Did a search, but can't find anything here. Can anyone help?
I want to chnage the internet explorer luanch icon to launch operah instead of the packaged IE.
Cheers
you can use this program to change all:
Cheers man.
Settings....
So, do you load the cab and the exe onto the phone?? or run the exe from your PC?
First install the cab on your device and then copy the exe file to the installation directory and replace the old exe file there.
The reason is that the exe file from the cab is already expired so you have to replace it after the installation.
This is fine for the 3 normal sides but on the O2 Cube their are 4 sides, I have these as the pre-loaded Co-Pilot, Yahoo etc etc is there a wayt o change these?
nicko666 said:
This is fine for the 3 normal sides but on the O2 Cube their are 4 sides, I have these as the pre-loaded Co-Pilot, Yahoo etc etc is there a wayt o change these?
Click to expand...
Click to collapse
So what?
You can use the touchsettings for the 4 sided cube too to change the icons and programs.
Or do you to delete one side?
yup - i just used this to change the 4th side CoPilot link to a TomTom link
Thanks for the info works a treat!
[Renegades] MossY_DoG
www.blighty-renegades.co.uk
gerald_s said:
So what?
You can use the touchsettings for the 4 sided cube too to change the icons and programs.
Or do you to delete one side?
Click to expand...
Click to collapse
Another example of user putting foot in mouth - just realised how to do the app2 bit!!!
Great app now have all 4 sides how I want them!!!
Related
These themes are breathtaking. Very good. Found em on the net. Thought I'd Share.
You need Macromedia Flash Player 6.0 -- v7.0 will Not Work!
Run the .exe file from your computer while Activesynced to your phone. Then copy and paste the remaining .tsk files to your windows folder thru Activesync. Open Today screen settings and check them all out. Really Professionally done.
Total of 9 Themes -- They'll all show up in your Today Screen Settings.
They work great on the T-Mobile Wing but should work fine on most other Pocket PC Phones.
Enjoy !!!!
It didn't seem to work on the Cingular 8525 with WM5. I haven't gotten up enough courage to start upgrading.
Works great on my wizard.
Thanks
how can you make it visible on the hole screen instead of only the lower part of screen??
Cheers, Steven
works on my blueangel. one question, how do we change the animation? mine always shows up a plane. and there were a lot of .tsk's that i copied to my phone yet i cant use those.
Steven13 said:
how can you make it visible on the hole screen instead of only the lower part of screen??
Cheers, Steven
Click to expand...
Click to collapse
Thats the problem with Flash Player 7. You need to install Flash Player 6.
zhenius said:
works on my blueangel. one question, how do we change the animation? mine always shows up a plane. and there were a lot of .tsk's that i copied to my phone yet i cant use those.
Click to expand...
Click to collapse
Just go to settings/today screen. They should all be there. Click on the one you want and it will change for you. there are some really nice ones. Just make sure you put all the .tsk files in the windows folder on the phone. Reboot.
zcink said:
Thats the problem with Flash Player 7. You need to install Flash Player 6.
Click to expand...
Click to collapse
Oh I think I know what you mean. If you move the program up in Today settings it will animate the top. On bottom it will animate bottom. The other half it reserves for Date, Clock or other plug ins you have on the Today screen.
hi guys.
anyone knows a good site to download some other good backgrounds this program compatible?
tnx
zcink said:
These themes are breathtaking. Very good. Found em on the net. Thought I'd Share.
You need Macromedia Flash Player 6.0 -- v7.0 will Not Work!
Run the .exe file from your computer while Activesynced to your phone. Then copy and paste the remaining .tsk files to your windows folder thru Activesync. Open Today screen settings and check them all out. Really Professionally done.
Total of 9 Themes -- They'll all show up in your Today Screen Settings.
They work great on the T-Mobile Wing but should work fine on most other Pocket PC Phones.
Enjoy !!!!
Click to expand...
Click to collapse
Can you post the cab instead of exe to install fp6?
hotdog53 said:
Can you post the cab instead of exe to install fp6?
Click to expand...
Click to collapse
I would if I had it. All I've got is the .exe file. Got it off Macromedia's web site. If some can extract the cab and post it, it would be helpful.
I own a At&t Tilt and it works great thank you......is there any database for more tsk. files or to create them
Works great on my HTC P4350. Nice themes. Thanks for sharing. Here's the cab for FP6.
flash themes
nationalicon said:
Works great on my HTC P4350. Nice themes. Thanks for sharing. Here's the cab for FP6.
Click to expand...
Click to collapse
also work on my raphael,more gifs /themes would be nice...anyone!!!!
Hello. I like this thing. but why only the top of the screen is animation? and only these nine themes to good?
I have an HTC touch cruise with the HTC cube !
I would like to remove the cube and have the "SPB mobile shell 2.0" showing up when I slide my finder from bottom to top !!
Is this even posisble ?
Anyone has an idea on how to do it!
Thanks a lot
Dag
I disabled the cube in the registry and just used Mobile Shell's default top-to-bottom drag to activate, but yeah...it'd be neat to be able to swipe from the bottom up to activate Mobile Shell. Email them and ask for it to be added -- perhaps we'll get it in 2.1...
kevsteele said:
I disabled the cube in the registry and just used Mobile Shell's default top-to-bottom drag to activate, but yeah...it'd be neat to be able to swipe from the bottom up to activate Mobile Shell. Email them and ask for it to be added -- perhaps we'll get it in 2.1...
Click to expand...
Click to collapse
I made a change so a slide up activates mobile shell 2. you need to just vjbrisk - works perfectly.
http://www.vijay555.com/?Releases:VJBrisk
basically, follow the instructions there, the file you're looking for to replace is biotouch.exe (you'll need resco explorer or equivalent as it's a readonly file).
regards
Matt
Yeh, the top-to-bottom drag keeps hitting the phone icon and doesn't work. Hope SPB realises this and changes it.
mattxda said:
I made a change so a slide up activates mobile shell 2. you need to just vjbrisk - works perfectly.
http://www.vijay555.com/?Releases:VJBrisk
basically, follow the instructions there, the file you're looking for to replace is biotouch.exe (you'll need resco explorer or equivalent as it's a readonly file).
regards
Matt
Click to expand...
Click to collapse
Could youplease explain what you did step by step, thanks!
Need help
How do I add a City to this Tab in the Picture
Need to add more Citys in Spb Mobile TIME tab
Please do help
What exactly to do if I wanna replace HTC aplication with SPB mobile shell? I have a Polaris and I want to replace default HTC shell. So it is necessary to disable HTC Cube, HTC Today and anything else? And how about it? Thank you very much for an answer.
mattxda said:
I made a change so a slide up activates mobile shell 2. you need to just vjbrisk - works perfectly.
http://www.vijay555.com/?Releases:VJBrisk
basically, follow the instructions there, the file you're looking for to replace is biotouch.exe (you'll need resco explorer or equivalent as it's a readonly file).
regards
Matt
Click to expand...
Click to collapse
it would be nice, to know, exactly, howto ;]
Has anyone else been successful at getting this to work.
I looked on the website and can't figure out how to exactly do this.
Thanks.
search for "motbuttons cube disable" in this forum.
some people report problems with gestures in sms.
instead of gfinder try touchcommander to replace files
in some devices (mine), instead of startAppList look for startupbiotouch.lnk.
good luck !
Hi,
Anybody know what cab and procedure to change the top bar black and white icons to colorful one?
thanks
paty said:
Hi,
Anybody know what cab and procedure to change the top bar black and white icons to colorful one?
thanks
Click to expand...
Click to collapse
Well..... wrong place to post this but, it either needs to be cooked into the ROM or you can buy Wisbar advanced!
Actually it doesn't need to be cooked in. You need resco explorer and the DLL/MUI/BMP files. use active sync to copy them to your cell to like your "My Documents Folder and the use Resco explorer to copy them to your /windows directly. You'll need to run SDKcert and a registry fix cab first though for the new files to work. Everything is in this thread http://forum.xda-developers.com/showthread.php?t=437307. Make sure the onces you download are qvga though. That thread is for a vga device and most files are in VGA format. I've been playing around with them already.
Cab file
Here you go:
http://forum.xda-developers.com/showthread.php?t=475900&highlight=icons
it says for prophet but I have it working on my kaiser
Thread Closed.
Question answer (and not ROM development related).
Ta
Dave
I have been trying to find a way to use the minilla2d on my treo 700wx. I did manage to get it parcially install utilizing http://forum.xda-developers.com/showpost.php?p=2841354&postcount=175 step-by-step. I also had to use the xda-developer-m2d.cab off freeppcsoftware and another cab (which I cannont find the link for) that was a patch for non-htc phones.
My issue is the screen size is two long and the widget slide icon bar at the bottom of m2d does not display. Is there a way or can some with better skills cook an install that fits the 320x240 700wx screen? I assume this is possible because a similar widget bar is used at the bottom of icontacts. There is also a m2d for the kiaser which is suppose to have the same screen size. Any assistants would greatly be appreciated.
rfrogman said:
I have been trying to find a way to use the minilla2d on my treo 700wx. I did manage to get it parcially install utilizing http://forum.xda-developers.com/showpost.php?p=2841354&postcount=175 step-by-step. I also had to use the xda-developer-m2d.cab off freeppcsoftware and another cab (which I cannont find the link for) that was a patch for non-htc phones.
My issue is the screen size is two long and the widget slide icon bar at the bottom of m2d does not display. Is there a way or can some with better skills cook an install that fits the 320x240 700wx screen? I assume this is possible because a similar widget bar is used at the bottom of icontacts. There is also a m2d for the kiaser which is suppose to have the same screen size. Any assistants would greatly be appreciated.
Click to expand...
Click to collapse
I would assume
17. Copy and paste all the files from Folder Step Two to device \windows directory
Click to expand...
Click to collapse
Is having you copy the resized skin files into the right place.
Disable TF2D from your today screen and copy the files over, then soft reset and enable it.
Edit: yes, download finished, you need to copy the files from "Step Two" Into your /Windows DIR, or the skin will be the wrong size.
Edit two: woops didnt notice your screen rez, pick any QVGA skin from the M2D skins thread in D&H and paste the files into /windows or use one of the M2D customiser skins, again QVGA.
veyka,
Thank you. I did copy the files to my \windows folder. Thank you for clarifying that I need to do the same thing using a QVGA theme.
Hello, i want to customize my touchflo, i used SPB shell 3.5 but its bugged, and didnt work the SMS/Email button so i back to toucflo. My ask is: is there any program to change my toucflow bar? for example i use opera 10, and the toucflow open opera 9...
and i want to take some special icon... tcmp etc..
thanks a lot
First install M2DC. With this app you can change the default browser. After that install "I C Thru U". This one let's you make "transparent" the operator, taskbar, bottom bar, etc. at your choice.
All these apps can be found here in XDA and I know there are some more but I don't remember.
Always make a backup before doing any change to your device (I use SPB Backup).
Hope this help
EDIT: Forgot! With shortcut manager you can edit (i.e change the icon) any shorcut in your device and make new ones.
Exsoul said:
First install M2DC. With this app you can change the default browser. After that install "I C Thru U". This one let's you make "transparent" the operator, taskbar, bottom bar, etc. at your choice.
All these apps can be found here in XDA and I know there are some more but I don't remember.
Always make a backup before doing any change to your device (I use SPB Backup).
Hope this help
EDIT: Forgot! With shortcut manager you can edit (i.e change the icon) any shorcut in your device and make new ones.
Click to expand...
Click to collapse
Thanks dude, the M2dc work, and i solve the Opera problem, BUT, the I C thru U have a "big" problem. when i start the program its freeze, and write someting about internet framework :-\ its too old i think. If u can, write some idea to fix it
thank a lot.
Bucsek said:
Thanks dude, the M2dc work, and i solve the Opera problem, BUT, the I C thru U have a "big" problem. when i start the program its freeze, and write someting about internet framework :-\ its too old i think. If u can, write some idea to fix it
thank a lot.
Click to expand...
Click to collapse
You need to install NETCF3.5
VirusPlus said:
You need to install NETCF3.5
Click to expand...
Click to collapse
Thanks but where can i find the netcf3.5 for smartphone? i only find a 30mb size file :-\
okay, i solve it
Another thing about M2DC is you can edit the today buttons under the scroll/sidebar, I've put in the left button a link to G-Alarm and in the right button a link to the file explorer. This can be done in the "Softkeys" tab, just browse the app you want link and name it or just left it that way.
Exsoul said:
Another thing about M2DC is you can edit the today buttons under the scroll/sidebar, I've put in the left button a link to G-Alarm and in the right button a link to the file explorer. This can be done in the "Softkeys" tab, just browse the app you want link and name it or just left it that way.
Click to expand...
Click to collapse
Thanks a lot dude, u are awesome