?can anyone help to make it work please?
djcedric said:
Tomtom on HD2???
on my HD i was working with tomtom latest version but now on my Leo when i start tomtom i have message"this device is not compatible with this version of tomtom"
someone use tomtom here?can anyone help to make it work please?
Click to expand...
Click to collapse
Create a new shortcut.
Or try 7.9.10 I can confirm this version works
xmoo said:
Create a new shortcut.
Or try 7.9.10 I can confirm this version works
Click to expand...
Click to collapse
yes your right,this version work,thanks mate
Turn Left.. no LEFT... Mayday Mayday...
Hey Mate,
Working [email protected]! Thx for the tip!
Without you i was 'lost'...
Grtz,
xmoo said:
Create a new shortcut.
Or try 7.9.10 I can confirm this version works
Click to expand...
Click to collapse
xmoo said:
Create a new shortcut.
Or try 7.9.10 I can confirm this version works
Click to expand...
Click to collapse
where i can get this version.please! help me out.thank's
Im using this version : TT_7.916.9189_VGA and does work w/o problems. Try search, i downloaded it from xda...
Petulinek said:
Im using this version : TT_7.916.9189_VGA and does work w/o problems. Try search, i downloaded it from xda...
Click to expand...
Click to collapse
why you don't post it for us then?thanks in advance.
Im sorry, i dont know where i find it.. Its a few days ago...
I upload it :
Thanx Petulinek
Trying aswell...
Tomtom doesn't give any Resolution errors, so it should work for any resolution, but the Tomtom Version Tomtom 7.910
Tomtom 7.910 needs v 8.XXX maps, but you should be careful some map versions are only for PNAs ... You you should download the maps compatible with PDA or PDA&PNA
Tomtom is the best for Europe, but I do not like its simplicity, I like iGO 8.3.X Maps are updated monthly
Tomtom can not identify your device's com ports as well, for example, it may find your internal gps as a bluetooth gps, or viceversa.. So you should search for any kind of gps device in settings of tomtom in case if it does not recognize automatically
ultraslan said:
Tomtom doesn't give any Resolution errors, so it should work for any resolution, but the Tomtom Version Tomtom 7.910
Tomtom 7.910 needs v 8.XXX maps, but you should be careful some map versions are only for PNAs ... You you should download the maps compatible with PDA or PDA&PNA
Tomtom is the best for Europe, but I do not like its simplicity, I like iGO 8.3.X Maps are updated monthly
Tomtom can not identify your device's com ports as well, for example, it may find your internal gps as a bluetooth gps, or viceversa.. So you should search for any kind of gps device in settings of tomtom in case if it does not recognize automatically
Click to expand...
Click to collapse
Its not true...
QVGA TT doesnt work on VGA or WVGA.
Maps are update continualy via map share.
TT identify COM ports without problems on all HTC devices or zou can set port manually.
any lag on tomtom?
On the videos looks like tomtom have a lag of 20 30 meters, and trying myself igo and copilot doesnt have lag at all, so, why use tomtom?
Guys here you'll find all latest TT. For sure on HD2 you should use VGA version:
Mod Edit - Removed warez links
kersh said:
any lag on tomtom?
On the videos looks like tomtom have a lag of 20 30 meters, and trying myself igo and copilot doesnt have lag at all, so, why use tomtom?
Click to expand...
Click to collapse
Check following video, you can see difference between TomTom and Copilot.
http://www.youtube.com/watch?v=xHB_8_4cBw4
I love TomTom and I use it since version 4, but on HD2 it's not so cool....
Lord Spectre said:
Check following video, you can see difference between TomTom and Copilot.
http://www.youtube.com/watch?v=xHB_8_4cBw4
I love TomTom and I use it since version 4, but on HD2 it's not so cool....
Click to expand...
Click to collapse
i have used tomtom on the HD2 and it is very fast, the video above does not do it justice, try it yourself and see.
dragon_soft said:
i have used tomtom on the HD2 and it is very fast, the video above does not do it justice, try it yourself and see.
Click to expand...
Click to collapse
hehehe I'll try when I'll get the HD2.... Here in italy we are the first country in Europe for Mobile selling, but we are the last country we receive the HD2.... Cool!!
svetluska said:
Its not true...
QVGA TT doesnt work on VGA or WVGA.
Maps are update continualy via map share.
TT identify COM ports without problems on all HTC devices or zou can set port manually.
Click to expand...
Click to collapse
I shared QVGA version of 7.910 on one web site, but before sharing I tried it on Htc HD, Htc Diamond, Htc Diamond 2, Htc TyTN II. So these resolutions are, QVGA, VGA, WVGA.
TT sometimes identify your Internal GPS as a bluetooth GPS, I say this information if some can not find their internal GPS, aim is to help to solve issues not to say bad things about TT.
If you have licensed version you may find correct maps, but ones that do not have should be careful to download maps that are compatible with PDA.
Regards.
Anyone has the same problem?
I've tried TT 7.910, 7.915 and 7.916, but all have a refresh lag.. So normally the screen (your position) is updated every second, but at my HD2 it updates in 5 or 7 seconds!
I've tried the internal GPS as wel the COM4 and 9600 baud GPS...
Google Maps works perfect (as far as I can see).
Don't know what to do about it.
Anyone?
Xmoo, The TomTom application works indeed but as soon as it starts it says it can't find any maps and then tries to make an internet connection in order to download maps at www.htc-citymaps but it then results in an error as the webpage doesn't exist.
How do you get TomTom to work with the maps and speech ?
Note: the installation CAB was 9 MB's hardly enough to conatin a full working navigation tool so it's clear that i'm missing data.
TT Maps n voices
black vga cab is 13.3MB - no voices, no maps no htc-citymaps - no joy....
Any help...anyone?
Hi all,
I see that you can now download tomtom v7.916 here
http://forum.xda-developers.com/showthread.php?t=556316
which would be the best version for the TD2 ( or an old spv m700 for that matter as thats what i use for sat nav in the car) the QVGA or the VGA
am really interested in the type for each phone
also what version maps should i be buying? I am guessing v8 but does it matter which version map
thanks in advance
Andy
stringman said:
Hi all,
I see that you can now download tomtom v7.916 here
http://forum.xda-developers.com/showthread.php?t=556316
which would be the best version for the TD2 ( or an old spv m700 for that matter as thats what i use for sat nav in the car) the QVGA or the VGA
am really interested in the type for each phone
also what version maps should i be buying? I am guessing v8 but does it matter which version map
thanks in advance
Andy
Click to expand...
Click to collapse
Mod Edit: Warez is not permitted on XDA first and final warning
In my signature you can see what i have on my TD2 and it works like a charm.
I would upload the .cab but thats not alowd here i'm sorry
Also remember that u install NETCFv35.wm.armv4i and the file down here.
thanks guys
thats the td2 sorted i have got 7.45 but the keyboard is so small!!
anyideas on the spv m700
I have tomtom6 on which works fine but i want to be able to change the cursor colour so i am thinking of the 916.
any idea if the td2 version will work.
finally is there way to find out what maps are compatable with each version
thanks in advance
help
hi mate
wondering if you could help.
trying to setup tt with the setup you have, tt keeps telling me 'no maps found' ?
I have placed them in the root of the sd card and they have ben activated, where am i going wrong?
any help would be greatly appreciated
Thanks in advance
It was such a long time ago that i am afraid i cant remember.
i do remember trawling through lots of posts on here and remember seeing lots of post similar post to yours ( and answers)
best thing is to do a search
sorry i can help any more
yasinism said:
hi mate
wondering if you could help.
trying to setup tt with the setup you have, tt keeps telling me 'no maps found' ?
I have placed them in the root of the sd card and they have ben activated, where am i going wrong?
any help would be greatly appreciated
Thanks in advance
Click to expand...
Click to collapse
..try to move them to the "My Documents" directory...
An other issue could be that the maps you are using are not compatible with your tomtom version..
Thanks for all the advice people.
I have managed to get it working, i had to create a 'CurrentMap.dat' file and place it in '\My Documents\TomTom'. This tells tomtom which map to look for.
forum.xda-developers.com/archive/index.php/t-268022 .html
Works great now!
djg269 said:
In my signature you can see what i have on my TD2 and it works like a charm.
I would upload the .cab but thats not alowd here i'm sorry
Now look here
Also remember that u install NETCFv35.wm.armv4i and the file down here.
Click to expand...
Click to collapse
With WM 6.5 you don't need the TomTom Audio Fix anymore
All 7 versions of TomTom wil work with the HTC TD2.
I have had 7.450, 7.915, 7.916 and many different builds.
Now I have v7.916 Build 9192.
There is a new version of TT
TomTom Navigator 7.918.9193
can anyone please let me know what settings you use for Tomtom 7?
For example, do you select the "internal gps" or "other enmea"? If you select the "Other .." then what "COM" and "Baud Rate" do you use?
I have wm6.5 and tomtom 7.45.
Thanks
It depends what you are using
What is your device?
Do you use an external GPS device?
I use what is in my signature en because i use GPSModdriver i take
other nmea - 9600 baud - GPSModdriver
InformationTechnology said:
can anyone please let me know what settings you use for Tomtom 7?
For example, do you select the "internal gps" or "other enmea"? If you select the "Other .." then what "COM" and "Baud Rate" do you use?
I have wm6.5 and tomtom 7.45.
Thanks
Click to expand...
Click to collapse
If you select "Other", choose COM4, baud rate can be 4800 or more, 19200 may be a good choice. Note that some versions of Tomtom 7 do not show properly the list of received satellites, both with "internal Gps" or "Other..."
One most recent version of Tomtom solves this problem and also solves the audio cutoff issue (for WM6.1 users).
Aikon
my device is diamond2 and i have installed tt7.45 on it successfully but i do not get any gps signal.
i was wondering is there any particular set up required for it to work?
No i have the TD2 also and in the beginning i used internal GPS and it worked great accept for the lag.
Go to settings from windows and go to external GPS
in Programs my setting says COM4
in Hardware my settings says None and 4800
in the third tab(toegang in dutch) chek the box
Try to install the latest version of TomTom Navigator 7.917.9186
and use GPS Mod Driver http://forum.xda-developers.com/showthread.php?t=571266
InformationTechnology said:
my device is diamond2 and i have installed tt7.45 on it successfully but i do not get any gps signal.
i was wondering is there any particular set up required for it to work?
Click to expand...
Click to collapse
...try to get outdoor ;-)
Download the latest Quickgps.
How long did you wait?
I tried outside including on top of the roof at work!!! waited for 30 mins, to signal at all!!!! not even one grey bars!!!
I have the TT 7.45, wm6.5 (official). I have run quick GPS a couple of times as well.
I was wondering if it would help if I cohse to install a custom FW like Dutty's.
But I will try to get the latest TT and GPS Mod Driver and report back here on how I get on.
thanks
InformationTechnology said:
I tried outside including on top of the roof at work!!! waited for 30 mins, to signal at all!!!! not even one grey bars!!!
I have the TT 7.45, wm6.5 (official). I have run quick GPS a couple of times as well.
I was wondering if it would help if I cohse to install a custom FW like Dutty's.
But I will try to get the latest TT and GPS Mod Driver and report back here on how I get on.
thanks
Click to expand...
Click to collapse
really strange; I never had such problems; I also didn't need the gps mod driver;
How is tt configured? Built in receiver?
Cyron - which version of TT have you installed?
What settings have you applied (internal GPS, or NMEA with com4)?
thanks
InformationTechnology said:
Cyron - which version of TT have you installed?
What settings have you applied (internal GPS, or NMEA with com4)?
thanks
Click to expand...
Click to collapse
..I had all version installed; actualy I use the latest one.
My Settings: Internal GPS
Edit: You can try Google maps (active GPS) to find the satelites.