The Cruise doesnt have an OK button. I find it frustrating to use the DPAD for scrolling, but then have to reach to the top to tap the OK button in the upper right hand window of the window. Is it possible to remap a hardware button to this task?
I tried AE Button, but it doesnt seem like AE button behaves properly for me on the Cruise.
Does the red phone button not act like an ok button on your phone?
AE Button does work. I use it on my Cruise and have mapped the IE button to become the OK button. One thing I have noticed is that depending on which ROM you are using, sometimes you have to select the "OK/Close" action and other times you have to choose the "Close active application" action.
I Hope this helps
The red phone button does exaclty that.
Why do you map this action also on another button?!
TDO
TDO said:
The red phone button does exaclty that.
Why do you map this action also on another button?!
TDO
Click to expand...
Click to collapse
No, the red button will only minimise the application but it doesn't act like an OK button. In any screen or dialog where you need to press OK, pressing the red button will only take you back to the Today screen and will not press OK. By mapping a hardware button to have the OK feature, the button searches for the OK button on the screen and presses it.
mkhattab said:
No, the red button will only minimise the application but it doesn't act like an OK button. In any screen or dialog where you need to press OK, pressing the red button will only take you back to the Today screen and will not press OK. By mapping a hardware button to have the OK feature, the button searches for the OK button on the screen and presses it.
Click to expand...
Click to collapse
I have Dinarsoft's Handyswitcher for task management. I use the following key mappings to supplement for lack of an OK/Windows Button(s):
Long Press Phone start - HandySwitcher Menu
Messaging Button - Launch QuickMenu
Long Press End button - Suspend
IE button - Close app (using Handyswitcher)
Update: Use AE Button
Thanks for all the suggestions. After reading your thoughts I re-attacked the problem. It turns out AE Button will work. You can set the IE key to be your OK button. Actually AE works great!
The conflict was between AE and S2u2. I did not realize S2U2 has a conflict with AE.
Issue resolved.
I really love the Cruise. I have owned the 3300, 3600, TYTN II and I like the 3300 and cruise the best. Why? The are feature packed and very light. If you dont need a keyboard (and trust me, its overrated to have a keyboard) the cruise is great.
kunicki said:
The conflict was between AE and S2u2. I did not realize S2U2 has a conflict with AE.
Click to expand...
Click to collapse
If you still want to use S2U2, you can use a setup like I posted above. No conflicts using S2U2 and I have the functions that I need without the use of a button mapper application.
Maybe I'm not understanding your problem here, but just map it using the Buttons icon in Settings. There's a choice in there for <Ok>/<Close>. I have the ok button mapped and it works great.
hambola said:
Maybe I'm not understanding your problem here, but just map it using the Buttons icon in Settings. There's a choice in there for <Ok>/<Close>. I have the ok button mapped and it works great.
Click to expand...
Click to collapse
same thing for me, except the O2 Orbit 2 variant actually shows a "Windows" logo button on the left and the "OK" button on the right. i have to map them as such because I'm using a custom ROM.
hambola said:
Maybe I'm not understanding your problem here, but just map it using the Buttons icon in Settings. There's a choice in there for <Ok>/<Close>. I have the ok button mapped and it works great.
Click to expand...
Click to collapse
Let me rephrase that, I mapped the ok "action" to a hardware button. It can be mapped to any button, in my case I just used the top left one (for Voice).
The best for me was to map the left messaging button to win-start, double to messaging, and long press to rotate fo tomtom, the right one to ok, doubleklick to opera, long press to vibratemode.. ... i had the same on my old tytn... works perfekt with aeb-plus.
greets
voxid
Related
Ofcourse I can lock the screen by pressing the power button (and having de XDA go standby), but I wish to lock the screen while listening to mp3's.... How can I lock the screen ? If I need a separate application, please let me know your suggestions ....
tscargo said:
Ofcourse I can lock the screen by pressing the power button (and having de XDA go standby), but I wish to lock the screen while listening to mp3's.... How can I lock the screen ? If I need a separate application, please let me know your suggestions ....
Click to expand...
Click to collapse
If you meant that you wanted to switch off the screen without putting the XDA on standby, here's how. Just assign one of the buttons to "Screen Toggle" when Windows Media Player is running. On the Windows Media Player menu, select Tools->Settings->Buttons. Then map one of the buttons, such as Button 2 (Contacts), to "Screen Toggle". After that, pressing the mapped button will switch the screen on and off.
Jargon said:
On the Windows Media Player menu, select Tools->Settings->Buttons. Then map one of the buttons, such as Button 2 (Contacts), to "Screen Toggle". After that, pressing the mapped button will switch the screen on and off.
Click to expand...
Click to collapse
I tried this 3 times and each time when I press the button (I assigned button 3- the camera button) I got a strange black and white flashing strobe on the screen which I couldnt get out of without a soft reset. Anyone else had this or knows how to deal with it?
UK badboy said:
I tried this 3 times and each time when I press the button (I assigned button 3- the camera button) I got a strange black and white flashing strobe on the screen which I couldnt get out of without a soft reset. Anyone else had this or knows how to deal with it?
Click to expand...
Click to collapse
Dunno how to deal with it but I can confirm that I have exactly the same issue. Screen Toggling does not work and ends up in a flash show that doesn't look very healthy for the display.
works fine on xda 1 running ppc2003 :\ any programs to make the screen do this automatically? say if i was to run tomtom gps?
UK badboy wrote:
I tried this 3 times and each time when I press the button (I assigned button 3- the camera button) I got a strange black and white flashing strobe on the screen which I couldnt get out of without a soft reset. Anyone else had this or knows how to deal with it?
Dunno how to deal with it but I can confirm that I have exactly the same issue. Screen Toggling does not work and ends up in a flash show that doesn't look very healthy for the display.
Click to expand...
Click to collapse
Work's fine with my XDA2, no problems at all, I assigned button 2 to the screen.
no problem doing it for me with xda with 2002 rom 3.1804
Also works fine on my XDA II. have you tried using the Calenda/Contacts buttons to toggle the screen instead of the camera button? Just a thought.
try this nifty lil program i found on emule works great on pc2002/2003 i have jog button installed to my calendar button just press the button and the screens off press power button to turn back on very simple or hold my calendar button down and the calendar coems up
just transfer to your xda/pda and click it to turn screen off or toggle it to one of your buttons
gaz
gazzaman2k said:
i have jog button installed to my calendar button just press the button and the screens off press power button to turn back on very simple or hold my calendar button down and the calendar coems up
Click to expand...
Click to collapse
Screenoff works perfect, but how do you manage to let the calendar button have a double function?
Found a prog cald jogbutton here http://www.yorch.net/downloads/JogButtonSetup.zip, but this doesn't seem to work on Pocket PC PE 2003.
job button works fine on ppc2003 i have it on my xda :\ just assign calendar or contacts to job button then load up jog button click on setup then apply it to the progs you want it to open.
prob i found with pc2002 with screen off is it doesnt come back on with the power button lol so here is screen on for peeps with pc2003 no need to install this if on pc2003 as it works fine on it
use button plus v2.0 from yorches site i find it better then jog button as it allows double tap buttons and doesnt go crazy when turniong screen off on tomtom 2 lol
gazzaman2k said:
job button works fine on ppc2003 i have it on my xda :\ just assign calendar or contacts to job button then load up jog button click on setup then apply it to the progs you want it to open.
prob i found with pc2002 with screen off is it doesnt come back on with the power button lol so here is screen on for peeps with pc2003 no need to install this if on pc2003 as it works fine on it
use button plus v2.0 from yorches site i find it better then jog button as it allows double tap buttons and doesnt go crazy when turniong screen off on tomtom 2 lol
Click to expand...
Click to collapse
I'm not withyou on this jog button thing bro. Can you talk us thru it again from the start. I have this program installed and cant get it to do anything. Much thanx...
install jog button then.....
assign either contacts or the calendar button to the shortcut in th startmenu so it starts up jog button.
then hold the button down you assigned it too....
you will see setup appear i nthe bottom left hand corner with the button still held in click on setup using the stylus then assign programs from within that menu its very simple to do :roll:
anyway found a better program its called button plus v2.0 download it from yorches site in the software section works much nicer
Guys, this is what I have done with my button mappings and so far it seems to be working reasonably well. Well, reasonably enough that I am happy with it/can live with it.
Now I am very nit-picky and am coming from a heavily customized WisBar world. But in my quest to be stylus-free (and loving the WOW-factor of TF3D), I am able to live with the device by making the changes listed below.
-+-+-+-+-+
1. AEBPLUS - Volume Buttons
o Remapped volume buttons to provide Up/Down scrolling
o HOLD volume up or down - normal volume control
I did this because the TP was rejecting calls on its own whilst in my holster -- you know, the "press any volume button to mute the ringer" feature.
Note that if you do this, don't forget to look at the "Restore Volume Slider" option in AEBPlus (that guy thought of everything). I have all of mine unticked. Also take a look at: Options|Other Options|Control Volume Directly.
Screenshot: http://auxiliary.razer7.com/aevolume.png
··········
2. AEBPLUS - Phone Key ("Green Phone Button" in AEBP)
o Press once = Phone Button
o Press twice = Task List (Swipe left shows Programs)
o Press three times = Action List <-Note the Cut/Copy/Paste here!
Screenshots:
Task List: http://auxiliary.razer7.com/tasklist.png
Task List - Swipe Left: http://auxiliary.razer7.com/programs.png
Action List: http://auxiliary.razer7.com/actionlist.png
ABOUT THE TASK LIST: The Task List (and Programs list) is all touchable. AEBPlus provides its own task list as well but it isn't as nice as the one that I am using nor is it fingerable. The one that I am using is a freeware program called "MortButtons".
Download MortButtons here:
http://www.sto-helit.de/index.php?module=download&action=list&category=13
NOTE: Don't forget to also download the "ClickLED" skin on the same page. This skin closely matches the TF3D colour scheme.
During my testing, I've noted that MortButton uses about 250K (if you decide to leave it resident (recommended!)) and zero CPU since it is being called by AEBPlus.
ABOUT THE ACTION LIST: The "Action List" (as pictured above) is part of AEBPlus and can be custom-catered to your liking. I like to keep it simple and simply have cut, copy and paste in there, as well as toggle Wi-Fi (which works on the TP).
··········
3. AEBPLUS - End Call Button ("Red Phone Button" in AEBP)
o Press once = End Call
o Press twice = Last Task (ALT-Tab)
o Press thrice = Call DinarSoft TapText*
* "TapText" is a little utility that allows you to create a menu with clippings in it. I used it for email addy's and more. Check it out. I find it very useful and worth the ten bucks to register.
Screenshot of TapText in action: http://auxiliary.razer7.com/taptext.png
-+-+-+-+-+
4. About the Home and OK Buttons...
Now these two buttons *can* be mapped using AEBPlus, however, they can't be *re-mapped*.
In other words, if you map something to these buttons, they will also perform their inherent functions (i.e. the Home button will always go home first; the OK button will always send an OK message to the system, etc.)
Personally, I have left these two alone.
-+-+-+-+-+
CLOSING COMMENTS:
Now there is MUCH MORE you can do with the above two apps in the configuration I've described. Customize it to your delight.
I hope that this post helps some of you guys out. I need to give back to this community!
This community R0X.
Thanks for sharing. Will try this out as soon as possible.
You're very welcome!
I was playing around with this setup earlier today and so far, it has been working really well.
Take care.
I have AEBPlus and it is working great. My home key is mapped to be the start menu on a single press and torch on a long press, the back button closes active applications on a single press. My soft keys are mapped to lock the device and contacts. Works perfectly for me.
I'd already re-mapped the volume buttons as you did, though for a different reason. I use MS Readern often, and find the circular direction button on the TP pretty useless - I try to press arrow down and get the centre keypress instead more often than not. The volume buttons are a perfect substitute.
On tip though - when mapping the volume buttons it works best if you map double click and triple click to none. Doing otherwise gives confusing results.
Excellent post Minus-1, AEBPlus is a program I'd been looking for since getting my touch pro and the Mortbuttons program is proving to be a very useful program itself. one q though on the button options list in AEBPlus which ones cover the touch pros 'home' button and '<-' button
grezz said:
On tip though - when mapping the volume buttons it works best if you map double click and triple click to none. Doing otherwise gives confusing results.
Click to expand...
Click to collapse
Absolutely. I have only single click (directional up or down) and press-and-hold (volume control).
I often double-click the volume button to move up two elements, etc.
Excellent tip. Something definitely worth noting!
P.S. One quick note about the smartwheel: I used to HATE it but now I LOVE it. U have to get used to it and memorize the length of your stroke, etc. Once you do, tho, honestly, doing things become a breeze (especially whilst reading RSS).
yan2k said:
Excellent post Minus-1, AEBPlus is a program I'd been looking for since getting my touch pro and the Mortbuttons program is proving to be a very useful program itself. one q though on the button options list in AEBPlus which ones cover the touch pros 'home' button and '<-' button
Click to expand...
Click to collapse
Hiya, Yan2K!
I'm glad that you're enjoing AEBPlus and MortButtons.
In AEBP, the '<-' is mapped as the "OK Button" (which is precisely what that button means; some people like to call it the "back button" but it actually send a WM_OK message to the system).
As for the HOME button, you will have to map it...
In AEBPlus, go to the FILE|ADD BUTTON menu entry and press your HOME button. The TP will go back to the home screen but don't worry -- AEB is still running. Just click on your Quick Menu in the home screen (upper right corner of your task bar) and switch back to the AEB task.
Now remember: if you map these two buttons, they will NOT unmap their original functions... I generally leave these two buttons alone m'self.
Cheers!
thanks for the quick reply. I've created the 'home' button as you instructed, ended up with 'button #00ED' but cant get it to do anything either on 1-2-3 or long button press nor can i get the 'ok/<-' button to do anything either. prob doing something stupid can you help? ideally i want to be able to run a program on a long 'home' key press
Well mine is working, but not when TF3D is the active application. I remaped the (Long press) Home butoon to Second Today, and when I press it (long) it opens Second Today. Again, only when the TF3D is *not* the active program.
Hope that makes sence...
Cheers,
Cacti
yan2k said:
thanks for the quick reply. I've created the 'home' button as you instructed, ended up with 'button #00ED' but cant get it to do anything either on 1-2-3 or long button press nor can i get the 'ok/<-' button to do anything either. prob doing something stupid can you help? ideally i want to be able to run a program on a long 'home' key press
Click to expand...
Click to collapse
Mapped the volume buttons as you did. Just what I was looking for. Also set 'back' to proper 'ok/close'.
Cheers.
I think,the original functions are hardcoded somewhere(dll or something else). We need to find the file and modify it to disable these functionalities.
I remapped the "green" button the following way:
1 press) Phone application
2 presses) Alt+Tab
However, now when there is an incoming call I can't use it to answer. Which is quite logical.
Is there a way around this?
le_cactus said:
Well mine is working, but not when TF3D is the active application. I remaped the (Long press) Home butoon to Second Today, and when I press it (long) it opens Second Today. Again, only when the TF3D is *not* the active program.
Hope that makes sence...
Cheers,
Cacti
Click to expand...
Click to collapse
played around with it and found purely by chance that just like you said you cant use the home button or '<-/ok' button to do anything when you've actually got the TF3D home screen showing. hopefully someone will come up with a workaround for this as although i can make use of the '<-/ok' button it pretty much makes the 'home' button redundant for anything else but its original purpose
yan2k said:
played around with it and found purely by chance that just like you said you cant use the home button or '<-/ok' button to do anything when you've actually got the TF3D home screen showing. hopefully someone will come up with a workaround for this as although i can make use of the '<-/ok' button it pretty much makes the 'home' button redundant for anything else but its original purpose
Click to expand...
Click to collapse
Oh man, the OK button is one of the buttons I miss the most.
Specially while texting and such.
I hope I can remap some of the full keypad buttons as well.
I noticed that it sometimes doesnt' start up well, but oh well.
I re-maped the volume down to Ok/Close and Volume up to Start Menu
Then changed the volume settings to long hold, Which half the time when i press the buttons the volume comes up. haha.
hello!
I want to remap some buttons and I've tried with AE button Plus without success. Can you help me?
What I have is the call button configured for a long press to cyberon voice dial.
The disconnect button long press is for vibrate / ring.
what I want is to turn home and back buttons long press to wifi and bluetooth on/off and.
is it possible?
can I do this without AE button +? like a registry change? would be even better... or another program suggestion is also a good help!
Please help!
deiota
Is it able to remap the PTT button? That would be AWESOME.
dumb question, but where can I download AEB Plus?
I can't find a direct link or site to get the program!
Thanks...
http://ae.inc.ru or ask directly the author AE(here on XDA-Alexander Eltsyn).
So, is there any way to change the mapping on my keyboard? Like the hot button keys really get in my way, and I'd rather have a TAB key than a CAPS key, and stuff. So is this possible yet?
Do you guys have any idea on How to change the Home button to start menu?
I use AE BUtton Plus.. works great.. you will have to "add" home adn back buttons to be able to program them
GREGHARKINS said:
I use AE BUtton Plus.. works great.. you will have to "add" home adn back buttons to be able to program them
Click to expand...
Click to collapse
Isn't there a free program? I mean isn't this a simple tweak. Also, what do you mean by add a home and back buttons?
AEBPlus is a program,which can handle all keydown events sent from keyboard driver to the OS and modify/use them to control other things with ANY key. If your key isn't in predefined list,it can detect the keycode and you can remap it. Perhaps,unfortunately the home and back keys(and the qwerty as well I think) are sending direct WM messages to going home or Ok/Close and nowadays we cannot disable these functions at all to be sent to OS,even tough we can handle them and use with other functions. That means,you can map on these buttons anything with AEBPlus,but you cannot get rid of their default functions(overall it does 2 actions at once - going home and AEBPlus action mapped).
TomasNM said:
AEBPlus is a program,which can handle all keydown events sent from keyboard driver to the OS and modify/use them to control other things with ANY key. If your key isn't in predefined list,it can detect the keycode and you can remap it. Perhaps,unfortunately the home and back keys(and the qwerty as well I think) are sending direct WM messages to going home or Ok/Close and nowadays we cannot disable these functions at all to be sent to OS,even tough we can handle them and use with other functions. That means,you can map on these buttons anything with AEBPlus,but you cannot get rid of their default functions(overall it does 2 actions at once - going home and AEBPlus action mapped).
Click to expand...
Click to collapse
in other words we can't change it easily?
GREGHARKINS said:
I use AE BUtton Plus.. works great.. you will have to "add" home adn back buttons to be able to program them
Click to expand...
Click to collapse
How do I add the home and back buttons?
every time I add a button then click on home, it minimize down AEBPlus
Don't worry about it. Click on "Task Manager" (top right corner) you will see AE button there; select to open it. Button #00ED and #405C are "Home" and "Back"
AE button doesn't work well on RRE's ROM. I don't know if it works as it should on the other ROM or not.
Nghiem said:
Button #00ED and #405C are "Home" and "Back"
Click to expand...
Click to collapse
Aha, now that's interesting! #00ED is the button that is added for the PTT button on the Fuze, as well. No wonder that adding an action in AEBP for the PTT button does the same thing when the Home button is pushed!
wmm said:
Aha, now that's interesting! #00ED is the button that is added for the PTT button on the Fuze, as well. No wonder that adding an action in AEBP for the PTT button does the same thing when the Home button is pushed!
Click to expand...
Click to collapse
Yes, I agree! It is really weird... I did the hack to add PTT_LongPress.lnk to the windows folder and made the PTT longpress goto my commanager. This will overide when AEB tries to change longpress on the call & PTT. You cannot change the short press of the call button, at least I don't know how. So in theory my longpress of the call button now is voicecommand & my longpress on ptt is commanager.
I used AEB to program single/double/triple press of the PTT button also.
Sometimes when i hit the Home or call button though the camera comes up which is assigned to single press.
AEBPlus needs to update their program for the Diamond and TouchPro before I will register it..Someday
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
guitarlp said:
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
Click to expand...
Click to collapse
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
noellenchris said:
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
Click to expand...
Click to collapse
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
remap soft keys on HOME screen of TF3D
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
bmarkoff said:
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
Click to expand...
Click to collapse
Use advanced config and you can set them that way. You have to soft reset aftewards...
guitarlp said:
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
Click to expand...
Click to collapse
There is a new version of AEBPlus out, however it still doesn't get along with the Fuze very well. I Finally uninstalled it and am happy with short/long press only on the PTT. I also run GScroll and use it to double touch the capacitive screen to launch stuff...much better...
home soft keys for PI8
please explain where in Advanced config do I go to change a setting for the 2 soft keys for the home screen. I can't find anything. I found it in Diamond tweaks under 14.5 but it does not give me an option to select PI8.
The long keypress for Green button can be solved by standart button settings as a "Button1(Hold)". I have mapped for a longpress the phone interface that way(1click I use as Alt+Tab). I don't know about red button,because I use red button to instantly drop the call and this feature is missing in my version of AEBPlus and I don't need to upgrade.
Hi all,
Been looking around for a way to change my volume buttons so that i can use it to scroll up and down (using goodlink and everytime i click on a item it goes into that item and not do a show preview on the preview panel)
Does anyone know of a bit of kit that would do this job? Have looked at "advanced config" but cant seem to find a way to change/map the volume buttons to make them scroll up and down a list.
Thanks
Sorry all...looks like i answered myy own question. Finally found the below to sort out what i need and it works with the topaz!.
Sorry for the same and FYI the thread is below.
http://forum.xda-developers.com/showthread.php?t=409243&highlight=remap+volume
"What works for me is AEButton Plus (payware, no affiliation). I have reconfigured my volume buttons to single press = arrow up/down and long press to volume. The program has a nice function: you can choose to let the volume buttons have their default behavior during a phonecall.."
Fine, thank u. And it works on your Touch Diamond 2 Topaz?
yep works a treat on my Diamond 2 topaz
...i do have netcf 3.5 installed before i installed AE buttons aswell for other programs (not sure if that will matter for AE buttons)
im not really getting along with it.
cant see the optino for changing what the volume keys do etc.
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Hmm, interesting thoughts! Especially if the remap is done automatically, and only when the camera is launched.
Regards,
PK
toady2k1 said:
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Click to expand...
Click to collapse
I believe this issue with scrolling will be resolved with WM6.5 when you can slide the bar up/down to do a selection. In the meantime I use a simple method to scroll/select - say a SMS message. I open the abc phone pad (icon at bottom of screen) and then use the up/down keys (at the bottom) to scroll.
AE Button Plus
Just to confirm.. AE Button Plus DOES allow you to remap the volume buttons to up/down arrows. Just installed it on mine (Touch Diamond 2) and it works perfect.
The setting-up routine isn't obvious though.
When you see your list of keys in AEBP, pres and HOLD on the "Volume up" item. Takes a few seconds for the config menu to pop up.
I then used the following options from the config screen:-
3. Handle by AEBPlus
1. Single Press
5. Press Up arrow key
Then do the same for the Volume Down key, obviously changing the last option to 6. Press Down arrow key.
Then File/Save & Exit, and off you go.
paalkr said:
Originally Posted by toady2k1 View Post
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
--->
Hmm, interesting thoughts! Especially if the remap is done automatically, and only when the camera is launched.
Regards,
PK
Click to expand...
Click to collapse
Very interested in this one =) anyone found a way to do this?
sorkig said:
Very interested in this one =) anyone found a way to do this?
Click to expand...
Click to collapse
Try this...
http://forum.xda-developers.com/showthread.php?t=555821
This program can assign any of the hardware buttons to do what you want...
I've set the back button Launch the 'camera' app if it is held for a while and to act as the capture button when taking a picture. It also acts like a normal 'back' button when in other apps such as file explorer,opera, etc.
toady2k1 said:
im not really getting along with it.
cant see the optino for changing what the volume keys do etc.
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Click to expand...
Click to collapse
Using the software provided in this thread it's possible:
http://forum.xda-developers.com/showthread.php?t=555821
See this thread where I explain how to do that:
http://forum.xda-developers.com/showthread.php?t=557546
Works like a charm!!
You can remap all your hardware buttons.
Cheers
Can some one post AEBPlus.cfg/ Button registry
I copy my button's from att tilt ( registry exported adn imported thru back up and restore process) so now on my Pure I have many buttons. Can some post their AEBPLus.cfg adn button registry export?
v3patel said:
I copy my button's from att tilt ( registry exported adn imported thru back up and restore process) so now on my Pure I have many buttons. Can some post their AEBPLus.cfg adn button registry export?
Click to expand...
Click to collapse
This program is much better than AEB.