Related
Hi guys! I can't seem to get a GPS signal on my touch cruise using Mapking!!
Is there any programs out there to check if my GPS device is working fine ?
I think my GPS unit is spoiled! How come ?!
Anyone have this problem before ? I even downloaded a separate program call GPS Viewer and it didn't seem to get any signals at all!
Daft question, but have you gone through the setings to make sure the gps is turned on.
Also go outside to get a lock on the gps, its works better.
Did you check the GPS settings in the control panel?
You have to set and then provide the correct COM port in order to get any GPS software to work with an in-built GPS device.
its on auto detect. And previously i was using it perfectly well! it just happened today! Then i have no idea why...
Did you update QuickGPS? Unless its broken, the GPS unit will eventually find a signal. It just takes a while (up to 3 minutes) which might be longer than the timeout in the app. If you update QuickGPS, then it will find a signal within 30 seconds usually. Perhaps your QuickGPS download is past expiration date. Usually, its set to get new QuickGPS data everytine you active sync by default. maybe you havent' activesync'd in a while (last week or so) or you need ot manually update it.
Mapking Fix
Look on Mapking's website:
http://www.mapasia.com/AD/HTC/HTC_TYTNII_ENG.htm
They're reporting a bug and a link to a fix for the gps in HTC units that shipped with their software bundled.
Hope this helps.
Lom
I'm using MapKing 2007. Not the MapKing R12 that came bundled with it...
And i try to use with GPS Viewer that has nothing to do with Mapking and it also didn't detect any signals.
Could it be the hardware has spoilt ?
Sorry - not a development issue as such but I'm hoping you guys can help with another HTC Touch Pro (A)GPS query. I have read a number of other posts on this but they appear to be inconclusive and I'm not sure if the problems widely reported elsewhere are supposed to have been resolved in the latest shipped ROMS.
I'm experiencing very long acquisition times with the internal GPS on the O2 XDA Serra (just released in the UK), to the point where the GPS is virtually unusable. Cold lock can take anywhere between 15 and 30 minutes, even in open ground in good weather with a clear view of satellites. By comparison, a Garmin eTrex Vista in the same location gets a lock in seconds. I never expected the XDA Serra to equal the performance of a dedicated handheld GPS but I would have expected it to get an initial lock in less than 5 minutes in clear sight.
If and when a lock is acquired, it seems to hold OK and I've experienced no major lag problems.
I'm using Tom Tom Navigator 5, Memory Map Pocket Navigator OS 5 and Google Maps. I've also installed a couple of GPS utilities from this forum - Chartcross GPS Test 1.04 and the HTC GPS Tool v1.1.1.0. These are all configured to point to COM4 at 38400 baud (as per advice in this forum), and I've never had a problem detecting the GPS.
What is bizarre and frustrating is that there is absolutely no mention of GPS functionality in the supplied O2 manual, other than a brief warning about not operating a GPS while driving. The XDA Serra is not supplied with any GPS software or utilities out of the box other than an "External GPS" utility in the System folder, which is completely undocumented. I'm unclear in what circumstances you are supposed to use this utility, but I'm assuming it allows you to set a hardware COM port for an external GPS device (presumably bluetooth?) and select whether or not it is managed by Windows. I've tried turning this off but it appears to make no difference.
I'm aware that the XDA Serra is AGPS capable but I'm unclear exactly what this means in this context (i.e. which particular AGPS technique it actually uses), and how - in the absence of an explicit Program or System setting - my installed GPS applications are supposed to invoke it. I have checked the relevant registry settings in HKLM\Software\HTC\SUPL AGPS:
EnableAGPS 0x00000000 (0)
GPSMode 0x00000002 (2)
Number Fixes 0x3b9ac9ff (9999999999)
QoS Accuracy 0x00000032 (50)
QoS Performance 0x00000059 (89)
Server IP 10.1.101.63
Server Port 0x00001cb6 (7275)
TimeBetweenFixes 0x00000001 (1)
... and can see that the AGPS function is currently disabled (the default), but is this supposed to be enabled programmatically by the GPS application, or do you have to set it explicitly? If the latter, how can you do this other than by hacking the registry?
I have followed advice in this forum about disabling GPS logging (it was disabled by default) using the Schapman Advanced Configuration Tool v3.3.0.0. I have tried enabling the AGPS function using a registry editor, but again it appears to make no difference. In addition, I could see no evidence of it having downloaded an emphemeris file anywhere (unless it's hidden in system ROM), which I presume is how it is supposed to work? If I enable it, doesn this necessarily mean that any of my GPS apps will actually use it?
I have tried using SeaSGEE to download emphemeris data to no avail - it downloads what looks like a good packedEmphemeris.ee file OK but it makes absolutely no difference to performance. I have since uninstalled this and deleted the //windows/packedEmphemeris.ee file.
Finally, if I connect an external bluetooth GPS adapter (the Emtac BTGPS) on COM6 I generally get a good cold lock in less than a minute. I used this all the time on my old XDA Mini S (HTC Wizard) and never had a problem.
So, basically, I'd like to understand how native AGPS works on the Touch Po, how it is supposed to be invoked by GPS applications, and whether there are any tweaks I can try to improve performance over and above the ones I've already tried. Is this a problem that is likely to be improved in subsequent ROM or Radio versions or is this simply a fundamental limitation of a crappy internal GPS chip?
Any advice greatly appreciated.
AGPS
AGPS is basically a utility for operator to be able to track your device for various local ads etc. It uses servers to track instead of GPS.For example Google maps would be able to track your position inside building but with tolerance of a few miles (I guess it is your closest tower) Seems to be some kind of bug when operating with regular GPS (in my case it shuts off GPS every 10-15 seconds making Tomtom unusable.You should see settings for AGPS at Settings-System-AGPS. Disable both tabs. On tomtom use other wired GPS receiver at Baud rate 38400 com port 4. restart after setting AGPS. It did work for me.I have Fuze - same as HTC Touch Pro. Let me know if it works better.
This is exactly how the Fuze is acting. Cold locks (after a soft reset or power off/on) take up to 30 minutes to get. But once you do get a lock, things work as they should. Even AT&T sales reps sat there with me, with 3 different Fuzes and witnessed all three phones doing the same thing. It must be the built in GPS chipset. The Sprint Touch Pro I had for a week, never had any cold lock issues.
I was worried that O2 had modified versions without the GPS module becuase I have never managed to get a lock with the device. Nomatter what I do GPS doesn't seem to work.
It is annoying as I've managed to fix every other problem the Serra ships with. Including getting rid of the default home page for opera when launched vial TFL3D. That was a huge pain in the ass as the XML file cannot be deleted or modified easily, it is an undying file. Damn file protectiona and access rules on WM devices.
is there still isues with gps on this phone?
i'm due an upgrade, currently using a diamond, and find gps is fantastic, locks in a couple of seconds nearly everytime, even after not using it for week still seems to get a fix in under 20 seconds, was looking at the touch hd as i thought it was essentialy the same phone, buf beefed up a bit, but i use gps 3-4 hours everyday, so far this phone seems perfect apart from the gps issues..
i've tried searching but can't find any clear information about it, seen various tweaks but no one can confirm it definatly works, my phone's primary use is gps, would i be a fool to upgrade to the serra?
Tyr said:
I was worried that O2 had modified versions without the GPS module becuase I have never managed to get a lock with the device. Nomatter what I do GPS doesn't seem to work.
It is annoying as I've managed to fix every other problem the Serra ships with. Including getting rid of the default home page for opera when launched vial TFL3D. That was a huge pain in the ass as the XML file cannot be deleted or modified easily, it is an undying file. Damn file protectiona and access rules on WM devices.
Click to expand...
Click to collapse
OK. I had the same problem, never got locked on GPS.
It is ALL software issue. Flash different rom, new radio (recommend 20M1) and use tomtom7. Older tomtoms for some reason do not invoke gps receiver on touch pro. GPS on serra works perfect, on mine it takes about 20-30 seconds to get satellite lock. Relax Just flash rom different that the o2 one.
The GPS is rock solid on my XDA Serra with fast GPS start-up times with the PROven ROM - http://forum.xda-developers.com/showthread.php?t=444653.
I did have GPS problems with the standard O2 ROM, as others have said it's a software issue.
All issues have been SOLVED
Hi. just go to this post and you will have a gps lock in a matter of seconds. enjoy. thanks
http://forum.xda-developers.com/showthread.php?t=467374
Go to http://www.my-xda.com/software_updates.jsp to download the latest software updates for every O2 XDA mobile!
Yes I just updated my ROM and the difference is HUGE. Almost instant connection with my GPS.
Yes, apparently O2 removed QuickGPS because at some point they planned to enable their own AGPS servers, but did not get round to it and forgot to add back QuickGPS.......
The Avatar said:
Yes I just updated my ROM and the difference is HUGE. Almost instant connection with my GPS.
Click to expand...
Click to collapse
hi the avatar
which ROM did you go for on your serra, i am having similar probs
just when i thought i had sorted it following other suggestions on this forum, beginning to think the gps was single use
cheers
r
I've seen lots of people complaining about poor GPS performance - slow to lock, not finding many sats, lag, etc.
But I can't get anything at all from my Touch Pro. I've tried several radio roms, no difference, tweaking the registry settings, and programs called GPSID Settings, GPS Test, and HTC GPS Tool, all without any success.
I believe I should be able to use the HTC GPS Tool to debug, and see the actually serial output of the onboard GPS? But I can't even do that, whatever serial port I try to open I get the message "Failed to send NMEA command...". This suggests to me that the onboard GPS is not giving any response at all, rather than not being able to lock?
Can anyone confirm 100% what com port and baud I should be able to find the on board GPS with? Is there anything else I can try?
BTW, my external B/T GPS works fine with my touch pro, but it would be nice to have the onboard GPS working too.
TP GPS always uses COM4 and any baud (I've tried 4800 to 115200).
Your post is not a "thread" yet and I doubt it will be.
Just search the other threads.
a bit dettered when reading all these GPS problems. Once I've got mine I've had no problem at al besides it showing me a bit off the road in Google Maps. as far as for settings its always been the same COM4 Baud 4800
mike-b said:
I've seen lots of people complaining about poor GPS performance - slow to lock, not finding many sats, lag, etc.
But I can't get anything at all from my Touch Pro. I've tried several radio roms, no difference, tweaking the registry settings, and programs called GPSID Settings, GPS Test, and HTC GPS Tool, all without any success.
I believe I should be able to use the HTC GPS Tool to debug, and see the actually serial output of the onboard GPS? But I can't even do that, whatever serial port I try to open I get the message "Failed to send NMEA command...". This suggests to me that the onboard GPS is not giving any response at all, rather than not being able to lock?
Can anyone confirm 100% what com port and baud I should be able to find the on board GPS with? Is there anything else I can try?
BTW, my external B/T GPS works fine with my touch pro, but it would be nice to have the onboard GPS working too.
Click to expand...
Click to collapse
The default com port is 4. Usually most GPS application should be able to detect it automatically.
NLS said:
TP GPS always uses COM4 and any baud (I've tried 4800 to 115200).
Your post is not a "thread" yet and I doubt it will be.
Just search the other threads.
Click to expand...
Click to collapse
Sorry, I thought I did start a new thread, and I have searched - that's how I know about other people's GPS issues. But I haven't seen anyone else with the same problem as me yet.
I get nothing on COM4 at any baud rate.
TomTom says 'NO GPS Device'
HTC GPS Tool says "Failed to send NMEA command..." on COM4 (at all baud rates).
Google maps - when set to "Managed by Windows" just says Searching(0) and gives up after about 5 minutes.
When Google Maps is manually set to COM4 it says "Initialising.." in the top right corner then hangs, and then refuses to reload until I do a soft reset.
Is this what's supposed to happen?
No it's not.
You could have a hardware problem.
I had that issue after uninstalling google navigator 4 trial.Hard reset helped.
Also check Start > Settings > System > External GPS and make sure the Program Port is set to COM4, Hardware should be Port None and Baud at 4800 and Access tab should be checked to Manage GPS Automatically.
I have the "dreaded GPS lag" issue. I don't have this issue but I have found that my GPS is best with the Blackstone Radio 1.10.25.25. I still have to wait sometimes upwards of 3 minutes for a lock sometimes when the sky is cloudy but it seems to work pretty well.
I suggest you try the following
1. Flash to the radio I mentioned above.
2. Go to Start/Settings/System/AGPS Settings
On the General tab, uncheck "Enable AGPS
On the privacy tab, select the following options:
1. Enable AGPS location information to network services. Operator can get your location information.
2. When send location info. to network services: Send postion info directly
3. Close confirmation message after: 10 second
3. Go to Start/Settings/System/External GPS and make the following changes:
On Programs tab: set GPS program port to: COM4
On Hardware tab: set GPS hardware port to: (None)
On Hardware tab: set Baud rate to: 4800
On access tab: check: Manage GPS Automatically (recommended)
4. Follow the instructions posted by omega01 here:
omega01 said:
A lot of people have problems with the TouchPro GPS especially for pedestrian use...
From stock the TP GPS is quite unsable in car especially with TomTom 7 and totally unusable for pedestrian use.
After 2 weeks of reading and testing tweaks, here are the results of my tests and the applied tweaks to enhance the GPS performance
A. With Advanced config 3.2 http://www.touchxperience.com/fr/ou...ads/9-advanced-configuration-tool-32-cab.html
1. disable A-GPS
2. disable GPS logging
3. logfile name must be empty
4. old logfile name must be empty
5. maximum size of logfile must be 0
6 delete the files : \windows\GPSLogFile.txt and \windows\GPSLogFileBack.txt
7. it seems that if TomTom is installed on a fast microSD decrease the lag(have to test to be sure)
With those changes car usage will be quite perfect
B. Then edit registry with TotalCommander http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
Under: HKLM\SYSTEM\CurrentControlSet\GPS Intermediate Driver\
- Drivers\GpsOneDevice\PollInterval -> 100 (default is 1000)
- Drivers\InputBufferSize -> 512 (default is 4096)
- Drivers\OutputBufferSize -> 512 (default is 4096)
- Drivers\SleepOnNoData -> 100 (default is 1000)
- Multiplexer\MaxBufferSize -> 512 (by default not present, you have to create it)
Tests to be done with buffers at 256...seems to be a little better
Tests to be done with other PollInterval value...seems to "drain" battery
With those tweaks pedestrian usage will be much better but not perfect...I explain.
You have to walk for a least 250m in order to have a reposition with mouvement on the map (before that, speed is always 0km/h) and then if you continue to walk there is quite no lag...and the speed reflect reality
...BUT if you stops you have to walk again for a least 250m in order to have a reposition with mouvement on the map and then if you continue to walk there is quite no lag...
Very strange indeed...
I hope this will help people...please test and feedback.
PS : tests were done with
TomTom_Navigator_7.450.9028_R3_VGA_black_edition
GoogleMaps 2.2.0.16 -- http://www.google.be/gmm/GoogleMaps.CAB
GPSTuner 5.4 -- http://www.gpstuner.com/download/GPSTuner_v5.CAB
Click to expand...
Click to collapse
If that doesn't help you get a better, if not good, lock with your Touch PRO then you have to have some kinda of hardware problem.
I have an HTC Fuze from USA AT&T activated on T-Mobile USA and I don't even have access to T-Mobile's AGPS Servers and my GPS locks are usually relatively quick.
Good luck!
Dan
dharvey4651 said:
I have the "dreaded GPS lag" issue. I don't have this issue but I have found that my GPS is best with the Blackstone Radio 1.10.25.25. I still have to wait sometimes upwards of 3 minutes for a lock sometimes when the sky is cloudy but it seems to work pretty well.
I suggest you try the following
1. Flash to the radio I mentioned above.
Click to expand...
Click to collapse
I've been using .25.25 radio for the last week, changed to 1.09.25.35 today, but no improvement.
dharvey4651 said:
2. Go to Start/Settings/System/AGPS Settings
On the General tab, uncheck "Enable AGPS
On the privacy tab, select the following options:
1. Enable AGPS location information to network services. Operator can get your location information.
2. When send location info. to network services: Send postion info directly
3. Close confirmation message after: 10 second
3. Go to Start/Settings/System/External GPS and make the following changes:
On Programs tab: set GPS program port to: COM4
On Hardware tab: set GPS hardware port to: (None)
On Hardware tab: set Baud rate to: 4800
On access tab: check: Manage GPS Automatically (recommended)
4. Follow the instructions posted by omega01 here:
If that doesn't help you get a better, if not good, lock with your Touch PRO then you have to have some kinda of hardware problem.
I have an HTC Fuze from USA AT&T activated on T-Mobile USA and I don't even have access to T-Mobile's AGPS Servers and my GPS locks are usually relatively quick.
Good luck!
Dan
Click to expand...
Click to collapse
Rechecked all my settings, but they were all already as above. Still no joy. Only other possibility is that it's being crippled by the ROM I'm using - stock 1.90.206.4 WWE O2 UK variant, although no one else seems to be having the same problem. I am trying to avoid reflashing the main ROM, as it would take hours to get all my programs and settings back to how I want them. Maybe when the 2.0 firmware is released...
I guess it could be a hardware fault, but it seems a bit of a long shot. I really don't fancy my chances of trying to convince o2 that it's a hardware fault.
Try this...
1. Install and configure SecondToday to the left soft-key
2. Install HTC Home Plugin for VGA
3. Install GPSToday plugin and configure it to 5 minute manual-on
4. Go to Start/Settings/Personal/Today and disable all but TouchFlo 3D
5. On your new SecondToday, enable HTC Home and GPSToday
6. On HTC Home's Programs Tab, add your favorite GPS program(TomTom, Garmin, Google Maps, Etc...)
7. Start GPSToday by clicking on the little red box on the far left. It may take about 2 minutes on the first try(it's this way after every soft-reset) but after that it should be much faster. As soon as you are locked on to 4 or more satelites start your favorite GPS program that you added to the programs tab of HTC home.
If it works like it did for me, you should be set. I now get GPS locks in less than 10 seconds every "second time" since it takes about 2 mins after each soft-reset.
You can download all the files I mentioned above here:
http://download.ppchaven.com/CDMA Devices/HTC Vogue/Users/dharvey/CABS/CAB FILES.rar
Good luck!!
mike-b said:
Maybe when the 2.0 firmware is released...
Click to expand...
Click to collapse
IF you mean, not when
dharvey4651 said:
Try this...
1. Install and configure SecondToday to the left soft-key
2. Install HTC Home Plugin for VGA
3. Install GPSToday plugin and configure it to 5 minute manual-on
4. Go to Start/Settings/Personal/Today and disable all but TouchFlo 3D
5. On your new SecondToday, enable HTC Home and GPSToday
6. On HTC Home's Programs Tab, add your favorite GPS program(TomTom, Garmin, Google Maps, Etc...)
7. Start GPSToday by clicking on the little red box on the far left. It may take about 2 minutes on the first try(it's this way after every soft-reset) but after that it should be much faster. As soon as you are locked on to 4 or more satelites start your favorite GPS program that you added to the programs tab of HTC home.
If it works like it did for me, you should be set. I now get GPS locks in less than 10 seconds every "second time" since it takes about 2 mins after each soft-reset.
You can download all the files I mentioned above here:
http://download.ppchaven.com/CDMA Devices/HTC Vogue/Users/dharvey/CABS/CAB FILES.rar
Good luck!!
Click to expand...
Click to collapse
Thanks for that. I've given it a try and it doesn't get a lock or even see a single satellite for me. I assume the number in the green box that appears next to the satellite symbol is the number of satellites it can see? It never changes from 0 anyway.
I've never seen a single satellite with the onboard GPS, nevermind gotten a position locked. Beginning to think it's a hardware fault, or my phone got missed when they were putting the GPS in! Convincing O2 that there's a fault will be one thing, then I'll have to flash it back to stock, including the stock bootloader before I send it in.
NLS said:
IF you mean, not when
Click to expand...
Click to collapse
That's why I put a string of dots on the end ot it...
Don't you think it's imminent, why would they release it for diamond and not touch pro?
I had the same problem for about 2 months, could never get a signal. It was solved when I changed ROM's. I actually tried like 7 ROM's and GPS didn't work in 6 of them. Once I tried RSW's ROM with updated GPS Drivers,,, I am able to always get a GPS signal now.
I do use 2 programs though.
1. QuickGPS to download GPS data.
2. Chartcross GPS Test to open my GPS Port.
Then I open up any GPS program and they all work. (Google Maps, Live Search, iGuidance)
COM Port should be COM4 obviously. When I've used a few GPS programs that "scanned" my phone, they all set the baud rate to 9600. You can't change the baud rate in Settings, but if you have to manually set your baud rate in your program, set it to 9600.
GPS reception significantly affected by case.
Just a FYI. I was a Fuze owner with significant problems with GPS. Could not get it to connect to anything for anything with anything. After trying everything I found on the forum I followed the instructions on this thread ... http://forum.xda-developers.com/showthread.php?t=473481&highlight=lock. and got a lock in under ten minutes. Put my phone back in the case and could no longer get a lock. It then dawned on me that my aluminum case was interfering with the gps chip. Did a bunch of tests which confirmed the reception improved drastically outside the case. It doesn't seem to influence the radio reception however which I find a bit strange. Anyway. My gps works reasonably well and I think people will benefit from knowing something as simple as the choice of case could have something to do with their gps reception.
I am currently following a few websites to keep my news upto date with my ATT fuze. I have tried just about every single possible solution to get my GPS to work. Disabled aGPS, tried GPSTest, flashed various ROMs, tried various GPS programs, change poll interval to 500 ms, etc, etc.
I have owned this phone for 4 months now and I have yet to get a satellite lock to work. The closest I ever got was GPTtest running showing 6-7 different satellites in view, trying to connect to about 3 of them. I left that running for nearly 2 hours, and no luck. Whats the deal?
Please do not tell me to use the search function because I have searched XDA as well as google, and they all end up in the same place of speculation on why the GPS might not be working, but none of the said methods actually make it work.
It works man. I ran 6.5 beta with Google Maps installed. Took me to a location I've never been to and back.
xgm541, before using AGPS, do you have the right gprs settings for your phone? Have you confirmed that your gprs works?
Anyway, for the gps, read up on my thread about me finding an alternative way to get a better fix.
HERE:
http://forum.xda-developers.com/showthread.php?p=3514443#post3514443
Also, make sure you flash your radio if possible. Read up on the radio thread and i am sure other ATT users have posted the performance of GPS based on the Radio.
I am not an ATT user, as i am from Malaysia. So i am unable to help you on the AGPS part.
I second arvin's suggestion on flashing a radio. If you're in the US, I highly recommend 1.12.25.19, I have AGPS and GPS logging disabled, use GPS Test and always get a cold fix in less than a minute outdoors.
yeah ive got no issues with it, used it last weekend in the car and worked perfectly.
GPS definitely works. Flash the latest leaked AT&T rom, and just try it out. Don't flash cooked ROMs but the stock leaked ROM. If GPS doesn't work in that ROM then something is wrong with your particular phone. I'm in California and I get locks in under 7 seconds, and I'm using wm 6.5
GPS is about all that im unhappy with, on my fuze.
It does work, i placed a 3 stage multicache using only my fuze with googlemaps/GCz last week and everyone whos found the cache say my coords. were almost dead on. (coords were an average of around 20 readings at each site)
My trick (doesnt work fast but it works) is to turn on gmaps let it sit there for
1 min while it gets a lock, then switch to my gps (geocache) program and i have nps. I cannot get any other programs to lock or hold the gps without first running the googlemaps program. And everyonce inwhile as soon as i turn it on ill lock up 10 birds. Doesnt make much sense, and i too have played with all i could find (agps,baud,comport, windows settings etc)
good luck
I am using the standard HTC-ROM. All of these settings have been extensively tested in Europe the Netherlands. These are really the optimal, after testing many buffersizes, pollintervals etc. The most crucial one is PollInterval and SleepOnNodata needs to be equal or larger than PollInterval. Disabling or enabling windows GPS logging does not matter, as it is only used for debugging according to MSDN. If you start using AGPS (I Don't!) then make sure all settings are correct to download the info from your provider (mine does not support this and thus it is turned off in these settings).
0) Assuming that the hardware is still OK do the following:
1) Go to settings > System > external GPS.
Check if all options are still normal.
Program port is COM4.
Hardware port : none.
Baudrate : 4800.
Access: Check automated GPS control.
NOTE that an external connected GPS (e.g. Bluetooth device) unit will have a baudrate of 4800. The internal which resides at Com4 has a standard baudrate of 57600. These settings need to be checked to make sure they are still this way and it will also give Windows automated control of the GPS system.
2) You need to install Advanced Config 3.3.
http://www.touchxperience.com/fr/out…ol-32-cab.html
With Advanced config 3.3 under GPS:
1. disable A-GPS
2. disable GPS logging
3. logfile name must be empty
4. old logfile name must be empty
5. maximum size of logfile must be 0
6 delete the files : \windows\GPSLogFile.txt and \windows\GPSLogFileBack.txt
After these settings the tool will soft-reset your mobile.
3) Then edit registry with TotalCommander
http://ghisler.fileburst.com/ce/tcmdpocketarm.cab
Don't make any errors here, check your steps carefully.
Under: HKLM\SYSTEM\CurrentControlSet\GPS Intermediate Driver\
- Drivers\GpsOneDevice\PollInterval -> 100 (default is 1000)
- Drivers\InputBufferSize -> 512 (default is 4096)
- Drivers\OutputBufferSize -> 512 (default is 4096)
- Drivers\SleepOnNoData -> 100 (default is 1000)
- Multiplexer\MaxBufferSize -> 512 (by default not present, you have to create it, make a Dword value)
After these settings are in place, restart / soft reset your device.
4) Run the program QuickGPSfix and download the new data.
This step needs to be repeated anytime it is outdated.
5) Download and install the HTC GPS Tool.
http://rapidshare.com/files/84815853...C_GPS_TOOL.cab
Upon starting it should show COM4 and a Baudrate of 57600.
Go outside the house, preferably with good weather.
Hit the "Open"
Hit the "Nav. Int."
Leave all as is, no need to change the options.
You should now start to see the GPS data flow over your screen in the grey area. Wait patiently, the first fix can take up to 10 minutes (afterwards it wil go faster). If it fails it sometimes seems to help to move around a little bit and to reboot your device if it takes way to long (+10 mins).
See if you have any red bars below the satellite numbers (signal strength per satellite) When you get a fix, the bars and satellites to which it is connected will show up green. If there are no red bars here, no data flow etc then there is something wrong with the ROM / radio combination and your phone.
Close this program if you have a fix.
6) Start-up Google maps. Wait for it to download the basic map information, so you don't have any interference from the "now downloading data" message. Then start the GPS use. Fix should now go fast. Once it has a fix you can start moving towards your destiny.
From now on use HTC GPS tool to get a fix.
Close this program, start the program with which you want to use GPS.
Good luck, Jouke.
GPS works good enough.
I definitely suggest radio 1.11 or later.
Of course best to get the whole 5.05 ROM.
Work great! To nearly perfect location!
I'm using the ATT test ROM and google maps with street view.
Works better than any phone I've ever owned when the test ROM or a derivative is running the show. Matching radio must be used. I've tested the Ralphael 1.12.25.19 (shipped with test ROM) and the Blackstone 1.13.25.24 so far.
Messed around a bit more and got instant 10 sats after changing to
baud rate of 9600 on com4... i guess the windows management of the gps is most of the problem (?).
I had the same exact problem as you. I couldn't get a lock no matter what I tried, I was thinking of going back to the Kaiser. I then decided to change my radio from the .32 to the 1.12, left GPS Test running for about 30 minutes, still no lock.
I was standing on the balcony of my apartment....
Then..... when I got into my car I tried again and I got a lock in under 30 seconds..
Not to insult your intelligence by any means. BUT, are you outside in the open?? Because once you have set those settings that everyone here has asked you to do. It should work.
Here is what I did.
Change the stock radio. I believe this to be the main culprit. 1.12 works good. then set your standard GPS settings to Baud 96**** and to COM 4. Run GPS test in the open, outside.
It should work. I sometimes mess around with the AGPS settings. I mainly leave it off because I honestly have no idea what it is.
I get a lock in under 1 - 2 minutes every time. However, I am having a problem with the speed of the GPS. I use TomTom 6 and sometimes my triangle cursor wiggles oscillating from left to right. I don't know why. and also sometimes it is delayed.
I have yet to find a fix for this, I would be glad if someone can please help. I'm not sure if this is a video problem or a GPS problem.
Worked Both Ways
I've had my Fuze since just before ATT released them, and the GPS worked fine for me, once I could get a signal, obviously a big issue. I followed all of the GPSidfix cab etc and they helped, had to load GPS Test to prime, once it got a full lock and said running I could use Google, TomTom 6 or Livesearch and get instant locks.
I don't flash ROMs, but finally broke down and put the ATT Leaked Rom on my Fuze, and bammmmmm. GPS is almost instant in every single one of those applications, we're talking 2 or 3 seconds when I'm outside. I get locks in my house when I'm by the windows as well.
I haven't driven today, so I can't speak to lag etc or other issues, but once I knew the lag it never bothered me that much. Overall, the new ATT Leaked ROM has been awesome for GPS.
i never changed my radio, am using the stock radio on a fuze bought 1 1/2 months ago, i disabled agps and am using com4 baud 9600 super fast gps now.
GPS Position Lag w/ internal (built-in) GPS receiver
freekquency said:
i never changed my radio, am using the stock radio on a fuze bought 1 1/2 months ago, i disabled agps and am using com4 baud 9600 super fast gps now.
Click to expand...
Click to collapse
I can second or third... that.
Firstly, I don't mean to invalidate any previous comments, posts or fixes, or insult anyone's intelligence. I just merely report my VERY UNSCIENTIFIC findings.
I've had my ATT Fuze (HTC Touch Pro) for about 3 months now, and I've tested various GPS apps in the quest of finding out whether the hardware is the one to blame for the GPS POSITION LAG. I'd like to share my personal findings so that it may help others.
The ONLY GPS application that I can say that come very close to NOT having GPS POSITION LAG is Mobile Navigator 7.3.1 (build 137). On top of that, this version of Mobile Navigator is the only one so far to be ALMOST right on when the destination is reached. Other applications that I've tried always show the destination is 2 or 3 houses down the street.
The following applications I've tested all have position lag: one previous version of MN7, IGo8, TomTom 7, iGuidance, Garmin XT, and NDrive.
Did I use the registry tweak as suggested in previous post and did it resolve the lag?
Yes, I did try the tweak. But personally, I don't think it solved the problem.
Did I change to different ROM or Radio?
No. Everything on the phone is stock ATT Fuze.
So, is the hardware or HTC the one to blame for the lag?
Sorry! YOU have to come to the conclusion on this one.
I have a related problem, with the GPS device freezing (?) at high speed. I drove recently in Germany, and up to 120km/h my navigator (HTC-TP + Destinator 7) worked fine. When I drove faster it just stopped tracking, and resumed when I slowed down below 120km/h resumed.
Anyone experienced that or has an idea how to fix it?
Kepela523 said:
I had the same exact problem as you. I couldn't get a lock no matter what I tried, I was thinking of going back to the Kaiser. I then decided to change my radio from the .32 to the 1.12, left GPS Test running for about 30 minutes, still no lock.
I was standing on the balcony of my apartment....
Then..... when I got into my car I tried again and I got a lock in under 30 seconds..
Not to insult your intelligence by any means. BUT, are you outside in the open?? Because once you have set those settings that everyone here has asked you to do. It should work.
Here is what I did.
Change the stock radio. I believe this to be the main culprit. 1.12 works good. then set your standard GPS settings to Baud 96**** and to COM 4. Run GPS test in the open, outside.
It should work. I sometimes mess around with the AGPS settings. I mainly leave it off because I honestly have no idea what it is.
I get a lock in under 1 - 2 minutes every time. However, I am having a problem with the speed of the GPS. I use TomTom 6 and sometimes my triangle cursor wiggles oscillating from left to right. I don't know why. and also sometimes it is delayed.
I have yet to find a fix for this, I would be glad if someone can please help. I'm not sure if this is a video problem or a GPS problem.
Click to expand...
Click to collapse
TomTom7 also isnt working perfectly for me. It seems to be about 3-5 seconds too slow. It shows me at the street after I have already passed it. I made the registry setting changes that were posted earlier and will test the lag this afternoon ( it may be the Polling Interval being set to 1000 vs 100 i hope. I will report back to say if it has helped
My friend has the LG incite and run windows mobile. He has no media net, but is able to use gps just by using gpsgate and then the tom tom program. i was wondering if there is a way for us on the FUZE to do the same?
SEARCH SEARCH SEARCHH!! <<--- IDK why people don't use the search when we have it!!
all you have to do is turn off the AGPS in your settings. (Go to Start > Settings > System > AGPS Settings) and make sure Enable AGPS is NOT checked. You now have GPS without using your MediaNet!
Definitely did not work for me... Are there any other settings that I need? I turned off AGPS and went to my google maps and tom tom and can't get it to work.
.....google maps REQUIRES the internet to work, whether it's WiFi or MediaNet some sort fo internet is needed.
...as per TomTom it should work. I used to do it all the time until i actually got the data plan for myself.
See i don't want to get the data plan because its just for something I will use once in a blue moon. I just wanna have GPS in case I need it some time
okay...so TomTom or any other navigation software will work as long as you have the maps on your storage card...
I gotta wait till I get my phone back, but can anyone tell me if this works? (People without media Net of course) From my understanding it'll keep saying that its looking for a connection and can't get one.
not sure what "media net" is assuming it's some sort of isp
but gps don't require gprs or even a phone part to work
mind you most these gps's dont work indoors you have to be outside
or in a car and have a working tomtom set correctly up or gamin or any
other gps software suite
Media Net is ATT data plan they call it media net. Everytime I try connecting GPS it seems like its trying to use a data plan and since I shut it off by calling up ATT it seems like my phone is only trying to go through ATT and saying no connection
tomtom and gamin gps software should not use a data connection at all
if of cause the install include the cards of where one is located
the same software is run on pda's with gps but no phone
like many of the mio pda's
if your using some PirateBay copy of Tomtom or Garmin then you need to check the tags. Raphael is not a smartphone it's a PPC.
Advanced config take off aGPS.
MoDaCo nodata.cab
otherwise get garmin i've had very few problems once i figured out how to copy my maps from my c550 to my phone.
whats the point of having a phone as powerful as the touch pro if you aren't gonna pay for a data plan? thats like a car with no gas
FatalCharade said:
whats the point of having a phone as powerful as the touch pro if you aren't gonna pay for a data plan? thats like a car with no gas
Click to expand...
Click to collapse
albeit i do have a data plan, i debated it for a while when i realized i was spending 80-90 hours a week in the hospital which has wifi and so does the fuze....given the limited time out of wifi spots, i almost went without it.... but then chose to go with it for those times when i'm not in wifi spots...
Try Amaze Gps....turn by turn gps...and it doesnt use data....and best of all its free!!
amAze needs the user to have a data plan in order for it to operate. similar to google maps