I have been on the KaiSer forum for the last few months. As from my signature below, I have been lurking for a long while at the Universal forum. Thus, my acquaintance with master-chef Leo.
The first thing, I did when I got my att tilt early this month was to install the Hard SPL and then install L26_WM6.1_PRO v1 (Based on the AT&T 209 build) from the following thread:
http://forum.xda-developers.com/showthread.php?t=381837
When I tried to install the IMAGiNet Arabizer, it didn't install at all. Being a ROM flashing junkie from the Universal forum, I wasn't surprised at all. I had encountered this problem once in the past, even though clearing the prior install after the new flash
I encountered the same problem with Leo's v2, which was recently released on 24 April, 2008.
Being a flash junkie, I tried some of the Dutty's ROM released from during March and April. Didn't encounter any problem with these ROMs.
During April the TNT 19202 Series ROM was released too by Its Right. The IMAGiNet Arabizer didn't install with this ROM too.
http://forum.xda-developers.com/showthread.php?t=385900
But, I could install the InforMobility Arabizer on all these three ROMs, two by Leo and one by Its Right.
Both these IMAGiNet Arabizer and InforMobility Arabizer are paid programs and come with several modules. IMO the IMAGiNet is a better product than InforMobility.
Secondly, one of the beauty of KaiSer ROMs is that they are UC capable. Thus, it is frustrating that during the SDConfig process a software refuses to install as this knowledge is not previously known.
I have uploaded the two main modules for the IMAGiNet Arabizer. They have a trial period of one month.
Can some of the masters on this forum and everyone else help to resolve this problem that why the IMAGiNet Arabizer doesn't work on some ROMs?
Many thanks in advance!
KOR!
Also, this is what I found on Leo's ROM. I am not sure if the problem is related to the above.
odyseus said:
Anybody tried using Wifirouter v1.01 with this build?? Because I cannot install this application (Installation unsucessfull)??
I was able to install this application on dutty's builds etc???
Cheers Ody
http://forum.xda-developers.com/showthread.php?t=381837&page=37
Click to expand...
Click to collapse
It all has to do with the 19209 build. I am able to install all the programs you listed without any problems using Dutty's April 1st Hybrid ROM. I also was able to install and use iGO 2006 and MSVC.
One thing though, MSVC will stop working after a couple of uses if it is mapped to the PTT button, or any button that has the press and hold capability. So I mapped the MSVC to button # 4 ( OK Button).
I am using a 8GB Micro SD Card as well, however, when I create a folder on the SD card, any dll file that I save there will NOT show or display!
I have tried all ROMs there is and finally realized the best ROM for my purposes is Dutty's April 1st Hybrid.
Just my 2 cents...
Hi Asfoor,
Thanks for your reply.
Excellent observation!
I am not sure, as I believe that Dutty's April 9 and updated April 16, is a hybrid ROM 19209.
So, is Leo's v1 is a hybrid ROM 19209.
And more importantly, why doesn't IMAGiNet Arabizer install on 19209 ROM?
Thanks,
Mohamed
It is not related to any build, Imaginet Arabizer is not compatible with WM6.1.
Version 3.42 runs perfectly fine on all WM6 roms but will not run on WM6.1
Regards.
Tomtom
Love the ROM and it works great! No problems yet. Better then Duttys I think
Can anyone link me to a Tomtom download that will work for this ROM please?
Also, are there any threads or sites that list optional appz that can be installed on this ROM?
Mohamad, Just flash with this ROM:
http://rapidshare.com/files/104126132/Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_.zip
I have tested almost every ROM ever cooked and found this ROM to be the most stable and robust. the radio combo is is paramount; 1.64.08.21. Just try it and you will be pleased. And if you install the new HTC Home Customization program you can keep changing the icons and themes and it will feel you have a new ROM altogether...
shafez said:
It is not related to any build, Imaginet Arabizer is not compatible with WM6.1.
Version 3.42 runs perfectly fine on all WM6 roms but will not run on WM6.1
Regards.
Click to expand...
Click to collapse
Not true... I have it on my WM6.1 Hybrid and working fine (or as intended for it to work), using the Rom I just pointed to via Rapidshare.
I also find that In4mobility is better than Imaginet Arabizer, as the issues with Imaginet are mutually suffered by all WM Versions; Stability issues, Freezing, and slowness.
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
King of Rapture™ said:
Hi Asfoor,
Thanks for your reply.
Excellent observation!
I am not sure, as I believe that Dutty's April 9 and updated April 16, is a hybrid ROM 19209.
So, is Leo's v1 is a hybrid ROM 19209.
And more importantly, why doesn't IMAGiNet Arabizer install on 19209 ROM?
Thanks,
Mohamed
Click to expand...
Click to collapse
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
The problem is that windows refuses the installation giving the error "installation unsuccessful". It may be related to certification or something like that. I believe a chef like you can get it for us as many of us are not using some good ROMs for that reason.
Thanks
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Leo... Good to see you here... also excited about your release on Monday for a new build ROM. Keep us posted. I am wondering if you are gonna do without HTC Home this time around.
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
hbahaie said:
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
Click to expand...
Click to collapse
Hi hbahaie, does Mobidiv 407 support the real keybord, cause I am using it a lot. thanks
walker said:
Hi hbahaie, does Mobidiv 407 support the real keybord, cause I am using it a lot. thanks
Click to expand...
Click to collapse
yes via the program AEKmap, the master TSD in ce4arab has a nice thread about all of the sory, please search for it there.
Imagent (=Mobidiv New Version) Arabizer is compatible on most (85%)of the roms
I had similar problem before (error installation)
The conditions needed for successful installation
1-Make Sure that you manually remove all Arabizer folders wither Imagnet or in4mobility from you storage card (if you installed any prior applications on SD)
2-After flashing any new rom, Arabizer Cabs Must Be the FIRST TO BE INSTALLED preferably on the main memeory.
I agree there are few roms you will not be able to succeed
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Hi Laurentius26
Thanks for your interest in helping us with this issue, I really like your roms
its my favorites actually
The problem with the Arabizer software (Imaginet/Mobidiv) is that it can not install , it will give an immediate message of (installation unsuccessful) as soon as I choose the destination drive.
this is true in almost all wm6.1 except all dutty's roms !
I thought the problem was with registry since duttys do a lot registry tweaks.. so I made a comparison between duttys registry and yours trying to figure out the differences... but no luck
I also managed to trace the CAB execution through IDA assembler to see why the file is refusing to install but no luck.. since I don't know how do this with a cab file... I usually do it with exe and dll
for now I am sticking with duttys rom since they are my only choice. and I really missed you ROMs
hbahaie said:
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
Click to expand...
Click to collapse
Salam brother hbahaie,
Thank you for your welcome. Nice to see some old faces, it makes me fell home.
Sorry, to reply a bit late. Was doing some more research. The problem with both IMAGiNet and MOBiDIV is that they both refuse to install on Leo's ROM. Giving the message "installation unsuccessful". This is with Leo's all ROMs, whether hybrid or not. However, the InforMobility (Fejebi ein) does work on Leo's ROM and as you mentioned it is not so beautiful.
hbahaie said:
yes via the program AEKmap, the master TSD in ce4arab has a nice thread about all of the sory, please search for it there.
Click to expand...
Click to collapse
Thank you for your help on master TSD in ce4arab.
Mohamed
Laurentius26 said:
Hi KOR,
Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Hi mate,
Waiting for your release v3. Hopefully, you had the time by then to look into the IMAGiNet Arabizer. Thanks!
Regards,
KOR!
asfoor said:
Mohamad, Just flash with this ROM:
http://rapidshare.com/files/104126132/Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_.zip
I have tested almost every ROM ever cooked and found this ROM to be the most stable and robust. the radio combo is is paramount; 1.64.08.21. Just try it and you will be pleased. And if you install the new HTC Home Customization program you can keep changing the icons and themes and it will feel you have a new ROM altogether...
Click to expand...
Click to collapse
Hi Asfoor,
Thanks for your recommendation. At various times I had Dutty's ROMs from March to April, all of them.
I will try again tonight before Leo issues his v3, the ROM you have recommendation. I have a big problem with all Dutty's ROMs, that once the bluetooth is connect, the ring tone goes to bluetooth and I miss all the calls (miscalls).
Maybe, some registry tweak?
KOR!
the Arabizer software Mobidiv not working on Laurentius26 lates rom release V3
it works however with duttys latest one
what is the secret behind this
Does anyone know where i can find the password to unzip Dutty's WM 6.1 Hybrid rom V 2 I must be blind and cant seem to find it
Thank you!
Gary
Gary33411 said:
Does anyone know where i can find the password to unzip Dutty's WM 6.1 Hybrid rom V 2 I must be blind and cant seem to find it
Thank you!
Gary
Click to expand...
Click to collapse
i think he discontinued that rom version. There is a video explaining why he discontinued it HERE
Yes, that ROM has been discontinued due to people not reading the entire post!
Looking for a good WM 6.1 ROM
What would be a good ROM or what has replaced it? I would like a ROM with lots of extras Has Dutty released anything new or does anyone have the PW
Gary
Gary33411 said:
What would be a good ROM or what has replaced it? I would like a ROM with lots of extras Has Dutty released anything new or does anyone have the PW
Gary
Click to expand...
Click to collapse
are you kidding me? his rom is fine watch the video and *actually* read his first couple of posts. damn
Nobody is going to give you the password to a discontinued ROM because the Chef, Dutty in this case, officially killed off any support for it.
However, if you are referring to Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700, then let me assure you that the password is available in the thread... in plain sight.
Yes if you refer to Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 try to read secon post carefully...you will find it
Have just updated my MDA Vario 3 / MDA Vario III with this ROM (WM 6.1) from T-Mobile Support site and so far I have found the phone response has dropped, the "Letter Recognizer" is as jumpy as hell. Would still like to use a T-Mobile WM 6.1 ROM. Does anyone else have this problem?
Details...
ROM 3.31.110.3 WWE
ROM Date 09/01/08 (1st Sept 08 or 9th Jan 08 - not sure)
Radio vers. 1.70.18.02
Protocol vers 25.83.40.02H
Also noticed that this ROM version doesn't appear in the Wiki. Am I missing a trick here??? Was this ROM so bad that it wasn't even worth the mention??? Not surprised if that was the case.
bennyb0y said:
Have just updated my MDA Vario 3 / MDA Vario III with this ROM (WM 6.1) from T-Mobile Support site and so far I have found the phone response has dropped, the "Letter Recognizer" is as jumpy as hell. Would still like to use a T-Mobile WM 6.1 ROM. Does anyone else have this problem?
Details...
ROM 3.31.110.3 WWE
ROM Date 09/01/08 (1st Sept 08 or 9th Jan 08 - not sure)
Radio vers. 1.70.18.02
Protocol vers 25.83.40.02H
Also noticed that this ROM version doesn't appear in the Wiki. Am I missing a trick here??? Was this ROM so bad that it wasn't even worth the mention??? Not surprised if that was the case.
Click to expand...
Click to collapse
Try another Hard reset and see if that makes a difference. Ive had it before where a ROM seems really bad and another hard reset has cured it. always backup first though. It is worth a shot if you like the ROM features.
Cheers. Maybe I could also go nuts and try a different ROM, perhaps Duttys... Cannot seem to find the most popular one though.
bennyb0y said:
Cheers. Maybe I could also go nuts and try a different ROM, perhaps Duttys... Cannot seem to find the most popular one though.
Click to expand...
Click to collapse
Try Solace 3.1
only issue i found with it was opera doesnt work. it keeps restarting.
hi do you know if the above ROM has the 3D drivers embedded?
unlocksmith said:
Try Solace 3.1
only issue i found with it was opera doesnt work. it keeps restarting.
Click to expand...
Click to collapse
could you point us in the right direction for solace
thank you...
lohtse said:
could you point us in the right direction for solace
thank you...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=516142. hope that helps