Just installed ranjus rom with radio 1.18. Few questions...
1)it still comes up with the o2 splash screen when I turn on, and it asked me all the o2 question(it is originally an o2 xda exec). I wouldve thought installing a totally new rom wouldve wiped all this??
2) im now using my orange sim in it, but it won't connect to a 3G singal(it didn't do this before I put ranjus rom on it either)
O2 Extended Rom Customisations Are Probably Not Compatible With WM6.1
You Need To Flash The Extended Rom To Remove All The O2 Customisations.
Go Into Your Phone Options And Set The Band To Auto To Enable 3G/GPRS And Not Just GPRS. (GSM = GPRS & UMTS = 3G)
Download The HTC Network Settings Tool And It Will Configure Your Device With The Settings Required For Your Selected Network.
Hope That Solves Your Problems.
Regards,
OllieD
I tried to change the band from gsm to auto but it just goes back to gsm and greys all the boxes out! do I need to use that prog you gave the link to?
edit:think I got it to change the band to auto, still not on a 3g network but maybe I am outta range.
the device kept turning off like it was outta battery, but it said there was like 30% left, now im on mains power its workin ine.
can I flash th extended rom witout looisng all the settings and progs I've just loaded on?
I Believe So...
I Think You Can Just Make Sure Theirs No "radio_.nbf" (Radio Rom) Or "nk.nbf" (CE OS Rom) In The Flash Utility Folder.
Then Run The Flash Utility And Dont Perform A Hard Reset After Flashing.
It Should Then Only Update The Extended Rom. The Problem Is If You Have Already Let The Device Autoconfigure,
Alot Of The Crap From The Manufacturers Standard Rom Will Still Be Installed On Your Device.
The Best Way To Remove Would Be A Hard Reset But That Means Having To Reconfigure And Reinstall Etc.
Oh And To Answer Your Previous Question About The O2 Logo, Ranju's Rom Doesnt Flash That Area Of The Device Thus Leaving The O2 Logo Intact.
Their Are Ways To Customise This Logo If You Like.
Regards,
OllieD
I will have a tinker later on when im at home in front of my computer. Any idea why I can't get 3G reception? its enabled in the control panel.
So does anyone have any idea why I cant get 3G network reception? Im on radio 1.15 now.
For those of you who can get 3G reception...When you go to Settings>Phone>Network>(Network Selection) Manual...Does it show the regular networks (i.e 'Orange', 'O2 - UK' etc) AND the 3G network (i.e 'Orange 3G', 'O2 - UK 3G' etc)?
Sim Card Possibly.
No The Networks Are All Called The Same Its Just The Radio Bands Used To Connect Data Services That Differ.
Maybe Your SimCard Isnt A 3G Sim Or It Isnt 3G Enabled?
If The Sim Is Not A 3G Sim It Would Only Use GSM I Believe.
Regards,
OllieD
it is definstely a 3g card as it works in my other phone! does everyone get 3g reception on orange using a g3 o2xda with ranju rom and radio 1.15?
Isn't there ANYONE on orange in here??? I have had a look around and I think most of the Orange network runs on a 900MHz UMTS freqency. And it looks like the Uni only supports 1900MHz
UMTS on Ranju 7.7
I am on Orange, using Ranju 7.7 and radio 1.18. I had the same problem as you with the default Phone parameters, but I was able to change the band setting to "Auto" in the phone options. Thus GSM Band became "EGSM+DCS1800" and UMTS Band "UMTS 2100". And after a while the 3G icon appeared !
Universal bad for 3G
i can only say that universal has very bad 3g(UMTS connection) because when most other phones show 4 bars for 3g..my o2 exec only give 1 bar..but it is OK for 2g or GPRS...anyone agree??
Well I just flashed my voda v1640 with ranju v77 Rom, and shows good UMTS performance with italian "TIM" network, both for signal strength and for internet browsing.
the Radio is 1.14.10 (it should be the original one...)
Related
I've got a little problem whith 3G & HSDPA.
The problem is it won't connect whith 3G speed, just whith GPRS.
HSDPA is enabled, and I didn't edit any registry settings that would affect the connections, and there is 3G area coverage (checked whith other phone).
Oh, and the icon stays on 'G' all the time, no '3G' or 'H'...
Any ideas?
some operators have special 3g and up usims
and only connect to 3g and up with them could that
be the issue or have you tried the sim on those other phones?
htc have at times been criticised for having worse reception then nokia and other phones but never anything but G seems odd
I'm sure you've tried this already, but try another SIM in the TC, and try your SIM in another phone. Just in case it's a SIM problem. I'm assuming you have a 3G SIM card?
I have an USIM, and 3G was working great whith my previous Hermes...
Update: After a Hard Reset HSDPA came back alive and kicking... after the backup has been restored whithout the registry everything seems to be fine...
I'll start editing again... and post the cause if found
Hi,
I have a problem with my cruise, the phone went already 2 times to the operator for repair but the problem is still here, they juste made an Hard reset
When it sent it to SFR first time, it was very long to find the Network and trying a Wap session crashed the phone, connection failed and Calling was impossible,
So after the second time I decided to repair it myself...
I've made a HARDSPL to CIDUnlock on the phone, so now I Have WM 6.1 Rév : 1.28.405.1FRE
Then I UnSIMLocked with the tools from Olipro, that worked so I can now Use a Orange SIM in my SFR Cruise,
But the GSM module was still not Working correctly, so I flashed the Radio for version 1.58.25.14.
Now the network is found very quickly, as quick as when I had no problem with the phone, But one problem persists, I can use the GPRS but no 3G or HSDPA, this crashes complety like before, so at the moment I forbid connection to 3G with Manual Band selection in the phone parameters, so the phone doesn't look for any 3G / HSDPA Network.
How can I solve this, any solutions ?
Hi to All !
I tried a lot of Roms but up till now couldn´t find one
with 3G working ...
So I went back to my T-Mobile WM5 Rom.
Do you know one Mobile 6 Rom with working UMTS ?
Pease advise.
Best regards,
Karl
Pretty much every WM 6/6.1 ROM out there works with 3G/UMTS, perhaps you don't know how to activate it?
unless you are in the U.S. then you won't have any 3G , only GPRS, no matter what ROM you might have.
Sharpe1965 said:
I tried a lot of Roms but up till now couldn´t find one with 3G working ...
Click to expand...
Click to collapse
every WM 6/6.1 or 6.5 rom work with 3g if you have proper setting for it... if you are talking about 3G feature like videocall then none of therom except wm 5 works... if you are talking about 3G internet or other service then it should work flawlessly... try to install the setting cab for the operator and your country... the best way to get it would be getting it from t-mobile rom you got... there should be a cab file namely your operator in ext driver of the rom...
Hi !
Mysterious ....
My provider is Orange. So I took the T-Mobile Rom and changed the provider to Orange using the Network Wizard. 3G is working fine on this. I will simply stay with the WM5 Rom ... By the way ... We do have 3G here in Europe.
Best regards Karl
Go with any wm6, 6.1 or soon to be 6.5 rom and use the network wiz. I have been using it for years with no problems at all. Could it be a hardware problem??
gingerchristopher
gingerchristopher said:
Go with any wm6, 6.1 or soon to be 6.5 rom and use the network wiz. I have been using it for years with no problems at all. Could it be a hardware problem??
gingerchristopher
Click to expand...
Click to collapse
dont forget to put your phone on auto on phone settings
Some Tomal's ROMs doesn't work with 3G e.g. Tomal v.8.7 lacks this. The option was locked and my Qtek could receive only GSM1800.
Well I too live in Europe but I had such a problem if I used my old sim card I couldn't use 3g but with a new sim card I could. Soo try with another sim card maybe that will help. I use vodafone
bardaldeia said:
dont forget to put your phone on auto on phone settings
Click to expand...
Click to collapse
Thanks !
I am an idiot !
Everything is working fine now.
Best regards,
Karl
ASSHORN said:
Some Tomal's ROMs doesn't work with 3G e.g. Tomal v.8.7 lacks this. The option was locked and my Qtek could receive only GSM1800.
Click to expand...
Click to collapse
Wrong. All Tomal's ROMs support 3G, the option was not locked, but unavailable once you have a GPRS connection established. Disconnect and you will be able to switch to auto in settings. However, in some ROMs complete settings were available through phone options.
enigma1nz
OK, maybe my full-loaded with apps Qtek wasn't able to switch in auto mode due to some reasons. But still, thank you for information!
PS: I do appreciate Tomal's ROMs cooking and consider them a very good for Unis.
ASSHORN said:
enigma1nz
OK, maybe my full-loaded with apps Qtek wasn't able to switch in auto mode due to some reasons. But still, thank you for information!
PS: I do appreciate Tomal's ROMs cooking and consider them a very good for Unis.
Click to expand...
Click to collapse
It usually doesn't switch the Auto mode automatically, I always had to adjust it in settings, but the only reason the selection tab is greyed out when you go to do so it the active connection already established. Don't think it has anything to do with apps loaded. Try it next time, Tomal's ROMs are great. Would hate something as small as that ruin that impression for you
3G Icon disappeared
Hello guys,
Yes Enigma1nz
You are right. All Tomal's ROMs are great. I use Tomal's Rom always.
But here I can't see 3G icon on top bar. I have saved the proper configuration file for 3G settings from operator.
Here is my network & band settings:
Select your network type = Auto
GSM Band = Egsm+DCS1800
UMTS Band = UMTS 2100
Can you tell me how you are using 3G fine?
WCDMA
Legendpda said:
Hello guys,
Yes Enigma1nz
You are right. All Tomal's ROMs are great. I use Tomal's Rom always.
But here I can't see 3G icon on top bar. I have saved the proper configuration file for 3G settings from operator.
Here is my network & band settings:
Select your network type = Auto
GSM Band = Egsm+DCS1800
UMTS Band = UMTS 2100
Can you tell me how you are using 3G fine?
Click to expand...
Click to collapse
Enigma1nz
You were right. It was all about setting.
I have done it myselft by selecting network type to WCDMA. It was on Auto mode.
Now my UNI is showing 3G on tob bar.
Hi
I'm running android on my Kaiser, from Nand and I'm on 3-UK
The problem I'm having is that the 3g signal where I live is really bad - so bad I have to disable it in windows mobile or all I get is constant flicking between 2g GPRS and 3g
I have tried the setting on the android through the settings - wireless - mobile networks but the 2g only won't stay checked.
I have tried the *#*#INFO#*#* menu setting and it always reverts back to WCDMA preferred.
Both of these can only be changed when the phone finally locks on to a signal.
Now 2g will always show as roaming, I think because 3-uk's 2g is on Orange, in windows it still shows as 3 but on android I get the following:
2G: Orange PCS Ltd
3G: [email protected]
My phone is originally an orange kaiser but has been unlocked and hard spl'd
Really frustratingly if I run Android via Haret from Windows mobile (where I've forced it 2G) it runs fine.
Can anyone here on 3g help ?
Anyone help ?
Hi
I just bought a second hand unlocked HD2
I am on Orange. The phone will pick up 3G but I need to sync with Exchange. At work we have our own APN options. So , I have go into the connection tab but from some reason , there is no Cellular 3G,GPRS option, only GPRS. The phone does sync, but I don't think I am getting a 3G connection
With my previous phone Diamond 2, when I did the same thing, the 3G was an option
Am I missing something?
Which version of HD2 did you buy? Did you even check if your HD2 3g bandwidth is compatible with orange?
Not sure I understand your question , but I believe I have a
HD2 T8585
Did you even check if your HD2 3g bandwidth is compatible with orange?
Others at work, have a HD2, so it will work on 3G. I was unaware that there was different types of HD2!!
as long as your basically anywhere but america the 8585 should work (dont quote me on this, obviously there are others) ie uk, europe, south africa should work. I believe australia has their own band specific version as well...
id suggest you go to the rom site, install an original rom, and see if it works afer you run an auto configure in the network settings.
Alternatively, try flashing a new radio rom and see if it works. the 2.07.50 works well for me in SA. some others also only give me EDGE.
I don't know how you have it in your country, but here in Denmark the providers have downloadable 3G settings to their networks that we have to pull down to get it to work...
Unless of course we set it up manually.
Maybe you haven't gotten the setup from Orange?
Hey there, you should check your band settings:
Go to settings > connections > network advanced > in the first tab you can choose "off" or "only HSDPA" or "HSDPA/HSUPA". click on the last option for 3G band.
My former devices (X1i and Hermes) you had band-settings for GSM or 3G but on the HD2 i cannot find it, so this option is changed in WM6.5 i guess.