I bought an unlocked VOX and have not been able to receive files via bluetooth, which I noticed when attempting to send contacts from my old phone. I attempted this with both devices paired and unpaired, and even tried a hard reset but the problem remained. I can successfully send files but not receive.
I then flashed Dr. Martin Gonzo's WM6.1 ROM, but the problem still remains.
Any ideas what might be causing this?
Go to Options -> Connections -> and look what option you have to enable!
Everything's enabled as far as I'm aware: Bluetooth is on, the phone's visible to other devices, Beam setting are set to receive files from other devices...
I can't see why it won't work.
ive never been able to recieve files either via BT. I can pair with a BT device no problem but not recieve files.
Have you tried something like this: http://moblue.hejhej.org/
Ah, similar to Dr.Yar Bluetooth for PPC devices. Thanks, I'll give it a try.
Related
Yesterday I did a hard reset of my device with Midget_1990 v1.0 and spent the evening reinstalling my apps and setting it up to my liking. I have previously used this version of WM6 with no problems and it works great.
Today I have tried to pair my universal to a GPS reciever to run TomTom. Initially it paired up and I set the outgoing port to port 4 and set this on TomTom but it wouldn't find the device. I then tried to delete the pairing in bluetooth settings and repair. However after doing this I can get as far as inputting the passkey key but the screen asking me to select serial port is no longer there. Also when I go to the Comms port tap it is also blank with no New Outgoing Port to select.
I am reluctant to go through the reinstall process again so I would be very greatful if anyone knows how I can restore things back to normal.
Thanks in advance
Dan
I have installed the latest ROM from Dutty.
I have re-installed everything and paired with BT headset. Using Voice Command with headset no problem.
What I have not been able to figure out is to get Activesync working thru bluetooth. I have it paired with my laptop put it only gives me the option for Dial up networking for services.
Everything else is working better than ever and this ROM makes me appreciate my Tilt even more.
Any suggestions?
I suggest you post this question in his latest ROM thread. That is a more appropriate place to post this questions.
good luck.
Anybody have any suggestions on this issue.
This is the only thing I have not working. Just fixed VC1.6 Call announce.
Any help would be great.
To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.
TerraNocuus said:
To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.
Click to expand...
Click to collapse
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks
cephus6 said:
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks
Click to expand...
Click to collapse
make sure that activesync is set to the com port that you have defined as an incoming com port for you bluetooth (on the pc, not the phone). how to do this.......it all depends on what bluetooth stack you are using.
Finally got it.
The COM port matched in ActiveSync, but I discovered the bluetooth on my laptop would not delete my old version phone. It said it deleted, delete, close, reopen and it would reappear. Once I killed that everything worked like a charm.
Thanks for everyone's help and thank you Dutty for your work.
I'm sure there is a simple answer to this, but I haven't been able to find it.
I am trying to transfer a ringtone via Bluetooth from my Krzr to my new Fuze, and I can't get it to work. The devices pair without any problem, but when I try to send the ringtone, I get a failed message. This is not a copy-protected ringtone - it's just a music file I created. Is there some trick to this? There are work-arounds (transfer the file to the computer and then to the Fuze), but it is annoying and seems like it should be easy to do.
Did you turn on the Beam function on the Fuze? It's in the Comm Manager.
alfredob1 said:
Did you turn on the Beam function on the Fuze? It's in the Comm Manager.
Click to expand...
Click to collapse
I did. It didn't help.
Strangely, I can send files from the Fuze to the Krzr without a problem. But the Krzr can't send anything in reverse.
I haven't tried a phone to phone transfer yet, so not sure what else to advise. I know it works from computer to phone using bluetooth.
from my experience the bluetooth on this phone is absolutely terrible. itll connect just fine to my headset. but, i cannot for the life of me sync it up with my phone. bluetooth tethering is near impossible with all 3 of my bluetooth enabled laptops, as well as bluetooth activesync.
Go under Bluetooth settings under Comm Manager go to FTP Enable File Sharing and then go to security and turn off Authentication (Passkey) Required. You can keep Authentication on with another smart phone but when I wanted to send files from my LG non smart phone I had to turn it off.
I tried all the suggestions above, but with no luck. It's not the end of the world - the Bluetooth works with my headset, transferring files to/from the computer, and for tethering. It's more annoying than anything else, because there's no reason it shouldn't work.
Hi all,
I have searched and searched the forum and the internet but can find no answer to this issue.
I'm using an HTC Touch Dual (Neon 200) that I had set up to connect to my PC via bluetooth for Activesync.
No problems there, it all worked fine. The issue comes with my attempts to automate the synchronization. I had found and successfully used a program called CT Scheduler to start the bluetooth radio and then instigate the "Windows/repllog.exe" file to start a bluetooth activesync.
In Activesync, on the Touch, I go to "Menu-->Connections--->when cradled, synchronize all pc's using.........."
I had the option to select "`USB" or "`DIRECTORSOFFICE" (the name of my PC).
Now, I have no idea how the "`DIRECTORSOFFICE" option got there but I selected it and it all worked fine. I could connect via USB or Bluetooth and the auto-sync worked fine.
BUT, Here's the kicker, after a hard reset, I've restablished all my connections via bluetooth etc. and can manually initiate a sync via bluetooth. HOWEVER in the Activesync connections I can no longer select aything other than "`USB". For the life of me I cannot remember how I got the Touch to give me that other option and it is the ONLY thing preventing the auto bluetooth sync from working.
Any insight would be much appreciated.
Hi and welcome to XDA,
did you do a H-Reset or a new rom flash? the new rom may not support BT Activesync, you should also pair your phone to your PC, that may enable the option
Eh - my bad...should have specified in my OP. This is running stock WinMo 6.1 Professional.
Did you pair to your PC?
Not this time around.....dammit you know that sounds like it might be it! I'll have to a backup, hard reset and try it out.
If that's truly the case and I can get that option available again then I have a really tidy solution for people wanting to Autosync via Bluetooth.
(Although this is probably not an issue nowadays as most phones are coming with WiFi, so I guess people are syncing that way)
Badwolve1 said:
Did you pair to your PC?
Click to expand...
Click to collapse
OK, got too excited there. Of course I must have paired it with the PC or I wouldn't have been able to Activesync via BT manually right?
woodbane said:
OK, got too excited there. Of course I must have paired it with the PC or I wouldn't have been able to Activesync via BT manually right?
Click to expand...
Click to collapse
Depends what stack you have
Sorry, i don't think i can help
If i find anything, i'll let you know
Default MS BT stack for WinMo Pro 6.1. I haven't changed anything on this ROM at all.
I must have done something during BT setup that allowed that option to appear but I'll be damned if I can remember what it was!
It's not a huge deal as I luckily had a backup with that configuration working, I was just being a bit anal about doing a complete clean install, there were a few programs I wanted to get rid of and felt my phone had slowed up a bit.
Cheers.
So, I noticed that my Bluetooth no longer works on my Focus.
I have it interloped unlocked and running OS version 7.10.8862.144
I was trying a Bluetooth file transfer program, and it no longer enables. If I toggle it, my phone thinks it's on, but the status bar icon never shows up. It can't see other bluetooth devices and they can't see it.
My guess is that the file transfer program screwed up some settings.
Anyone willing to look for the settings I should have in the registry and possibly the driver names?
What is your Bluetooth file transfer program?
I removed it after it didn't work. The suppose bigger issue is that I tried a few programs, and I don't remember the names.
The ones I remember are as fallows : BT Transfer, DFT BT File Transfer, and Nokia Bluetooth Share.
DFT BT File Transfer for Full Unlock.
Nokia Bluetooth Share must have Nokia drivers on your phone.
Ok, but my issue is that Bluetooth no longer works at all.