Hi Guys,
Right here's the thing, ive got a T-Mobile MDA Vario III (HTC Kaiser). With all of the HTC devices ive had, they've come with headphones which have a call answer/end call button.
Now, when your not in a call and press the button it opens the Voice Speed Dial applet, basically the problem is ive installed Microsoft Voice Command and now the button wont open the Voce applet or MSVC, it just brings up the phone's dial pad?
My question is, is there a registry key somewhere that will allow me to set this button to activate MSVC or anything else i so wish?
Ive searched around and can't seem to find anything that will help me with this?
Thanks in advance.
Related
I wasn't sure how to ask this so bare with me.
I have an ATT tilt with the HTC ROM on it. When I go to phone mode and am looking at my keyboard, I have the smartdialing box, the keypad and then three boxes upper-left side = LEFT ARROW (delete), VIDEO CALLING icon, and CALL LIST icon.
VIDEO calling doesn't work and I don't understand what those icons in the CALL LIST (are they received calls? Dialed calls?) are all about. I was wondering if I could switch what those three buttons do? I can't find any ability to change those in OPTIONS..
I suspect that further modification will require cabs or ROM updates?
I have imprecise fingers so the keypad is excellent- I don't want to change that at all.
Thanks guys
yeah.. me too flashed my 1 day old tilt with the htc stock rom... and the dialpad sucks..... no "CALL" button on screen....
Now have to use the keypad and fingers to dial a number and pressing the green call button to actually call... it was quite annoying at the beginning... but now I am gettin used to it.
Still if any registry editing could be done in order to remap the 3 buttons on the right hand side of the dial pad screen, it would be great....
Except for this option, the HTc stock ROM is gr8888888888 !!!!!!
anyone?
There has to be a way to play with the HTC dialpad?
Screen shots?
I like the default dialer.
http://forum.xda-developers.com/showthread.php?t=339260&highlight=dialer
ok I know this is a painfully dumb question but I've searched and can't find any solution. How do I edit my Kaiser's registry?
Thanks
Hi all,
I've been running TNT 1933 Touchflo for a few of days now, and everything works like a champ.
I do have a question though regarding bluetooth with MS Voice Command 1.6. When I click the button on my bluetooth headset, the phone screen (dialer) comes up, but that's all that happens. I read around, and saw that I may need to change some registry entries. However, my registry entries seem fine:
HKLM\Software\OEM\Voice Command\Path = \Program Files\Bluetooth Voice Command\BTVCBasic.exe
HKLM\Software\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = \Windows\btagext.dll
I ran the program in the Path of the voice command (manually, just by clicking the file), and it did exactly what I needed it to do. The only problem is, that program isn't run when I click the button on the headset. I have a G3 Wizard, IPL/SPL 2.26 with 2.19.11 radio rom (not that it matters). Any suggestions?
Much appreciated.
Up you go! (aka, *bump*)
Come on guys, some of you gurus know this.
Aww come on.
I have At&t Tilt & a Jabra 250v bluetooth headset
Everyone says if I want to Listen to my Videos or Music
I need to get a Sterobluetooth for it
But I was listen to my Videos & I dont know how but could hear its audio
on my Jabra 250v & I know its not a Stereoheadset,
But it happpend,
Ca someone Help me
I want to know how it is possible & how i could set it
cos i dont like the stero headset, & be walking with 2 headphones on each ear
I prefer not to carry around a extra stereo headphone
& use just one,my Jabra 250v
well all i can tell you is i am currently running a Wizard and a Jawbone together im running TNT1933 HTC/Professional
voice dialing thing might mean you are using the old voice dialer... did you change it so that it uses MS Voice Command if not (go into START --> SETTINGS --> Buttons) mine is setup like this
Button 1 Messaging
Button 2 Internet Explorer
Button 3 Camera
Button 4 Voice Command
Button 4 (HOLD) Record
Button 5 Comm Manager
make sure voice command is set to button 4...
the phone screen (dialer) when i read this i am thinking the old version of the phone dialer the one that came with the wizard nativly... if you mean the voice commander MIC icon then say it like that cause it makes no sense... i was able to use this after i installed Voice Commander, changed the button and Added the bluetooth device then reset the unit... after that everything worked great...
I'm also running a Wizard paired with a Jawbone and am currently flashing over to NBD 8.3. I would rather use BlackDiamond 3.1, but it seems that Voice Command doesn't like BD. I may just end up cooking my own ROM that will work with VC, I just wish BD would. It's a stable ROM (once you kick some of the bugs out), and I like the "wow" factor of the Cube when ppl check it out...
dasaint said:
well all i can tell you is i am currently running a Wizard and a Jawbone together im running TNT1933 HTC/Professional
voice dialing thing might mean you are using the old voice dialer... did you change it so that it uses MS Voice Command if not (go into START --> SETTINGS --> Buttons) mine is setup like this
Button 1 Messaging
Button 2 Internet Explorer
Button 3 Camera
Button 4 Voice Command
Button 4 (HOLD) Record
Button 5 Comm Manager
make sure voice command is set to button 4...
the phone screen (dialer) when i read this i am thinking the old version of the phone dialer the one that came with the wizard nativly... if you mean the voice commander MIC icon then say it like that cause it makes no sense... i was able to use this after i installed Voice Commander, changed the button and Added the bluetooth device then reset the unit... after that everything worked great...
Click to expand...
Click to collapse
Hi,
Thank you for that, my buttons are set up precisely like yours.
By phone screen, I mean the one with the TNT logo at the top left-hand corner, along with a headset icon. This is the same thing that pops up when I click the green phone button. Note that this is NOT the voice command mic icon. When I click the button on the headset, I want the mic icon to pop up and take a command.
Any suggestions?
Hi guys
When I connect the phone with the usb cable activesync makes a BEEP every 5 minutes. I cannot find the registry key to disable this. Anyone know it?
BTW i'm trying to disable the BEEP when I press the red HANG key. I know the sound played is "dpadctl.mid" and I disable it on all the registry keys it appears, reset, and is still making that sound everytime i press that key.
It might help a little too if you told us what Phone Device you are using and what ROM/Radio you are using.
I don't think it helps too much since the registry keys for events are the same for all windows mobile phones with WM5 and WM6.
I got a TyTN (HERMES 200) with Super D-Lite ROM.
Please close thread.
I found the solution disabling the active sync sound. (well, that's more a workarround than a solution)
And for the HANG KEY i found more registry keys with the sound. I previously missed it cause i searched '\windows\dpadctl.mid' and not 'dpadctl.mid' directly.
I hope this is usefull for somebody.
Hey Man Im Having The Same Exact Problem On My T-Mobile Wing How Do I Disable That I Only Find That dpadctl Sound in Windows File Explorer windows/ Can You List A Step by Step to Disable It ?
My elderly mother-in-law has a wm6.1 smartphone (TMo Dash) and recently got a bluetooth headset. As with most headsets, a single click of the "call button" on it answers or initiates a new call. The problem is she continues to accidentally hit the very sensitive call button and makes call to the most recent number in her call list. Is there any way to prevent a single tap of the call button from automatically dialing the last caller on the phone end (perhaps via a registry edit). I dont know if this is specific to the Dash wm6.1 ROM, or a feature with wm6.1 in general.
BTW, click and hold of the call button activates voice command. It would be great if a single click would activate voice command.
Any suggestions?
Cyberon Voice Command usually takes 1 click to open voice dial and a long click to dial the last number.
I wanted to get rid of voice dial and i managed to do that but i still can't get rid of that "accidental dialing" thing you're talking about.. so i call people and they get to talk to my thigh once or twice a day
One click for Voice command would be OK for her, because VC would just wait for a command then give up. Unfortunately, her phone has one click for last number redial, and long click to activate Voice Command. She is always accidentially clicking the bluetooth button whenever she is handling it, and for some reason I'm the one it calls. When I answer, she usually has just put the thing in her ear and did not realize she called.
I wonder what controls the BT functions, and how these two phone have it differently.
look for Cyberon Voice Speed Dial.
that'll grant you what you wish for
Hi All,
I have looked all over for weeks and still can not seem to find how to do extra digits on the HTC Fuze. On my Treo 800w I had an extra digits button, but I can't seem to find the equivalent in either the HTC or the WM dialer.
As an example, if I have a contact with the phone number 6025321234w1234234#p1232#
On the Treo 800w, after the call was placed an "Extra Digits" button would appear. If clicked on it then everything after the w would be dialed.
On the fuze I am not getting this button and don't see anyway to do it. Could someone let me know what I am missing?
Thanks,
d
Use , for pause use either w or p for wait (I think its w) and press send during a dial to send next set of numbers. Works on my Touch Pro
Ah, that was it pressing Send. Never would have guessed that in a million years and there is no hint in the dialer that it even knows the extra digits were there.
Thanks!
d