Related
I have MS Voice Command UK version. I'm using the very stable WM6 ROM from jwright; is it possible to change the US version to the UK version so it recognises the dial pattern correctly?
If it is possible, it would make my device perfect.
I have been trying to locate that for ages, cant see anywhere selling it (V 1.6)...Where did you get it?
Thanks
jasonkruys said:
I have been trying to locate that for ages, cant see anywhere selling it (V 1.6)...Where did you get it?
Thanks
Click to expand...
Click to collapse
Jason,
This has been available for ages, try http://www.handango.co.uk/PlatformP...2&platformId=2&productType=2&productId=151270
Regards
Mav
Where I got it from, in fact.
Thanks guys, I'm sure I looked there before, but only saw the 1.5 version..Got it now
I don't use this ROM, so I'm only guessing here. Presumably Voice Command does not show up in Remove Programs.
In which case you could unlock the extended ROM and replace the MSVC US cab with your MSVC UK cab and do a hard reset. Your version should then get installed (at the expense of all you installed programs and setting obviously).
Or has JWright done something more clever with his ROM to get MSVC on there?
Mike
Voice Command is integrated into the core ROM on WM6.
Although you can still install the UK version, it will use up storage space, but it should still work, it was what I did on the earlier WM6 builds to get the bluetooth button issue resolved, and always worked fine.
Hey guys just got a x7510 from UK (live in Aus) and i haven't changed the rom (its still stock, that's because i can't find any roms for the x7510 most what ive looked at are for the previous models).
Ive tried all kinds of threads and methods and i still can't get voip working Have any of you guys made it work?...and so could you please help me? Ive installed the voipwm6.cab (so i could have internet calling) and then did this http://forum.xda-developers.com/showthread.php?t=299950 . Ive also tried using the sip tool, it still won't work over wifi. Ive also searched Google and this forum and can't find a solution.
Each time i dial ill start dialing than hang up in like 1 second (and the phone doesn't even ring (was trying my house one).
Any help would be greatly appreciated
P.s (my first HTC device )
Vico100 said:
Hey guys just got a x7510 from UK (live in Aus) and i haven't changed the rom (its still stock, that's because i can't find any roms for the x7510 most what ive looked at are for the previous models).
Ive tried all kinds of threads and methods and i still can't get voip working Have any of you guys made it work?...and so could you please help me? Ive installed the voipwm6.cab (so i could have internet calling) and then did this http://forum.xda-developers.com/showthread.php?t=299950 . Ive also tried using the sip tool, it still won't work over wifi. Ive also searched Google and this forum and can't find a solution.
Each time i dial ill start dialing than hang up in like 1 second (and the phone doesn't even ring (was trying my house one).
Any help would be greatly appreciated
P.s (my first HTC device )
Click to expand...
Click to collapse
I could'nt get that working either.
The easiest way is to use SjPhone client. The interface is a bit dated but it works. Another option is Sling, but its sound quality is atrocious, although the interface is better.
Not familiar with "sling" could you plz pass me a link? thnxs
(hey a fellow Aussie with a x7510, that's rare )
Vico100 said:
Not familiar with "sling" could you plz pass me a link? thnxs
(hey a fellow Aussie with a x7510, that's rare )
Click to expand...
Click to collapse
No, mine is a Dopod U1000. Voip should be the same on all WM6 devices.
Sorry , it is Fring, not Sling. lol, what was I thinking?
http://www.fring.com/download/
to Vico100
I have also got a Ameo 16G from T-Mobile Germany. You dont want to install an extra program, because WM6 support VOIP according to Microsoft. If you cannot find the function, just because the device producer has bloced it. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab, if you cannot find it, pm me your email address, I can send it to you.
jason_shg said:
I have also got a Ameo 16G from T-Mobile Germany.
. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab
Click to expand...
Click to collapse
Hi jason_shg
Is this .cab working for "WIFI" too, or just over GSM?
Tschii
jason_shg said:
I have also got a Ameo 16G from T-Mobile Germany. You dont want to install an extra program, because WM6 support VOIP according to Microsoft. If you cannot find the function, just because the device producer has bloced it. I have installed a plugin for SIP setting, it was called destr0_VOIP_WM61___SIP_Config.cab, if you cannot find it, pm me your email address, I can send it to you.
Click to expand...
Click to collapse
I had tried this before but it never worked for me. I think it may work for extremely limited ISP.
Are you able to make call with it and have good voice quality at both ends?
I have tested it on WIFI, it can work on my x7510. Afer installation, there is a new program named sip config tool in your programs, there you should input SIP informations, such as SIP server user name password, next step you can find a new window at the telephone setting named internet, here you can choose when to use VOIP. But I do think, the voice quality of the VOIP can not make me satisfied.
if you install Skype for PPE, it automatically does VOIP, either WiFi or 3G
I now use AGEphone mobile, which has good skin, user interface, and voice quality.
works great
http://forum.xda-developers.com/showthread.php?t=596682 . d
Hi everybody,
right now I have the HTC Wizard, but I plan to get the HTC Touch Pro as soon as it is out . Beeing a collector, I would hate to loose all my SMS (I probably never will touch my wizard again (sounds somhow dirty)after I have the Pro. Is there a way to save the SMS to the PC (probably in Outlook?) and than transfer them to the new phone?
Somhow connected: My new plan will have included SMS. Now I would like to write them on the PC (preferential with outlook 2003/2007) and than send them via the attached phone.
I think there could be one programm which could do it all, because the problems are related . Anybody an idea?
EDIT: Ok, I found some programs , http://www.dotfred.net/ (PIMBackup) seems good to transfer from one Phone to the other, and it is freeware.
And http://www.jeyo.com/extender.asp (Jeyo Mobile Extender ) seems to do the job, for all questions, but you have to buy it, does anybody know a freeware alternative?
there is a freeware named "MobileAssis" just like "Jeyo Mobile Extender", and better
homepage here: http://www.mycnknow.com/smarthelper.html
btw: make sure when the data restoring, your phone on "fly mode"
my english is not very well, hope can help
Thanx, I checked the page . Unfortunatly my asian (I guess it is mandarin??) is not existent . Does it really integrate in Outlook? And is there a English Version? Thanx a lot.
guys
i've successfully installed BeejiveIM_v0_1_.9.2.4 on my D2.
on another site it was written that it can be installed w/o any serial number and need of registering, activation whatsoever.
so, i select No when asked if i want to activate.
then i try to connect to my YMSG account, it shows that it tries to log in...and then i get this "empty" error you can see in the attachment.
can any1 help? do you guys got this application working on your D2s?
ok, guys, went looking for alternatives and found Nimbuzz or Mundu.
will continue with these...
beejive is goin' bye-bye.
try parlingo or shmessenger (java)
I've been using BeejiveIM on diamond 1 and topaz and I had no problem whatsoever...
I now have 0.9.2.4 installed on my Topaz with WM6.1 and it works fine!
Unfortunately BeejiveIM it's the only messenger that I found and I like for wm touchscreen devices... other are just ugly, hard to use, ...
//BTW, Activate your bejive IM with empty details and try again. (just click on activate and than ok without filling anything)
I use MUndu and it's ok until know. It not have today plugin like IM+ but it's works
Hi -- I just downloaded the new version of Bing. I'm running it on an HTC Sedna with Windows Mobile 6.1. It _seems_ to work fine on my phone. Fine except for the fact that within a minute or two I get a message which says "Your device has been identified as not supported for this application," after which Bing shuts down. Any ideas on how to get around this? This software is supposed to work with WM 6.1 phones and it seems to do so until Microsoft pulls the plug!
Thanks, Alan
Are you using a cooked ROM?
I suggest you to install it on a emulator and see what happens
Thanks -- no, I'm using the standard HTC ROM. (I don't even think there ARE any cooked ROMS for this phone!)
I've never dealt with an emulator, so I don't immediately know how to do what you're suggesting, nor do I have a sense of how time consuming that would be. But would it be worthwhile to go down that road? If Bing worked on the emulator, how would that help me figure out how to make it work on my phone?
I wonder if there's a way to tell Bing that I've got a different kind of phone. I suspect that would fix this. Does anyone know how to do this?
Thanks!
Alan
Ok, but you can share where you got the installation file(just to do a test here).
Thanks.
Yes -- I got it from here:
http://static.appserver.m.bing.net/binaries/winmo/v1/Bing.CAB
I was running the previous version of Bing, and the program sent me to this link to get the updated version (which then gives me errors about my phone not being supported).
Thanks, Alan
Thanks very much, I'm going to test it.
Wait some time...
That's terrific! Thanks so much!
--Alan
Bing...
Works OK on Diamond 1 with stock 6.1 ROM. Not sure if I like it or not..
Right -- I know it works on other WM 6.1 phones. I'm wondering how to run it on mine. I suspect the solution is to make Bing think I'm using a Diamond or some other phone it knows it's compatible with. Anyone know how to do this? What does it use to figure out what sort of phone I have?
Thanks, Alan
It's working on my emulator.
Have you already tried another version?
I don't really understand what you're asking ... I've run this program on two different (stock WM 6.1) HTC P6500s with the same result: it works fine a little while, then I get a message that I'm not using a supported device and the software shuts down. I don't know how running this on an emulator would help me fix the problem. I know that the software works fine on Diamonds, Touch Pro2, Diamond 2, and other officially-supported WM 6.1 phones. And I know that the software detects my P6500 as not supported and therefore will stop working after a while.
SO: the question is how to get Bing to believe I'm using a phone that it considers supported? I've tried replacing P6500 with T5353 (Touch Diamond 2) in a couple of places in the registry:
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ActiveSync\DeviceModel
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\User Agent\Post Platform
But it doesn't seem to make a difference ....
Does anyone have any other ideas about how I might fix this?
Thanks,
Alan
I think that change these registrys:
Code:
\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ActiveSync\ DeviceModel
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings\User Agent\Post Platform
Isn't a very good thing, because this can turn your device unstable.
PS: I'm going to Google for some solution.
I need one thing to solve your problem as fast as I can. It's the error code.
Thanks.
Thanks so much ... Yeah, I didn't leave those registry changes on long: just a quick experiment.
OK, forgive my ignorance, but how can I find out the error code to tell you?
Thank you!
Alan
Error in images, this is after being cooked in, works for a few min but than get a compatibility error and shuts down
Interesting -- that's a different error than the one I get, though mine generally comes up around the same time. Mine says "Your device has been identified as not supported for this application."
How do we find error codes for these?
Alan
It seems they have the same root, this has been cooked in I was hoping to go "around" the not supportive error that you get with the cab file.
Since I took it out of my build I think the best way will be to run it cooked in an emulator to get it.
Huh, interesting...
I'm going to take a better look on this.
nathanpc said:
Huh, interesting...
I'm going to take a better look on this.
Click to expand...
Click to collapse
Thanks,
Att. is the OEM package
You're welcome!
I'm going to take a look when I get in my home, now I'm on a café