everything I have is in German (I think), does anyone have a english manual, and or be able to advise me how to perform a hard reset?
press power and softreset at the same time to do a hard reset
C.
Userguide in English:
http://www.my-xda.com/downloads/O2_Xda_Mini_S_User_Guide.pdf
cookie1977uk said:
press power and softreset at the same time to do a hard reset
C.
Click to expand...
Click to collapse
Totally wrong.
Press and hold the Comm Manager and Voice Record buttons.
Keep hold of these buttons and momentarily press the soft rest button with the stylus.
Carry on holding the side buttons for about 5 seconds until a black and white warning message appears on the screen
Release the side buttons and press the Green Send key to perform the Hard Reset.
Sounds complicated, but isn't once you know how.
Or you could use Start / Programs / Clear Storage. (I've deleted the shortcut to the latter because it's FAR too dangerous when someone else is playing with your phone!)
please i have a vox0101 phone with lock code but forgot my code .can any kindly tell me which buttons to press to hardreset this phone.
To hard reset, turn off the Vox and hold your 2 Soft Keys (the keys next to your D-Pad on each side) and press the Power On, hold the soft keys for a few seconds and you will get a confirmation message - press the Green Start Call button to initiate a hard reset.
Did you forget the code to unlock your screen?
Turn off your phone, then press both soft keys and power on the device. After a short delay release the soft keys and you should be presented with a hard reset confirmation message on a black screen, to then proceed press your green phone button (or even the left softkey works if i remember correctly). PS shame you forgot your code, i did it once and will never again set a code, loosing all my data was a nightmare, anyway good luck
edit: looks like i posted the same time as h4waii, doh oh well.
Please let me know the sequence of buttons to press for a HARD RESET in Wizard.
Thanks.
please take some time to read the wizard wiki page, you'll learn alot
Press the comm manager button+voice dial button and hold this 2 buttons. Then make soft reset with stylus and u have to hold this 2 button so long, that u see a message on the screen.
it seems not to work
ideas anyone?
More info! What does it do/not do?
it just acts as a normal softReset.
what I'm doing is holding the comm manager button+voice button than with my stylus pressing the soft reset and letting go.
it's just reseting it self
alon2 said:
it just acts as a normal softReset.
what I'm doing is holding the comm manager button+voice button than with my stylus pressing the soft reset and letting go.
it's just reseting it self
Click to expand...
Click to collapse
Almost there.
When you press the reset button, hold it for a few seconds and then let go. Keep holding the comm manager and voice buttons until the screen says press the talk button to reset. Then let go of the top buttons and press the talk button.
ya only release the comm and voice when your screen display instructions
Mmmmm?
Maybe a Hardware.......
nonono Maybe a Software.......
nononono maybe a human fingers and syncronized speed ISSUE
Sorry men... i want to laugh a little....
bye bye
oooo
I didn't know that...would have save me a lot of trouble
well next time I'll know what to do..
thanks
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
guitarlp said:
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
Click to expand...
Click to collapse
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
noellenchris said:
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
Click to expand...
Click to collapse
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
remap soft keys on HOME screen of TF3D
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
bmarkoff said:
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
Click to expand...
Click to collapse
Use advanced config and you can set them that way. You have to soft reset aftewards...
guitarlp said:
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
Click to expand...
Click to collapse
There is a new version of AEBPlus out, however it still doesn't get along with the Fuze very well. I Finally uninstalled it and am happy with short/long press only on the PTT. I also run GScroll and use it to double touch the capacitive screen to launch stuff...much better...
home soft keys for PI8
please explain where in Advanced config do I go to change a setting for the 2 soft keys for the home screen. I can't find anything. I found it in Diamond tweaks under 14.5 but it does not give me an option to select PI8.
The long keypress for Green button can be solved by standart button settings as a "Button1(Hold)". I have mapped for a longpress the phone interface that way(1click I use as Alt+Tab). I don't know about red button,because I use red button to instantly drop the call and this feature is missing in my version of AEBPlus and I don't need to upgrade.