Related
Is there a dedicated in Car Kit for the new XDA II yet? I have read that the original XDA kit could be compatible but am interested in knowing if an updated kit has been launched and if so where I can order it.
Ed
I informed at a shop selling MDa's about that :
They expect the O2 XDA/MDA II carkit in Januari 2004.....
There is a car kit, which is used when you have Tom Tom installed, but I believe you can purchase of eBay. XDAII will fit provided you take off the battery cover first.
Steve
Stevepda said:
There is a car kit, which is used when you have Tom Tom installed, but I believe you can purchase of eBay. XDAII will fit provided you take off the battery cover first.
Steve
Click to expand...
Click to collapse
Steve do you have any links to or pics of this unit? I presume removing the battery cover is to gain access to the internal bus connection socket.
Ed
http://klingtech.dk/produkter/qtek-2020.php
here in the buttom there is a car kit which they sell as a xda2 thing
not sure if it's just the old car kit though
Rudegear,
I am currently in Denmark and trying to decide if I should get the Qtek 2020 here or wait till I am back in the asia-pacific area and get an Xda label.
Anyway on the klingtech site they state 32M ROM, is this correct? The Xda site says 64M ROM.
Thanks,
Nick
not sure about the rom size but as far as i know then all
Himalaya's are the same hardware wise
if you should buy or wait i think should be a question of price vs. waiting
but klingtech is not the cheapest place to get it it's cheaper here
http://www.pdashoppen.dk/product.asp?product=5450&page=1
http://www.salgsbutikken.dk/frames.asp?mainpage=frontpage.asp&catid=
Hello, has anyone seen the original HTC car kit, made by Herbert Richter, for Diamond? I wish to buy one cos I had one for my Touch cruise and it's very good in quality.
Cheers!
something like it
looks nice.
now to find someone who sells them
I bought the Gripper 3 from HR Richter with holder Global 9
I now have a E-ten M700 with original holder, the back and sides of the phone now have scratches because of the holder.
So if you want to protect you're phone against scatches buy a universal holder,
and every time you buy another phone you don't have to buy another holder.
sandervanzijl said:
looks nice.
now to find someone who sells them
Click to expand...
Click to collapse
looks really nice. Found this one on google for us dutch people(nog geen voorraad):
http://onbekend.centralpoint.nl/adapt/ad0215/active-car-holder-htc-diamond/
available from 26 of juni.
is ok, i do not have my diamond yet ;-)
Anyone know how you can actualy buy the mount in the post above
http://www.adapt-mobile.com/mobile/detail.php?p_id=396
There is no buy button, I m assuming they are the manufacturers or dealers or soemthing.
I had one of those adaptive mount before it was the clunkiest piece of garbage I ever owned.
Just wait for the Brodit I have one for my Vario and it really holds ik like a rock.
asing said:
Just wait for the Brodit I have one for my Vario and it really holds ik like a rock.
Click to expand...
Click to collapse
Hi Simon,
We don’t have any holder for the HTC Diamond right now.
Please see our website www.brodit.com later in the summer for more information of upcoming news.
Best Regards
Linda Sagar
Tel direct +46 (0)505 177 74
[email protected]
Brodit AB
Tel +46 (0)505 109 00
Fax +46 (0)505 445 72
Gesällvägen 8
546 34 KARLSBORG, Sweden
[email protected] www.brodit.se
Mounting Solutions for Vehicle Communication Accessories
--------------------------------------------------------------------------------
Från: Simone R.
Skickat: den 13 juni 2008 18:09
Till: Eleonore Hermansson
Ämne: Holder for HTC Diamond
Hi and sorry for my bad english...
I not have found the car holder for my HTC Touch Diamond P3700...
Is not ready?
Best regards.
Simon.
Sirius75it said:
Hi Simon,
We don’t have any holder for the HTC Diamond right now.
Please see our website www.brodit.com later in the summer for more information of upcoming news.
Best Regards
Linda Sagar
Tel direct +46 (0)505 177 74
[email protected]
Brodit AB
Tel +46 (0)505 109 00
Fax +46 (0)505 445 72
Gesällvägen 8
546 34 KARLSBORG, Sweden
[email protected] www.brodit.se
Mounting Solutions for Vehicle Communication Accessories
--------------------------------------------------------------------------------
Från: Simone R.
Skickat: den 13 juni 2008 18:09
Till: Eleonore Hermansson
Ämne: Holder for HTC Diamond
Hi and sorry for my bad english...
I not have found the car holder for my HTC Touch Diamond P3700...
Is not ready?
Best regards.
Simon.
Click to expand...
Click to collapse
later in the summer? are they nuts? how about in one week please!
hsct said:
Hello, has anyone seen the original HTC car kit, made by Herbert Richter, for Diamond? I wish to buy one cos I had one for my Touch cruise and it's very good in quality.
Cheers!
Click to expand...
Click to collapse
http://www.expansys.pl/p.aspx?i=169746
I want to buy Herbert Richter GRIPPER 3 for the diamond but can anyone suggest which kind of arm buy? I have a Toyota Yaris and the windscreen it's far away from driver...
i think this one it's ok: Herbert Richter GLOBAL 2 Banana Suction Mount but it's sufficient long ?
the other two are: Herbert Richter GLOBAL 4 Rotating Tower Suction Mount
Herbert Richter Gooseneck Suction Mount
gooseneck can be long enough but what about vibrations ??
TNX
Sirius75it said:
Please see our website www.brodit.com later in the summer for .
Click to expand...
Click to collapse
Linda, this is what we call BAD timing from a manufacturer point of view.
Your team's were not aware about this upcoming product
It would take me 10 days to make a mold in Guangzhou, so I guess you're having other issues @ brodit no?
So, Proclip, or holdmyphone.com will neither obtain the holder as they buy from Brodit SE ?
I paid 106 USD for a Brodit Honda CRV clip + holder for my TytnII, and I do not complaint about the fricking price for 2 pieces of plastic , but at least I and many others hope on a good - quick - service.
Just my two cents.
I've the Universal carkit of HTC. I sale him. So contact me with a pm!!
Both Clickable
ceevee369 said:
Linda, this is what we call BAD timing from a manufacturer point of view.
Your team's were not aware about this upcoming product
It would take me 10 days to make a mold in Guangzhou, so I guess you're having other issues @ brodit no?
So, Proclip, or holdmyphone.com will neither obtain the holder as they buy from Brodit SE ?
I paid 106 USD for a Brodit Honda CRV clip + holder for my TytnII, and I do not complaint about the fricking price for 2 pieces of plastic , but at least I and many others hope on a good - quick - service.
Just my two cents.
Click to expand...
Click to collapse
respons to my mail today
Hi Joep
I can gladly inform you that we are just now
making solutions for the HTC Diamond.
They should be ready for delivery in a few weeks.
Best Regards
Lars-Olof Dufva
Brodit AB
joep1962 said:
respons to my mail today
They should be ready for delivery in a few weeks.
Brodit AB
Click to expand...
Click to collapse
Right, end of summer it will be
PS. like your signature kerel!
Brodit passive Holder:
Item no. 848843
HTC Touch Diamond For all countries
Brodit Active Holder
As I saw the active holder has arrived!
Check the brodit homepage!
Hi All,
I have been asked by a few users to post that Brodit have now prepared a full range of Diamond holders, and all are currently being manufactured with pre orders being taken to ensure delivery as soon as the 1st stocks arrive.
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch%20Diamond-Brodit-Holder.asp
The range available is:
1) Passive (no charging but you can plug in your own charging cable)
2) Active (charging via cig lighter lead moulded into the holder)
3) Active ( for fixed installation via open cable connection to vehicles Power supply)
4) 3 in 1 ( in essence a passive holder, but with a 40cm long 3 in 1 connection adapter to plug in your own charger lead, headset and audio out if required)
5) 3 in 1 ( as above, in essence a passive holder, but with a 3cm long 3 in 1 connection adapter to plug in your own charger lead, headset and audio out if required)
Hope this helps, let me know if you have any questions, ill try my best to respond;
Many Thanks
Dave (aka Bryson - long time user but didnt want to be accused of spamming so registered as the company name)
modrzew said:
http://www.expansys.pl/p.aspx?i=169746
Click to expand...
Click to collapse
Guys,
This Herbert Richter holder comes without the arm right?
Can this holder be used with the arm that comes with the P3300/Cruise? (It's from Germany, and I don't know the name)
Coz I have P3300 arm which I used for the Cruise as well (just changed the holder). Really good arm, and I wish to continue using it with the diamond.
Thanks!
I've looked everywhere, but can't find a decent carkit/active-holder for my MDA Compact IV.
I've tried the 'Brodit Active Holder for the Touch Diamond', but it doesn't fit due to the rounded corners.
Is there an active-holder for the MDA Compact IV?
Hope so...
tim_allewijn said:
I've looked everywhere, but can't find a decent carkit/active-holder for my MDA Compact IV.
I've tried the 'Brodit Active Holder for the Touch Diamond', but it doesn't fit due to the rounded corners.
Is there an active-holder for the MDA Compact IV?
Hope so...
Click to expand...
Click to collapse
That's interesting and helpful. www.brodit.com certainly reckon they have an active kit for T-Mobile Compact IV, but after your post I checked to see if this was a different part No from HTC Diamond, and sadly it was not.
I was just about to order one too. Does it just not fit well, or not at all?
EDIT
Hang on a minute, what exactly are you saying.
On inspection of the part number 968843 or 971843 I can't for the life of me understand how the rounded corners would make any difference.
From their website
Item no. 968843 fits:
HTC P3700 For all countries
HTC Touch Diamond For all countries
O2 XDA Diamond For all countries
O2 XDA Ignito For all countries
T-Mobile MDA Compact IV For Europe
Some more feedback from you would be really helpful
Lyrrad said:
That's interesting and helpful. www.brodit.se certainly reckon they have an active kit for T-Mobile Compact IV, but after your post I checked to see if this was a different part No from HTC Diamond, and sadly it was not.
I was just about to order one too. Does it just not fit well, or not at all?
Click to expand...
Click to collapse
Not at all! The salesman (at the pdashop.nl in The Netherlands) tried to place my MDA Compact IV into the Brodit active holder, but it wouldn't fit at all...
I hope there are other active holders for the MDA Compact IV...
Maybe CARCOMM or ADAPT active holders
tim_allewijn said:
Not at all! The salesman (at the pdashop.nl in The Netherlands) tried to place my MDA Compact IV into the Brodit active holder, but it wouldn't fit at all...
I hope there are other active holders for the MDA Compact IV...
Maybe CARCOMM or ADAPT active holders
Click to expand...
Click to collapse
I'm not looking for an argument here, and I fully understand that you went to pdashop.nl and the salesman could not get the Compact IV to fit, but is there the slightest chance that the salesman did not have the diamond/compact IV active holder (in other words the htc diamond would not have fitted either.).
I understand that the compact iv has rounded edges, but I believe the USB terminal is in the same place. I also believe that they are the same thickness and width. The design of the Brodit (of course I'm just looking at a web picture) does not indicate that rounded corners could cause the problem.
I have not compared diamond to compact iv side by side, but in your opinion where was the problem. I can only think it must be the side holders.
Lyrrad said:
I'm not looking for an argument here, and I fully understand that you went to pdashop.nl and the salesman could not get the Compact IV to fit, but is there the slightest chance that the salesman did not have the diamond/compact IV active holder (in other words the htc diamond would not have fitted either.).
I understand that the compact iv has rounded edges, but I believe the USB terminal is in the same place. I also believe that they are the same thickness and width. The design of the Brodit (of course I'm just looking at a web picture) does not indicate that rounded corners could cause the problem.
I have not compared diamond to compact iv side by side, but in your opinion where was the problem. I can only think it must be the side holders.
Click to expand...
Click to collapse
On the box, I saw that the brodit holder was for the Touch Diamond, there was also a dummy of the Touch Diamond in that store, and I held my MDA Compact IV next to it. The back is so much different. Everything on the Compact IV is rounded and maybe just a little thicker...
From the specs
TM Compact IV 101 x 52 x 12
HTC Diamond 102 x 51 x 11
I have spoken to the following company in the UK
http://www.dsldevelopments.com
They assure me that the HTC Diamond brodit kit is fine for the TMobile Compact IV. They actually fit a comparable phones into the cradle prior to offering the unit on their website.
I mentioned your issue and they said that normally when this kind of thing happens, one would find that the unit itself was faulty. Apparently the cradle itself is hand finished [his words not mine] and sometimes a rogue unit can be manufactured. So his belief is that the diamond would also not fit into that actual unit.
From the specs on the previous post I would be almost certain that a tolerance of 1mm would not be the issue.
Anyway, the company above do export,and the cost of a telephone conversation should not be too expensive. Call and speak with a guy called Dave or Alan (sorry I can't remember).
However I suggest you go back to pdashop.nl and try another unit.
Hope this matter will be resolved. I can't quite make up my mind which fixture to choose yet, so I am not in a position to order.
However if mine does not fit, I have been promised full refund.
Lyrrad said:
I have spoken to the following company in the UK
http://www.dsldevelopments.com
They assure me that the HTC Diamond brodit kit is fine for the TMobile Compact IV. They actually fit a comparable phones into the cradle prior to offering the unit on their website.
I mentioned your issue and they said that normally when this kind of thing happens, one would find that the unit itself was faulty. Apparently the cradle itself is hand finished [his words not mine] and sometimes a rogue unit can be manufactured. So his belief is that the diamond would also not fit into that actual unit.
From the specs on the previous post I would be almost certain that a tolerance of 1mm would not be the issue.
Anyway, the company above do export,and the cost of a telephone conversation should not be too expensive. Call and speak with a guy called Dave or Alan (sorry I can't remember).
However I suggest you go back to pdashop.nl and try another unit.
Hope this matter will be resolved. I can't quite make up my mind which fixture to choose yet, so I am not in a position to order.
However if mine does not fit, I have been promised full refund.
Click to expand...
Click to collapse
THANKS a lot!
I will go back to the pdashop.nl to try other active Brodit holders and let you all know the results!
anyone know a cheap site to get these from? i priced it up and it's gonna be like £45 with the car mount also, and this was from http://www.dsldevelopments.com
I ordered the Brodit proclip from Morpethmobiles for £14.95 delivered and the Brodit passive holder from www.qfonic.com for £16.95, both prices included delivery
The holder is for the Diamond as I couldn't find a dedicated mdac4 one, but reading around the consesus is that it they are the same
I'm just waiting delivery. Morpethmobiles has taken a while, but then again they have probably been under water for a week!
just ordered this: http://cgi.ebay.co.uk/HTC-Touch-Dia...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
I've got a Carcomm CMPC-129 MOBILE SMARTPHONE CRADLE HTC TOUCH DIAMOND P3700. It fits perfectly for my MDA Compact IV.
http://www.carcomm.nl/carcomm/websh...ProductId=57F3F689-5056-8659-086FE80C261B4BB7
hey there, any chance of a pic of your compact iv in the cradle?
I'm not doubting you at all its just i'd like to see how it fits in and relate that back to the promo pic you posted with the diamond in to see the difference.
Thanks
Damian
I bought a Brodit car cradle with 3 in one adapter that fits my O2 Ignito perfectly. Got mine from Expansys UK but there are a number of websites that sell it, just google it for the best price.
On the Brodit.se website there is 2 different versions of the passive holder:
848843 - this looks like the standard 'Diamond' holder
848862 - this looks similar to the 'MDA compact IV' as its also got rounded corners on the phone!
I recommend car holders from German company Herbert Richter. Everything is made in Germany si you can expect quality to be great. There's a wide selection of suck mounts with replaceable dedicated mounts. This way I've had the same holder since vario II. plus Touch Diamond dedicated holder is a good fit for compact IV. You can get them on eBay or from expansys.
a nice one if you want your MDA compact IV in landscape mode.
from Ebay
I have used HR-parts on my previous PDAs as well. While HR does not provide holders for every device on the market, what they offer is of good build quality and works just fine.
They have been a long-time OEM-supplier for HP/Navigon-bundles.
Have fun!
tim_allewijn said:
I've looked everywhere, but can't find a decent carkit/active-holder for my MDA Compact IV.
I've tried the 'Brodit Active Holder for the Touch Diamond', but it doesn't fit due to the rounded corners.
Is there an active-holder for the MDA Compact IV?
Hope so...
Click to expand...
Click to collapse
Maybe this will do? http://forum.xda-developers.com/showthread.php?t=463753 bought is for 25€ ok its a lot of money and to start sawing in such a item isn't something what makes it better but whit a smal multitool you can make it fit as you can see in the obove mentioned link I made it fit a 2000MAh battery and that need much more space as a MDA Compact (never thought I should help someone with a %$%&*^%#$#@@$%^^ T Mobile account)
Willem
This is my first post here so hello everyone!
Do you happen to know where can I buy back cover for toshiba tg01 (preferably Poland, but I doubt that I can buy it here) ?
I bought TG01 recently, it was cheap and was in perfect condition, but... there is no back cover. I've already tried ebay, couldn't find anything.
Thanks in advance.
Welcome! I think that the best way for you is buying a 2600 Muggen battery: It comes with its own back cover because this battery is oversized.
ThePeuJ said:
This is my first post here so hello everyone!
Do you happen to know where can I buy back cover for toshiba tg01 (preferably Poland, but I doubt that I can buy it here) ?
I bought TG01 recently, it was cheap and was in perfect condition, but... there is no back cover. I've already tried ebay, couldn't find anything.
Thanks in advance.
Click to expand...
Click to collapse
Or here in the tg01 forum, somebody has a dismantled one ...
TG01 back cover found
There is one seller on ebay UK selling the back covers.
The item # 220624488449
khatana said:
There is one seller on ebay UK selling the back covers.
The item # 220624488449
Click to expand...
Click to collapse
20 pound , what a joke
Any new ideas? My back cover is not in good condition. It does not fit very well and phone making noises when touched:/ Do You also experiencing it?
contact toshiba they will supply you the required spares, you neednt compromise in quality n standards too. Full set itself is 20 pounds in uk toshiba (black or white)both are available. Might be lil more by now + shipping.
Android newbie here, hello
I'm waiting for my Sensation to arriwe and I've tried to find webshop which sells charcheable car holder designed for Sensation, but haven't found one yet I've previously used Brodi's holder with my N900, but they don't have one for Sensation yet.
Any good ideas where to point my browser? Thanks in advance
d-iivil said:
Android newbie here, hello
I'm waiting for my Sensation to arriwe and I've tried to find webshop which sells charcheable car holder designed for Sensation, but haven't found one yet I've previously used Brodi's holder with my N900, but they don't have one for Sensation yet.
Any good ideas where to point my browser? Thanks in advance
Click to expand...
Click to collapse
HTC has it´s own charging car dock for this phone, as a original accessory, so get one from a htc dealer.
EnhancerFIN said:
HTC has it´s own charging car dock for this phone, as a original accessory, so get one from a htc dealer.
Click to expand...
Click to collapse
Oh, good! How did I miss that when I was browsing HTC's website
Will try to find one then. Thanks!
I am waiting for a Brodit Mount and one of the UK suppliers says its coming "soon"...
Andy-D said:
I am waiting for a Brodit Mount and one of the UK suppliers says its coming "soon"...
Click to expand...
Click to collapse
I also mailed to Brodit Sweden asking info about Sensation holder, but got no reply yet. Brodit would be the best solution for me as I don't want to stick anything to the windshield and don't want to drill any screws to my car's interior. I also have the car specific adapter for my car already where I can mount any brodit holder.
Brodit is of course a good choice too, specially if you have the base part already installed.
Dock for my nexus came with the kind of sticky platter to be placed on the dashboard, to which the suction cup took it's contact. It was quite good solution too.
The Brodit mount I had for my HD2 was perfect and I will wait for the sensation one as I have the car mount already and just need the phone mount.
I sit mine in my old HD2 mount for now... but cant wait for it to released!
d-iivil said:
Android newbie here, hello
I'm waiting for my Sensation to arriwe and I've tried to find webshop which sells charcheable car holder designed for Sensation, but haven't found one yet I've previously used Brodi's holder with my N900, but they don't have one for Sensation yet.
Any good ideas where to point my browser? Thanks in advance
Click to expand...
Click to collapse
Try www.expansys.com (or .nl). They sell the original HTC car holder.
Andy-D said:
The Brodit mount I had for my HD2 was perfect and I will wait for the sensation one as I have the car mount already and just need the phone mount.
I sit mine in my old HD2 mount for now... but cant wait for it to released!
Click to expand...
Click to collapse
I don't currently own a Sensation, but isn't the charger connection on the side of the phone? How's that gonna look/work? Having the phone in landscape is not something i would be fond of.
The brodit clip+holder for the HD2 still works like a charm for me. Hope the sensation one will be just as good, since it's kinda holding me from getting one now.
Brodit
Just look on brodit for the Active Holder for HTC Wildfire S
That's how it will looks for the sensation
That's a bit of a bummer, just doesn't look good :x
Well, Brodit passive holder for the Sensation has been launched, so I'm guessing active holder won't be far behind.
Esspee_London said:
Well, Brodit passive holder for the Sensation has been launched, so I'm guessing active holder won't be far behind.
Click to expand...
Click to collapse
Active is launched too, will probably order one Monday or Tuesday.
http://cgi.ebay.com/ws/eBayISAPI.dl...9&ssPageName=ADME:X:RTQ:US:1123#ht_500wt_1156
passive