Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.
you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human
paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
- ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
What is you SPL Version?
NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.
As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?
NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.
Hi all
my device is CID Unlocked (pof tools)and i need to send back to repair center.
i want my Kaiser back to Original SPL.
HTC TyTN II
KAISER: KAIS130
SPL-1.56.0000
IPL-CPLD-8
Can body help me creating easy installation file like "KaiserCustomRUU"+NBH file .
thanks in advance
copysat said:
Hi all
my device is CID Unlocked (pof tools)and i need to send back to repair center.
i want my Kaiser back to Original SPL.
HTC TyTN II
KAISER: KAIS130
SPL-1.56.0000
IPL-CPLD-8
Can body help me creating easy installation file like "KaiserCustomRUU"+NBH file .
thanks in advance
Click to expand...
Click to collapse
A great little guide can be found here. It's for the AT&T Tilt, but you can get the general idea from it. Just replace the AT&T with HTC references where applicable.
copysat said:
Hi all
my device is CID Unlocked (pof tools)and i need to send back to repair center.
i want my Kaiser back to Original SPL.
HTC TyTN II
KAISER: KAIS130
SPL-1.56.0000
IPL-CPLD-8
Can body help me creating easy installation file like "KaiserCustomRUU"+NBH file .
thanks in advance
Click to expand...
Click to collapse
I would also like to keep something like that handy. it would be great if some wiz could make it happen. Thanks in advance
TaurusBullba said:
A great little guide can be found here. It's for the AT&T Tilt, but you can get the general idea from it. Just replace the AT&T with HTC references where applicable.
Click to expand...
Click to collapse
thanks for the hand but i am not that expert to do so ,but i will give it try ,if some one can do this for us "all user" will be grat ,we might need it for life .
good luck
got it worked out? pls i need the same thing right now for my tytn ii
did u get it to work? need the same for my kaiser now :S
bjluv said:
did u get it to work? need the same for my kaiser now :S
Click to expand...
Click to collapse
did you read this??? the mod already provided a link... no one here is going to spoon feed anymore than that (reposting link ... in case you missed it)
http://forum.xda-developers.com/showthread.php?t=335568
People cant read and/or search.....
I need help
1 Procedure to write rom in K jam
2 who to unlock sim by useing WST
nskhan said:
I need help
1 Procedure to write rom in K jam
2 who to unlock sim by useing WST
Click to expand...
Click to collapse
why don´t you ask your question HERE:
http://forum.xda-developers.com/showthread.php?t=329170
?
KAIS130
SPL-1.93.0000
CPLD-8
how to unlock Cid n flash Any romm plz help me thanxs
harry_01 said:
KAIS130
SPL-1.93.0000
CPLD-8
how to unlock Cid n flash Any romm plz help me thanxs
Click to expand...
Click to collapse
As per the Forum Annoucment by JimmyMcgee on things you must do before posting...
RTFW
Dave
DaveShaw said:
As per the Forum Annoucment by JimmyMcgee on things you must do before posting...
RTFW
Dave
Click to expand...
Click to collapse
Sorry bro actually i m folow setp by setp but i can't unlock so i need some help plzzzzzzz
harry_01 said:
Sorry bro actually i m folow setp by setp but i can't unlock so i need some help plzzzzzzz
Click to expand...
Click to collapse
Check your PM.
Dave
DaveShaw said:
Check your PM.
Dave
Click to expand...
Click to collapse
thanxs Bro solved my problem
Hi,
i have succsessfully unlocked my mda but i have forgett to extrakt and save the orginal hardspl whitch was spl-1.56.0000 with nbhextract.exe
the mda works... but mabye a newly spl version is better for my mda i guess...
so mabye one of you can help me to find the original spl or a better one that works on my mda....
i have read and searched the The Ultimate Radio Thread but i can't find out whitch one is the right one for me... as an excuse my english is not the best...
sorry & thx
download update to 6.1 from your countries T-Mobiles website.
For example: Dutch
It restores all settings to original
help me
spuniac said:
Hi,
i have succsessfully unlocked my mda but i have forgett to extrakt and save the orginal hardspl whitch was spl-1.56.0000 with nbhextract.exe
the mda works... but mabye a newly spl version is better for my mda i guess...
so mabye one of you can help me to find the original spl or a better one that works on my mda....
i have read and searched the The Ultimate Radio Thread but i can't find out whitch one is the right one for me... as an excuse my english is not the best...
sorry & thx
Click to expand...
Click to collapse
hi there can you help me what software did you use to unlock
Dust2Dust said:
download update to 6.1 from your countries T-Mobiles website.
For example: Dutch
It restores all settings to original
Click to expand...
Click to collapse
Not if you flashed Hardspl. The rom will go back to the original rom, but the hardspl will not go back to the stock spl. For that you must find your stock spl and use jumpspl to re-lock your phone to the stock spl and rom.
sameer2515 said:
hi there can you help me what software did you use to unlock
Click to expand...
Click to collapse
Just follow the easy steps here to unlock your phone.
http://forum.xda-developers.com/showthread.php?t=433835