Hello,
I have extract the new radio from orange UK rom
Rapidshare link --> Here it is
And Vox USPL -->Here
how about results? has anything improved after flashing it?
lerameur said:
Hello,
I have extract the new radio from orange UK rom
Rapidshare link --> Here it is
And Vox USPL -->Here
Click to expand...
Click to collapse
Thanks, radio flashed.
Maybe no many change but that's the last one...
Thanks for the upload. I have updated, haven't noticed any changes.
Thanks a lot, I've updated it!
thank you!
If i press FLASH.exe, does it rewrite the rom over my 6.1 ROM?
Or will it just flash the radio(nothing else)?
It will just flash the radio, don't worry
Mine says it's corrupt. Running flash.exe from windows.
I reverted back to Radio 4.1.13.54_03.10.90.
I had some issue making calls and receiving them.
I also noticed 2 calls I received did not connect for some reason. I'm not in my home country so it might have been a network/roaming issue - but I'll be going back to .54 also Is it possible to flash RADIO from SD? I should simply be able to rename to vox0img.nbh and get into bootloader to do so, si?
Tnx.
No problem here.
is it only for uk or can be used in any country? (i am in india)
also, how can i backup my old radio in case anything goes wrong?
h4waii said:
I also noticed 2 calls I received did not connect for some reason. I'm not in my home country so it might have been a network/roaming issue - but I'll be going back to .54 also Is it possible to flash RADIO from SD? I should simply be able to rename to vox0img.nbh and get into bootloader to do so, si?
Click to expand...
Click to collapse
That should work without a problem!
whats this do? Vox doesnt have a radio :s
by "RADIO" people here are discussing about the portion of the firmware which handles the tx/rx hardware of the vox...and not about the FM/AM radio.
again, what does it do?
the "radio" is responsible for making and receiving calls. its the basic piece that makes your phone, a phone.
it updates the firmware of the GSM radio module which is responsible for making GSM/GPRS calls/messages.
Related
Sorry if this is a real [email protected] question but I want to upgrade my (MDA Compact alike) Orange M500 but only the radio version is this possible? I can't seem to find a procedure on how to do this.
1. decompress the rom file(it's a exe) with Winrar.
2.U will find 3 nbf file.
3. remove 2 of them EXCEPT the radio).nbf
4. perform the update
Thank you for your response! already thought so but just wanted to be sure! thanks again!
AFAIK this is not possible.
The only optional part during an upgrade is the Extended ROM for a Himalya (dont know the effects for Magician).
If you only supply the radio nbf, you will end up with a non-functionin device.
@edsub: You're wrong in case of the Magician.
@rvbcrs: Do as jackleung said - it will work flawlessly, because I did this myself already.
Also, if you upgrade/downgrade radio only, it will not erase your "big-storage" ROM!!
jehlinger said:
Also, if you upgrade/downgrade radio only, it will not erase your "big-storage" ROM!!
Click to expand...
Click to collapse
thks for the tip, indeed the bigstorage ROM remains after radio 'only' upgrade.
Just upgraded to (Qtek) radio 1.12, although haven.t seen any differences with 1.11.
thks
what exactly is the radio used for?
reallly stoopid questions.. but
what exactly is this radio ROM used for?
is it as it's name suggest.. can i get radio fm/am from this?
Radio upgrade
Has anyone tried the 1.13 radio upgrade?
i upgraded last night, did a single radio upgrade with out upgrading the system rom.
Imp
Folks, is it possible to to flash the radio from the excalibur onto a tornado ? I've extracted the radio from the nbh but just wondering what to do next or whether its worth trying this ?
i dont mean to be rude, but, is there something wrong with you?!
you risk killing your phone by flashing ANY part of a rom to one which is not designed for your phone! just play it safe and keep it to tornado only updates! as far as i know, there isnt any way to fix a corrupted radio rom update.
mingw said:
Folks, is it possible to to flash the radio from the excalibur onto a tornado ? I've extracted the radio from the nbh but just wondering what to do next or whether its worth trying this ?
Click to expand...
Click to collapse
No.
That was easy, wasn't it?
IMHO previous ones were wrong If YOU want to make an experiment and if you UNDERSTAND, that this can corrupt your device - than you of course can! I know situation when Tornado user flashed RADIO from communicator, by using COMMUNICATOR flashing software No troubles, everything, that was to be done - is to flash radio by means of Tornado flasher - and everything was OK!
I.e. - in one thread user post link to Radio 1.20.00 - number is NOT Tornado Radio one, am I right? Still, this radio works perfectly on my Qtek 8300
So I think that the main point - is to use Tornado Flasher to flash any part of our devices. If you don't play with IPL/SPL - everything IMHO may be undone safely!
Good luck! And please, share us link to Excalibur Radio
Aha, this i link to post with radio 1.20.00 updater
http://forum.xda-developers.com/showpost.php?p=1256578&postcount=7
Whats the RIL version of your Tornado and Excalibur? if they're both 2.002 then it may be OK to flash, same with the vox etc... Just as long as you have it in the proper NBF format required by the tornado...
However it'd be best to run the following command via mtty first:
Code:
r2sd GSMDATA
This will backup your IMEI and radio tuning etc in the event of it all going horribly wrong.
If it does go wrong, reflash a tornado radio, then reflash your GSMDATA from the card backup you took.
Phil
Does anybody has this Radio-Rom and could send me, or post ist?
care to explain where you got this version?
It's the German one I think.
i did notknow they had a german rom available with that radio version please post a link!
Rom version: 1.56.404.6
Rom date 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07W
Its the latest version, i think mine will have it when its delivered back from the repair center. Have some issues with the camera and the speaker thingy. Friend of mine has this radio version on his monday morning HTC TyTN (also had it repaired)
Bouloama said:
Rom version: 1.56.404.6
Rom date 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07W
Its the latest version, i think mine will have it when its delivered back from the repair center. Have some issues with the camera and the speaker thingy. Friend of mine has this radio version on his monday morning HTC TyTN (also had it repaired)
Click to expand...
Click to collapse
Could you post this version?
schroepfer said:
Could you post this version?
Click to expand...
Click to collapse
You can't dump the radio image from the device, it must be stripped from an operator released upgrade utility.
I have the Radio 1.27.12.32 on my phone. I bought it in Germany.
If there is a possibility to extract it, I will do...
I also have this radio ROM, got the TyTN II from expansys today.
Any possibility of getting this Radio? Would like to try it out.
Ok I quite the newbie so I hope you can bear with what might be a stupid question. First let me say that I love this site and all you guys are great. I use a Mac with OS X so there is no way I can run some of the tools recommended for ROM stuff.
I would however like to take my TyTN II from radio 1.27.12.11 to 1.27.12.17.
I downloaded from http://www.cinetsystems.com/ the KAIS_Radinly_1.27.12.17_CustomRUU.rar, and it expands into an RUU_signed.nbh and a CustomRUU.exe . All I have to do is run the .exe to flash the radio? It will not wipe out the data on my device? Do I need to copy both files to the TyTN II or is the .exe self contained?
micronauta said:
Ok I quite the newbie so I hope you can bear with what might be a stupid question. First let me say that I love this site and all you guys are great. I use a Mac with OS X so there is no way I can run some of the tools recommended for ROM stuff.
I would however like to take my TyTN II from radio 1.27.12.11 to 1.27.12.17.
I downloaded from http://www.cinetsystems.com/ the KAIS_Radinly_1.27.12.17_CustomRUU.rar, and it expands into an RUU_signed.nbh and a CustomRUU.exe . All I have to do is run the .exe to flash the radio? It will not wipe out the data on my device? Do I need to copy both files to the TyTN II or is the .exe self contained?
Click to expand...
Click to collapse
HALT Noob. Read the rom upgrading instructions first. You must first load "Hard SPL" which will protect you from bricking your phone and allow flashing roms. You need a functional active sync connection to the phone to do this. XP is best, Vista works as well.
After this is done, then yes you would simply extract the two files into a folder and run the exe file. It would then flash the radio only and not effect any of your files or operating system.
Flashing radios takes about 5 minutes when all goes well.
There is a Russian version which includes this Radio
http://rs27.rapidshare.com/files/69....5_radio_sign_22.45.88.07_1.27.12.32_Ship.exe
I hope someone can work out how to strip the radio out.
A
adamcullen said:
http://rs27.rapidshare.com/files/69....5_radio_sign_22.45.88.07_1.27.12.32_Ship.exe
I hope someone can work out how to strip the radio out.
A
Click to expand...
Click to collapse
Thanks! So we have a choice to flash this radio on our device!
Ok, I've downloaded and extracted the ROM. 4 files,
00_Unknown.nb
01_SPL.nb
02_MainSplash.nb
03_OS.nb
was expecting to see a 05_GSM.nb but as 00_Unknown.nb was the correct size (16.7Mb) I've used that one and packaged it.
Try it here...
http://rapidshare.com/files/74644941/KAIS_Radio_Only_1.27.12.32_CustomRUU.zip.html
I'll give it a go
Seeing as I've flashed my phone about 15 times in the past 24 hrs to try to [email protected] around and get the bluetooth stack working properly, one more cant hurt!'
Downloaded ... flashing now
A
Can someone very that this works,
Flashed
Done Dutty,
checking results now.
A
adamcullen said:
Done Dutty,
checking results now.
A
Click to expand...
Click to collapse
Thanks I will have a go and test it on my t-mobile uk network.
Done
Flashed with no probs.
outbound calls work ... seems to be ok.
Going to check if it has improved bluetooth pairing in my carkit.
A
Hi, I have a Tilt with PDA Corner Ultimate V.10,
Hard SPL 3.29,
and radio 1.27.14.09 (AT&T Stock)
The radio is causing the phone to have no sound, but everything else works fine. I know this problem is common, but I have tried everything within my ability and cannot get it to flash to any other ROM or radio.
When flashing a new ROM or radio, it shows the current version and update version, but never gets past 0% without a 262 error
I have tried all of the solutions I found posted on the forum, (Jump SPL, MTTY, EVERYTHING) trust me i've searched and read and searched more, I am not a newb to this although my post count is low.
Is there anyone with this particular problem on this particular ROM/radio combination that can help me out?
da_truth540 said:
Hi, I have a Tilt with PDA Corner Ultimate V.10,
Hard SPL 3.29,
and radio 1.27.14.09 (AT&T Stock)
The radio is causing the phone to have no sound, but everything else works fine. I know this problem is common, but I have tried everything within my ability and cannot get it to flash to any other ROM or radio.
When flashing a new ROM or radio, it shows the current version and update version, but never gets past 0% without a 262 error
I have tried all of the solutions I found posted on the forum, (Jump SPL, MTTY, EVERYTHING) trust me i've searched and read and searched more, I am not a newb to this although my post count is low.
Is there anyone with this particular problem on this particular ROM/radio combination that can help me out?
Click to expand...
Click to collapse
Maybe this is another one of those 'Radios from Hell' that won't let you upgrade. Note this quote from Ultimate Radio Thread:
Originally Posted by jockyw2001
A new sort of "Radio from Hell" emerged for the Diamond. See here. It combats rom updating by preventing us from running a SSPL.
A clear advice to all is: always make sure you have HardSPL installed and your device is security unlocked before installing a new radio !!
Also, maybe something in this thread will help you...
http://forum.xda-developers.com/showthread.php?t=393337
Thanx for your quick reply. I was thinking along the same lines, but I installed HardSPL just fine and flashed to the PDA corner ROM with no problem, the problem arose when I figured out that the radio was causing the phone to have no sound and wanted to update it..which of course did not work. Right now I am trying the stock ROM with the same radio to see if it will allow me to flash it...
da_truth540 said:
Thanx for your quick reply. I was thinking along the same lines, but I installed HardSPL just fine and flashed to the PDA corner ROM with no problem, the problem arose when I figured out that the radio was causing the phone to have no sound and wanted to update it..which of course did not work. Right now I am trying the stock ROM with the same radio to see if it will allow me to flash it...
Click to expand...
Click to collapse
That's why I'm thinking you may have flashed a 'Radio from Hell' which is preventing any further ROM updates. Maybe something in the RFH thread I linked to can help...
Good luck!
Ok, this is a radio from hell, i found some information on it stating that when it is used with any other ROM, sound will not function. Now I am trying to revert back to the orignial ROM but I have a new problem, I cannot find the original rom for this phone (AT&T aku 0.4.4 build 18128 radio 1.27.14.09) in working condition. There is only one link to it and the file is corrupted(rapidshare). is there anyone with this operating system that could send me a link that is NOT the one posted on XDA: (http://forum.xda-developers.com/showthread.php?t=341886). Thanx to drtolson, and thanx in advance to anyone else who is brave enough to get involved.
(Drtolson, I want to try the techniques on the post you sent a link to, but it states that the steps only work with that particular radio and others have not had any success using it with any other radios.)
da_truth540 said:
Ok, this is a radio from hell, i found some information on it stating that when it is used with any other ROM, sound will not function. Now I am trying to revert back to the orignial ROM but I have a new problem, I cannot find the original rom for this phone (AT&T aku 0.4.4 build 18128 radio 1.27.14.09) in working condition. There is only one link to it and the file is corrupted(rapidshare). is there anyone with this operating system that could send me a link that is NOT the one posted on XDA: (http://forum.xda-developers.com/showthread.php?t=341886). Thanx to drtolson, and thanx in advance to anyone else who is brave enough to get involved.
(Drtolson, I want to try the techniques on the post you sent a link to, but it states that the steps only work with that particular radio and others have not had any success using it with any other radios.)
Click to expand...
Click to collapse
I got the File from Rapid share and extracted the NBH and it seems fine.
Jonathan.Parker2005 said:
I got the File from Rapid share and extracted the NBH and it seems fine.
Click to expand...
Click to collapse
ok thanx, I'm downloading it again to see if it works...
Ok, i re-downloaded the file and it worked and also successfully flashed back to the original ROM, I probably won't be able to flash it to another custom ROM but at least the sound is working and the phone is fully functional. THANX TO EVERYONE FOR YOUR HELP!
Hello everyone..Im newbies here.I lost my radio when trying to upgrade to cotulla`s rom.Here is brief explanation on what i have gone through.
-i use magician(02 xda ii mini)with default wm2003se and 1.11 radio.
1.I try to upgrade to cotulla`s 03 wwe where its need 1.12 radio version
2.I flash the radio using MusikMonk instruction in upgrd radio 1.12x thread.
3.1st i use usb flashing method and receive annoying 141 error.
4.I move to SD flashing method where i notice the radio have lost from my device.(red text in start screen show only wwe info istead of other before/there is no radio info in device information in os)
5.I try all other radio installation in ftp and receive same 141 error.
6.follow MusikMonk advice by backup the current os using romupdateutility and got the .nb1 file.-read using ntrw in cmd.
7.copy the 416byte header and edit to radio (.nb1) file attached in MusickMonk instruction.write to sd card but when try to flash in bootloader receive section=1 not allow update!.
8.Try same method with different radio file i found in ftp(I convert .nbf to .nb1 using nbfdec)
9.again stuck when flashing(section=1 not allow update!.)
10.try to update with shipped rom but receive 141 error(stuck in 50%/step 1:updating radio.Since i think i have no radio this error occur)
11.still going around with other radio file->convert->edit->flash->stuck...
I still browsing around this forum to find solution.Got fever because its exhausting me..i need to done this fast since this is the only phone i have and cant afford other.
So.I really need everybody expertise and advice especially for those have experience with this problem..Really need all of u.Thanks for view.
p/s:thanks for kind guys,MusikMonk who help me much in his thread..
plis forum expert,i need your help..
you try download WWE_04 include radio 1.12 and flash this rom.
Look http://forum.xda-developers.com/showthread.php?t=514864.
there is where i lost my radio daley.Upgrade with wwe 01,02,04 still wont work.stuck in 141 error.(i have no radio,i think what the heck can those rom upgrade?)
before wwe3.03 installing your pda call normal? but with 2003SE and r1.11 shiprom, radio still work? try other no success. I think you have a pda with damage radio hardware
before it try to flash the radio,my magician work normally as it is..
Hi,
is your battery ok? I've just the same problem to flash a radio... the battery seams OK, but it's too old. I've inserted a new one from my other xda mini, and the flash works well.
Try again with a new battery...
So long,
MrFX
mistereffiks said:
hi,
is your battery ok? I've just the same problem to flash a radio... The battery seams ok, but it's too old. I've inserted a new one from my other xda mini, and the flash works well.
Try again with a new battery...
So long,
mrfx
Click to expand...
Click to collapse
谢谢!谢谢!谢谢!谢谢!