Hello,
when I switch on my device sometimes all programs accessing the SD-Card will be suddenly terminated. This occurs with some of the WM6.1 builds I flashed but not with all. I use a 8GB SDHC Card. Any Ideas ?
Related
I received a Qteck 9090 to replace my Qteck 2020.
I have installed tomtom5, but when i launch it, it freeze 5 sec and hang off.
I have a 1gb sd card from dane-elec. when i remove it and launch tomtom, i have a screen, map not found, but tomtom seem working.
Can you help me :?:
I found !
The sd card need to be formated in ntfs.
Hello,
I tried different versions of Windows Mobile 2005 for Windows Mobile, but with every one of them Tomtom (5.21 and 6.00) behave unstable, e.g. they crash everytime I try to use the GPRS connection (for traffic services etc.). Has anyone else experienced this behavior?
Greetings,
Andreas
SD card issue
I spent months getting my xda2i working with tomtom5 after I upgraded from tomtom3. The fix for me was to replace my sd card for an MMC card and this did the trick. I use the "PNY 2Gb MMC" card. Note MMC cards work in place of SD cards on xda devices.
Hi Everyone,
Does anyone know of an app that makes the 'My Device' a drive for the computer, like WM5torage does with the memory card?...Or a program for the computer that recognises the device as a drive?
Thanks
Hi,
you can use WMStorage for this, just change the device in WMStorage from "MemoryCard" to the other option.
Best regards,
tsfnet
tsfnet said:
you can use WMStorage for this, just change the device in WMStorage from "MemoryCard" to the other option.
Click to expand...
Click to collapse
thanks, but this didn't work for me, it just freezes my phone.
Hmmm
Unlike ActiveSync, WM5torage requires exclusive access to the storage medium. When you select Storage Card in WM5torage to be used as a USB Mass Storage device, the PPC looses access to it. If you have a program running from the Storage Card while trying to activate WM5torage you get an error message saying that the Storage Card is in use by an application and that it must be shutdown before WM5torage initiates access to the Storage Card.
Since the OS runs off the PPC Non Volatile memory, I don't think it is possible to get WM5torage to use the phone memory as a USB Mass Storage Device.
Not to mention that mostly "internal" file system uses special customized file systems - not FAT or NTFS, so even if drive is exported, windows are unable to actually see files on it.
Though I think it was reported somewhat working an at least one device (the one that had FAT as internal FS i presume), but it had to be done carefully and after device needed to be rebooted anyway, as OS lost connection to some vital data files during dismount.
Hi, I am new to the PDA world. I have downloaded the sdhc.cab and installed on my AT&T Treo 750, WM5, it identified a 4GB Kingston Mini SDHC memory card. It works great.
But I can no longer see memory card (Treo reports no memory installed) once after turning on phone from sleep mode or the display gets off. Only way to get it identified is to un-plug and re-plug SDHC card into the slot. Is there any fix for this. Please help me.
Thanks
teleguru said:
Hi, I am new to the PDA world. I have downloaded the sdhc.cab and installed on my AT&T Treo 750, WM5, it identified a 4GB Kingston Mini SDHC memory card. It works great.
But I can no longer see memory card (Treo reports no memory installed) once after turning on phone from sleep mode or the display gets off. Only way to get it identified is to un-plug and re-plug SDHC card into the slot. Is there any fix for this. Please help me.
Thanks
Click to expand...
Click to collapse
Upgrade to ATT WM6 2.25 and enjoy.
Thank you reyjabs.
Hi, just got my x7510 a few days ago. Its going to replace my laptop.
But I have a slight problem. When I connect the X7510 as a mass-storage device only the inbuilt flash drive (16GB) shows up but the memory card doesnt. How do I make that show up ? And not via Activesync but as mass-storage.
Thanks for helping in advance !
what version of windows are you running?
also ever tried wm5 storage? you can use it to select hard disk or memory card as the pass through device for usb mass storage
it only grumps if a program is holding access to the device
eg: today plugin using storage card as it's home and has open files being used.
also known as file locking, same as windows
t works fine on my x7500 (ameo)
StashCompInc said:
Hi, just got my x7510 a few days ago. Its going to replace my laptop.
But I have a slight problem. When I connect the X7510 as a mass-storage device only the inbuilt flash drive (16GB) shows up but the memory card doesnt. How do I make that show up ? And not via Activesync but as mass-storage.
Thanks for helping in advance !
Click to expand...
Click to collapse
there is a registry setting you can alter to make the sd card the mass storage device
search on the athena forum as it was mentioned in the wm5storage thread I think
whoops cyberjack is right
The registry setting was for usb to pc
change the settings "USB to PC"
on ameo16gb you can switch settings from ActivesSync to Mass Storage without change registrykeys
xacsx said:
change the settings "USB to PC"
on ameo16gb you can switch settings from ActivesSync to Mass Storage without change registrykeys
Click to expand...
Click to collapse
Yes but what he wants is to use the sd card as the mass storage device instead of the default SSHD
WM5torage works but its slow. 1MB/s only.
Suggest you give this a try... works great on my 7510.
http://www.nuerom.com/BlogEngine/page/nueMassStorage.aspx
look for USB to PC
StashCompInc said:
WM5torage works but its slow. 1MB/s only.
Click to expand...
Click to collapse
This may be in the settings/system tab and is a lot faster but you may have to do a registry change
have a look in advanced config 3 to see if it can be changed there easily
storage card problem
i inserted a mini sd on x7510 i went to view documents on there it dosent show anything the x7510 dosent know the card is there
If you open File Explorer and navigate to My Device, can you see Storage Card in the folder tree? If so can you open the tree to see your documents?
If so, I can't see any reason why Office Mobile won't pick them up. If not, there may be a problem with either the MiniSD card, or the card slot. Which document types are you opening? For instance, if you have an Excel file in your MiniSD card, open Office Mobile/Excel then at the top of the screen tap the Folder list and select 'All Folders' to see if it picks the file up. This works fine on my X7510
Format the miniSD card with your PC
StashCompInc said:
Hi, just got my x7510 a few days ago. Its going to replace my laptop.
But I have a slight problem. When I connect the X7510 as a mass-storage device only the inbuilt flash drive (16GB) shows up but the memory card doesnt. How do I make that show up ? And not via Activesync but as mass-storage.
Thanks for helping in advance !
Click to expand...
Click to collapse
Take out the miniSD card, slot it into your laptop and format it to FAT or FAT32 and insert back into the X7510.
rsawoseyin said:
Take out the miniSD card, slot it into your laptop and format it to FAT or FAT32 and insert back into the X7510.
Click to expand...
Click to collapse
This was a very old thread, and the problem was answered to an extent!
The OP didn't have a problem with the X7510 seeing the MiniSD card- he wanted Windows to see it on the PC when connected as a Disk Drive rather than activesync. By default, Disk Drive connectivity sees the flash disk not the MiniSD.
There is a registry hack to change this, but the easiest answer is to use WM5torage which can be set to see either.
viewing files
i inserted a sd card in my x7510.but dont know how to view the files from the device.when i go to programs it shows flash disk and device programs
it says oper9
when i enter it it says opera9.storage card.it says the same thing even if theres no sd card inserted