A few weeks ago, I installed WM6.1 on my Tilt, using vL26_3.53.502.0_WM6.1_PRO_V1 (not sure who created it).
My issue is that now, even though I have set it to display dates in US format, it is still showing them in UK format.
Also, I cannot seem to get it to display 12 hour time, instead of 24 hour time.
Anyone know if there is a fix for this?
Thanks,
Steve
Haacker said:
A few weeks ago, I installed WM6.1 on my Tilt, using vL26_3.53.502.0_WM6.1_PRO_V1 (not sure who created it).
My issue is that now, even though I have set it to display dates in US format, it is still showing them in UK format.
Also, I cannot seem to get it to display 12 hour time, instead of 24 hour time.
Anyone know if there is a fix for this?
Thanks,
Steve
Click to expand...
Click to collapse
In the future, please ask in the appropriate thread. This is not a ROM development issue, it's an issue with a specfic ROM.
For starters try looking in
HKLM\nls\overrides
in the regsitry.
ta
Dave
Haacker said:
A few weeks ago, I installed WM6.1 on my Tilt, using vL26_3.53.502.0_WM6.1_PRO_V1 (not sure who created it).
My issue is that now, even though I have set it to display dates in US format, it is still showing them in UK format.
Also, I cannot seem to get it to display 12 hour time, instead of 24 hour time.
Click to expand...
Click to collapse
Searching a bit will help next time, but:
Check under >Settings >System >Regional Settings> and make sure the region is right, and then under Time you should have Time style look like h:mm:ss. If you have HH, that will skrew it up.
Check under >Settings >System >Clock and Alarms> and make sure your home settings are correct too.
Check them both, make sure they're right, and then soft reset, pushing the power button until it asks if you want to turn the phone off.
You need to go into regional settings to make the change in both date and time. Remember for the time to scroll up to find the time ending in tt. Do a soft reset after changing the settings.
BTW - this has been address a bunch of times already.
Related
Does anyone know why this happens and how to prevent it? I've tried just about every ROM on here and it happens with all of them... All you cookers out there are doing awesome work, but I was curious whether anyone else had this problem. I can't tell if an application is causing it, I don't think that's the case. Even when I set regional settings to US it still happens after a day or so and once it does it won't return to 12 hour time. Any ideas?
fix the registry before you flash it and it won't
dchoward1977 said:
Does anyone know why this happens and how to prevent it? I've tried just about every ROM on here and it happens with all of them... All you cookers out there are doing awesome work, but I was curious whether anyone else had this problem. I can't tell if an application is causing it, I don't think that's the case. Even when I set regional settings to US it still happens after a day or so and once it does it won't return to 12 hour time. Any ideas?
Click to expand...
Click to collapse
Crossbow Reloaded is set to h:mm:ss so its not military time by default. I think some are that way since the default base roms seem that way. I modified the faria base so the region was US and not military time by default.
Is there a list of all known registry tweaks (preferably with ones that work with WM6) somewhere that I've missed? Is this issue only fixable by changing this registry setting prior to a flash or can it be done after the fact? Thanks for all your help.
I'm not sure what you are asking... If you are on a ROM that defaults to military time, then just change it to h:mm:ss via Settings > System > Regional Settings > Time. In the drop down for the time format on the right side of the dropdown there are arrows. click the up arrow a couple of times and you will see the non-24 hour ones. Choose it and you are done. I've never seen it switch back after doing this on any WM6 rom, so no registry hacks are needed.
i use the following keys with my kitchen. I believe mun's latest rom is set to US 12hour by default but i'm not sure since i use these to force it
Code:
[HKEY_LOCAL_MACHINE\nls\overrides]
"IDate"="0"
"SDate"="/"
"SSDte"="MM/dd/yy"
"STFmt"="h:mm:ss:tt"
"STime"=":"
mfrazz nailed it. I wasn't aware of the other settings in the drop down menu. When I'd click on it it'd only show 2 options, it never occured to me to try scrolling through. Duhh... Only had my Wizard for a month now, came from modding Moto's so still getting familiar with the Windows Mobile OS. Should have known it was something so blatently obvious, thanks a lot everyone. Much appreciation and respect.
dchoward1977 said:
mfrazz nailed it. I wasn't aware of the other settings in the drop down menu. When I'd click on it it'd only show 2 options, it never occured to me to try scrolling through. Duhh... Only had my Wizard for a month now, came from modding Moto's so still getting familiar with the Windows Mobile OS. Should have known it was something so blatently obvious, thanks a lot everyone. Much appreciation and respect.
Click to expand...
Click to collapse
+ 1, thanks for the info.
OK OK... I know what youa re going to say... "There are threads everywhere in here, why dont you look?"
Well I have and everything keeps pointing to changing the Region settings. OK I have done that. currently my regional settings are set to "h:mm:ss tt" and my HTC Home (HTCHomeWM56Tab.cab) currently has 15:00. I have changed it to evey different setting and the only thing that changes is the leading 0.
I have change the settings soft reset, changed them back , soft reset again... over and over but I still only have 24 hour clock. in other plugins the time format is correct, it is only the HTC Home plugin that is incorrect.
Any advice on resolving this issue would be great.
Thanks,
SoBBie
OK Now I am really confused and frustrated... I have found also that the regional settings are held in [HKLM>nls] and [HKLM>nls>overrides]. I have changed these and still nothing is happening to the.
Here are the settings in my Registry:
[HKLM>nls]
DefaultACP: 1252
DefaultLCID: 1033
OCP: 437
LegacyLocaleMode: 1
SystemLCID: 1033
[HKLM>nls>overrides]
IDate: 1
ITime: 1
ITLZr: 1
ITMPN: 1
SDate: -
SSDte: dd-MMM-yy
STFmt: hh:mm:ss tt
STime: :
LICD: 1033
Now when I change the Date format it changes in HTC Home immediately. When I change the the date setting through the regional settings the date changes right away. But NOTHING I do to the time formate changes it to non-military. I soft reset after each registry change but still nothing. The Time format changes in my time settings but not in HTC Home
Please any help would be greatly appreciated. I am not sure what to try next. Does anyone know of a registry key that locks the time format? I thought I read the ITime activates overrides which has the correct settings... am I incorrect?
Thanks in advance for any help you can give me...
Best Regards,
SoBBie
I just flashed Dutty's Official WM6.1 today on my Tilt and I to am having the same problem, and it's drivin' me nutz.
I have tried re-flashing, changing registry still the same.
I flashed this originally in the P.M. hours and did remember seeing the time displayed correctly on initial boot after flashing, then stupid me let the at&t config run and since then it's military time only.
I tried re-flashing hoping that not letting the at&t config run might fix it but this time it was on military time on first boot before the config ran so what ever it changed it was something that is not reaffected be re-flashing the same ROM.
I also tried a hard reset, no luck there either. Next step is to try flashing back to OEM ROM and starting from scratch.
Hopefully somebody will have a fix posted soon with an answer to this so I don't have to waste my time with OEM flash.
Just doing some more checking, it seems it is a bug in the HTC home app. I set it to display date on the today screen and the time is correct format (8:00 p.m.) there but directly below the large "Home screen" clock shows military time (20:00). Is there somewhere to edit this in the home screen part, as I stated before it showed correctly on initial boot from initial flash?
Thaks for any help, keep up the awsome work Dutty!!
go to
HKEY_LOCAL_MACHINE\nls\overrides
and add the following values as String Value...
"S1159" = " AM"
"S2359" = " PM"
or just import the attached reg ... try and post your results
also found this
http://forum.xda-developers.com/showthread.php?p=2000880#post2000880
set STFmt to HH:mm:ss
it worked for me
PapaDocta thx for help.
Was it really necessary to revive a tread from almost three years ago?
Hi All,
I have a wizrad (USA Tmo) with original rom. I have the current version of s2u2 installed on my device and have the following problems. I have searched the forum unsuccessfully. And have tried my best to resolve the issues. I am hoping that I am just missing something painfully obvious. Thanks for the help
1) I have it registered to lock on wake up. But it only works sporadically. I have no idea when it will lock. Most times it won't. I have checked the exemption list and don't have any offending programs registered.
2) I set the clock path in the registry. But every time I restart iLock it erases my set Value data. So I can never get the clock to appear.
Thanks again. Perhaps these are known issues that I have somehow over looked. My eyes have been pretty weary lately- working in front of computer a lot lately. So I apologize if i did miss something.
-P
cameraddict said:
Hi All,
I have a wizrad (USA Tmo) with original rom. I have the current version of s2u2 installed on my device and have the following problems. I have searched the forum unsuccessfully. And have tried my best to resolve the issues. I am hoping that I am just missing something painfully obvious. Thanks for the help
1) I have it registered to lock on wake up. But it only works sporadically. I have no idea when it will lock. Most times it won't. I have checked the exemption list and don't have any offending programs registered.
2) I set the clock path in the registry. But every time I restart iLock it erases my set Value data. So I can never get the clock to appear.
Thanks again. Perhaps these are known issues that I have somehow over looked. My eyes have been pretty weary lately- working in front of computer a lot lately. So I apologize if i did miss something.
-P
Click to expand...
Click to collapse
Ok, 1st this should probably be in the Wizard forum..............but, try setting it to lock when the backlight shuts off, this is how I had mine set up, and it worked fine.
As for the clock, if it is not showing up at all, make sure that you have it set to ClockA (I think) and see if that works.
idbl_fanatic said:
Ok, 1st this should probably be in the Wizard forum..............but, try setting it to lock when the backlight shuts off, this is how I had mine set up, and it worked fine.
As for the clock, if it is not showing up at all, make sure that you have it set to ClockA (I think) and see if that works.
Click to expand...
Click to collapse
i think this should be in the S2U2 forum, that way the creator can try and diagnose the issues.
http://forum.xda-developers.com/showthread.php?t=464695
Thank you both. I will make sure I repost in the correct forum.
Later
Since a couple of weeks, my OPO switch itself to vibrate-mode, and I have no clue where it's coming from.
Tasker, Locale and such apps have been deleted.
Profiles are deactivated.
But still... Even when I manually switch on sound notification and ringtone, it goes back to vibrate mode after a while.
I've reviewed every settings that could be involved with that, but I still don't find a solution.
Is this a known bug ?
Is there a setting I missed ?
I couldn't say, but any help is welcome (I'm currently looking for a job, I need to hear my phone and not missing any call...)
Thx by advance !
Don't know which rom you are using, but at least try to reflash your rom it will be fixed i guess
Chinaroad said:
Don't know which rom you are using, but at least try to reflash your rom it will be fixed i guess
Click to expand...
Click to collapse
I kept the original rom (Cyanogen) and it's updated...
I want to re-roll this phone for multiple reasons but I still keep faith in the fact that I don't need to reflash anything in order to have a phone actually ringing
PascalDk said:
I kept the original rom (Cyanogen) and it's updated...
I want to re-roll this phone for multiple reasons but I still keep faith in the fact that I don't need to reflash anything in order to have a phone actually ringing
Click to expand...
Click to collapse
You sure you haven't set up CM profiles in settings? Does this happen at specific TIMES (eg. 2PM every afternoon) or at specific INTERVALS (eg. 2 hours after you manually enabled ringer)?
The Dork Knight Rises said:
You sure you haven't set up CM profiles in settings? Does this happen at specific TIMES (eg. 2PM every afternoon) or at specific INTERVALS (eg. 2 hours after you manually enabled ringer)?
Click to expand...
Click to collapse
As I said in the original post, Profiles are deactivated + Tasker and such apps are deleted.
I still don't get if it happens at specific time (ie: every day at 2 pm), or after a specific delay (ie : 2 hours after I switch the ringtone back).
It seems to be the second option, but I lack a good monitor app that could brings me some intel about what's happening on my phone and what triggers events
PascalDk said:
As I said in the original post, Profiles are deactivated + Tasker and such apps are deleted.
I still don't get if it happens at specific time (ie: every day at 2 pm), or after a specific delay (ie : 2 hours after I switch the ringtone back).
It seems to be the second option, but I lack a good monitor app that could brings me some intel about what's happening on my phone and what triggers events
Click to expand...
Click to collapse
if you discover that it happens at specific time, just plug in the phone in PC and get a logcat
effry said:
if you discover that it happens at specific time, just plug in the phone in PC and get a logcat
Click to expand...
Click to collapse
Thx.. I'm going to digg about logcat then (I see what it is but I never use that).
Is there any way to look into a logcat (or other log-stuff) by searching events (or text) instead of time-stamp ?
Is there any app or software that helps digging this full load of data ?
I hate myself right now... I'm using MyPhoneExplorer and there is a setting to switch your phone ringtone while connected to a known-wifi.
And yes, I have activated this settings myself
In a word, when you don't find a solution on XDA or any forum, the bug is probably you...
#lessonlearned
My phone is randomly logging battery status. Sometimes every few seconds.
The log is always the same. Battery level greater than zero, with date and time stamp.
Sometimes it's a few seconds apart, sometimes it's a minute or two. Overnight it was exactly every 30 minutes. It's writing the log to a text file. It appears to have been doing this ever since I got the phone. Only yesterday, it just decided to start notifying me of this. An Office notificaation pops up with "Batterylog.txt is ready to download"
Every.
Freakin'.
Time.
Haven't figured out why or how to stop the logging, but turning off notifications for office at least stopped the annoying notifications.
I have an S22 Ultra, all stock and up to date. Any way to stop it?
Where is it logging it to? Can you share the file? I wonder if there is something in the header of the file
gmm6797 said:
Where is it logging it to? Can you share the file? I wonder if there is something in the header of the file
Click to expand...
Click to collapse
It's saving in Documents. This is everything it shows. i see no header info.
That doesnt help me help you. I have seen apps that log what they are doing, and with new Android permission rules, everything has to go into downloads... so that makes it even harder. I am at a loss with that info, sorry
gmm6797 said:
That doesnt help me help you. I have seen apps that log what they are doing, and with new Android permission rules, everything has to go into downloads... so that makes it even harder. I am at a loss with that info, sorry
Click to expand...
Click to collapse
Yeah. There just isn't a lot of info there. I was mostly curious as to why whatever it is feels the need to log the battery status every 30 minutes, and why the only info given is "battery level greater than zero". That's pretty obvious by the fact that the phone is on. I'm even more curious as to why, all of a sudden, it started sending me notifications for it. I haven't changed any settings in forever.
I'd like to know what app it is, but there is absolutely nothing to go on. The file size is up to 1.4 kb since 11/03 04:37. I wonder how long it will take to get to 1 GB.
I'm sure there has to be an explanation. One of your apps is doing it, just not sure how to figure out which one it is.
I agree. I'm sure you've thought of this but it might be time to uninstall your apps one at a time until you figure out which one is responsible for it.
pauper66 said:
It's saving in Documents. This is everything it shows. i see no header info.
Click to expand...
Click to collapse
go to developer options and see if you have accidentally enabled "system activity" recording or some other setting there etc ..
daitalos said:
go to developer options and see if you have accidentally enabled "system activity" recording or some other setting there etc this has-been happening since the day the phone went into service. I didn't go into developer options until some time after, but I did check that. And asany settings as I could possibly find.
Click to expand...
Click to collapse
dj24 said:
I agree. I'm sure you've thought of this but it might be time to uninstall your apps one at a time until you figure out which one is responsible for it.
Click to expand...
Click to collapse
That thought occurred to me, but I opted for planB instead. I ordered a Pixel 7 Pro last nigjt.
Not purely for this reason tho. Phone tookansty fall a couple months ago. Nickel size chunk of screen gone, and it hasn't been fully right since screen replacement. Something loose inside, among other things.