I have the QPST QCNviewer, which allows me to save qcn files to txt, where i can edit the data, but am unable to write to qcn, or simply edit it within a program. A BRT editor may be of similar use.
Thanks in advance.
MJK
Holy bumps. But maybe http://mh-nexus.de/en/hxd/
n1nj4Lo said:
Holy bumps. But maybe http://mh-nexus.de/en/hxd/
Click to expand...
Click to collapse
D you have .qcn file for my mega i527m ?
i need qcn for F320s...anyone has it..?
Related
*********
*********
What is the best way and tools to use to edit initflashfiles.dat
This file is very important and we need step by step clear guide with example
Attached one sample edited by TofClock ... let use this as an example
*********
*********
Just change the extention of it to .txt
edit it and after finish editing
change the extension back to dat
Is this answe ur question?
Thanks for quick response. I appreciate it.
Are you sure i do not have to convert from unicode to text and then edit and then back to unicode??
Is it normal text file ... it does not look to me that way!
Did you check the attached file?
I did this several times
Attached your file in .txt after rename it and it will tel u that the file may be damaged, do not care
You must rename the file again to be .dat after making ur changes
But be curfull any mistake in this file will create a big problem do it but be curful
llbasha said:
*********
*********
What is the best way and tools to use to edit initflashfiles.dat
This file is very important and we need step by step clear guide with example
Attached one sample edited by TofClock ... let use this as an example
*********
*********
Click to expand...
Click to collapse
You can right click on the file - open with - and it should open with notepad. Yes you need to save it as unicode but even then you will find it will not work. You need to use a hexeditor and delete the first ff and fe as these are added when saving with notepad.
Would u please explain more, how to find this FF & FE?
I know how to nba files only
Thanks
The_hesham said:
Would u please explain more, how to find this FF & FE?
I know how to nba files only
Thanks
Click to expand...
Click to collapse
When you open the file with a hex editor the first 2 values seen are FF and FE just delete these and save.
Thanks man
this is quite helpfull
but .. r u sure if i edit the file with notpad it will fail to run
i think one of my friends edited it with notpad and all gone well
thx for the nice wotk guys .. this is very appritiated
Sincerly
Adam
solomhamada said:
this is quite helpfull
but .. r u sure if i edit the file with notpad it will fail to run
i think one of my friends edited it with notpad and all gone well
thx for the nice wotk guys .. this is very appritiated
Sincerly
Adam
Click to expand...
Click to collapse
I tried it without removing those 2 values and it always hangs the device. If in doubt check the file (before and after editing with notepad) with a hex editor and you will see ff and fe are added.
meschle said:
I tried it without removing those 2 values and it always hangs the device. If in doubt check the file (before and after editing with notepad) with a hex editor and you will see ff and fe are added.
Click to expand...
Click to collapse
i dunno
i'll ask him
cheers!
ADAM
I'm sure I did change the file without doing the removing of FF & FE and it works normaly
But no prob., next time I will try meschle advise
I discovered that the best way to edit any unicode file is by using an old program called editpad (free version copy attached here: ( http://forum.xda-developers.com/showthread.php?p=1130485#post1130485 ) that allows to do, among many other things, to convert unicode to ansi and back to unicode without destroying the file structure. I feel sure many will find this very useful. Also it can be used as direct replacement for notepad by just rename it notepad.exe and over write your window one (or rename it before copying).
initflashfiles Editor
Hi every body been working on a rom kitchen when i got to the initflashfiles File Editing I put this Tool Together thought i'd share it so here it is
Thanks to every body how share's there work and tools on this site I would like to here what you think of this tool please as your comments will help to improve the tool this is virsion 0.1.0, I think it's completed but let me know your thourght's
Swampy395
The_hesham said:
I did this several times
Attached your file in .txt after rename it and it will tel u that the file may be damaged, do not care
You must rename the file again to be .dat after making ur changes
But be curfull any mistake in this file will create a big problem do it but be curful
Click to expand...
Click to collapse
OK, when I cut the new initflashfile und paste it in the windows folder what will happen with the existing initflashfile.dat? Will the newer one replace the older one or will be two files in the folder after doing this? Thanks for help.
I have a Acer Tempo DX900 if it is neccesary to know that.
Hi guyz,
please help.i read the voip solved thread.but still have a problem.i create the _setup.xml file but it is a txt file so i dont know how to convert to a real xml file and make te cab file at last move to my htc s710.i wish someone could take a capture of this hole work and posted to this forum,could be more easy for everyone have problem to install voip..(sory for my bad english)thanks..
i dont know about the rst but to convert the text file to xml u can just rename the file to ***.xml
bestmodel03 said:
Hi guyz,
please help.i read the voip solved thread.but still have a problem.i create the _setup.xml file but it is a txt file so i dont know how to convert to a real xml file and make te cab file at last move to my htc s710.i wish someone could take a capture of this hole work and posted to this forum,could be more easy for everyone have problem to install voip..(sory for my bad english)thanks..
Click to expand...
Click to collapse
i rename it but its still txt file!
It might be xml but the default program to view it must be set to notepad,if it is not so,use resco explorer for smartphone and rename it,i do that and it works for sure
bestmodel03 said:
i rename it but its still txt file!
Click to expand...
Click to collapse
- Open the file with notepad.
- Click save as
- Click Save as Type and Select All Types/Files (The Default is .txt)
- Name it _setup.xml
- Click save
i finally converted,but i cant make voip call..i have to edit my ipdialplan.xml..how can i do this?what is need to be change?i live in danmark and use voipraider..need help please..
yea so I'm wondering how do you edit a android xml file exactly ?
An xml file is just text and some formatting. You can edit xml files with any text editor, even notepad.
For this kind of thing, I recommend PsPad...it's free and is able to handle the formatting/tabbing of all sorts of files.
now i'm getting there lol but when i open it up its all hex
i would like to learn this as well..thanks
furrelkt said:
i would like to learn this as well..thanks
Click to expand...
Click to collapse
Have you tried PsPad ?
i need help
the_scotsman said:
An xml file is just text and some formatting. You can edit xml files with any text editor, even notepad.
For this kind of thing, I recommend PsPad...it's free and is able to handle the formatting/tabbing of all sorts of files.
Click to expand...
Click to collapse
I have opened some xml, plist etc files before. I came across one recently that will not open no matter the editor. It says error blah blah blah.
i guess it's the encoding thing. please can you help?
I have also attached the file i want to open and the image of the error message received so you can be informed of exactly what I am saying.
Hello,
I look for a file named custom.bin; who can send me one? (located to the DATA root in ROOT mode)
Many greetings
pascalbriand said:
Hello,
I look for a file named custom.bin; who can send me one? (located to the DATA root in ROOT mode)
Many greetings
Click to expand...
Click to collapse
it's nothing fantastic...... or is it....... it's got info about your phone and how the cust partition will be utilized. on mine it says vha/au
on others i'm not too sure.... maybe we can get people to post here and make a quick database of the custom.bin files...
lynxdog said:
it's nothing fantastic...... or is it....... it's got info about your phone and how the cust partition will be utilized. on mine it says vha/au
on others i'm not too sure.... maybe we can get people to post here and make a quick database of the custom.bin files...
Click to expand...
Click to collapse
Hello,
I have search for the CUSTOM.BIN file on my phone, and i could not find it.
Can you say me in which folder should i put this file ?
Can you share your CUSTOM.BIN file ?
Regards
pascalbriand said:
Hello,
I have search for the CUSTOM.BIN file on my phone, and i could not find it.
Can you say me in which folder should i put this file ?
Can you share your CUSTOM.BIN file ?
Regards
Click to expand...
Click to collapse
Of course, here is a copy of mine. open it with a TXT editor or HEX editor and you'll see whats inside.
It's located in /DATA/
You'll need RootExplorer or something similar.
Just unzip it first.
View attachment custom.zip
Hey guys,
Does anybody have a qcn back-up file for the MI 4 LTE-CU?
I need it very bad. I flashed wrong modem firmware and now my nvram (12, 13, 16th partition) is corrupted . I have no IMEI, baseband and cellular info.
Hope someone can help me.
Ruud
Try Qualcomm IMEI Writer or QPST tools.
I tried them both but I need a qcn file complete. I do not know how to write a complete qcn file myself.
If I can get a similar qcn file from the same device I can change the IMEI into my own using QPST and a heximal IMEI converter.
rudge79 said:
I tried them both but I need a qcn file complete. I do not know how to write a complete qcn file myself.
If I can get a similar qcn file from the same device I can change the IMEI into my own using QPST and a heximal IMEI converter.
Click to expand...
Click to collapse
dropbox.com/s/nhf0he391kmtrou/mi4.QCN?dl=0[/url]
yingice said:
dropbox.com/s/nhf0he391kmtrou/mi4.QCN?dl=0[/url]
Click to expand...
Click to collapse
Is it the LTE FDD version of MI4? I tried to flash it using QPST but no success so far.
It can not reset NVram it says. Complaining about incompatible model number.
Thanks for your help! I going to examine the file later this week and then give it another try. Probably coming weekend.
Greetings
It works!! Finally I got it. I used XVI32 writer to change the IMEI in the above qcn file. With Qfil I was able to restore the adopted qcn file.
Many thanks for sharing, Yingice!!
Solved!