I have an XDA11i .
Thanks.
try these...
http://www.freewareppc.com/
-> this is mostly freeware
http://ipaqsoft.net/
-> there's a section for freeware plus under 10 bucks
cheers
a couple more
http://www.freewarepocketpc.net
http://www.pocketpcfreewares.com
Thanks ...anymore ??
Zincubus said:
Thanks ...anymore ??
Click to expand...
Click to collapse
here is a collection of cabs and usefull apps by thormdac...also here is a very good collection by petervbeck
for particular apps try searching with google and mininova for torrents if needed
Check this out http://www.pocketpcmag.com/_top/bestsites.asp
Loads of freeware,themes etc...
check the xda-devs FTP too
instructions can be found in the WIKI
i have a magician too (i just don't use it anymore)...so my experience is best with those links AthenaLod mentioned...because most apps on the xda-devs are for WM5 and 6...
Anybody got an idiot's guide to getting CAB and WinRAR files ontop my XDA 11i ??
Zincubus said:
Anybody got an idiot's guide to getting CAB and WinRAR files ontop my XDA 11i ??
Click to expand...
Click to collapse
not sure what you mean,but use sd card and card reader,or active sync to exolore the device from your pc
when installing cabs use "cabInstaller" it will prevent cabs from being deleted upon installation
and for rars,zips search pocket zip,rar or something like that on the sites from above
thanks anymore
PPCwarez has freeware and cracked apps.
Related
Check out this threat - a bunch of new stuff for WM6 from the Kaiser ROM.
http://forum.xda-developers.com/showthread.php?t=316107
Here's a couple I tested out and am putting into the next rev
Thanks a lot... It was very easy to find your thread using Search...
sry 4 the noob question, but where do i put the files?
man2003 said:
Thanks a lot... It was very easy to find your thread using Search...
Click to expand...
Click to collapse
it's in my sig too
how can i make these into CAB files?
Excuse what may be a daft question but:
Can these be copied over to the device and placed in a folder other that the Windows folder?
The reason I ask is that when trying all the various Touch components it slows accessing my Windows folder down dramatically. (Also slows the device down generally)
There are no ROMS that include these different components for the Charmer.
cheers
im so sorry for bothering but can someone make these files into a cab PLEASE!!
mattk_r said:
Check out this threat - a bunch of new stuff for WM6 from the Kaiser ROM.
http://forum.xda-developers.com/showthread.php?t=316107
Here's a couple I tested out and am putting into the next rev
Click to expand...
Click to collapse
Gald to see that other people are also listening to "Lacrimosa"
lol
hi again
how you doin with your hermes !!
good files, tnx
Matt,
I have successfully installed the new Home plugin using the theloon 4.1 beta, however I can't get the new comm manager to install at all. Any ideas on what I need to do? I don't have touchflo enabled, in case that matters.
I took a quick look at the rgu file - it is very different from the one in the 8B touchflo version. It's also about 140k larger. It doesn't look like it's the correct file.
I don’t know why but I can’t enable the Favorites People tab. There is a registry entry or something else to make this work?
Thanks
Just got my TP last week. ROM version is a WWE. I try putting a pmingliu.ttc into the font folder and unable to read traditional chinese characters in my contacts. Any fix? I would like to keep the WWE ROM because I don't need the CHT menus.
BTW, this is a great community of ppl working on various WM phone. And they say all the developers are going over to iPhone app store. Keep it up.
Peace.
KoreChiThai
Have recently tested the following cab package on WM6.1 devices, Diamonds & Pro's with help of forum members.
This cab installs font & regional settings to support Chinese, Korean & Thai.
Will also work on WM5 devices,
Input SIPs are also included.
Give it a go ! FontPDA KoreChiThai
Anyone also has a working Cab file for adding dutch language support?? Reading is no problem since its normal letters, but I'd like to keep my english rom with autocompletion for dutch.
Hope somebody has a solution for that!
Thanks
Thank you
Mister B said:
Have recently tested the following cab package on WM6.1 devices, Diamonds & Pro's with help of forum members.
This cab installs font & regional settings to support Chinese, Korean & Thai.
Will also work on WM5 devices,
Input SIPs are also included.
Give it a go ! FontPDA KoreChiThai
Click to expand...
Click to collapse
Downloading, Thank you for pointing this app out.
Thai Support
Mister B said:
Have recently tested the following cab package on WM6.1 devices, Diamonds & Pro's with help of forum members.
This cab installs font & regional settings to support Chinese, Korean & Thai.
Will also work on WM5 devices,
Input SIPs are also included.
Give it a go ! FontPDA KoreChiThai
Click to expand...
Click to collapse
How does this differ than the locally available ThaiWinCE software?
Thank you
Mister B said:
Have recently tested the following cab package on WM6.1 devices, Diamonds & Pro's with help of forum members.
This cab installs font & regional settings to support Chinese, Korean & Thai.
Will also work on WM5 devices,
Input SIPs are also included.
Give it a go ! FontPDA KoreChiThai
Click to expand...
Click to collapse
Thanks, Mister B. It works like a charm, I can read and input Trad chinese characters.
Hi!
@jcasplinter:
This has been already covered, take a look at this thread/post:
http://forum.xda-developers.com/showpost.php?p=2786675&postcount=6
After that I suggest you take a look at this other one, if you want to "tweak" your predictive texting (T9):
http://forum.xda-developers.com/showpost.php?p=2786624&postcount=10
BTW, next time try the search tool, you might get your questions answered much quicker than doing the "posting and waiting" routine...
Cheers!
Please let me know how to read korean/japanese in my HTC Diamond CDMA TELUS.
I dont want to flash my rom but would love to have some cab file that will allow me to use T7 English/Korean/Japanese
Thanks. My email is [email protected] and please let me know thanks again
can you re up... the link is deat
thanx in advance
The link for the FontPDA KoreChiThai is dead. Could someone please re-upload the files? Thank you!
Downloaded the FontPDA KoreChiThai.exe file and tried to install this on my Fuze on my storage card. But I keep on getting a error message that says this program is not a valid PocketPC application. Any clues as to why I am getting this error?
adonishui said:
Downloaded the FontPDA KoreChiThai.exe file and tried to install this on my Fuze on my storage card. But I keep on getting a error message that says this program is not a valid PocketPC application. Any clues as to why I am getting this error?
Click to expand...
Click to collapse
try running it on regular windows
adonishui said:
Downloaded the FontPDA KoreChiThai.exe file and tried to install this on my Fuze on my storage card. But I keep on getting a error message that says this program is not a valid PocketPC application. Any clues as to why I am getting this error?
Click to expand...
Click to collapse
run it in windows... choose a folder to extract and all the cabs and instructions will be in that folder.
copy cabs to microsd and install as instructions say
I had trouble initially (on SD and w/out resets), but once installed directly on device with proper attention to resetting after each cab everything works like a charm! This program is so wonderful. Thank you! I have searched and searched and found nothing NOTHING that compares!
Briefly: We are a mixed ethnically European/Korean Christian family learning Korean and I use Pocket E-Sword regularly. Now I can enjoy the Korean bibles as well! Thank you so much!
This cab is nice but has some problems. If I set region to "English(USA)", all programs I installed have no problem to run, and some of programs cannot show chinese properly. If I set to "Chinese", a few programs failed to start. e.g. Microsoft Bing etc. I have CE-Star before, all programs work fine, but it requires to register after a few days. Can someone improve this cab???
Big 5 support
here is what i use on my TP...i can read Chinese (big5) with no prob, sms/opera....etc
just install (uhei00m-gray.cab), HTC Chinese Support
found on post #16 http://forum.xda-developers.com/showthread.php?t=411650&page=2
Cheers!
Where can i find a good reg edit program ?? Have found plenty of good apps, an everyone seems to have a reg edit prog, but where can i find a link !
hello
phm regisstry editor (freeware)works just fine on wm 6,1. just select:"Pocket PC 2002,2003 (ARM/PXA)")
http://www.phm.lu/Products/PocketPC/RegEdit/
frenchromeo said:
hello
phm regisstry editor (freeware)works just fine on wm 6,1. just select:"Pocket PC 2002,2003 (ARM/PXA)")
http://www.phm.lu/Products/PocketPC/RegEdit/
Click to expand...
Click to collapse
November 10, 2002 ??? I´m suspicious !
Need names of good, pay or not reg edit´s also
jonas9000 said:
November 10, 2002 ??? I´m suspicious !
Click to expand...
Click to collapse
Pocket PC but this is a smartphone ?? HTC D2
I use Total Commander (you can find it here if needed http://ghisler.fileburst.com/ce/tcmdpocketmips.cab ).
It's totaly free.
It's also a very good file browser. ie, you can easy make multiple selections with it. And, you can connect to ftp servers too !
If you try it, to go to registry, select //module in root directory...
here bro
infoman68 said:
I use Total Commander (you can find it here if needed http://ghisler.fileburst.com/ce/tcmdpocketmips.cab ).
Click to expand...
Click to collapse
This is a wrong version (though maybe works?)
Website: http://www.ghisler.com/pocketpc.htm
Choose version for Prozessor type "ARM/XSCALE/PXA".
-------------------------------------------------------------------------------------------------------
Alternative - working from PC on your Topaz:
CeRegEditor: http://ceregeditor.mdsoft.pl/index.php?id=1
XRAY MAN said:
here bro
Click to expand...
Click to collapse
thanks pal, let´start some edit then !!
it worked fine for me (phm) and i do have a d2.
Please have another device . imate jamin Internal Memory is few How can I install is themes naong MobileSense 3.5.2.20091229.en and spb shell in memory card .. than you
It's not possible to install these to the storage card, unfortunately .
Livven said:
It's not possible to install these to the storage card, unfortunately .
Click to expand...
Click to collapse
Thanks for the quick reply,
But this program spb and the themes taking high memory ,Is no other way
Hmm, you could try Androkkid, FEWidgets, iPhoneToday, ThrottleLauncher, rlToday, Homescreen++ or whatever... there are many other good programs out there, just search here .
Livven said:
Hmm, you could try Androkkid, FEWidgets, iPhoneToday, ThrottleLauncher, rlToday, Homescreen++ or whatever... there are many other good programs out there, just search here .
Click to expand...
Click to collapse
Thank you, ThrottleLauncher this App. it's best but 3 Months , Suggested to him that the last alternative spb , thank you
No problem, hope some app will suit you .
But, please post in the correct sub-forum, for example in Questions & Answers; this one is for theme releases only .
I couldn't find this anywhere so I assume no one has posted something like this before.
I flashed my HD2 to Miri's v1.2 ROM and found out I didn't have JBlend anymore. Since I could't find any other JVM that could run Opera Mini as good as JBlend (at least visually) I tried to use the package that came with ROM 1.48 and make a CAB. Unfortunately it didn't install. I removed all the files from my CAB and left the registry parts in it and it installed. I did try to apply the registry changes by importing the reg files but there seemed to a problem and all the 3 registry editors I used said "import finished" and nothing was imported. The CAB however does the job.
So for anyone trying to have the JBlend version that came with the HD2 without flashing another ROM, try this:
1. Unzip all the files in the .zip file to \Windows
AND
2. Install the attached CAB (on the device)
To get the shortcut in start menu, create a shortcut called "JBlend.lnk" pointing to "\Windows\JBlend_AMS.exe" and place it in "\Windows\Start Menu\Programs\Tools"
(or wherever you want, only, the nice .png icon won't show if it's not in Tools)
Update (March 31st, 2010)
I replaced the files with the ones from the JBlend version that comes with the HD Mini (Photon). Now there's no problem with screen alignment in 6.5.X ROMs anymore.
Thanks a lot!
This solved my problem!
Great! I was looking for this for quite a while. Will test this and report back
dear mighty,
you're such a great friend, always helpful
tnx
manuelcalavera said:
dear mighty,
you're such a great friend, always helpful
tnx
Click to expand...
Click to collapse
You're most welcome
Dear mightymn
Thanks a lot
------------
Note: I am mehrdad
Mehrdad201 said:
Dear mightymn
Thanks a lot
------------
Note: I am mehrdad
Click to expand...
Click to collapse
Will be happy if I can help!
Try it and let us know if it worked
thank,s for dear mighty
Dear mightymn
I tried your solution for this issue.
But unfortunately, it didn't work on my phone.
do you have any other procedure for installing JBlend or the other JAVA environment?
Forgive me if im being stupid, but what is Jblend? I just googled it and it seems to be a Java program but thats all I know!
Thanks.....
mightycaz said:
Forgive me if im being stupid, but what is Jblend? I just googled it and it seems to be a Java program but thats all I know!
Thanks.....
Click to expand...
Click to collapse
it lets u run java programs on windows mobile
you guys can try out this too!
is working on my Miri's ROM.
It creates an icon for Opera Mini, making it work like an app.
however, it is buggy sometimes. When u change the input to full screen edit, you cannot press OK or Cancel after typing. This is the only major issue i faced so far.
Mehrdad201 said:
Dear mightymn
I tried your solution for this issue.
But unfortunately, it didn't work on my phone.
do you have any other procedure for installing JBlend or the other JAVA environment?
Click to expand...
Click to collapse
hum... what exactly is the porblem?
make sure you copy all the files from the .zip file to your \Windows folder and then install the cab, soft reset and now you should be able to run JBlend_AMS.exe from the windows folder.
can anyone else also try this?
thanx!
note: Now I tried it on microsoft's winmo 6.5 emulator and it works there :-?
Dear mightymn
In the other forum, I explained my problem.
I registered a visitor message there. Please read them as soon as you can.
Mehrdad201 said:
Dear mightymn
In the other forum, I explained my problem.
I registered a visitor message there. Please read them as soon as you can.
Click to expand...
Click to collapse
Dude at least copy and paste the message into here and see if any one else has an idea..........................
I am very glad to say
"Problem is solved."
Thanks my friend.
Mehrdad201 said:
I am very glad to say
"Problem is solved."
Thanks my friend.
Click to expand...
Click to collapse
really? great!
yeah, really
It works and definitely it is better than the other java softwares.
It does work for mine
Hi, Mighty, got to thank you for the sharing. It works perfectly for mine and has resovled a big problem after I had flashed my rom.
Opera Mini works again on Miri 2.3 ExtraLight Rom.
Thank you very much Mr. mightymn.