hello
i update my qtek 9100 to a new rom win 6.0 and wen the update ends the qtek dont iniciate only apers the inicial screen were are the informacion of IPL,SLP and OS any one can help me to fix this ???
please
my qtek 9100 is a G4
i had this problem to:
i used softspl and then the new software dont work
....
you have to to it again and again than it work
i hope you can you something with this
if you dont understand PM me
srry for bad english im dutch
if you patched phone with soft spl, you can only with soft spl do the update or use the Love (G4) or buttonrom (G3) in the bootscreen.
i dont know if it is a G4 or G3 one.
barry2008 said:
i had this problem to:
i used softspl and then the new software dont work
....
you have to to it again and again than it work
i hope you can you something with this
if you dont understand PM me
srry for bad english im dutch
Click to expand...
Click to collapse
Perform a 'Hard Reset',otherwise reflash the rom.
can you tell me how to reflash the rom
please
gooblin said:
can you tell me how to reflash the rom
please
Click to expand...
Click to collapse
Read and follow this guide correctly,especially the 'G4' section for upgrading a G4 device,get your phone HardSPL or SoftSPL to upgrade :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Related
hi all!!!
I want to downgrate my s200 to aku2.2 original rom... but i can't do it!! my phone stop at 95% when i'm uprating!!!
I have tried aku2.1 but nothing at all!! stops at 95% to!!!
The only rom who i can install and have 100% Sucessfull is, Fantastic v1.1i Step1!!
I dont know why!!
Can some help-me? please
P.S. sorry my bad english :x
EDIT: i have 3.08 SPL ... i think is that the problem!? :S I have g4 device!
P4k1t0 said:
hi all!!!
I want to downgrate my s200 to aku2.2 original rom... but i can't do it!! my phone stop at 95% when i'm uprating!!!
I have tried aku2.1 but nothing at all!! stops at 95% to!!!
The only rom who i can install and have 100% Sucessfull is, Fantastic v1.1i Step1!!
I dont know why!!
Can some help-me? please
P.S. sorry my bad english :x
EDIT: i have 3.08 SPL ... i think is that the problem!? :S I have g4 device!
Click to expand...
Click to collapse
Maybe hard reset before you do downgrade?
what aku2.1 rom are you using? maybe you should try some official roms instead?
P4k1t0 said:
hi all!!!
I want to downgrate my s200 to aku2.2 original rom... but i can't do it!! my phone stop at 95% when i'm uprating!!!
I have tried aku2.1 but nothing at all!! stops at 95% to!!!
The only rom who i can install and have 100% Sucessfull is, Fantastic v1.1i Step1!!
I dont know why!!
Can some help-me? please
P.S. sorry my bad english :x
EDIT: i have 3.08 SPL ... i think is that the problem!? :S I have g4 device!
Click to expand...
Click to collapse
phone stop at 95% when i'm uprading no problem. when stop in 95% you only have to put in bootloader again and install a radio 2.47 , 2.61 or 2.69 and your prophet have a 2.20 again
sorry for my english im spanish
salu2
mine stopped once at 95% when I tried to install non-WWE rom
(G4 - cid-locked)
hashtrash said:
phone stop at 95% when i'm uprading no problem. when stop in 95% you only have to put in bootloader again and install a radio 2.47 , 2.61 or 2.69 and your prophet have a 2.20 again
sorry for my english im spanish
salu2
Click to expand...
Click to collapse
Hummm... i dont think so... but i will try and tell you something!
kenxu said:
Maybe hard reset before you do downgrade?
what aku2.1 rom are you using? maybe you should try some official roms instead?
Click to expand...
Click to collapse
i have tried this roms:
RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID!!!
P4k1t0 said:
i have tried this roms:
RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID!!!
Click to expand...
Click to collapse
both roms u mentioned, certainly contain ipl or spl like 2.xx and hence they will not downgrade ( only ipl/spl part) unless ur CID unlocked.
thats why ur flashing hangs at 95%.
U just extract only OS part ( 80040000-OS.nb) from roms and repack in nk.nbf and then flash with RUU.
see this topic: http://forum.xda-developers.com/showthread.php?t=300356
try this
listen toi my advice, i tried it and succeded with me
FOLLOW EVRY SINGLE STEP IN THE ATTACHED
feed me back please
sorry forgot to attach the file
sorry buddy forgot to attach the file
fadimck said:
listen toi my advice, i tried it and succeded with me
FOLLOW EVRY SINGLE STEP IN THE ATTACHED
feed me back please
Click to expand...
Click to collapse
Hi all...
I have a doubt!! =///
I have install spl 3.08
i know it was impossible to downgrate a rom without do a little trick...
i have search this link... http://forum.xda-developers.com/showthread.php?t=300356
I have tryied and tryied, and i can't do it! =/
Can any upload the official rom aku 2.20 (RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship) able to install on my qtek with spl 3.08?
Peaseee!!! Please peopleee!!!
I have a g4 device!
why dont you try one of these, and after that an cooked rom?
Supr said:
why dont you try one of these, and after that an cooked rom?
Click to expand...
Click to collapse
LOl ?
I have tryied this officials rom´s .... but stops at 95% when i'm flashing my device!
Same thing here!
Hello,
I had a problm lately with my device and had to reflash Aserg .13. As we already know i had to go back to the NVID or original Qtek ROM but anything I try rejects the nk.nbf file at around 95% of the loading.
I don't consider myself as a newbie but I admit i am stuck now.
Any help?
Thank you
P4k1t0
Jow ... www.imei-check.co.uk ... unlock your Device and tell them you have SPL 3.08.0001 They can Provide a SPL downgrade to SPL 2.13.0001. After that ... all functions are normal.
Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.
you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human
paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
- ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
What is you SPL Version?
NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.
As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?
NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.
Hy ewerybody, please hlep me!
I tried more of roms, and i want to goes back to my old O2 XDA NEO german rom (Version 215447 2154140 021921) but i cant update, it write that the nf file is to old, i tried noid rom (RUU_Prophet_220734_2207114_024721_NVID.exe) to, but it stops at 95% with error, please help me to solve my big problem, i have to brings back my prophet to the service but so i cant do...
thanks a lot!
At the moument i have:
O2 XDA Neo G4
IPL: 2.15.0001
SPL: 2.20.0001
GSM: 2.19.21
OS Pdawiet 4.0.0.0.5a
the proplem at 95% cause of the SPL, as the Radio version did't update from 2.19 to 2.47, it is before the SPL, it is from the Radio or something before, may be the extension.
let me guss, try the step 1 of WM6, only os.nb and extension and tell me what will you get, after that try the NVID 2.20 it is the best ROM ever I tested
but it is stange that you have the same old os
re
Hy, i red at the moument your reply, thanx a lot.
could you write me again because i dont understand what you tell me.
i have to make a step one (prophet pv temp)and after that my old o2 rom update?
krobi227 said:
Hy, i red at the moument your reply, thanx a lot.
could you write me again because i dont understand what you tell me.
i have to make a step one (prophet pv temp)and after that my old o2 rom update?
Click to expand...
Click to collapse
Dear krobi227
U want to downgragde from Wm06 to Wm05, i think u only up (prophet pv temp) --> it's blank Rom so afterthat u can Upgragde another WM06 ROm again !
good luck !
Hy, re
Hy yes o wnat wm6 to wm5 becase i have to bring it back to service, so i have to update the official rom,and dont a new wm6.
i will try as you said me.thanx a lot
i dont know what to do or where to download the ROMm for the G4
i was lokking wor a windows mobile 6.1 ROM
Just try CR86 Touch HD if you like. If you flashed hardspl, then simply run the RUU_GO.exe and flash the ROM. Don't worry about G4 or G3.
If you have any problems, just PM. Ya, my right hand work is to help noobs and my left hand work is to cook ROM's
best regards
I agree with CRACING.Ha，your ROM is so great.Beautiful and fast.By the way,does V1.4 be better than V1.5?
triksgold said:
I agree with CRACING.Ha，your ROM is so great.Beautiful and fast.By the way,does V1.4 be better than V1.5?
Click to expand...
Click to collapse
Thanks. I am releasing version 1.6 with lots of updates.
85Mario85 said:
i dont know what to do or where to download the ROMm for the G4
i was lokking wor a windows mobile 6.1 ROM
Click to expand...
Click to collapse
Hi there, asi CRACING (I think was him) told you before, if you have un blocked your wizard, (NOW IN THE SECOND LINE WHEN YOU TURN IT ON SAYS IPL: OLIP)
it means it´s unblocked....
so download a ROM, it will come fully working, i mean its just use the RUU and thar way you will have a new OS on your wizard)
or PM me and i will try to help you in english or spanish)