While on Holiday I changed one of the numbers in my contacts to +4407 from 07. I should have changed it to +447 because +4407 errors when sending. No problem you would have thought, just change in in the phone book. This works when sending a message by clicking new but doesn't work when clicking reply in a chat. I thought it was weird but it must have remembered it in the chat so I purged all messages. Still got the same problem. I deleted that contact and created a new one with a different name. Problem continued on the new contact! I even deleted the contact alltogther with the intention of adding the number from an incomming text. I has also purged the messages again. when the text came through it had the name of the contact on it and not a number even though all messages were purged and the contact didn't exist anymore.
Basically it must be remembering the incorrect number somewhere else. Do you guys have any idea where and can I get rid of it without a reset?
unbranded treo 750 with wm6 rom loaded.
Related
i recently went into the contacts list on my xda orbit 2
only to find it was only showing just 2 contacts which were listed on my sim card,
i cannot see any of my outlook contacts at all ?
if i wish to phone anyone who was on my contacts list,
i have to find MMS from this person and dial from there,
contact is showing correctly as sender of sms as per listing in contacts
except i cannot view the list showing 'ALL' contacts
any help appreciated folks
-thanks
Dont you have a filter in the contacts view?
hi,
my orbits filter settings are set to exactly the same as my mrs's orbit2
her contacts list is a-o-k
sms text messages recieved prior to this problem ALL show senders name as it was listed in contacts & also the number as was provided when i created the contact
ALA - orbit seems to be using the original contacts list to provide sender details for text messages recieved prior to error happening,
yet.....
will NOT allow me to access the contacts details etc,
anyone got any input / ideas etc, as im well n truely stuck without these contacts
same troubles
I have also found that on regular occasions that my Orbit 2 looses all the ring tones and name tags tied to contacts.. I can reset them all and within a few weeks they go back to default... Gets most annoying when you try to set tones to know who is calling..
AFAIK that's a Registry Error.
It's a common thing in MS Windows (including Windows Mobile) to have registry errors.
Only 2 things to solve this kind of problem:
Restore from the latest backup
Hard Reset
Hi,
Ive searched the forum for an answer but couldnt find one so therefore i turn to you all for my question.
I recently got my MDA Vario IV and am really happy with it. There is only 1 problem. Whenever I recieve a text from someone it shows the phonenumber of that person and not the name. This makes it hard for me to see who send me a text as all i see is mobile phone numbers and not contact names.
So what i see is:
+31612345678
blablabla
And not:
Cilenia
blablabla
Ive tried a couple of things to fix this but none of them seem to work.
- I've deleted one of my contacts i text often with from both SIMcard and phone and readded his phonenumber. Didn't work...
- I've clicked on the number in the SMS and resaved it in my phonebook from there and then got another text from that person and still only the phonenumber... (when i click on the number in the sms it keeps saying its an unknown number and if i want to add it to the phonebook, even if i just added it 2 seconds ago.)
- I then deleted the contact and saved it again via the text i recieved... when i got a new text from that person, there is still only the phonenumber!
How do i fix this??? Its annoying the crap out of me
Cilenia
for some reason i got this problem only with one contact so far.. a new msg wont show the contacts name, changed the +49 country code because the recieved sms didnt have the CC ... but my started conversation does show the name ... just recieving msgs wont show it .. strange thingy
Greetings, all;
I am having a problem with my unlocked Treo that is driving me batty. The device "forgets" some of my contacts when I am composing an SMS.
The contacts never actually dissapear from the phonebook, and I can always start an SMS from the Contacts page, but when I start typing a name in the "To' line on the new SMS page, some names are just not there anymore.
It's never the same name, and doing a soft reset corrects the problem... for about a day.
Any ideas what might be happening here? Thanks for the advise!
Fred
I would suggest that you backup your contacts using some free program such as TCB (total contacts backup) or PPC Contacts backup. Just back them up into a file in a folder in the phone or storage card. Then go back to the program and try to restore the contacts and choose the option of overwriting the existing contacts.
Also if you are referring to the drop down list when you choose list of contacts. Keep in mind that the list is only for people you have texted before, this not a list of contacts reflecting the phone book
yes.
i also have this same problem.
it seems like there are limited contact that showed in messaging box.
For example,
i have 20 contacts whose name is started from letters : "Sa"
but when i type "Sa" in the destination number on messaging box,
it is limited only to 10 contacts which is started from letters "Sa".
So the next 10 contacts is not showed up.
is there any possibility to tweak on registry to expand this limit ?
Pls help...
thanks a lot !
IH8Q8 said:
Greetings, all;
I am having a problem with my unlocked Treo that is driving me batty. The device "forgets" some of my contacts when I am composing an SMS.
The contacts never actually dissapear from the phonebook, and I can always start an SMS from the Contacts page, but when I start typing a name in the "To' line on the new SMS page, some names are just not there anymore.
It's never the same name, and doing a soft reset corrects the problem... for about a day.
Any ideas what might be happening here? Thanks for the advise!
Fred
Click to expand...
Click to collapse
i had the same issue as well.....one contact wasn't showing up.
2 things. make sure that that contact's number has been saved as his/her mobile number, not home or anything.
secondly, just restart or something. the problem went away for me later.
Actually, the missing contacts issue happens in many application. And the search results depends randomly.
For example, I got 2 "Sherry" in my contacts from OutLook in my PC. And pretty aware that I keep the phone number in the right field.
Type Sherry in Today, I got 2 Sherry listed.
Type Sherry in Contacts, I got nothing.
Thpe Sherry in SpeedDial Setting(Link to Contacts), I got nothing.
Type Sherry in To field in New Message, I got 2 again!?!?
Very unpredictable!!! And different name will yield very different results.
Customer Rep from Palm suggest me to do a Hard Reset. But I don't think it will help, however I'll try it.
Hoping to get the solution here!!! Thanks in advance.
The wired search result is gone after I upgrade my Treo750 from WM6 to WM6.1 with a Special Cooked ROM(Build 19199).
After the upgrade, my data had been synced from OutLook again. I'm not sure whether ROM upgrade or data sync did resolve the problem.
Anyway, I'm happ again with my Treo750 again!!
happypigxda said:
The wired search result is gone after I upgrade my Treo750 from WM6 to WM6.1 with a Special Cooked ROM(Build 19199).
After the upgrade, my data had been synced from OutLook again. I'm not sure whether ROM upgrade or data sync did resolve the problem.
Anyway, I'm happ again with my Treo750 again!!
Click to expand...
Click to collapse
Wired things again................
Treo 750 will freeze (no input from touch panel nor keyboard) when I entered the edit screen of the contact person which founded in Lookup field in "Today".
But editing the contact person in the "Contacts" application will not freeze.
The edit screens in the above cases are pretty the same except the upper left corner shows "Start" and "Contacts" separately.
Any help??? Thanks in advance.
I have tried many cooked roms with my i780, almost all of them WM 6.5.
I realized today that if I have more than one number registered inside an outlook contact (I am used to register alternative mobile phone numbers in the "pager" field), when I receive an sms from a contact with more than one phone number, there is absolutely no way to find out which number was used to text you. Also, when you reply, you don't know the phone number you are texting, you just know that its the same that was used from your contact to text you in the first place.
I realized that today when I was chatting a friend of mine believing that I use my "free of charge" sms messages (which I do when I text his main number) and ended up charging my balance. He told me he was using his alternate number (that I have registered as pager) and when I tried to somehow confirm it, i see there is no way. All you get is the name of your contact. No way to access extra info either for received or sent messages.
Am I missing something? Has anyone else realized that and/or has a problem with it?
I seem to have a weird problem with the Messages app from HTC. Searched all over the internet and XDA and nobody else seems to have reported the issue.
The issue is, if I go into the Messages app, the list shows all contacts names fine. But for some contacts, if I click into them, it shows the message history, but on top where it's supposed to show the name, instead shows their phone number, minus any separators, and a ">" symbol at the end.
Say, for example, a contact in the Messages app is John Doe. I see John Doe in the messages list, then when I click into it, instead of name it goes to, say, 15555555555>, and sometimes the whole thing is just black.
On the bottom where I write reply, the number shows up fine exactly as it's formatted in the actual contact info.
But if I try to reply there, when I click "Send", the keyboard disappears, but the message never gets sent, and this happens no matter how many times I try to reply or type the message again. As long as it's a reply, it doesn't work. But starting a new message to the same contact works just fine, but it's annoying to have to type the whole message, then copy and paste, and start a new message to the contact just to reply.
And it wouldn't be inconsistent formats either. Some numbers I have in both Google and Phone, I can delete all phone numbers except the Google one in the problem contact and issue persists. Some contacts have the number laid out the same way in (xxx) xxx-xxxx as the problem contact, and still works. I can change the problem contacts' phone number format to xxxxxxxxxx or 1xxxxxxxxxx and neither fixes anything.
I've tried pulling the battery, turning off fast boot and pulling battery, restarting, all the same result.
And this ONLY happens with the stock Messages app, all the other SMS apps I downloaded off the Market works just fine.
Any help would be appreciated, it's starting to drive me nuts.
Thanks!
I have noticed something odd about the stock messaging as well. In the text box where you type, some contacts display a phone number in the top of the box, while some do not. I don't know what causes it. I thought it was the way that HTC Sense sync'd to FB, but that didn't change anything.
offdutyninja808 said:
I have noticed something odd about the stock messaging as well. In the text box where you type, some contacts display a phone number in the top of the box, while some do not. I don't know what causes it. I thought it was the way that HTC Sense sync'd to FB, but that didn't change anything.
Click to expand...
Click to collapse
I think it may have something to do with the Select Contact Name option when you edit a contact. Say I have a two phone numbers and an email address for Bob. Once I set "Bob" as the contact name for his entry, that it what appears when I start composing messages to him.
I hope this helps.
Sent from my HTC Sensation 4G using XDA App
I can confirm the issue, so at least you're not the only one. But in my case it went away on its own sometime between temp rooting and unsuccessful over clocking
I posted this a week or so, I don't know if it helped the last person. but I had this EXACT problem and it was unbelievably frustrating when I first got this and after a few days of searching and banging my head against the wall, I found something that worked. This problem arised when I had double contacts from my messaging and I tried to rectify it. Eventually I got it all to work fine.
This is how you solve it (or how I solved mine).
1: Sync everything to Google. Edit the contact list in google (use the automatic duplicate deletion), delete useless contacts etc.
2. Remove contacts from EVERYWHERE. Sim card, phone, uncheck google sync. Your phone should then be completely empty for contacts.
3. Re-sync with google contacts. if you want you can copy it back to the SIM and you shouldn't get doubles. I think I just left it with google only but the end result is I don't have 9 different "danny's" show up when I go to compose new message because I know three of them.
This issue is bugging me too...
After experimenting today I have figured out why it is happening; any contact I have with an email address within the contact details I get the name followed by the mobile number within the HTC stock message app... Any contacts without an email address are fine.
I have experimented by removing an email address from the contact and straight away the said contact will display correctly in the HTC message app.
Unfortunately I have not yet figured out how to have contacts with phone numbers and email addresses display correctly. Real shame as loving my new Sensation... a minor niggle I guess
Tgis has happened to my phone once, but rectified itself with a soft-reset. It hasn't happened again since then. Not much help here, but its definitely not an isolated incident.
Sent from my HTC Sensation 4G using XDA App
Yes, This happened with me too.... But after i synchronised my accounts with my HTC and google contacts.... it was all sorted out...i was just thinking of hard reset.... but i was saved Try it once...