does anyone know how to lower the sound of the vibration... i dont mean sound but like how hard the vibrate is and the loud sound it makes?
help please
You may fix it by replacing it with a other small vibration (from other phone for example)
and how do i do that? you mean use a different phone?
no he mean opening the device and removing warrenty in the process
recall somebody talking about changing the tiny smd resistors connected to the vibrator with a higher or lower value to shorten og lengthen or limit the vibration
i dont sugest people without much exp does that
Related
J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
The problem is that there is not enough power available from the audio amplifier. This can't be corrected with software.
What this .cab does is probably that it tries to increase the amplification beoynd the capabilities of the device. This may make the sound seem louder, but as you have noticed, it also increases distortion. There is no workaround for the laws of physics...
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
illi said:
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
Click to expand...
Click to collapse
Did you change the dll file in the registry so that if points at the right one? Its been written a couple of times the the SRSWOW cab going about set the wrong values in the reg. So I think this should be an easy fix if you do a bit of searching. Try the Daimond forums.
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
@WizP: I'll do a search for the fix.
@Taajuus: The sound must be decent enough....
Taajuus said:
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
Click to expand...
Click to collapse
I have my volume set to the halfway mark. I'm talking about the conversation volume, only settable while in a call, not the system or ringer volumes.
Those that are reporting low volume, is it the ringer, system, or call volume you are complaining about? In other words, is it the front or the rear speaker that's producing low volume?
The ring volume is more than fine, it's just the speaker volume when in a call, when outsuide you can hardly hear it
Yes, I concur.
I've got my in call volume at maximum and you can still barely hear the other person.
Before you ask, I don't have a screen protector covering the earpiece.
I still wonder - I havent had any problems with incall voice. Can hear person very clearly even outside in traffic noise.
Could this really be single device problem, or maybe operator dependant?
With that audiopara file in my raphael (ROMeOS V.1.05) the speakerphone volume is now hugh,the music playback is loud, but a little disorted, but j think that there was no serious change in incoming ringtones (though j use only wav files-that are much louder from mp3's.
As far as the disortion a new modified audiopara file that suits well with Raphael should make the difference.
J will try some mods with SRSWOW..
Worked here... But the sound is VERY distorted..
Couldn't find a way around it with SRS (Tried treble reducer) and no luck.
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Mr.Sir said:
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Click to expand...
Click to collapse
REMOVE THAT. It's the same thing if I tried to yell to you with a wall in between us. Sound has difficulty traveling through a medium, specially a piece of plastic.
Dear Taajuus,
Could this really be single device problem
Click to expand...
Click to collapse
Well... yes sit can because:
1. There are several related problems that are not seen in all devices.
2. Not all Raphaels [Touch Pro] are the same model, make or version.
or maybe operator dependant
Click to expand...
Click to collapse
It can never be related to the operator because:
1. The operator's interaction with the device is the one of a comm carrier.
2. It's only possible influence would be with/thorough the radio, never the ROM.
3. The operator cannot directly interact with the hardware.
Cheers.
xenkato said:
J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
Click to expand...
Click to collapse
how do you install this?
The sound is distored cause tripp modified the values of the gain but put it too high. If some one could put lower values it would be great. I tried but didn't manage . I also tried to put the values of the HTC NIKE but it resulted in a lower sound that the original one.
How to install audiopara (to 'ekerbuddyeker")
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
xenkato said:
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
Click to expand...
Click to collapse
Ah, so that's how you install it ololol better write this on the first post...
Well for me this file really fixed the sound of my device, specially the earspeaker!! Now I have to lower the system sound so I don't get deft
I recommend everyone to use it...
So do u actually mean that this cab file has increased the volume on a call or just the general sound???
Does anyone know what the different parameters in the columns adjust in the AudioPara_.csv file? Seems like this file, if tweaked properly can fix several sound issues. Some seem fairly obvious but others not.
There also seems to be some kind of compression/limiting going on, loud noises in the receiver will bring volume too far down and then I can barely hear the other person. HTC is probably protecting the tiny speakers, but it seems it's not adjusted properly. Sometimes even first outgoing ring is nice and loud, but the next is soft. Go figure!
This is also true for the outgoing mic. I have had some people say it's too loud from my phone. Sometimes I can even hear my own background noise loud through my earpiece, similar to the mic sensitivity thread. If I talk fairly loud then sometimes the overall volume drops, including my receiver, regardless of the microphone AGC setting.
With recording there seems to be some control from the AGC enable switch setting, but even when it's turned off, there is some sort of limiting. I've tried a few different audio programs to record and they respond similar. The gain controls offered in these programs don't seem to do much. Recording music easily clips the sound! The AudioPara file has controls for CE_REC_INC_MIC and CE_REC_EXT_MIC, which seem like this might control some of this. Again there are many columns of adjustments.
Seems like this file can fix a lot, but it would be beneficial to have a better understanding before blindly trying this and that as many have. Does anyone know where to get replacement speakers if we blow one from the wrong settings? Please share any knowledge you have about these settings and suggestions of where to find out more. It seems like more than just gain and volume that needs adjustment.
Thanks!
Hi
Does anyone know if there's a way to further reduce the in-call volume on the Desire S?
Even at it's lowest setting I often find the volume in a call to be a little too loud for me.
Anyone know of an app to do this or some way to tweak the phone?
My DS is unrooted on stock 2.3.5 (sadly).
Thanks in advance.
Ben
I doubt this would be possible unless you replaced your kernel, even then I doubt any have this feature! Let me know if you do find a way, however!
And I would like to know how to raise max in call volume ?
Ben Zero said:
Hi
Does anyone know if there's a way to further reduce the in-call volume on the Desire S?
Even at it's lowest setting I often find the volume in a call to be a little too loud for me.
Anyone know of an app to do this or some way to tweak the phone?
My DS is unrooted on stock 2.3.5 (sadly).
Thanks in advance.
Ben
Click to expand...
Click to collapse
That doesn't sound right. (Honestly no pun intended there. ) I seem to remember my stock ROM would go down to inaudible levels.
What could be happening, which I have encountered before, is the phone's G-Sensor calibration is shot, so the phone thinks it's always face down, and hence answers all call in loud speaker mode. This would be very loud held to your head!
Try going into: Settings> Sound> and deactivate 'flip for speaker' or something similar to that. (Sorry I'm not running a Sense ROM right now so can't remember the exact phrasing.)
If this drops volume levels back to comfortable levels then re-calibrate your G-Sensor, or leave the 'flip for speaker' setting off.
If not, and you have super-human hearing, the only other options would be;
Rooting the phone and using a custom kernel with volume tweaks
Using earphones with an in-line volume slider.
Stuffing cheese in your ears.
Any 3rd party apps will simply tap into the existing volume controls so I doubt they'll be of any help. You could give Audio Manager a go though....
https://market.android.com/details?id=com.smartandroidapps.audiowidget&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5zbWFydGFuZHJvaWRhcHBzLmF1ZGlvd2lkZ2V0Il0.
really? lol, mine is sometimes too soft on max volume n loud areas
Mine is definitely too quiet. I had a T-Mobile branded one but currently runing Endymion on it. I red somewhere on the forum that many T-Mobile branded devices has low max volume settings but I though that custom kernel will solve the problem.
My phone is an LG G7 thinq and the sound quality is great with my Dre headphones but I was messing around with a ringtone app and I'll tell you now that I use Poweramp if you didn't notice in the title. for some reason I was increasing the volume on a few ringtones and went back in to listen to music in Poweramp pro and for some reason the volume was almost double. I mean it sounded like I was in a car with two 18 inch subwoofers in the trunk and pushing 4000 watts into each one. There was absolutely no distortion and this lasted until I turn the phone off for the night and when I came back the next day to try it out and see if it was still working that way the volume had returned to what was the usual. It has great sound quality but it pisses me off that governments or manufacturers or whoever it is limits the volume level in order to protect our ears. should we be the ones to decide if we want to go deaf? Hahaha like somebody would actually try to cause themselves harm. Anyway when I had a ton of bass and volume I created a backup or an export of my settings but when I try to import the settings the bass and volume did not increase the way it was after I had been messing with my ringtone app. I haven't been able to mimic this again and the only thing I can tell you is I have the Canadian Snapdragon model that I don't believe is rootable yet so does anyone know how I can increase the volume and base which I'm guessing will involve turning the power up somehow on the amplifier to achieve this or is it a lost cause? I tried about 20 different apps that were supposed to boost the volume and or the base and most did one or the other but if you boosted volume and base the sound actually got quieter in order to compensate for the excess bass I'm guessing. I want to know if there is a way to edit code or mess with the amplifier or change any files in order to achieve that evening of bliss where I did not need to go out in my ride and wake the neighbours. has anyone else found a glitch that causes this to happen and knows how to make it happen repeatedly? And why when you increase the volume level well the gain on the slider or any of the bass or treble sliders on the EQ why does the volume decrease when doing so when turning up the bass or treble most people's reason is because they want that particular part of sound to be increased not decreased and fine-tuned. I don't mind screwing up this phone in order to try and achieve this so if there are any suggestions please holler at me because I have found nothing and have been trying for 3 days now, not constantly I do stop to eat and pee and all that plus deal with family and kids but on my free time the past 3 days have been a big fail.
Somebody let me know what files to edit and how to edit them and if it's possible to edit them on an unrooted phone and I need methods that work on an unrooted phone unless somebody can point me to a root method that works on the LG G7 thinq and I will attempt it even though installing viper4android is what I'm going for. I know this will be counterproductive when it comes to sound quality but I'm more into the volume level and just clean and clear bass and treble with vocal on the EQ basically untouched so the EQ is in a u shape when I have it set the way I like it. Your help would be greatly appreciated and if I'm posting somewhere I shouldn't be or doing something wrong I apologize ahead of time as I'm newer 2 XDA and still learning. That's what this sites about isn't it? Anyway I'm out to do some errands but we'll check back later.
I'm ghost for a few hours. I will paste the output that I found in the app for you guys to view below. If somebody needs debugging info I can grab that later but I got to run right at the moment.
08:25:00.796 v3-build-860-arm64-play
Device: lge LGE LM-G710 judyln_lao_com sdm845 [arm64-v8a, armeabi-v7a, armeabi]
reading=/vendor/etc/audio_output_policy.conf
has direct_pcm_24, sampling_rates=44100|48000|88200|96000|176400|192000|352800|384000
AUDIO_OUTPUT_FLAG_DIRECT direct_pcm_24
has direct_pcm_24 formats=AUDIO_FORMAT_PCM_24_BIT_PACKED|AUDIO_FORMAT_PCM_8_24_BIT|AUDIO_FORMAT_PCM_32_BIT
FLAG_VARIANT_DIRECT_HD via direct_pcm_24
forcing FLAG_DLFCN FLAG_NEEDS_DEEP_BUFFER FLAG_NEEDS_EXTRA_SLEEPS
LG PA_OUTPUT_CAP_NEEDS_VOL_UI
USB can handle Hi-Res - sdk=28
OK flags=0x874616600008000
FLAG_VARIANT_DIRECT_HD
FLAG_SUPPORTS_PCM_8_24
FLAG_SUPPORTS_PCM_24
FLAG_SUPPORTS_PCM_32
FLAG_SUPPORTS_UNITY_GAIN_STREAM
FLAG_SUPPORTS_USB
FLAG_NEEDS_EXTRA_SLEEPS
FLAG_SUPPORTS_LDAC
FLAG_DLFCN
FLAG_NEEDS_DEEP_BUFFER
FLAG_ALLOW_DVC_EFFECT
FLAG_BT_DVC_EFFECT
PA_OUTPUT_CAP_NEEDS_VOL_UI
INTERNAL_OUTPUT_FLAG_SR_384K
INTERNAL_OUTPUT_FLAG_SR_352K
INTERNAL_OUTPUT_FLAG_SR_192K
INTERNAL_OUTPUT_FLAG_SR_176K
INTERNAL_OUTPUT_FLAG_SR_96K
INTERNAL_OUTPUT_FLAG_SR_88K
INTERNAL_OUTPUT_FLAG_SR_48K
INTERNAL_OUTPUT_FLAG_SR_44K
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my preferred EQ settings with gain, far left at +/- 0. (Cut from shot)
I've turned off anything that involves volume ducking and EQ lowering when close to max db boost (as they claim in order to protect peoples headphones and or ears I can't remember which bull crap they were pushing but it's nonsense) if somebody is afraid their child might turn the volume to full blast and deafen themselves then they shouldn't let their child use their device unsupervised or they could use an app to lock the volume maximum. I know this **** is possible because it happened to me and I used it that way all that night. I just don't know how I triggered the massive increase in sound without distortion but bass and treble as if I was in a car with a banging system Pershing 5 to 10,000 Watts into two 18in subwoofers and I'm not lying, I couldn't believe my Dre headphones weren't just storing it was so loud. I just need help finding a way to replicate or alter the right settings to get things the way I want them and the bonus would be it would all be done without viper4android meaning your sample rate wouldn't be maximum 48k but it would go up to 320 k like the quad DAC is meant to which would be a way better situation. Any audio files out there who are also bass heads and into hip-hop and like it loud that can help me? No idea is a stupid idea so please toss anything in that you can think of.
If anybody is wondering I found what was causing my annoying quiet headphones. Well not quiet butt stock volume. I can't recall which switch I flicked but I grabbed a backup meaning and export of all my power amp settings and when hooked into my stereo or headphones the volume is way louder and hits like you wouldn't believe on the Doctor Dre headphones anyway. The volume switch you have to be careful with because it can be stock sound and then two clicks of an increase can drastically increase the volume. Don't blame me if you blow your speakers or damage your headphones but I have a link here that contains my Poweramp paid version settings export file and if you load it into yours you should get a much louder sound out of your phone. Download using your own discretion and if you're too dumb to know what discretion means then you probably should not use this file. I hold no liability for anyone who damages anything I am just providing this file for those who know what they are doing and are willing to take the risk to get a much louder volume and EQ bandwidth out of their LG G7 ThinQ.
https://mega.nz/#!0B9ByYxY!kv8lZpX50oS3s_vxgheNQJ7BGJfegKo5QMOWodUe-o0
Enjoy, just remember small adjustments of the volume can increase the output and volume level drastically so turn that up using patience not urgency. Haha that's funny I started and finished my own forum in a matter of a few hours when it took me three days before and I got nowhere. oh well hopefully somebody can get some use out of this, quiet music pisses me off. Enjoy and au revoir!
Did u tried to open severall app at same time that need to use the dac indeep? It looks like a crash on the audio device for some reason. When im on Windows, my other pc sometimes crashes the audio driver when I open music player, morphvox(mic tunner with troll effects), team speak and a game. The driver looks like crashed, and the sound comes distort and with metal echo.
Should open games, ig videos and other things as a call at same time for test If the "gain" come back. Is not too much help, but I know the braindead that produces find the solution on audio settings on Android, so I wish it help u
If the headphones have a detachable cable, connect cable to the phone first then plug it into the headphones.
TWiiTCH said:
My phone is an LG G7 thinq and the sound quality is great with my Dre headphones but I was messing around with a ringtone app and I'll tell you now that I use Poweramp if you didn't notice in the title. for some reason I was increasing the volume on a few ringtones and went back in to listen to music in Poweramp pro and for some reason the volume was almost double. I mean it sounded like I was in a car with two 18 inch subwoofers in the trunk and pushing 4000 watts into each one. There was absolutely no distortion and this lasted until I turn the phone off for the night and when I came back the next day to try it out and see if it was still working that way the volume had returned to what was the usual. It has great sound quality but it pisses me off that governments or manufacturers or whoever it is limits the volume level in order to protect our ears. should we be the ones to decide if we want to go deaf? Hahaha like somebody would actually try to cause themselves harm. Anyway when I had a ton of bass and volume I created a backup or an export of my settings but when I try to import the settings the bass and volume did not increase the way it was after I had been messing with my ringtone app. I haven't been able to mimic this again and the only thing I can tell you is I have the Canadian Snapdragon model that I don't believe is rootable yet so does anyone know how I can increase the volume and base which I'm guessing will involve turning the power up somehow on the amplifier to achieve this or is it a lost cause? I tried about 20 different apps that were supposed to boost the volume and or the base and most did one or the other but if you boosted volume and base the sound actually got quieter in order to compensate for the excess bass I'm guessing. I want to know if there is a way to edit code or mess with the amplifier or change any files in order to achieve that evening of bliss where I did not need to go out in my ride and wake the neighbours. has anyone else found a glitch that causes this to happen and knows how to make it happen repeatedly? And why when you increase the volume level well the gain on the slider or any of the bass or treble sliders on the EQ why does the volume decrease when doing so when turning up the bass or treble most people's reason is because they want that particular part of sound to be increased not decreased and fine-tuned. I don't mind screwing up this phone in order to try and achieve this so if there are any suggestions please holler at me because I have found nothing and have been trying for 3 days now, not constantly I do stop to eat and pee and all that plus deal with family and kids but on my free time the past 3 days have been a big fail.
Somebody let me know what files to edit and how to edit them and if it's possible to edit them on an unrooted phone and I need methods that work on an unrooted phone unless somebody can point me to a root method that works on the LG G7 thinq and I will attempt it even though installing viper4android is what I'm going for. I know this will be counterproductive when it comes to sound quality but I'm more into the volume level and just clean and clear bass and treble with vocal on the EQ basically untouched so the EQ is in a u shape when I have it set the way I like it. Your help would be greatly appreciated and if I'm posting somewhere I shouldn't be or doing something wrong I apologize ahead of time as I'm newer 2 XDA and still learning. That's what this sites about isn't it? Anyway I'm out to do some errands but we'll check back later.
I'm ghost for a few hours. I will paste the output that I found in the app for you guys to view below. If somebody needs debugging info I can grab that later but I got to run right at the moment.
08:25:00.796 v3-build-860-arm64-play
Device: lge LGE LM-G710 judyln_lao_com sdm845 [arm64-v8a, armeabi-v7a, armeabi]
reading=/vendor/etc/audio_output_policy.conf
has direct_pcm_24, sampling_rates=44100|48000|88200|96000|176400|192000|352800|384000
AUDIO_OUTPUT_FLAG_DIRECT direct_pcm_24
has direct_pcm_24 formats=AUDIO_FORMAT_PCM_24_BIT_PACKED|AUDIO_FORMAT_PCM_8_24_BIT|AUDIO_FORMAT_PCM_32_BIT
FLAG_VARIANT_DIRECT_HD via direct_pcm_24
forcing FLAG_DLFCN FLAG_NEEDS_DEEP_BUFFER FLAG_NEEDS_EXTRA_SLEEPS
LG PA_OUTPUT_CAP_NEEDS_VOL_UI
USB can handle Hi-Res - sdk=28
OK flags=0x874616600008000
FLAG_VARIANT_DIRECT_HD
FLAG_SUPPORTS_PCM_8_24
FLAG_SUPPORTS_PCM_24
FLAG_SUPPORTS_PCM_32
FLAG_SUPPORTS_UNITY_GAIN_STREAM
FLAG_SUPPORTS_USB
FLAG_NEEDS_EXTRA_SLEEPS
FLAG_SUPPORTS_LDAC
FLAG_DLFCN
FLAG_NEEDS_DEEP_BUFFER
FLAG_ALLOW_DVC_EFFECT
FLAG_BT_DVC_EFFECT
PA_OUTPUT_CAP_NEEDS_VOL_UI
INTERNAL_OUTPUT_FLAG_SR_384K
INTERNAL_OUTPUT_FLAG_SR_352K
INTERNAL_OUTPUT_FLAG_SR_192K
INTERNAL_OUTPUT_FLAG_SR_176K
INTERNAL_OUTPUT_FLAG_SR_96K
INTERNAL_OUTPUT_FLAG_SR_88K
INTERNAL_OUTPUT_FLAG_SR_48K
INTERNAL_OUTPUT_FLAG_SR_44K
This is my preferred EQ settings with gain, far left at +/- 0. (Cut from shot)
I've turned off anything that involves volume ducking and EQ lowering when close to max db boost (as they claim in order to protect peoples headphones and or ears I can't remember which bull crap they were pushing but it's nonsense) if somebody is afraid their child might turn the volume to full blast and deafen themselves then they shouldn't let their child use their device unsupervised or they could use an app to lock the volume maximum. I know this **** is possible because it happened to me and I used it that way all that night. I just don't know how I triggered the massive increase in sound without distortion but bass and treble as if I was in a car with a banging system Pershing 5 to 10,000 Watts into two 18in subwoofers and I'm not lying, I couldn't believe my Dre headphones weren't just storing it was so loud. I just need help finding a way to replicate or alter the right settings to get things the way I want them and the bonus would be it would all be done without viper4android meaning your sample rate wouldn't be maximum 48k but it would go up to 320 k like the quad DAC is meant to which would be a way better situation. Any audio files out there who are also bass heads and into hip-hop and like it loud that can help me? No idea is a stupid idea so please toss anything in that you can think of.
If anybody is wondering I found what was causing my annoying quiet headphones. Well not quiet butt stock volume. I can't recall which switch I flicked but I grabbed a backup meaning and export of all my power amp settings and when hooked into my stereo or headphones the volume is way louder and hits like you wouldn't believe on the Doctor Dre headphones anyway. The volume switch you have to be careful with because it can be stock sound and then two clicks of an increase can drastically increase the volume. Don't blame me if you blow your speakers or damage your headphones but I have a link here that contains my Poweramp paid version settings export file and if you load it into yours you should get a much louder sound out of your phone. Download using your own discretion and if you're too dumb to know what discretion means then you probably should not use this file. I hold no liability for anyone who damages anything I am just providing this file for those who know what they are doing and are willing to take the risk to get a much louder volume and EQ bandwidth out of their LG G7 ThinQ.
https://mega.nz/#!0B9ByYxY!kv8lZpX50oS3s_vxgheNQJ7BGJfegKo5QMOWodUe-o0
Enjoy, just remember small adjustments of the volume can increase the output and volume level drastically so turn that up using patience not urgency. Haha that's funny I started and finished my own forum in a matter of a few hours when it took me three days before and I got nowhere. oh well hopefully somebody can get some use out of this, quiet music pisses me off. Enjoy and au revoir!
Click to expand...
Click to collapse
Root is required to edit mxerpaths.xml. I think that's still the file name.
You would edit this file in the phone and any app installed would be awesome.
netookska05 said:
Root is required to edit mxerpaths.xml. I think that's still the file name.
You would edit this file in the phone and any app installed would be awesome.
Click to expand...
Click to collapse
I'm on a note 10+ now. Gave the LG G7 to my daughter. Would it be the same file on any phone and do I need root to do the editing of the file? Is it a system app file or user file I could edit without root?
I appreciate your help. Talk soon.
Never mind I see in your title that I need root and I would imagine on the Note 10 plus you would need root also. Thanks for the update though and I took down the filename in case I jailbreak this phone
TWiiTCH said:
I'm on a note 10+ now. Gave the LG G7 to my daughter. Would it be the same file on any phone and do I need root to do the editing of the file? Is it a system app file or user file I could edit without root?
I appreciate your help. Talk soon.
Never mind I see in your title that I need root and I would imagine on the Note 10 plus you would need root also. Thanks for the update though and I took down the filename in case I jailbreak this phone
Click to expand...
Click to collapse
The name of the file for the g7 is mixer_paths_tavil.xml located under system/ etc folder. Good luck
Anyone else getting the same thing? It's not a problem but it's like lowering the volume for a sec in certain parts of the song. Is it like a feature to avoid destroying the speaker or something? Have 0 clue but curious. Not bothering me or anything as well.
P.S. speakers are so damn well clear and loud, 11/10
Sound like volume limiting is active. Find it in settings. In my Samsung Galaxy phone it's buried deep so look around.
Could also be a 3rd party apk doing it.
Anyone have a LG v30 that can compare the output in high gain vs the rog 5 ?
It does sound like some sort of speaker protection. Did you EQ the speakers with heavy lows/mids? You can also try to enable outdoor mode in sound settings.
Settings -> Sound & vibration -> AudioWizzard may have some options to offset the issue