Database Info

how to flash tilt via sd card

First of i have looked in many thred but could not get my answer so I posting this.
I was on dutty's new wm6.1 rom but with radio 1.64 but due to constant freezing and gps issue i decided to go back wm 6.0. so i flash my tilt with Duttys Dualtouch v4 RTM.7. everything went ok but now issue is I can not reboot my phone. I after setting up date etc. customisation started and then soft reset. after that soft reset my tilt just hang at dutty's series screen does not go any further. I have tried hard rest, soft rest , going to three color screen and amny other that i can think of but every time i hang (htc log in center, hTc word in middle and dutty's series at right buttom screen). I waited for long time in that case phone goes into blank screen and when i press power it show me some wired screen with many colored dots. ( it that waht called I bricked my tilt). Is there any way to flash tilt via sd card? I show few thread on this site but they are for different brands phone. if there is a way can some one tell me how?

Reset to three color screen with USB
Hit reset, camera and power button all at a time, you will see the three color screen, put your usb port and flash with old rom. That's it....

v3patel said:
First of i have looked in many thred but could not get my answer so I posting this.
I was on dutty's new wm6.1 rom but with radio 1.64 but due to constant freezing and gps issue i decided to go back wm 6.0. so i flash my tilt with Duttys Dualtouch v4 RTM.7. everything went ok but now issue is I can not reboot my phone. I after setting up date etc. customisation started and then soft reset. after that soft reset my tilt just hang at dutty's series screen does not go any further. I have tried hard rest, soft rest , going to three color screen and amny other that i can think of but every time i hang (htc log in center, hTc word in middle and dutty's series at right buttom screen). I waited for long time in that case phone goes into blank screen and when i press power it show me some wired screen with many colored dots. ( it that waht called I bricked my tilt). Is there any way to flash tilt via sd card? I show few thread on this site but they are for different brands phone. if there is a way can some one tell me how?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=336158
the procedure is in there

thank you for quick answer.
it worked I know i can always coutn on you. Once agin thanks

v3patel said:
it worked I know i can always coutn on you. Once agin thanks
Click to expand...
Click to collapse
LOL....should have flashed the radio first
Like the other person said...go the boot loader (aka tri color screen) and install a compatible WM6 Radio.

Khanki said:
Hit reset, camera and power button all at a time, you will see the three color screen, put your usb port and flash with old rom. That's it....
Click to expand...
Click to collapse
THK THK THK!!!!!!

Bt Htc S710 Original Rom

Hello forum members,
would you please help me have the BT HTC S710 Original ROM? I have only seen the BT HTC S620, which when I tried to flash with to rebrand, blanked my HTC S710 screen. When I turn it on, only the two green lights come on either side of the phone ear piece.
It means that a hard reset is not visible on my screen, there is no tri-colour display either.
I have tried other ROMS, and get invalid id errors and error 270. I have tried Dr Gonzo and related ROMS.
It's now three days, no phone no pim, I am lost.
Thanks for your attention.
YOSEFE.
PS. You may PM me if convenient.

Hi YOSEFE,
I have the same problem
I tried the 620 rom and just have the 2 green LED's. I cannot get a bootloader screen and attempts to flash new roms get to 3% and then I get errors.
Did you ever sort this problem out?
Paul.

Have you unlocked ur USPL in ur phone?

You tried to flash a S620 ROM to a S710???? Look in the Wiki, there is a link to the official ROMs on the ftp...

frauhottelmann said:
You tried to flash a S620 ROM to a S710???? Look in the Wiki, there is a link to the official ROMs on the ftp...
Click to expand...
Click to collapse
Yes, I'm afraid I did, by mistake, flash 620 ROM to the 710 [feels rather stupid!]
Not happy with BT’s [mobile operator] own ROM and software that went on the phone, I successfully flashed Dr. Martin Gonzo’s Windows Mobile 6.1 v1.1 and have been using it for a couple of months but when BT launched their new phone software, I decided to try it but because it won’t work with WM 6.1, I needed to then revert back to BT’s old ROM and this was the only one available that I could find [feels rather stupid again].
The screen is completely black; only green LED's on each side of the earpiece shows any sign of life.
Connecting the phone via ActiveSync shows “HTC-S620 Connected” and I am able to browse the files on the phone but not having a display on the phone, I am limited to what I can do.
I have tried running RUU_Vox_HTC_WWE_1.34.405.1_4.1.13.54_03.10.90_Ship.exe but ActiveSync connection is lost and I hear the Windows hardware removed sound shortly after the progress bar is shown.
I’m at a loss as to what to try
Paul.

Shut it down, then hold down camera button and plug in the usb cable. The boot screen should appear and you should be able to flash the normal ROM!

I cannot get the boot screen, or any screen for that matter.
I have tried taking the battery out to make sure the phone is off. Reinserting that battery then holding the camera button down and then inserting the usb lead. The keypad lights up for a few seconds then goes out. ActiveSync then connects but the screen is still black
Paul.

[Edited: Sorry duplicate post]

Sorry for replying to my own post but a quick update...
I have managed to bring the phone back to life and reinstall Dr. Martin Gonzo’s Windows Mobile 6.1 v1.1 on it again.
This is partly assumption and not particularly accurate but the original poster (YOSEFE) might find this useful.
By installing the S620 rom on the S710, not only did I make the screen go blank, I think all the keys ended up remapped and mixed up, therefore any attempt to install Gonzo’s rom ultimately ended in failure because when the phone beeped and wanted a keypress to continue, pressing the left softkey for ‘OK’ or ‘Yes’ did not work because it had been remapped to do something else.
What worked for me is that when the phone beeped during the uspl_116_jockyw.bat install, I pressed the X or C key (I can’t remember the exact one now). One of these keys must have been the ‘OK’ or ‘Yes’ key after the S620 rom muddled things up. I only know this by trial and error over the period of today.
To my glee, the backlight lit up on the display and after a bit of tinkering, I’m back in action again
I won’t be installing a rom designed for another model again!
Paul.

Bat 'n' Ball,
sorry for not returning here to see your post. I will remember the possibility of pressing "X" or "C", should I make the same mistake as before, although like you, I should never do that ever again. However, technology being what it is, who knows?
In the end BT got me sorted out.
Thanks for sharing.

imate jamin boot up screen

oh my head hurts from this. manager came in saying that his imate jamin is not working .. typical managers. it turns on but stays at the htc innovations boot screen.
tried the original shipped ROM but comes up with Error 260: Update Error. USB ok as there's a orange charge light and shows up on bottom left of tri colour screen. tried on a couple of different pc both running xp pro sp3. i've wiki, searched, did resets, etc but still no go.
i just get the following at the tri colour screen
ipl 1.00
spl 2.13
help please? thanks in advance

s710 keypad has mind of its own

Hi.
I have an old HTC s710 and like it. Problem is recently it acquired a mind of its own. It types symbols without any reason, when i lock it i cannot unlock it short of rebooting it, it keeps losing time. Keypad appears to be fine physically, all keys work, until it starts typing stuff on its own. I can lock and unlock it manually, but if i leave it locked for long i cant unlock it.
Initially it had WM6, updated to WM6.1 and later to WM6.5. It was working fine for a year on 6.1, i have upgraded it to 6.5 today to see if that would fix the problem - it hadn't. One new symptom on 6.5 is that it goes to dimmed screen and i cannot un-dim it by pressing any key, i have to lock it and unlock again to get a bright screen...
Any idea what it might be ?
Thanks

Hmm, very weird but my phone used to do the same kinda thing.
You could try to do a hard reset, but i guess as you flashed it with a new rom, i guess it won't help.

you should try another RADIO ROM!
this might be the problem
or you've a problem with your flexcable?
or is your motherboard damaged(by a drop)? mine is so some keys on quertz keyboard have malfunktion sometimes they work sometimes they wont.
you might have a damaged and sofor useless vox but may a simple rom change(radio) could heal

whats the newest/best radio nowadays ?
Haven't been following vox scene for about a year, since i had to learn to flash my phone.
What should i flash it to ?
current radio on my phone is 4.1.13.54_03.10.90.

HTC blackstone problems after ROM upgrade

Hi,
I upgrade my Backstone WM 6.1 pro to this ROM -> http://forum.xda-developers.com/showthread.php?t=592525 and HardSPL_for_Blackstone_OliNex.
But now, then HTC boot, WM is in diferent colors (such as PC in 250 colors), but when I press power button and turn display off an then turn on, all colors are back. Second problem is that the WM ir very slow and toch screen sometimes work and sometimes don`t work. Summary I can` use my phone.
I try to instal back WM 6,1 but the problem not lost.
Please help me!

I have the same problem?
You have solved ?

I would guess from the sounds of it, that u used the wrong spl, plrease read this very good guide : http://forum.xda-developers.com/showthread.php?t=505377.
Dont worry, what you have done is easily fixed, read carefully and follow