Related
I want to start out by saying I'm really sorry if I'm asking something stupid but I am a complete newbie and do intend to learn as much of this on my own as I can....
I took my brand new AT&T Tilt and I connected it to my Vista Laptop when it was charged fully and used the built-in Windows Mobile Device Center to do a quick connect (like a guest connect where files can be transferred but stuff isn't synched) and ran kaiser_HardSPL which gave me a white screen rather than the expected tri-color screen.
I found the solution for the white screen and did a reset by pushing the stylus into the small hole space on the bottom of the Tilt and then connected it again to my laptop and copied over JumpSPL1.56-KAIS to the phone. I then ran that app from the phone and the tri-color screen showed up. When 'USB' showed up on the screen I disconnected the USB cable for about 10 seconds and plugged it back in. The text 'USB' stayed on the screen and nothing happened after that. I then used the stylus again to reset the PDA again and I am now at my current step.
Am I ready to put a ROM on now? I'm so new to this and I definitely want to learn just not sure what's next....is my CID unlocked? Did everything go correctly or did I miss out on some important step?
What should I do next if I want to put a new ROM on? Whatever help anyone can give me would be very much appreciated.
Looking forward to becoming an active and contributing member to this great community!
Gas Addict said:
I want to start out by saying I'm really sorry if I'm asking something stupid but I am a complete newbie and do intend to learn as much of this on my own as I can....
I took my brand new AT&T Tilt and I connected it to my Vista Laptop when it was charged fully and used the built-in Windows Mobile Device Center to do a quick connect (like a guest connect where files can be transferred but stuff isn't synched) and ran kaiser_HardSPL which gave me a white screen rather than the expected tri-color screen.
I found the solution for the white screen and did a reset by pushing the stylus into the small hole space on the bottom of the Tilt and then connected it again to my laptop and copied over JumpSPL1.56-KAIS to the phone. I then ran that app from the phone and the tri-color screen showed up. When 'USB' showed up on the screen I disconnected the USB cable for about 10 seconds and plugged it back in. The text 'USB' stayed on the screen and nothing happened after that. I then used the stylus again to reset the PDA again and I am now at my current step.
Am I ready to put a ROM on now? I'm so new to this and I definitely want to learn just not sure what's next....is my CID unlocked? Did everything go correctly or did I miss out on some important step?
What should I do next if I want to put a new ROM on? Whatever help anyone can give me would be very much appreciated.
Looking forward to becoming an active and contributing member to this great community!
Click to expand...
Click to collapse
Quick question, and I'm not trying to be funny or anything, but did u read?
Thanks for the quick reply -- I did read the different threads that I thought would be dealing with this but was unsure of what to do after I did the white screen fix. The white screen fix said there was a way to test if it worked by checking a splash screen but when I ran that it said make sure you've already done HardSPL first otherwise it can brick your phone so I wasn't sure if I did actually do that step properly or not (of installing HardSPL).
I'd appreciate any help you could give me. Thank you again for taking the time to read my post!
Bronx31 said:
Quick question, and I'm not trying to be funny or anything, but did u read?
Click to expand...
Click to collapse
I can answer that!
I apologize for missing something obvious -- could anyone please point me to which thread I should look at?
Thank you.
No your device is still not ready.
http://forum.xda-developers.com/showthread.php?t=354061
You're on the right track. From what I gather you can indeed flash something at that stage on SSPL or continue on to flash HardSPL (which is what I believe you intended to do!). Get back to the stage you were at and, from the thread in which you found JumpSPL, flash HardSPL onto your phone. After that point you are totally ready to become a slave to dutty's roms...
Look here and ye shall find: HardSPL will not install - WHITE SCREEN: SOLVED
Well, first correctly install HardSPL, then go on flashing a ROM. You may find my FAQ usable. See my signature.
Nono... one more step to go.
After disconnect and connect usb flash hardspl then softreset.
bmueller77 said:
Well, if you correctly installed HardSPL which sounds like this, go on flashing a ROM. You may find my FAQ usable. See my signature.
Click to expand...
Click to collapse
Laurentius26 said:
Nono... one more step to go.
After disconnect and connect usb flash hardspl then softreset.
Click to expand...
Click to collapse
Already corrected it. But you were faster ^^
Thank you to all of you -- you're all being very helpful!
I ran the flash-hardSPL (ran the file in that folder called KaiserCustomRUU) and it gets all the way to where it is updating the rom image to the kaiser-hardSPL version and it shows 0% on my phone and 0% on the PC and after about a minute or so it says ERROR [262] : UPDATE ERROR ... it instructs me to remove my battery for 3 seconds, put it back in and try again.
I've done this twice now and keep getting the same error -- any ideas on what I'm doing wrong?
Thank you once again.
The only thing I can think about is that your phone is simlocked.
Do you have the usb cable connected straight to the pc or do you use a usbhub?
Gas Addict said:
Thank you to all of you -- you're all being very helpful!
I ran the flash-hardSPL (ran the file in that folder called KaiserCustomRUU) and it gets all the way to where it is updating the rom image to the kaiser-hardSPL version and it shows 0% on my phone and 0% on the PC and after about a minute or so it says ERROR [262] : UPDATE ERROR ... it instructs me to remove my battery for 3 seconds, put it back in and try again.
I've done this twice now and keep getting the same error -- any ideas on what I'm doing wrong?
Thank you once again.
Click to expand...
Click to collapse
Oh yes, that's true. I didn't realize I had to unlock my phone before I could start this process...I guess I confused it with CID unlocking or something.
I must have missed the part in the newbie FAQ about phones needing to be sim unlocked for all this stuff to work.
I guess I will have to get it unlocked first! Very much appreciate the prompt replies.
oh i just realized my SIM wasn't even in the phone while I was doing this (since I took it out during the white screen fix) -- would putting the SIM back in still create the same problem if my phone isn't unlocked?
Laurentius26 said:
The only thing I can think about is that your phone is simlocked.
Click to expand...
Click to collapse
You mean CID-locked, right?
Perhaps you could try another CustomRUU. Check this one http://forum.xda-developers.com/showthread.php?t=334890
Gas Addict said:
Oh yes, that's true. I didn't realize I had to unlock my phone before I could start this process...I guess I confused it with CID unlocking or something.
I must have missed the part in the newbie FAQ about phones needing to be sim unlocked for all this stuff to work.
I guess I will have to get it unlocked first! Very much appreciate the prompt replies.
Click to expand...
Click to collapse
No, a SIM-lock does not affect flashing.
So you ran JumpSPL from your phone, saw USB displayed on the screen, unplugged the usb cable, replaced it and then ran the hardspl provided from the thread I linked you to? There is no soft resetting going on between seeing USB on the screen and initiating the hardspl flash.
arexben said:
So you ran JumpSPL from your phone, saw USB displayed on the screen, unplugged the usb cable, replaced it and then ran the hardspl provided from the thread I linked you to? There is no soft resetting going on between seeing USB on the screen and initiating the hardspl flash.
Click to expand...
Click to collapse
Hi arexben,
I actually was an idiot and soft reset after unplugging and then plugging in the USB and not seeing any change on the screen.
Now if I put JumpSPL on my PDA and try to run it, it won't run saying it can't be opened because its either not signed w/ a trusted certificate or one of its components cannot be found.
Thank you so much for everyone trying to help me ... so to clarify, my phone has not been unlocked from AT&T and I am assuming I should still be able to get this stuff working.
Thanks again!
Gas Addict said:
Hi arexben,
I actually was an idiot and soft reset after unplugging and then plugging in the USB and not seeing any change on the screen.
Now if I put JumpSPL on my PDA and try to run it, it won't run saying it can't be opened because its either not signed w/ a trusted certificate or one of its components cannot be found.
Thank you so much for everyone trying to help me ... so to clarify, my phone has not been unlocked from AT&T and I am assuming I should still be able to get this stuff working.
Thanks again!
Click to expand...
Click to collapse
Not sure, but try to install the sdkcerts first.
Download them here: http://www.cinetsystems.com/xda/Kaiser Cab Collections/SdkCerts.cab
bmueller77 said:
Not sure, but try to install the sdkcerts first.
Download them here: http://www.cinetsystems.com/xda/Kaiser Cab Collections/SdkCerts.cab
Click to expand...
Click to collapse
Installed the SdkCerts then tried running JumpSPL off the phone still can't run that program.
Any other ideas guys?
Thank you again!
Hello to all, I am a noob here and have tried to adhere to all of the demands to do research and not post ?'s, but I am at a wall.
I have a Tilt and I ran the sim unlock and I was using the Sleuth 3.0 on it. Everything was working fine. I added the Iunlock cab and it worked fine as well. I then tried to install the icontacts, but i would have to go to program files and icontacts file in order to use I contacts. Well, wanna be innovative me thinks to try and move that file so it would replace something. I copied it to the windows appbuttons folder and deleted the regular contacts and nothing happened, then I put it in the start up folder and no luck, then I simply copied it to the windows folder not at the bottom where all of the extra files are. After that I tried to reset it and now all that I get is the bootloader screen. it reads as follows:
KAIS1*0 MFG
SPL-1.0.Olipof
CPLD-8
At the bottom, it shows either USB or Serial depending on if the usb is plugges up.
I tried running the sim unlock again and the dutty rom and both load to 100% but it goes back to the same screen. Any help would be greatly appreciated. Please help and thank you so much.
barrnunn said:
Hello to all, I am a noob here and have tried to adhere to all of the demands to do research and not post ?'s, but I am at a wall.
I have a Tilt and I ran the sim unlock and I was using the Sleuth 3.0 on it. Everything was working fine. I added the Iunlock cab and it worked fine as well. I then tried to install the icontacts, but i would have to go to program files and icontacts file in order to use I contacts. Well, wanna be innovative me thinks to try and move that file so it would replace something. I copied it to the windows appbuttons folder and deleted the regular contacts and nothing happened, then I put it in the start up folder and no luck, then I simply copied it to the windows folder not at the bottom where all of the extra files are. After that I tried to reset it and now all that I get is the bootloader screen. it reads as follows:
KAIS1*0 MFG
SPL-1.0.Olipof
CPLD-8
At the bottom, it shows either USB or Serial depending on if the usb is plugges up.
I tried running the sim unlock again and the dutty rom and both load to 100% but it goes back to the same screen. Any help would be greatly appreciated. Please help and thank you so much.
Click to expand...
Click to collapse
You could hard reset if you altered something in WM to cause it not to boot...hopefully
I tried the hard reset and same thing I flashes for a very split second loading and then goes back to the screen.
Hard reset is both item buttons above IE and Mail with soft reset correct?
barrnunn said:
I tried the hard reset and same thing I flashes for a very split second loading and then goes back to the screen.
Hard reset is both item buttons above IE and Mail with soft reset correct?
Click to expand...
Click to collapse
Yeah and then you press send...
- well you could try go into the bootloader and flash an OEM original ROM on i do not believe that doing this would brick your kaiser.
zeezee said:
You could hard reset if you altered something in WM to cause it not to boot...hopefully
Click to expand...
Click to collapse
In case u dont know how to do it:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Or else search for MTTY. That helped a lot of ppl who got stuck in boot loader.
barrnunn said:
I tried the hard reset and same thing I flashes for a very split second loading and then goes back to the screen.
Hard reset is both item buttons above IE and Mail with soft reset correct?
Click to expand...
Click to collapse
U need to hold the stylus in the hole longer, untl a message pops up on the page.
If it does not hardreset or help u, do what zeezee told u - flash a new rom.
OK, thank you all for you diligent assistance. I have tried the hard reset and it does the same thing...goes to black for about 2 seconds, then for a very split second goes to a grey screen and flashes loading then back to the bootloader.
I will try a search for the people stuck in bootloader and try flashing a OEM ROM, I will let you know how it goes. Thanks again.
barrnunn said:
OK, thank you all for you diligent assistance. I have tried the hard reset and it does the same thing...goes to black for about 2 seconds, then for a very split second goes to a grey screen and flashes loading then back to the bootloader.
I will try a search for the people stuck in bootloader and try flashing a OEM ROM, I will let you know how it goes. Thanks again.
Click to expand...
Click to collapse
Here is a list of OEM ROMs:http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
I do not see any Mods here around or somebody yelling (search button is your friend,search the wiki everything is there, bla bla)To having a woman at home change everything.. Thanks..!
Before you try the dangerous MTTY method, you could try refresh a oem rom w/ the SD method
ok, I am flashing an OEM rom now, but what does it mean to do it with the sd method?
barrnunn said:
ok, I am flashing an OEM rom now, but what does it mean to do it with the sd method?
Click to expand...
Click to collapse
From youre sd card (memorycard), look it up in wiki. Moust of us flashaholics keeps oure rom on oure memorycard and just rename the rom/bootsplash/radio or whateva and place it in root then activate bootloader -> flash. This is an alternative for not using usb cable, pc and active sync
http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash
ok thanks, but am i correct in understanding that to do that I have to use the phone to access the mem card?
My issue is that the only screen I get is bootloader, no nothing else. I can't even turn it off. I can take the battery out to get a black screen, but any action to try something will take it back to the bootloader screen. But for some reason, it still allows me to flash the ROM, I think. I flash it on my pc and then my phone goes to the grey screen where it shows the % of progress. It reaches 100% and the pc tells me to click finished and I do then it goes back to the bootloader.
barrnunn said:
ok thanks, but am i correct in understanding that to do that I have to use the phone to access the mem card?
My issue is that the only screen I get is bootloader, no nothing else. I can't even turn it off. I can take the battery out to get a black screen, but any action to try something will take it back to the bootloader screen. But for some reason, it still allows me to flash the ROM, I think. I flash it on my pc and then my phone goes to the grey screen where it shows the % of progress. It reaches 100% and the pc tells me to click finished and I do then it goes back to the bootloader.
Click to expand...
Click to collapse
put the rom image file on storage card and than power on phone in bootloader. the process will start automatically.
thesire said:
put the rom image file on storage card and than power on phone in bootloader. the process will start automatically.
Click to expand...
Click to collapse
yes, just use a card adapter or something to acess youre card (if you cant connect via active sync) then copy the rom over and follow the steps in wiki. Beeing stuck in the bootloader some times aint the worse place to be stuck
korakesion said:
I do not see any Mods here around or somebody yelling (search button is your friend,search the wiki everything is there, bla bla)To having a woman at home change everything.. Thanks..!
Click to expand...
Click to collapse
I don't mean to argue with you here and you are right about research threads, but honestly it's easy to get caught up in frustration with the amount of information. Some authors are good at documentation and some skip steps along the way or extra links are in the threads.
I just switched over to Gullum's Diamond Rom and was I nervous upgrading "Yes" and did I read much that I could "Yes". Were the instructions to HardSPL, Jump were a little unclear "Yes" so people asking questions are legit to a degree but we shouldn't also be eagar to pounce on...
tvos
tvos said:
I don't mean to argue with you here and you are right about research threads, but honestly it's easy to get caught up in frustration with the amount of information. Some authors are good at documentation and some skip steps along the way or extra links are in the threads.
I just switched over to Gullum's Diamond Rom and was I nervous upgrading "Yes" and did I read much that I could "Yes". Were the instructions to HardSPL, Jump were a little unclear "Yes" so people asking questions are legit to a degree but we shouldn't also be eagar to pounce on...
tvos
Click to expand...
Click to collapse
I agree with some of your remarks. Yes myself and others have jumped down people's throats yelling, "Search." One thing you have to remember though this is a developers forum, not a novice forum to help people making there phone look "cool."
Going into flashing / upgrading / modifying, you have to have a little bit of knowledge or time using Windows Mobile / Windows in General devices and machines.
Usually reading some background information can be a world a difference before jumping into this sort of thing.
I found the problem to stuck in bootloader. Thanks to all who have posted threads.
Originally Posted by GSLEON3
Many of you have noticed that in the past I spent a great deal of time helping people with Kaiser issues. Many of you have asked for help in the last few days & are probably feeling ignored. I am just unavailable at this time. My little sister had a Kidney Transplant operation on June 30th, 2008 & I have been spending much time traveling back & forth between my home in California & her's in Arizona. There were a few complications, but she is now doing well & recovering. I will be spending this weekend & most of next week helping to care for her & will be unavailable still for the next ten days or so.
There are many capable people in the Kaiser forum that will help. If you have hit a wall, be patient & I will begin to answer my PM's in the order they were recieved within the next week. Sorry I can't be of more help at the moment, but family comes first as I'm sure you understand.
Thanks,
GSLEON3
Aboslutely man. You go take care of your family. I will pray for God to guide you all through this trying time.
On the Kaiser note, I found after further studying of some threads, a solution to my issue where I was stuck in bootloader. I think this will apply to anyone that is stuck in bootloader with the usb/serial showing at the bottom and when they try to flash a new rom is goes to 100%, but the are still stuck on the boot screen.
After reading more threads, it appeared that there was some sort of disconnect between the usb and the phone. Since my PC was stating that it was successfully completing the flash, that shows that it was not getting any type of error from the phone. After reading a thread I simply blew in my tilt usb port and used my stylus to try to straighten it out as one of your post state to ensure the usb connection is straightor it may give mtty an issue.
Once I messed with my USB port, the phone came back to life and everything was fine. Everything was rebooted and all my info was lost however. I was even able to successfully flash a new ROM.
In closing, if anyone is stuck in bootloader mode and their flash goes to 100% and doesn't fix their issue, tell them to clean and straighten their usb connection.
Solution for Those Stuck in Bootloader
Here is the link to the initial thread I started for my issue
http://forum.xda-developers.com/showthread.php?t=406221
I found after further studying of some threads, a solution to my issue where I was stuck in bootloader. I think this will apply to anyone that is stuck in bootloader with the usb/serial showing at the bottom and when they try to flash a new rom is goes to 100%, but the are still stuck on the boot screen.
After reading more threads, it appeared that there was some sort of disconnect between the usb and the phone. Since my PC was stating that it was successfully completing the flash, that shows that it was not getting any type of error from the phone. After reading a thread I simply blew in my tilt usb port and used my stylus to try to straighten it out as one of your post state to ensure the usb connection is straightor it may give mtty an issue.
Once I messed with my USB port, the phone came back to life and everything was fine. Everything was rebooted and all my info was lost however. I was even able to successfully flash a new ROM.
In closing, if anyone is stuck in bootloader mode and their flash goes to 100% and doesn't fix their issue, tell them to clean and straighten their usb connection.
I currently have the old 02 XDA and a while ago i did a radio update (?) and had the problem where it wouldnt update.
After rectifying what had happened the handset went back to normal, except that when i use the boot loader it tells me the GSM is off and when it tries to turn it on - it fails. The main problem i have is that i cannot for the life of me access the start menu - there is nothing on the main taskbar!
I can't tap anything bear in mind, because i cannot run the boot set-up.
Thanks in advance for any help
Anyone, please?
Or at least, could someone tell me if there is a shortcut key that can be used to access the screen alignment.?
Welcome to the forum
Please have a look in the Wiki here:
http://wiki.xda-developers.com/
Not sure what is your model, but select yours and have a read
Perhaps a reflash could help
Good luck,
http://wiki.xda-developers.com/index.php?pagename=HTC_Wallaby
Ok, there is my model...
I just cant seem to do anything on it - if i can just get a way to re-align the screen without having to tap then all will be ok and i can sort out the rest from there.
Please help!
long story short. i bought a locked g1. did the factory reset. dont have data but have a sim card. i was trying to do the activation over wifi.
when i press enter type reboot and press enter nothing happens.
every time i downgrade to rc29 everything goes smoothly, until its time to reset it after its complete. I restart it and it always get stuck at the screen with the andriod and it says andriod beside it flashing from time to time.
the only way around this is to next install cupcake which brings me back to the activations screen. but i still cant reboot by typing in reboot
its not taking any commands so i cant never get adb to work.
from my searches I'm the only that has this problem right after downgrading to rc29
any info/ help would be greatly appreciated
Do you mean the screen that says "touch the android to continue"? You might want to do what it says.
Oh, and you might want to also do what this FORUM says... post your questions in the QUESTIONS section.
It appears to me that there is nothing wrong except that you aren't willing to follow the instructions.
prelude91sit said:
long story short. i bought a locked g1. did the factory reset. dont have data but have a sim card. i was trying to do the activation over wifi.
when i press enter type reboot and press enter nothing happens.
every time i downgrade to rc29 everything goes smoothly, until its time to reset it after its complete. I restart it and it always get stuck at the screen with the andriod and it says andriod beside it.
the only way around this is to next install cupcake which brings me back to the activations screen. but i still cant reboot by typing in reboot
its not taking any commands so i cant never get adb to work.
from my searches I'm the only that has this problem right after downgrading to rc29
any info/ help would be greatly appreciated
Click to expand...
Click to collapse
If thats what i meant thats what I would have typed.
lbcoder said:
Do you mean the screen that says "touch the android to continue"? You might want to do what it says.
Oh, and you might want to also do what this FORUM says... post your questions in the QUESTIONS section.
It appears to me that there is nothing wrong except that you aren't willing to follow the instructions blah blah blah.
Click to expand...
Click to collapse
I only found one other person that was having this problem after loading dreaing.nbh and no solution was posted other than he might need to upgrade to rc33
prelude91sit said:
I only found one other person that was having this problem after loading dreaing.nbh and no solution was posted other than he might need to upgrade to rc33
Click to expand...
Click to collapse
You mean you found one other person who couldn't follow directions. You won't get anywhere by sassing lbcoder.
Start by posting the question in the right subforum, then follow the directions on the CM wiki.
Ive tried everything. I followed the directions to the T. Its not rocket science. I done everything over 10 times and still hangs at the flashing andriod boot screen. Never goes to the activation screen. I can do the <enter>reboot<enter> and that works. also was able to sucessfully connect to adb for the first. when i tried it at this screen. i get an error when trying to pull up the wifi settings cause my phone itsnt functioning properly.
anybody???
Maybe try something else like RC7. When I was rooting my G1 I followed a tutorial which was recommending RC7 and RC29 to do telnet stuff. RC7 wasn't working for me so I tried RC29 and everything was OK. Maybe it's the same for you, but in reversed order .
i well try it asap. the only reason i havent tried it yet cause im in the u.s. i didnt think i could use it.
got a not allowed. its funny cause when i first tried it i think the image was messed up. it said not found or something. try it a couple times didnt work stopped and let it power up normal and it worked. i was excited. i was able to register it over wifi and everything.. turned it off swiped sim cards ect. then it just got stuck back on the flashing andriod screen. wtf? so im starting all over again it hangs again at that screen as usual
i would try flashing RC33 first...
I would try posting this in the proper forum. It seems to me you asked a question, however you posted in the Android Development forum, see where I'm going with this?
Ok, so this is my first ever forum post and I have resorted to this after hours of searching for a fix.
So let's get straight to the point. After changing my drag password thingy, I forgot it. Numerous attempts later to unlock the password, I found myself on this 'Sign in with your google account' screen of doom.
My phone runs 4.0 ice-cream sandwich.
My problems are:
WiFi is disabled
USB-Debugging is disabled
Things I've already tried:
Factory reset on bootloader - the HTC screen just pops up then it freezes on it.
Recovery on bootloader - the HTC screen just pops up then it freezes on it.
Calling the phone with another phone and trying to drag the notification bar down/ button mashing - nothing happens.
Using ADB to unlock it - I can't because USB-Debugging is disabled.
Various fixes that use WiFi - WiFi is disabled.
Please, please, please help me! My phone has been locked like this for a month now. I've only had the phone for 6 months and I use(d) it very regularly. I will appreciate all the help I can get. Thanks!!
Mr.Stick said:
Ok, so this is my first ever forum post and I have resorted to this after hours of searching for a fix.
So let's get straight to the point. After changing my drag password thingy, I forgot it. Numerous attempts later to unlock the password, I found myself on this 'Sign in with your google account' screen of doom.
My phone runs 4.0 ice-cream sandwich.
My problems are:
WiFi is disabled
USB-Debugging is disabled
Things I've already tried:
Factory reset on bootloader - the HTC screen just pops up then it freezes on it.
Recovery on bootloader - the HTC screen just pops up then it freezes on it.
Calling the phone with another phone and trying to drag the notification bar down/ button mashing - nothing happens.
Using ADB to unlock it - I can't because USB-Debugging is disabled.
Various fixes that use WiFi - WiFi is disabled.
Please, please, please help me! My phone has been locked like this for a month now. I've only had the phone for 6 months and I use(d) it very regularly. I will appreciate all the help I can get. Thanks!!
Click to expand...
Click to collapse
Firstly - this is a QUESTION and should be in the Q&A forum
Secondly - you know that as you have already asked the question in the Q&A forum and someone attempted to help you, so why would you want to open a new thread?
SimonTS said:
Firstly - this is a QUESTION and should be in the Q&A forum
Secondly - you know that as you have already asked the question in the Q&A forum and someone attempted to help you, so why would you want to open a new thread?
Click to expand...
Click to collapse
Haha i thought id seen this post before.. thought i was going mad :sly:
If your boot loader is unlocked you can install 4xt recovery and install another ROM.
Factory reset doesn't help - that's strange but I have never tested it before :laugh: