After several times of flashing different roms, I can not enter 3 color screen by hardreset or bootloader reset!!! Is there any way to get my treo750 back to live?
Related
hello, i currently have the faria rom installed. the rom version is 3.3.0.0 with extrom faria v4.0. whenever i try to flash a newer faria wm6 rom, it doesn't want to work. i open the upgrade utility and everything seems to be working fine, then when it starts the process it first tries to restart the phone, but instead of restarting, it just stays off and doesn't come back on. i tried other roms, and even the t mobile 2.26 rom and still no luck.. anyone have a clue to whats going on? thanks.
try install a different rom first to see if it does the same
I've tried 4 different roms including the official t mobile 2.26 rom and still no luck...
A friend of mine had similar. If you run any RUU program the phone just turns off and won't turn back on (without pulling the battery). We tried numerous things (including forcing bootloader by using the camera button and another with a method listed here:
http://forum.xda-developers.com/showthread.php?t=294107 so give that a shot) and it still wouldn't work. He called Cingular and they are shipping him a new phone (warranty exchange).
Have you tryed HardReset & reinstall Active Sync and then try again to flash ?
thank you very much guys you were both biiiiiig help! i forced the phone into bootloader mode with the camera button, then turned it back off and on. then when i ran the update utility again this time it didn't just stay off it restarted normally and entered into the bootloader mode. thanks again!!
I have tried 4 different versions of WM6 from here...Some of them after the upgrade do not run at all.The device hungs up at the splash screen, i reset the device ,hard reset the device ,remove the battery but nothing happens.
This lately occured after installing faria's rom.
Other roms after entering the main screen ,start menu etc, they crash which after each reset happens over and over again...
I'm starting to wonder...is something wrong with my device?
Many times this happens even with the official qtek rom.
Just a question, have you unlocked your phone?
How do i tell if its unlocked or not?
I never had a single problem during an upgrade...but crashes keep on happening right after or in the proccess of a hard reset, i repeat , even with the official ROM, which took me today 2 hours to make it install and run smoothly at last! (unexpected resets , not loading after hard or soft reset)
The device now works fine but it took me so much time to bring it to that condition that i wont be flashing it again unless something very bad happens.
put your device on bootloader then downgrade it to your official rom then after running you have to unlock before reupgrade to any other WM6.0 rom
hi everyone. yesterday i installed dr. gonzo's wm6.1 rom in my VOX. it was great and it worked perfectly in my phone.
The main problem started when i restored the backuped data. I took, This backup with sprite backup tool before upgrading my mobile from wm6.0 to wm6.1. when i restored this data taken in version 6.0, in version 6.1, i found that my homescreen is blank. whenever i press start button i find the following message display on my screen: Cant Find ':MSSTART' (or one of its components). MAKE SURE THAT THE PATH AND FILENAME ARE CORRECT AND THAT ALL THE LIBRARIES ARE AVAILABLE.
The same messge appears when i press any numeric key replacing MSSTAART with MSCDIAL.
Actually, when i backuped the data it also backuped the registry settings and when i restored the data it applied version 6.0 registry settings to version 6.1.
Now, neither my phone is getting connected to the activesync nor it is getting HARD RESET(I tried many times to Hard Reset it, but never succeeded. What happens is that as soon as i press the POWER button while holding both the soft keys, the phone TURNS OFF).
Please cananyboby help me? can anybody tell me that is there any other way to hard reset? or, how can i restore the phone back to factory settings?
Thanks for understanding my problem so patiently.
hoping to get a solution soon.
thanks
Get the battery out for a few seconds and put it back, and then do a hard reset.
But I think that you are not doing hard reset correctly, you have to press power button and both soft keys while your phone is turned OFF, then your phone will ask you to pres green button and it will do a hard reset.
must press the green dail key to comfirm the reset operation
error in uPgrading the ROM
Ive tried many times to hard reset but it dosent seems to take place. i tried to reflash my phone from the bootloader mode but it dosent seem to fi my problem. it showed an error while reflashing stating IMAGE FILE IS CORRUPT. IVE attached an image of that error.
any help???
LOL~~~
I see, first shut down your s710, hold the 2 soft keys
and then press the power button shortly (must not too long)
ive performed hardreset 3 times earlier but this time i cant hard reset just because of the problem. the problem is that none of its functions are working. i really need some help this time!!!
I am using this rom, it can be hardset by this method.
hold the 2 soft keys utill dialog show, press the power about 1.5-2 sec.
Hard reset capabilities are not dependant on the ROM. You need to properly flash with a signed HTC ROM or USPL and then an unsigned ROM. I don't think you're doing the proper steps involved to hard reset or to flash correctly. Re-read the Wiki.
Problem Solved
I was trying to flash 6.1 version after the problem occured so it showed IMAGE FILE currupt. Then I tried to flash the original(manufacturer's) version in the bootloader mode. everything went properly and my vox flashed perfectly.Now i've once again flashed the 6.1 version and is working great.
'My hearty Thanks' to everyone for the help and support.
No matter what rom i flash on my fuze, it always hard resets itself after a soft reset. It always says "setting up your windows device" after a soft reset, which erases everything. Or, on the rare occurrence it doesnt do that, after a soft reset, it will load up, but nothing is there, as in no programs, weird numbers and letters, etc. I havent had a problem loading a rom before until NATF 4.6, but i have the same problem with ShEps rom, i just dont get it
try flashing back to OEM rom and then try to flash to a different rom. Try someone elses who you haven't tried flashing before.
Hi, I have tried to reset my phone to a factory settings several times, but it was never switched back to the initial settings of a brand new phone. Prior to trying to do this reset, I have tried to root the phone by installing TWRP (I was never successful according to a few root checker apps) and then was stuck with being unable to remove TWRP from the phone. I managed to do that a few days ago with the help of Odin and a stock firmware, however I didn't get the initial settings of a brand new phone. When I do a factory reset, I see a blue screen with an android icon and a message ''Erasing data'' but when I launch the phone I always see a yellow background that I setup in December. I don't see any custom installed apps, only the default ones, but since I want to sell the phone I would like to be able to reset the phone back to the initial settings without a yellow background showing on a Home and Lock screens. Any help?
luxserpie said:
Hi, I have tried to reset my phone to a factory settings several times, but it was never switched back to the initial settings of a brand new phone. Prior to trying to do this reset, I have tried to root the phone by installing TWRP (I was never successful according to a few root checker apps) and then was stuck with being unable to remove TWRP from the phone. I managed to do that a few days ago with the help of Odin and a stock firmware, however I didn't get the initial settings of a brand new phone. When I do a factory reset, I see a blue screen with an android icon and a message ''Erasing data'' but when I launch the phone I always see a yellow background that I setup in December. I don't see any custom installed apps, only the default ones, but since I want to sell the phone I would like to be able to reset the phone back to the initial settings without a yellow background showing on a Home and Lock screens. Any help?
Click to expand...
Click to collapse
this may sound dumb, but ive had this exact same issue on many previous phones, and it was resolved by doing a factory reset from within the GUI a few times, yes literally do it at least twice, and then doing a factory reset in the stock recovery literally 3 times, and for the overkill, flash the factory tarball via odin for giggles. If that doesnt do it, not sure what else will
youdoofus said:
this may sound dumb, but ive had this exact same issue on many previous phones, and it was resolved by doing a factory reset from within the GUI a few times, yes literally do it at least twice, and then doing a factory reset in the stock recovery literally 3 times, and for the overkill, flash the factory tarball via odin for giggles. If that doesnt do it, not sure what else will
Click to expand...
Click to collapse
I'll do all that one more time to remove the gold screen, leave the phone aside and purchase a new phone for use. I'm sure it will work since nothing had changed since the last year when I knew the phone last time by hear. Thank God, phones don't talk. I'm sure it will work because it worked with all other phones I had since I know them so well. I wish I thought of it earlier. How smart!