Related
May 24th, 2008
FrankenKaiser SPL Loader
This is a fast application image downloader which can download e.g. spl or android to the phone when the phone is in dload mode. This can for example be useful for developers to test a SPL from another device w/o the need to flash them
======================================================
DISCLAIMER: This method involves erasing SPL & OS and requires correct data entry by the user. I will not take any responsibility for any malfunctions and or damages caused by using this method and software.
======================================================
Prerequisites:
- a *security unlocked* HTC MSM7x00 device
- QC diag drivers installed (e.g. MotoQ)
This was tested with a Kaiser, Niki and Wings
Steps are:
1 power down
2 hold green send key and power on, the phone will enter radio bootloader (oemsbl)
3 connect with MTTY (COMn) and type "dload" to put phone in dload mode
4 close MTTY, reconnect USB, run my new downloader in a CMD box, e.g. "./FrankenKaiser-SPL-Loader.exe /dev/com4 SPL1.56-KAIS-unbricker.nb (substitute com4 by the com port of your qc diag driver)
5 hold send key and press soft reset with stylus (on phones like Nike this is not possible, in that case you must add "setboot 1" to step 3 before typing "dload" and in step 7 add "setboot 0" before typing "dload")
6 connect with MTTY (COMn) and type "mw 901708 1 e1a00000"
7 type "cego" (press and hold camera to enter tricolor bootloader mode)
Have fun!
may i be one of the first to say Thank you.
jumpspl, supercid and security unlocker, frankenkaiser .. man you are owesome.
A truly gifted individual and thank you for all your hardwork.
Thanks, Jockyw2000, your work really rocks, but...
OEMSPL did not work for me (HTC Wings)
Ive hold down the green button and tapped the PowerButton=>Boots normal.
Offtopic;
My Question is; Is it possible to "Switch" the GPIO 0x5c (Kaiser SimDoor) from 0 to 1 manually?
Because i want to "port" a KaiserRom over to my Wings, but ive getting trouble with this annoying "Sim Door Open, please close it.Phone shuts down in 10 seconds..." warning.
arpy said:
Thanks, Jockyw2000, your work really rocks, but...
OEMSPL did not work for me (HTC Wings)
Ive hold down the green button and tapped the PowerButton=>Boots normal.
Click to expand...
Click to collapse
Your Wings is not security unlocked, so you can't enter oemsbl that way.
Offtopic;
My Question is; Is it possible to "Switch" the GPIO 0x5c (Kaiser SimDoor) from 0 to 1 manually?
Because i want to "port" a KaiserRom over to my Wings, but ive getting trouble with this annoying "Sim Door Open, please close it.Phone shuts down in 10 seconds..." warning.
Click to expand...
Click to collapse
Afaik that's possible.
Security Unlocked?!?
Ähh...ok...isnt enought to flash your HardSPL?
...but youll give me some hope...now i digg deeper into this phantastic Forum...
Just a quick question Jocky....
How does this differ from using MTTY to upload SPL to our Kaiser?
kyphur said:
How does this differ from using MTTY to upload SPL to our Kaiser?
Click to expand...
Click to collapse
How do you use MTTY to upload a SPL then ?
jockyw2001 said:
How do you use MTTY to upload a SPL then ?
Click to expand...
Click to collapse
I'm asking with all due respect. I haven't done it. To be honest I haven't flashed anything with MTTY since I had my Hermes last year but I was under the impression that we could.
If we can't then you have answered my question as the difference is exactly that!
In the quest for knowledge we all sometimes ask apparently dumb questions...
So with this thing I can make my deviece look as a MSM7500. To boot up HaReT all the time???
kyphur said:
I'm asking with all due respect. I haven't done it. To be honest I haven't flashed anything with MTTY since I had my Hermes last year but I was under the impression that we could.
If we can't then you have answered my question as the difference is exactly that!
In the quest for knowledge we all sometimes ask apparently dumb questions...
Click to expand...
Click to collapse
obviously you can, the RUU uses mtty commands to download the images.
When I run FrankenKaiser-SPL-Loader.exe , WindowsXP closed DOS window with error.
What is wrong ?
WBR !
Sorry, duble.
"mw 901708 1 e1a00000"
what's at address 901708 and why change it to E1 A0?
ma kaiser dead or not please help will donate with paypal 50pounds if you can help
wait ....to resolve this .
gsmhackerns said:
I use hard spl and install radio to unlock my htc tytn bat after this i flash with this rom :RUU_Kaiser_HTC_WWE_1.25.405.0_22.39.82.00.b_1.27.04.15_Test
My phone complete all proces 100% bat after this can not boot or charge no ligh no bootloader as i can see now it have only radio bootloader (oemsbl) and i found and install driver and see in device menager com ports quacom diagnostic interface 6000 and qualcom nmea device...Can you help me to unbrick my kaiser with frankenkaiser spl loader i will donate with paypal you please...pm fuull instuction or can you create for me exe file with all .thanks.wait you.
Click to expand...
Click to collapse
Did you security unlock your device before this happened?
Ta
Dave
DaveShaw said:
Did you security unlock your device before this happened?
Ta
Dave
Click to expand...
Click to collapse
i install hard spl unlock device bat after flash complete 100% my phone always go in oemspl can not go in normal bootloader or power on.
Since it doesnt seem as though you unlocked the phone, just download an oem rom/radio combo for the phone from the operator it belongs on ( IE , if it is an ATT TILT, download from HTC the latest rom off their website JUST for the att tilt )
This should fix you up
DaveShaw said:
Did you security unlock your device before this happened?
Ta
Dave
Click to expand...
Click to collapse
Dave i have same prob...device allready unlocked before flash... no power on, no bootloader mode... on pc recognized like diagnostic.... what can i do?
Frankenkaiser error
I managed to brick my device real good. When I start the device, holding down green send, and run mtty to run the dload command, I get Invalid command : dload. Im in deeper than I bargained for. Whats next?
the0ne.john said:
I managed to brick my device real good. When I start the device, holding down green send, and run mtty to run the dload command, I get Invalid command : dload. Im in deeper than I bargained for. Whats next?
Click to expand...
Click to collapse
What did you do? task 2a?
Are you security unlocked? What SPL do you have?
Thanks
Dave
Hi all,
How to flash the rom for a Wizard G4 without activesync (only with the bootloader mode)??
I had and error with my previous update and i need to re-install it in bootloader mode...
Thanks in advance,
TD.
Simply,get the phone in Bootloaders by pressing Camera + soft reset,it'll go into Bootloaders (RGB) and hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloader Screen,if its there just run the RUU in the rom,it'll start to flash.
zabardast_1 said:
Simply,get the phone in Bootloaders by pressing Camera + soft reset,it'll go into Bootloaders (RGB) and hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloader Screen,if its there just run the RUU in the rom,it'll start to flash.
Click to expand...
Click to collapse
No, Its comm manager + camara + softreset...........
Don't work
Yes, my Wizard is in bootloader mode (the usb indicator is here), but when I run the RUU, no device is detected (it's normal because RUU needs activesync connection) !!! Same effect with the official ROM !!
Please help...
for your information, when my it re-boot it is blocked on:
IPL 2.17.0001
SPL 2.17.0001
GSM 02.07.10
OS 6.1.0.0
Thx,
TD.
erm i always press the camera button and softreset and it gives me a RGB
zabardast_1 said:
Simply,get the phone in Bootloaders by pressing Camera + soft reset,it'll go into Bootloaders (RGB) and hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloader Screen,if its there just run the RUU in the rom,it'll start to flash.
Click to expand...
Click to collapse
yes it works !
Perhaps...
Perhaps you can try the sd card method, but one of the guru's here would have to confirm that. When my usb was busted, that method was suggested to me (click the link in my siggy). I don't have a G4, so I am not sure if the sd method would even work, but it is worth a read, and like I said, perhaps one of the guru's could confirm or deny this method.
SD Card
How to flash with SD? Do you have a link to do this?
Thx,
TD.
hello everyone!
Untill a few minutes ago I had a similar struggle; my Activesync connection was down exactly when I wanted to flash my device; I read all what was readable and after trying to flash tie new rom from the card, i just realised that if i press the usb cable firmly into a direction, the device suddently got recognised. SO, i guess that too much use of the usb port gets electrical contacts to get loose.
Hi ! I have a problem with my Kaiser ! The screen is black, the device doesn't turn on ! But when i hold the power key & soft reset hole at the same time,
green light comes on, but the screen stays black ! Is there a way to make my kaiser working ? (Sorry for my english)
Remove battery and then press power button 30 seconds or more.
Worked for me.
Assface said:
Remove battery and then press power button 30 seconds or more.
Worked for me.
Click to expand...
Click to collapse
it doesnt work ! I think there is a problem with spl , because this problem appears after unsuccessful hard spl installing ! I don know how to fix this
IP13 said:
Hi ! I have a problem with my Kaiser ! The screen is blank, the device doesn't turn on ! But when i hold the power key & soft reset hole at the same time,
green light comes on, but the screen stays blank ! Is there a way to make my kaiser working ? (Sorry for my english)
Click to expand...
Click to collapse
Not trying to oversimplify things, but is the device fully charged? Did you have any problems during the flash? Which SPL did you flash? Have you tried a hard reset? Can you get to the bootloader screen to verify the version of SPL installed vs. the version you tried to install?
Just a few questions to help us try to figure out what is going on. Take care!
krouth said:
Not trying to oversimplify things, but is the device fully charged? Did you have any problems during the flash? Which SPL did you flash? Have you tried a hard reset? Can you get to the bootloader screen to verify the version of SPL installed vs. the version you tried to install?
Just a few questions to help us try to figure out what is going on. Take care!
Click to expand...
Click to collapse
The device is fully charged ! The problem was when I tried to install hard spl ...the screen stuck and I made a reset ,after this the phone ca not be turned on and all I see is green light.
I can not get to bootloader screen , when i try to turn on the device the screen i black (blank) but the green light is on
IP13 said:
The device is fully charged ! The problem was when I tried to install hard spl ...the screen stuck and I made a reset ,after this the phone ca not be turned on and all I see is green light.
I can not get to bootloader screen , when i try to turn on the device the screen i black (blank) but the green light is on
Click to expand...
Click to collapse
How are you trying to get to the bootloader screen? Have you fully read through this thread:
http://forum.xda-developers.com/showthread.php?t=533976
Finally, I would recommend downloading the original ROM and installing it. The ROM for the Tilt is here:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
That is straight from HTC's website, and you might look to see if your specific phone is there. You should be able to download it, connect your phone with the USB cable and run the downloaded file from your computer to bring your phone back to it's original state.
If that works, I would then re-read the link above thoroughly and give it another shot. Hope this helps!
krouth said:
How are you trying to get to the bootloader screen? Have you fully read through this thread:
http://forum.xda-developers.com/showthread.php?t=533976
Finally, I would recommend downloading the original ROM and installing it. The ROM for the Tilt is here:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
That is straight from HTC's website, and you might look to see if your specific phone is there. You should be able to download it, connect your phone with the USB cable and run the downloaded file from your computer to bring your phone back to it's original state.
If that works, I would then re-read the link above thoroughly and give it another shot. Hope this helps!
Click to expand...
Click to collapse
Active sync doesnt recognize my Kaiser!
IP13 said:
Active sync doesnt recognize my Kaiser!
Click to expand...
Click to collapse
When you try to run the original HTC ROM installation program (from my previous post) with your phone connected - does it recognize your Kaiser?
krouth said:
When you try to run the original HTC ROM installation program (from my previous post) with your phone connected - does it recognize your Kaiser?
Click to expand...
Click to collapse
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
IP13 said:
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
Click to expand...
Click to collapse
I am not asking what Windows thinks you have connected, or whether or not ActiveSync sees the device. What I am asking is: When you run the original HTC ROM installation program:
"RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe"
downloaded from HTC's website, is that program able to see your phone and go through the installation process?
IP13 said:
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
Click to expand...
Click to collapse
Uninstall Ur Active synce And Install Again .
Then Put Ur Phone In Bootloader Mode I Hope Work Fine
CHK And Post Result
krouth said:
I am not asking what Windows thinks you have connected, or whether or not ActiveSync sees the device. What I am asking is: When you run the original HTC ROM installation program:
"RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe"
downloaded from HTC's website, is that program able to see your phone and go through the installation process?
Click to expand...
Click to collapse
I cant install this rom because it shows me an error : "ERROR [260] CONNECTION
The Update Utillity cannot connect your PDA Phone . Please check that your USB cradle/cable is connected properly between the PC and your PDA phone .
Chech the following :
1.The PDA Phone is connected to the USB cradle/cable.
2.The USB cradle/cable is connected to the PC "
I have allready checked the cable (it works with my other PDA)
delower10 said:
Uninstall Ur Active synce And Install Again .
Then Put Ur Phone In Bootloader Mode I Hope Work Fine
CHK And Post Result
Click to expand...
Click to collapse
I cannot acces bootloader mode , when I am pressing keys to acces bootloader mode the phone screen is still black /blank .
IP13 said:
I cannot acces bootloader mode , when I am pressing keys to acces bootloader mode the phone screen is still black /blank .
Click to expand...
Click to collapse
To access bootloader, you should hold down the camera button (on right side of phone) and the use the stylus to press the reset button (on bottom of phone.) When the phone goes blank, release the camera button.
When you do this, do you still get the blank/black screen?
Also, did you follow EACH step in the following thread:
http://forum.xda-developers.com/showthread.php?t=433835
krouth said:
To access bootloader, you should hold down the camera button (on right side of phone) and the use the stylus to press the reset button (on bottom of phone.) When the phone goes blank, release the camera button.
When you do this, do you still get the blank/black screen?
Also, did you follow EACH step in the following thread:
http://forum.xda-developers.com/showthread.php?t=433835
Click to expand...
Click to collapse
Yes ! I also get the blank screen after following all this steps !
IP13 said:
Yes ! I also get the blank screen after following all this steps !
Click to expand...
Click to collapse
I am not sure.... I have done some searching and ran across this thread:
http://forum.xda-developers.com/showthread.php?t=423486
It has numerous posts about problems people have experienced flashing - maybe you might get some insight there - or at least post your question there where more people might be monitoring the thread. Good luck!
Please take your issue to the right place, better than open a new thread, I sugest
http://forum.xda-developers.com/showthread.php?t=433835
Your situation should be taken by the right guys, not just gessing if this or that might solve the situation, male a post there
Also have a look at the sticky on the top, try to get Dave Shaw help
THx I will try to ask there ....
Fanning the flames.
Okay if you can't access the boot loader then you need to go higher up. I think the chain is Radio Rom, then SPL, then OS. Basically your SPL is gone, that is why your screen is black and you can't get into the boot loader --- cause its gone. So no duh, it can't load the OS. So, your only hope is that your radio rom is working so you can access the phone via cmd interface programmed within it.I really don't know what i'm talking about, but I've bricked my phone too and with some guidance (er explicit instructions in chat) I was (er she was) able to fix it [my situation was far more complicated with a "security locked" device, and a "radio from hell"]. Your key words are frankenkaiser. which you can find here:
http://forum.xda-developers.com/showthread.php?t=394584
Good luck, if you can get into the oemsbl I'm sure your in business. If your feeling nervous bust out the paypal and head to irc.freenode.org #xda-devs {albeit someone will likely help you without the donation but for real your going to hold someone up for an hour or two you should throw them atleast 20$ to save u 200$ }
tyler51773 said:
Okay if you can't access the boot loader then you need to go higher up. I think the chain is Radio Rom, then SPL, then OS. Basically your SPL is gone, that is why your screen is black and you can't get into the boot loader --- cause its gone. So no duh, it can't load the OS. So, your only hope is that your radio rom is working so you can access the phone via cmd interface programmed within it.I really don't know what i'm talking about, but I've bricked my phone too and with some guidance (er explicit instructions in chat) I was (er she was) able to fix it [my situation was far more complicated with a "security locked" device, and a "radio from hell"]. Your key words are frankenkaiser. which you can find here:
http://forum.xda-developers.com/showthread.php?t=394584
Good luck, if you can get into the oemsbl I'm sure your in business. If your feeling nervous bust out the paypal and head to irc.freenode.org #xda-devs {albeit someone will likely help you without the donation but for real your going to hold someone up for an hour or two you should throw them atleast 20$ to save u 200$ }
Click to expand...
Click to collapse
Thx man , appreciate this !!
hi , i cant connect my vox to pc ...
when i run bootloader i can see bootloader USB .. but pc not search .
How i can remove cid ;/
When i put on vox i see windows mobile ... and orange picture... and END .. please help me ;(
Why not tell a little about the history of this device and your motivation to change the CID?
- has it ever worked (Windows mobile coming up)?
- has it ever connected to a PC while operating (Active Sync or Device Center)?
- do you know what the CID is good for?
- what makes you want to change the CID?
really sory for my english ... ;(
active sync dont search phone dont connect.
when i put on phone i see windows mobile loading next i see orange picture and the end STOP ... when i flash phone sd card i change name file next i put on bootloader and error: invalid certificate and phone off.
Well - it seems like the device does not boot correctly any longer.
First try to re-initialize the device:
- press both soft-keys and keep them pushed
- push the power on button (keep the two hotkeys pressed still) until the green light comes on, release power button
- still keep your fingers on the two softkeys until you see a prompt on the screen
- push the "send button" (Green Call button) to reset the device
If this does not help, you will need to re-flash the original ROM first to make sure that the device has no HW problem. Flashing is possible in basically two ways:
- via a connection to the PC (ActiveSync is NOT required)
- via SD card (special card setup required, aka "Gold Card")
I recommend the 1.st option. What you need is a PC, the orginal ROM from the vendor (I suspect Orange for device) and the Updateprogram for this ROM. SW + Updateprogram is usually one package.
Once you have all this:
1. Enter Bootloader on the device:
-- switch off
-- push camera key and keep pushed
-- insert USB connected to PC
-- wait for the 3-color screen to appear
2. start the update program on PC and follow instructions
I never did the last method - so try the other two first.
swiniaa said:
hi , i cant connect my vox to pc ...
when i run bootloader i can see bootloader USB
Click to expand...
Click to collapse
screen on pspc with tricolour ?
.. but pc not search .
Click to expand...
Click to collapse
in this state pspc acts not as pocket, but as raw device
How i can remove cid ;/
(
Click to expand...
Click to collapse
by flashing spl from http://forum.xda-developers.com/showthread.php?t=330909
dammm doesnt work ...
Code:
http://images40.fotosik.pl/241/e94544a52734cb51.jpg
244 invalid model id
or
270 update error
evry time
swiniaa said:
244 invalid model id
or
270 update error
evry time
Click to expand...
Click to collapse
Rootcause of your problem is that you try to load a ROM that does not fit to your device (CID mismatch). You will only be able to load such a ROM with the USPL active. You can only get the USPL active (afaik) with
- either OS running + USPL jump
- or HardSPL (replace the old SPL with USPL on device) the USPL
Afaik, you have no option to replace the bootloader SPL with the USPL that can bypass the CID check if you do not have the OS running! Also for "HardSPL" you will have to do the first method (via OS + Jump to USPL) one time. There is no gain with HardSPL unless you want to flash a new ROM many times a day (so for ROM chefs usually).
So again: Its so easy, follow my instructions in post #4
closed and i write new topic ... phone ON ...
i am presently in africa and i bough an HTC One X 32GB (FCC ID : NM8PJ46100) which has been trapped in a boot loop after system update. it wouldn't go pass the htc one beat audio page. please i need help. i don't know how to go about it.
lp71220 said:
i am presently in africa and i bough an HTC One X 32GB (FCC ID : NM8PJ46100) which has been trapped in a boot loop after system update. it wouldn't go pass the htc one beat audio page. please i need help. i don't know how to go about it.
Click to expand...
Click to collapse
if your phone is under warrenty, please take it to the service center..
if not, search how to factory reset it and if even that doesn't work, i would suggest you to search a stock rom for your device and flash it!!
pushkardua said:
if your phone is under warrenty, please take it to the service center..
if not, search how to factory reset it and if even that doesn't work, i would suggest you to search a stock rom for your device and flash it!!
Click to expand...
Click to collapse
thanks very much. i think i can only flash at this moment. but don't know what to do now since i cannot load the stock rom on my sdcard. the phone hasn't an external sd card. please help.
lp71220 said:
thanks very much. i think i can only flash at this moment. but don't know what to do now since i cannot load the stock rom on my sdcard. the phone hasn't an external sd card. please help.
Click to expand...
Click to collapse
maybe you can flash a factory rom by usb wire
oh you definately need usb cable to flash! and a pc.. check the flashing tutorial and flash it!!
lp71220 said:
i am presently in africa and i bough an HTC One X 32GB (FCC ID : NM8PJ46100) which has been trapped in a boot loop after system update. it wouldn't go pass the htc one beat audio page. please i need help. i don't know how to go about it.
Click to expand...
Click to collapse
Can you boot to HBOOT by pressing Volume down with power button? If you can ,you can select the fastboot then plug your USB cable ,then use the adb toolbox to flash a new boot.img by the command "fastboot boot boot.img",before doing this , you must put the boot.img and fastboot.exe in the same folder .
pushkardua said:
oh you definately need usb cable to flash! and a pc.. check the flashing tutorial and flash it!!
Click to expand...
Click to collapse
please Pushkardua, i am not very verse with this, i ma a first timer. please can u direct me to where i can have links to flash using my pc ? i have usb cable for the phone. thanks in advance.
mzy1996 said:
Can you boot to HBOOT by pressing Volume down with power button? If you can ,you can select the fastboot then plug your USB cable ,then use the adb toolbox to flash a new boot.img by the command "fastboot boot boot.img",before doing this , you must put the boot.img and fastboot.exe in the same folder .
Click to expand...
Click to collapse
mzy1996 sorry to bother u, but i am a new in all this. if u can just help me put it down systematically what i have to do so my phone can work again i will be most grateful. i have already downloaded the adt-bundle-windows-x86-20140702.. hope it is the right kit. awaiting a favorable respond from you.