I flashed my phone 2 days ago from on spv e650 to wm 6.1 gonzo and yesterday it was working fine (battery life was brilliant even with bluetooth, wifi, and checking for emails over gprs) I charged it last night and this morning the phone told me it was "roaming" with a little triangle beside the gprs logo, i switched it off and back on again and now, every 5 minutes my phone vibrates, theres no alerts on the screen or anything, ive turned all comms off, taken the battery out and back in and stopped my email from refreshing. theres no sound with the vibrate and the phone is not on silent. its driving me crazy, help me
its the vibrating alert script i guess
try removing it from the startup folder.
You have missed a call, or unred SMS/email, or appointment...
Check this first.
On my phone that thing got stucked and would vibrate even if there was no event to vibrate for. I ended up formatting it, but if you know there are no missed calls or anything that you may have missed try to delete all the call logs, and then make a call to the phone and wait until it vibrates past 5 minutes, then view the call to make it stop, and reboot the phone. Maybe it works for you
If you can wait a few days I can cook you a custom ROM based on Dr. G's but without the Notification script and wm5torage wich you will need to install seperately if you use it.
Roland
Thanks guys, as i had only just installed the new rom i decided just to do a hard reset and it fixed it as i wasnt going to lose anything
You just need to remove the script "notify.mscr" from the startup and reboot. That will solve your problem. You don't need to hard reset or flash your phone to stop this.
i had the same thing tomorrow. just turn it off... go to the startmenu->all progs->System folder->Config notification->"disable script"
done!!!!!
Related
Okay. I have had this same problem at least once on three different devs' WM roms. It happened first with VJ's WM6 3.2, then again on 3.4, then again on 3.7. Then it happened once with Nitro's WM6. Now, just last night, it happened again on GnatGoSplat's WM6.1s.
I have no idea what causes it. I can't replicate the problem. I just notice it after it happens.
I'll get to where I'm going and take my phone out of the holster, switch it from Vibrate to Normal, and set it down. Then I'll either receive a call or message, or else I'll pick up the phone to send one, and notice that it's still on Vibrate. Oops, must've forgotten to put it on Normal. So I switch it to Normal. It says "Normal" for about a second, but the Vibrate icon stays put, and then it switches from "Normal" to "Vibrate" by itself.
When this happens, I can't figure out how to get it back into Normal mode. Soft reset, hard reset, pull-the-battery. Nothing. The only thing I can do is re-flash the ROM.
But here's where it gets interesting. After all this happens, when I plug the phone into the computer via USB (WinXP), ActiveSync starts up, connects, and then pops up a dialog box that says ActiveSync cannot synchronize with the device. The AS window still shows it as being "Connected" but not "Synchronized". I can explore, copy, move, whatever. I can even reflash the OS. Which I do.
And then all is well.
Until it happens again.
Kicker: When it happened to Nitro's WM6, it was the same day Gnat released his 6.1, so I flashed that instead. And when he updated it and fixed a few things, I flashed that one. And I used it 24-7 without even a soft reset from the day it was released until approximately a week ago, when I installed moalesipufos' 6.1Pro RC4, just to test it out. It lasted all of an hour until I decided I just couldn't figure out the interface and wanted my GGS6.1s back. So I reflashed Gnat's ROM onto the phone.
A week later I get this.
So that was a long and (probably) boring description of my problem, but as it is so random and confusing, I wanted to make it as clear as possible in the hopes that someone, anyone, would read it and have some clue what the problem is - including whether it's user error or an ID=10T error.
So. Anything?
Thanks a ton!
I've had my phone for about six months. Overall i'm happy with it.
But since a couple of months, the phone is rebooting for no reason at all.
it reboots (most of the times) when
- my phone rings
- i get a text message
- when it is set to vibrate and i get a phone call
- in the middel of a conversation
- i do nothing. The phone is just on my desk and i see it rebooting
I sent it for repair once. But nothing changed.
Now i hoped by upgrading to 6.1 the problem would be solved. But it's not. However, there seems to be error reporting in 6.1
Last time it rebooted i got the message there was a problem with quickdial.exe
All i can find on google is that it has something to do with TouchFlo. How can i turn quickdial off and what does it do?
Sounds like a call to customer service waiting to happen
kenhas said:
I've had my phone for about six months. Overall i'm happy with it.
But since a couple of months, the phone is rebooting for no reason at all.
it reboots (most of the times) when
- my phone rings
- i get a text message
- when it is set to vibrate and i get a phone call
- in the middel of a conversation
- i do nothing. The phone is just on my desk and i see it rebooting
I sent it for repair once. But nothing changed.
Now i hoped by upgrading to 6.1 the problem would be solved. But it's not. However, there seems to be error reporting in 6.1
Last time it rebooted i got the message there was a problem with quickdial.exe
All i can find on google is that it has something to do with TouchFlo. How can i turn quickdial off and what does it do?
Click to expand...
Click to collapse
Hi guys, i like my fuze but damn, its not perfect, i have had this thing freeze couple times, but here are the problems ive had so far. sometimes when im receiving a phone call it will ring for 1 second then hang up, ring 1 second again, hang up, it keeps doing it, and after each ring & hang up session it makes it appear as a missed call. another problem ive had is with the End key, its not responsive sometimes, when i try to hang up a call i will think it ended because the dialpad went away but the call is still going and will go to voicemail or whatever. also if i havent turned off the phone for a while sometimes i cant access the messaging portion of the phone unless i soft reset. is there anyway to cure these problems, and am i the only one having these problems.
If your on a stock rom FLASH IT... the At&t Rom sucks, download advanced config and change the end call delay to something WAY LESS then 3000 milliseconds (which is a 3 second delay just for hitting the end key) mine is at like 50 milliseconds... put the ROMeOS rom for the Fuze on it or something else whatever you feel is the best i use ROMeOS.... oh and when the phone hangs itself up is it all the time or is it only when its in your pocket?
Stock from AT&T including OTA update.
It's not working for missed calls, nor sms's, nor anything else.
Mechanically sound, goes red for charging and green when charged.
Yes, it is enabled for those notifications in the settings.
If you have a confirmed solution or very strong hunch, please post it here.
Thanks "in advance" even though I hate saying that.
Umm... I guess try the basics?
clear cache, restart, etc. If all else fails factory reset.
And now, 7 hrs later, it works again .... BUT
So now, the only difference is the phone is fully charged.
But the LED does flash now for missed SMS, call, and missed Email ( note: I have Notification for missed Email disabled, but it still flashes ).
Only problem is it stops flashing in about 1 minute .... so let me now ask, does anybody know how to extend the time the LED flashes?
Seriously, with all the power of these new phones, it's ironic that BB's from 8 years ago had LED notification that worked properly.
But thats about all BB's from 8 years ago did, they flash and give you a messsage. make sure its enabled in your settings and wipe cache, I haven't seen anything on adjusting the time. MIne flashes until I remove notification. Good luck!
This morning my alarm did not sound. Checked all settings everything was set to on.
Tried to call the phone no sound. Re-booted and everything is now working as it should.
Also 3 times in the last two days the screen has frozen and I have had to reboot the power using the power button.
Has anyone else had these issues?
I am using this as stock with the latest OTA update.
Same issue here.
Everything is working fine, but ~1-2 Times a day the Screen stays black and won't turn on again until a reboot via the power button. But the touch is working, because after the reboot some of the apps on my homescreen are moved (because I moved them while whiping on the black screen). Everything else is fine, CM11S Stock latest, *33R.
Just changed the Gov from "Interactive" to "On Demand", no other Modifications.
Greets, Alex
I'm having problems in this area as well, my notification will not work. I do not get any notification sounds at all even though everything is on. My call ringtone work fine, nut no notifications, not from email, or my third part oultook email app, and neither from my SMS's. It was all finw in the beginning but now it just stopped working. I got the phone with 33r and stock, have not done anything to the phone yet, and don't want to, but i cant figure this issue out.......any help would be greatly appreciated......
Same problem here.
kevace1 said:
I'm having problems in this area as well, my notification will not work. I do not get any notification sounds at all even though everything is on. My call ringtone work fine, nut no notifications, not from email, or my third part oultook email app, and neither from my SMS's. It was all finw in the beginning but now it just stopped working. I got the phone with 33r and stock, have not done anything to the phone yet, and don't want to, but i cant figure this issue out.......any help would be greatly appreciated......
Click to expand...
Click to collapse
I have also same problem... Do you get any solution for this ?
Just realize with your post that I have not posted an update......I like a certified dildo, had my phone in 'night' mode from the advanced power menu.... Put back to normal.....issue resolved......I would prefer more notification choices out the box, but that's easily fixed.....
Sent from my A0001 using XDA Free mobile app
Perhaps related to Quiet Hours getting stuck?
kevace1 said:
Just realize with your post that I have not posted an update......I like a certified dildo, had my phone in 'night' mode from the advanced power menu.... Put back to normal.....issue resolved......I would prefer more notification choices out the box, but that's easily fixed.....
Click to expand...
Click to collapse
Interesting. I've been having the same problem, and this prompted me to take a look at my Quiet Hours setting. On the Quick Settings panel I noticed that the Quiet Hours icon was lit. That was odd, because I was well outside of the quiet hours I had set. When I tapped the icon, it would not change. I had to long press, toggle a setting, and exit back out before the icon started working normally again. Now everything seems to be fine. Hope this helps someone; the problem was driving me nuts!
I too have had this issue! No lights, sound and action
But I solved my problem :=) on my own because I'm Mister Wonderful :>
I reinstalled the quiet hours tile.
Then I went into quiet hours setting and changed hours from 00:00 & 00:00 to 01:00 & 07:00. The latter being outside the current time of day I was working in.
Then I went back to the quiet hours tile and turned it off. Holy Smokes this time it actually worked.
Because the power charger was connected the notification lamp began to burn green again. SMS notification sounds were heard. Even "You got mail" wasn't afairid to stand up to be heard.
Another wonderul day in paradise!