wm6.1 normal version, downgraded radio only from 1.54.30.10 to 1.54.07.00.
used the kaiser ruu loader and all went good.
after reboot, radio still shows 1.54.30.10
how do i know what radio rom do i really have?
ericizzy1 said:
wm6.1 normal version, downgraded radio only from 1.54.30.10 to 1.54.07.00.
used the kaiser ruu loader and all went good.
after reboot, radio still shows 1.54.30.10
how do i know what radio rom do i really have?
Click to expand...
Click to collapse
you still have 1.54.30.10.
ericizzy1, the available WM6.1 ROMs do not include a radio
Related
How can I tell if my phone is cid-locked, I would really like to change the ROM without the risk of bricking it. Has anyone one tried lokiwiz to cidunlock their phone? any advice would be appreciated. BTW I bought the phone from gray market in Hong Kong and is Vodafone branded, do you think it would be locked?
It came preloaded with Dopod Rom, but I don't like it that much. Also what is the best radio rom, the dopod radio rom is a bit weak.
IPL 2.15.0001
SPL 2.15.0001
Rom vs: 2.15.13.27 WWE
Radio: 02.19.21
Protocol version: 4.1.13.09
Ext ROM: 2.15.13.21
Thanks
locked
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
kenxu said:
you are on G4, so yes you are still CID locked.
Normally when you flash your rom you will know imediately when it try to update.
Click to expand...
Click to collapse
so should I try to flash a rom and see what happens? if it goes through without an error it is cid unlocked? if an error pops up it is locked? Should I try this or should I avoid the risks? Any ROM suggestions? Qtek maybe?
Since your phone is G4 chip, i'm pretty sure you are CID locked. Dont worry about the CID locking for now, GOOD ROMS outthere been using different programs to get around CID locking problem. I suggest you can start with PDAMobiz rom from the other thread. REMEMBER USE G4 program not G3 or other programs. or look for any rom that has NoVender CID in the name.
MDA VARIO II with Dopod WM6
I recently bought Tmobile MDA Vario ii with Dopod Wm6. When it boots it shows dopod sign so I think it is dopod. The ROM is 3.54.707.3.
I want to upgrade to Wm6.1 but Tmobile has only official 3.60.xx rom presently available for download. Can I directly flash any Hermis compatible ROM on MDA Vario II.?
Since it has Dopod WM6 the CID lock must have been diabled I suppose. Am I right? and should I directly flash any HERMIS official or extended ROM? what are your suggestions Thanks
Hemant
I don't know enough about the Hermes and flashing to be certain, but I think you'll need to HardSPL (which bypasses bootloader CID checks) before flashing a ROM.
Take a look at the Hermes sub fora before doing anything though...
Hi,
is it possible to update the bootloader of my himalaya?
i have 1.02 with radio 1.19 and wm5 installed.
i want to upgrade to the newest bootloader.
i didnt found any information about updating it..
hi
can i know where to get the 1.19 radio?
come on! the about called Need Radio 1.19 for hmalaya was 4 posts down the list
http://forum.xda-developers.com/showthread.php?t=292139
ariyani said:
can i know where to get the 1.19 radio?
Click to expand...
Click to collapse
here the 1.19 radio
http://www.buzzdev.net/index.php?option=com_remository&Itemid=100&func=fileinfo&id=293
i still try to upgrade bootloader..
Hey. I've been trying to flash WM6 ROMs to my T-Mobile MDA G3.. I've tried the Crossbow-Reloaded v1.5, Molski's latest ROM on his site, etc. and nothing looks any different after the ROM is installed.. even when i go to settings->about it says i'm running wm5.. something is going wrong. I make sure to CID unlock the phone first.. I've tried flashing the WM6 ROMs with the latest official t-mobile ROM, i've tried downgrading the ROM first.. i've tried everything and nothing seems to work. Is there anything I'm doing wrong? I was up all last night and i got nowhere. Please help.
Thanks,
adam79 said:
Hey. I've been trying to flash WM6 ROMs to my T-Mobile MDA G3.. I've tried the Crossbow-Reloaded v1.5, Molski's latest ROM on his site, etc. and nothing looks any different after the ROM is installed.. even when i go to settings->about it says i'm running wm5.. something is going wrong. I make sure to CID unlock the phone first.. I've tried flashing the WM6 ROMs with the latest official t-mobile ROM, i've tried downgrading the ROM first.. i've tried everything and nothing seems to work. Is there anything I'm doing wrong? I was up all last night and i got nowhere. Please help.
Thanks,
Click to expand...
Click to collapse
what does the os version show on the IPL/SPL screen?
Did you do a clear memory or a hard reset after flashing?
adam79 said:
Hey. I've been trying to flash WM6 ROMs to my T-Mobile MDA G3.. I've tried the Crossbow-Reloaded v1.5, Molski's latest ROM on his site, etc. and nothing looks any different after the ROM is installed.. even when i go to settings->about it says i'm running wm5.. something is going wrong. I make sure to CID unlock the phone first.. I've tried flashing the WM6 ROMs with the latest official t-mobile ROM, i've tried downgrading the ROM first.. i've tried everything and nothing seems to work. Is there anything I'm doing wrong? I was up all last night and i got nowhere. Please help.
Thanks,
Click to expand...
Click to collapse
The key is, when you downgrade did both your IPL and SPL go to 1.xx? Usually only the IPL goes to 1.xx, and you have to downgrade again. Lokiwiz will work if the IPL is 1.xx and the SPL is 2.xx, so you have to verify this. Once you get both down to 1.xx and have run lokiwiz, then (and only then) upgrade to an official 2.xx rom, otherwise you are NOT CID unlocked.
IPL and SPL where both in the 1.xx area before i CID unlocked and then installed ROM..
hi everyone,
i've tried upgraded radio rom from here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
i used the latest one 2.69, after "successfull" upgrade i can't turn my prophet on, actually it switches on, but i can see only splash screen and after few secs it switching off and on itself...
splash shows:
IPL 1.00
SPL 1.00.0000
OS 2.15.13.27
there was also GSM but now isn't
i can switch it into boot loader mode but can't flash new radio rom - no connection, but can flash normal rom... i don't understand it.
no differences after hard reset
any advice welcome
you can try to upgrade your BB's ipl and spl to 2.20 and then flash a latest os rom like 19949 stable and fast,then maybe the problem will be gone... mine is the similar problem like you, on the 2nd screen ,it stopped for almost 10 mins, then it finally turn on...
bulczas said:
hi everyone,
i've tried upgraded radio rom from here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
i used the latest one 2.69, after "successfull" upgrade i can't turn my prophet on, actually it switches on, but i can see only splash screen and after few secs it switching off and on itself...
splash shows:
IPL 1.00
SPL 1.00.0000
OS 2.15.13.27
there was also GSM but now isn't
i can switch it into boot loader mode but can't flash new radio rom - no connection, but can flash normal rom... i don't understand it.
no differences after hard reset
any advice welcome
Click to expand...
Click to collapse
You'll need a new ROM. Put it into bootloader, and flash a WM5 NVID ROM (see the wiki for those). From there, HardSPL and flash a WM6.1 ROM.
Hi,
It's impossible for me to upgrade now my radio since my last flash. I put the 1.65.28.25 radio with the last htc french rom.
Every time I try to flash a radio, it work upon 99%, then it stop ( error 226 ) and it go to bootloader with RUUNBH error.
When I try to flash a rom+radio th error occurs about at 73% of upgrading process.
When I try to flash any rom without radio it works in every case..
Any Ideas ???
thx for answser
norbert80 said:
Hi,
It's impossible for me to upgrade now my radio since my last flash. I put the 1.65.28.25 radio with the last htc french rom.
Every time I try to flash a radio, it work upon 99%, then it stop ( error 226 ) and it go to bootloader with RUUNBH error.
When I try to flash a rom+radio th error occurs about at 73% of upgrading process.
When I try to flash any rom without radio it works in every case..
Any Ideas ???
thx for answser
Click to expand...
Click to collapse
well first you have to get rid of those ruunbh error flags via mtty (do a search for it and read the procedure on how to go about this).
After that security/supercid unlock your device and than proceed to flashing different radios.
Thanx for your answer
I get my kaiser back in normal mode by using KAISDIAG.NBH.
Should renew my security/cid unlock ??? I did that a few month ago.
Is it absoluty necessary to use mtty ? I put the hardspl 3.29 v2 and the commands i found in the wiki ("task 8") doesn't work. I think the mtty commands are spl dependent, i don't know theme for the patched 3.29 spl
@+
norbert80 said:
Thanx for your answer
I get my kaiser back in normal mode by using KAISDIAG.NBH.
Should renew my security/cid unlock ??? I did that a few month ago.
Is it absoluty necessary to use mtty ? I put the hardspl 3.29 v2 and the commands i found in the wiki ("task 8") doesn't work. I think the mtty commands are spl dependent, i don't know theme for the patched 3.29 spl
@+
Click to expand...
Click to collapse
yeah the commands are changed for 3.29 spl check jockyw's thread on more info about that. If the errors are cleared than you don't need to use mtty. Go to bootloader and give the info that is displayed over there.
My bootloader :
KAIS130
SPL-3.29.hard2
cpld-8
norbert80 said:
My bootloader :
KAIS130
SPL-3.29.hard2
cpld-8
Click to expand...
Click to collapse
does it say security unlocked on the top of this info? red font on a white background. If so than you are already security/supercid unlocked if not than you are not and i would advice to do it.
try reflashing radio after security unlocking your device.
It doesn't say that security is unlocked. Only when the modified radio of the kaiserunlocker is in use for security/simunlock.
I don't undestand, because since i security unlock a feew month ago, I was able to flash any radio.
I'll try as soon as possible, and i will give you feedback
Thx you
norbert80 said:
Hi,
It's impossible for me to upgrade now my radio since my last flash. I put the 1.65.28.25 radio with the last htc french rom.
Every time I try to flash a radio, it work upon 99%, then it stop ( error 226 ) and it go to bootloader with RUUNBH error.
When I try to flash a rom+radio th error occurs about at 73% of upgrading process.
When I try to flash any rom without radio it works in every case..
Any Ideas ???
thx for answser
Click to expand...
Click to collapse
That's by 1.65.28.25 radio, this is a solution:
FLASH 1.65.24.36 ONLY http://forum.xda-developers.com/showthread.php?t=393182
Done, you can flash others.
trandinh said:
That's by 1.65.28.25 radio, this is a solution:
FLASH 1.65.24.36 ONLY http://forum.xda-developers.com/showthread.php?t=393182
Done, you can flash others.
Click to expand...
Click to collapse
It works !!!!
I could upgrade my radio to 16.65.24.36. I'll try to put another radio as soon as possible.
Thanks a lot
norbert80 said:
It works !!!!
I could upgrade my radio to 16.65.24.36. I'll try to put another radio as soon as possible.
Thanks a lot
Click to expand...
Click to collapse
You can flash any Kaiser radio (BUT NO 1.65.17.10 - 'Radio from Hell' - or NO Kaiser radio) from:
http://forum.xda-developers.com/showthread.php?t=393182
and
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
I'm using 1.65.28.25 - fast fix GPS!
Hi,
I don't understand but i couldn't hav any gps fix with th 1.65.28.25 radio.
Since i've bought my kaiser, i can only fix with the original rom+radio's of french orange provider. With all other's combination of cooked rom and radio, it's impossible to fix...I tried rvry setting i've found on th forums, but impossible.
Thx