How to unlock VOX0101 Phone Code.Sim Lock is open But phone is asking for Unlock.
Any body can help how to hard Rest to clear Phone code?
Reg
Irfangk786
press and hold the two keys in pic and press power button after relase power btton and hold the two keys markd with red,
u will see on the screen press send etc.....
wbr
Related
everything I have is in German (I think), does anyone have a english manual, and or be able to advise me how to perform a hard reset?
press power and softreset at the same time to do a hard reset
C.
Userguide in English:
http://www.my-xda.com/downloads/O2_Xda_Mini_S_User_Guide.pdf
cookie1977uk said:
press power and softreset at the same time to do a hard reset
C.
Click to expand...
Click to collapse
Totally wrong.
Press and hold the Comm Manager and Voice Record buttons.
Keep hold of these buttons and momentarily press the soft rest button with the stylus.
Carry on holding the side buttons for about 5 seconds until a black and white warning message appears on the screen
Release the side buttons and press the Green Send key to perform the Hard Reset.
Sounds complicated, but isn't once you know how.
Or you could use Start / Programs / Clear Storage. (I've deleted the shortcut to the latter because it's FAR too dangerous when someone else is playing with your phone!)
To lock the keys on the treo 750 you hold the option key then press the red hangup/power button. option+power that is.
Does anyone know how to bind a key so that this will work?
For instance... I currently am using AE Buttons on my treo and want to map the red power button to lock the keys if I press and hold it.
help!
Why wouldn't you just set the keyguard to always lock when power is switched off?
Then it requires no keypresses to lock the device, it always wakes up locked.
Settings-Keyguard-"When power is turned off".
One of my favorite Treo features.
ahh sweet, didnt know that option was there.. thanks
I need to make a hardreset om my Cruise. It wount start up.
What do I have to do?.
See 13.3 of your manual!
Press and hold the GPS and IE buttons, and at the same time use the stylus to press the reset button at the bottom of your device.
A message will appear and then you can release the buttons and press the send button (call).
Thanks, you saved my day.
I'm at work an the manual is at home.
Yes and for those looking for the "send" button, it is in fact the "green" button ;-)
please i have a vox0101 phone with lock code but forgot my code .can any kindly tell me which buttons to press to hardreset this phone.
To hard reset, turn off the Vox and hold your 2 Soft Keys (the keys next to your D-Pad on each side) and press the Power On, hold the soft keys for a few seconds and you will get a confirmation message - press the Green Start Call button to initiate a hard reset.
Did you forget the code to unlock your screen?
Turn off your phone, then press both soft keys and power on the device. After a short delay release the soft keys and you should be presented with a hard reset confirmation message on a black screen, to then proceed press your green phone button (or even the left softkey works if i remember correctly). PS shame you forgot your code, i did it once and will never again set a code, loosing all my data was a nightmare, anyway good luck
edit: looks like i posted the same time as h4waii, doh oh well.
Please let me know the sequence of buttons to press for a HARD RESET in Wizard.
Thanks.
please take some time to read the wizard wiki page, you'll learn alot
Press the comm manager button+voice dial button and hold this 2 buttons. Then make soft reset with stylus and u have to hold this 2 button so long, that u see a message on the screen.