Database Info

Activesync Network sharing

Recently i started to use activesync to share internet connection over BT with my pc, it works fine, though i have two questions:
first one is the synchronisation wizard that pops up immediatly after my wizard connects. i've noticed that i need to close it for net link to be established. I'd like to disable it somehow, so that i don't need to get anywhere close to my PC to connect, it's quite annoying. I even tried to capture the AS window with my own software to close it, but was unable to recognize it properly. any chance to do it?
other thing is, when i use usb to sync with AS, i am able to acces lan resources with total commander. I was hoping i can do the same with BT connection, but so far i was unable to locate the proper solution for this idea... would be cool if i had it working, i used to do it over wifi, but i prefer using BT now, help anyone...
thanks in advance guys

Still nothing, i'm stuck with this problem, would be grateful for any solution

Life can be so cruel...
So just for your information guys, problem is solved. though im rather mad about it, as it happened an ugly way;]
so i;ve finally managed to create an application that captures proper Activesync windows and closes synchronisation wizard, so that my xda establishes connection without me even touching desktop pc. thats fine. i just couldn't remember where in registry to place my app so that it opens when i connect (i don't like the idea of my program just sitting in windows tray all the time), the idea is cool, it's almost finished, i go google. "activesync registry"
first result is this...
http://www.pocketpcfaq.com/applications/undocumentedactivesync.htm
you can't imagine how angry i get... ;]
anyway, there's no need for my program to exist, i just change/add one registry value, thats it...
just why couldn't i find it for over a month, and i did right after i found another way to solve it??? life sucks ;]

FIXED - ActiveSync not working via USB on WM6 Wizards

This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.

hi,
i have tried it, but it doesnt work. do you have made spacially things to get i work ?

Not really. Installed ActiveSyncMode. Ran it and selected USB mode instead of RNDIS mode. This fixed the problem for me with a WM6 upgraded 8125 and 2 other friends with Original ROM 8125 and Original ROM MDA.

i unchecked "Enable advanced network functionality" in USB to PC settings on my phone and got activesync to work for me when i was having trouble

us687008 said:
This is to everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
Hi! I've got the same problem, and i was solutionated with reinstall the activesync. So go to microsoft site, and download the activesync 4.5 again. After that try to sync your pda, and maybe its solve.

THANKS VERY MUCH
YOU SOLVE GREAT PROBLEM

us687008 said:
This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
THANK YOU!!! What exactly does this cab do to fix the problem?

us687008 said:
This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
I had to reinstall WM6 and now ActiveSyncMode.sa.CAB no longer fixes my connectivity problem. I'm getting fed up with WM6.

I have tried everything else and will now try this. I did not realize that this was such a problem, until I started researching to solve my own problem. So good luck to me.
Fixed it with my own build. So far. I still have to try and sync with another computer. That is where the biggest problem has been for me, is syncing with two computers.

Under Vista 64, I normally have McAfee firewall at the highest setting and also have Windows Firewall on.
At first, after upgrading to WM6, I could not sync. I then found some registry fix procedures and tried them but it did not work. I then installed ActiveSyncMode.sa.cab and it allowed me to sync. Maybe that combined with the prior registry fix might have allowed me to sync.
However, after I uninstalled WM6 and reinstalled it, I could not sync anymore. I installed ActiveSyncMode.sa.cab again, but it did not work this time. I did not try the registry fix this time because I can't find the procedures, which I originally found online. I can't remember how to find them again.
I then turned off both Windows Firewall and McAfee firewall and I was able to sync again.
I then reinstalled Windows Mobile Device Center while having the firewalls off, hoping it would allow the installations to complete properly.
I then turned on Windows Firewall but it was still blocking the sync.
I restored Windows Firewall back to default and it made it worse. I then had to reinstall Windows Mobile Device Center and was able to sync again with Windows Firewall on. Often I would have to disconnect the cradle to establish reconnection.
Next, I needed to figure out how to turn on McAfee firewall and allow it to sync.
I then contacted McAfee and they told me to exclude Universal Plug and Play (UPNP) port 5000 and Windows File Sharing (NETBIOS) port 137-139. It didn't work exactly until I lowered the firewall one level. What all this networking stuff means, I don't know. I'll have to do more searches on them.
I now need to figure out how to put McAfee firewall back at maximum level while still allowing me to sync.

a_ok2me said:
Under Vista 64, I normally have McAfee firewall at the highest setting and also have Windows Firewall on.
At first, after upgrading to WM6, I could not sync. I then found some registry fix procedures and tried them but it did not work. I then installed ActiveSyncMode.sa.cab and it allowed me to sync. Maybe that combined with the prior registry fix might have allowed me to sync.
However, after I uninstalled WM6 and reinstalled it, I could not sync anymore. I installed ActiveSyncMode.sa.cab again, but it did not work this time. I did not try the registry fix this time because I can't find the procedures, which I originally found online. I can't remember how to find them again.
I then turned off both Windows Firewall and McAfee firewall and I was able to sync again.
I then reinstalled Windows Mobile Device Center while having the firewalls off, hoping it would allow the installations to complete properly.
I then turned on Windows Firewall but it was still blocking the sync.
I restored Windows Firewall back to default and it made it worse. I then had to reinstall Windows Mobile Device Center and was able to sync again with Windows Firewall on. Often I would have to disconnect the cradle to establish reconnection.
Next, I needed to figure out how to turn on McAfee firewall and allow it to sync.
I then contacted McAfee and they told me to exclude Universal Plug and Play (UPNP) port 5000 and Windows File Sharing (NETBIOS) port 137-139. It didn't work exactly until I lowered the firewall one level. What all this networking stuff means, I don't know. I'll have to do more searches on them.
I now need to figure out how to put McAfee firewall back at maximum level while still allowing me to sync.
Click to expand...
Click to collapse
After doing all the steps above, I found that all I needed to do was lower the McAfee firewall level one notch to be able to sync. However, I'm still going to figure out why I had previously been able to sync at the maximum security level. There must be some exclusion that got remove that I need to add again.

Activesync and HTC s620 issues.
This issues is driving me completely insane, So far this thread is about the only related info on the problem too. I find it hard to believe there aren’t more people out there with these issues, anyway here’s were I’m at:
Got a HTC s620 Smartphone from BT, Active sync simply didn’t work from day one and me being an IT support guy I haven’t been able to resist going back to the issue.
For over a week I have made pretty much no progress at all, I can’t find a activesyncmode.sa.cab file for my phone that works yet so got nowhere with that, the HTC website is about as useful as a chocolate fire guard.
The first leap of progress was spotting a trick on here of disabling the advanced network functionality on the phone its self.
It was baffling me at first why my computer was picking up the phone as if it was a network adapter. (And trust me I tried all sorts of in depth stuff down that avenue). It makes sense now though that the Smartphone can be setup to act as a network adapter/modem. Hence now I’ve disabled the advanced network functionality on my phone Active sync instantly make noises and hey presto ‘Connected’ and then a few moments later I’ve now got some other critical error
So my quest continues, but I will get to the bottom of this if it kills me!
So for the record, anyone with a HTC s620 Smartphone running Windows Mobile 6, before you do anything else do this:-
Start
Settings
6. Connections
7. More…
4. USB to PC
(Remove the bloody tick from box) Enable advanced network functionality
I will report back with my next hurdle…
OK, as much as I’d played around with my firewall it would turn out that this is the second culprit causing my problems. I tried installing Activesync on my Laptop and Desktop and had the same errors, however the only thing those to computer have in common is the Iolo System Shield installed. Last night to just ensure I wasn’t going mad, I tried it on my wife’s laptop and hey presto! It worked first time. So naturally, I’ve uninstalled the Iolo System Shield from my computer and bingo, worked straight away.
This is annoying however, because I did everything from the Microsoft Help setting up exceptions etc. in my firewall. But there you go.
In brief:
Check your device has the advanced network functionality disabled.
Uninstall your 3rd party firewall and test to pin point the cause, then you know what you’re dealing with.

Just a second thought of advice, one of the first things I tried was disabling the firewall, from my experience that wasn’t enough, it had to be uninstalled to get it to work. Before anyone else goes down the hair pulling road of trying anything and everything under the sun, uninstall your firewall/system guard software. At least if it works after that you know exactly what is causing the problem.
Then getting it to work with the firewall installed is something you can focus on possible in conjunction with the software vendor.

I fixed teh same problem by unchecking the advanced box but .....
after oving back to wm5, I cant connect as well. I look for the working solution from WM6, but I cant find the menue to disable the advance usb connection.
It looks like that is the problem to sync with vista 64
Hope somebody has a idea.
thx in advance

My USB connection to activesync stopped working. (although at my second pc it still works OK)
It works via InfraRed though!
I think this USB problem started when I was trying to connect via bluetooth.
Don't you just hate ActiveSync!?
Well, maybe the problem is with Windows XP... because it doesn't recognizes the PDA.
Anybodies help? Thanks in advance.

No file ActiveSyncMode.cab !
Help

No worries, new link:
http://www.pcdphones.com/downloads/ActiveSyncMode.sa.CAB
Also attached to be safe

would be a shame to let a useful thread go into some archive, so I'm resurrecting this oldie.
Also, I remedied this activesync issue with a more straigtforward fix. Fresh flash of 6.5. After deleting all the USB devices in the device mgr (didn't help), I saw there was a WM6.5 setting for default behavior on PC Connection (or something similar to that). Changed it from "setup" to "sync" & that silly white toggling screen went away and allowed a flash back to 6.1.

Active Sync

Hello.
I asked the forum search about it, but cant find really an helpful answer.
I do have strong problem with Active Sync. Sometimes it works, sometimes it doesnt. Sometimes, I got to install Active Sync new or drop out the device and add it new to get it done.
Button for fast data connection at the Touch Pro is enabled. Working with 4.5.0 and XP.
Can someone please get me a tip?

Hardware Problem?
I had the same problem with my TyTN II which is the reason I switched to Touch Pro.
The problem I could not synch was because of the MiniUSB connector. I had to change the main board twice. So now my wife owns the TyTN II

i solved that problem by changing another usb slot (it didn't work with USB from my monitor...)

Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.

drdurango said:
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
Click to expand...
Click to collapse
Have you disabled "advanced network functionality" in Settings>Connections>USB to PC ?

also try reinstalling active sync again...

@Wonkotehsame:
Yes, I disabled this function.
@ yahu:
So I did. Not just one time, many times. Always after reinstalling, it workes. Some time later, I am loosing connection.
Also, if I try to copy larger files like GPS software with appr. 1,4 Gb the transfer to the Memory card stoppes with the failure message: no such file found.
Can this be something along with the Active Sync problem?

I too have problems with this. ActiveSync says phone is set up to sync with a different computer, but it's not.

Still nobody any hint for this problem?

My problem is a little bit diferent...
My vista won't sync with my Artemis, but it syncs with my Glofiish M700..
If i change the PC (OS XP x64), the artemis syncs.....
So, my Vista Notebook is angry with my Artemis... neither USB/BT sync can be done...

Nice to hear that a lot of people have similar probs ;-)
What I have done now, deleted all of my connetions features/partnerships and made all new.
For now (maybe until Monday...) it works, but now I dont get a folder on the desktop of my mobile device. Is this an optional setting? Can someone tell my how to do?

I dont believe that NOBODY has an help for this problem.
As of today, no Active Sync in any ways is possible with my phone. Even not if I make a new installation.
Also; I made sure that all Anti Virus and Firewalls do allow all 3 Active Sync Files.
What can I do else???

Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?

drdurango said:
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
Click to expand...
Click to collapse
Looks like you are on your way to finding the root cause. I would try the same computer but a different user to see if it is related to the user setting.

This is what I have done last night. 2nd user, installed OL new and also Active Sync.
Nothing. Same problems.
I restarted the Desktop AND the device several times.
Nothing.
But, when I came this morning, it worked the first time.
The second it failed. I will go and purchase a new Desktop for the thanks of Mr. Microsoft!

has anyone found a real solution for this problem?? mmy computer recognizes the phone a a disk drive bt active sync does nothing. any help would be greatly apprecated

I'm getting this too. Sometimes ActiveSync works, sometimes it doesn't. I can't figure out what causes it to work and not work...

Theres only two possible solutions I know of from all I've ever heard of the problem:
1. Settings-->Connections-->USB to PC. Also, I know the prompt asking you if you would like to use as a disk drive comes up if you've set your phone to be read as an sd card reader. If the pop up annoys you, try removing the SD card and trying again.
2. Hard reset.
Sorry if it doesn't seem favorable to you guys.

RapiMgr hanging in Windows 7

I had been using Windows 7 for weeks withno issue (official beta, build 7000), then suddenly about a week ago I started having strange device issue. It started takin forever to go to sleep and when I got home and plugged in my usb hub or any usb devices directly in they would not be acknowledged at all. I think I have found the culprit. In the event viewer I am getting tons of errors from RapiMgr service not responding. Also, I cannot stop the service or terminate the process (WmdHost.exe) no matter how I try. I will restart and turn that service to manual startup now and see if I still get this problem. It doesnt happen all the time, but now that I think about it it may correspond with times where active sync wont connect for some reason (ie everything working fine but no active sync connection -> put it to sleep to go to class (takes forever) -> get home and plug in usb hub and nothing connects).
Anybody else have this issue? Was there a recent update to WMDC?

I'm also using the official Win7 beta, and I had a problem with WMDC when I first installed it. It wouldn't acknowledge that I plugged in my phone. I got really frustrated looking for a solution, and after a lot of cursing, investigating, and more cursing, I finally just uninstalled it and installed it again.
And if you can't uninstall it because you can't stop the process, try booting into safe-mode if you haven't already. If you don't know how to boot into safe-mode, hit F8 while booting Windows to have boot options come up, then select safe-mode. I haven't tried with Windows 7 as I haven't needed to, but in previous versions of Windows, I believe that was the key to press. Hope that solves the problem,
Dave

DaveTheTytnIIGuy said:
I'm also using the official Win7 beta, and I had a problem with WMDC when I first installed it. It wouldn't acknowledge that I plugged in my phone. I got really frustrated looking for a solution, and after a lot of cursing, investigating, and more cursing, I finally just uninstalled it and installed it again.
And if you can't uninstall it because you can't stop the process, try booting into safe-mode if you haven't already. If you don't know how to boot into safe-mode, hit F8 while booting Windows to have boot options come up, then select safe-mode. I haven't tried with Windows 7 as I haven't needed to, but in previous versions of Windows, I believe that was the key to press. Hope that solves the problem,
Dave
Click to expand...
Click to collapse
Thanks for the suggestions. There was no need to boot into safe mode as the process doesn't hang right after a reboot. It seemed to only start after running for a while. After rebooting I just uninstalled WMDC. I will see if the problem happens again but I am 90% sure WMDC is the problem. The question is just why would RapiMgr just start hanging all the time last week and continue to do so after a reformat? Perhaps the ROM that I am now running confuses activesync enough to cause it to freeze the process on my computer? I can't remember when exactly I started using this ROM. Hmmm. If I dont get the problem for a few days I think I will reinstall WMDC and then disable advanced network functionality in USB to PC on the device.
BTW, when I reformatted I decided to go to W7 build 7068. Not really any noticeable changes I dont think, but a nice new login screen background. MS did a very nice job with W7. So polished looking and a joy to use.

[Q] Screen On with "USB Device Disconnected"

My Galaxy Tab 7.7 turns on every few minutes and displays a message for a moment in the lower right corner. The message is "USB Device Disconnected".
The device is not connected to any USB device.
This has been happening for many weeks now.
I've tried to turn the USB Debug option on but that didn't change anything.
I have not rooted the device.
I have not flashed the device.
I am running only stock applications from the market.
Does anyone else have this issue?
It's maddening because the device constantly turns itself on. At night I either remove it from my bedroom (the display lights up the room when it comes on) or turn the device upside down on the table so I can't see it when it comes on.

yes, i have the same issue
no idea what the reason is

Same issue.

One Added Note
One item to add...
It appears that if the unit is charging it does not have this problem. This makes logical sense as the USB is connected, albeit to the wall outlet.
I'm going to wait until ICS - which is due here in Thailand at the end of this month. If that doesn't fix it I will contact Samsung.
Living here in Asia makes taking things back for repair very difficult as the many small but authorized vendors aren't set up for this, the language barrier adds heavily to the issue, and finding an English speaking official Samsung office is quite difficult.
I will monitor the forum to see if a fix arrives before my software update.
Thanks everyone!

Same problem here. When this happen for me the mobile network disconnects, I am thinking that it may be some problem with the mobile network card...
When connected to wifi this is not visible although i might get the usb message.
But on 3g i loose all connection sometimes only for a second but sometimes for up to a couple of minutes...
Sent from my XT910 using Tapatalk

Update
I wanted to add some more information...
I happened to remove my carrier's SIM a week ago and the "USB device disconnect" error continues at the same rate.
I guess my next question is how do you contact Samsung support?
Do they have a Tablet support phone number?
I don't care which country the support line is located within, as long as it's English-speaker focused.

bump
very annoying to lose mobile network all the time

I changed Galaxy Tab 7.7 (3G Version) three times, all three tablets had same problem.... any idea to fix it?

I think the problem gets worse if the tablets not been rebooted for a while.
But after reboot I think mine is a bit more stable.
How is it for the rest of you?
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
I also find it weird that you have the same problem with three tablets, but at the same time it seems that very few of us are affected???

I called Samsung and they said they never have complaints on this issue.... anyway, i got three devices from different stores have the same problem.. I think the issue is the rom. That problem hopefully can be solved after ICS upgrade...

Same problem; not so often but it happens once in a while.
I don't know if it is causing the instability that I have noticed with this device but it is kinda weird.

Do you have micro SD card plugged into the device? I read some other forums and some people removed the micro SD card, the issue resolved afterward.
I just removed the micro SD card, I will let you guys know if the issue can be fixed or not soon...
Sent from my GT-P6800 using XDA

Solved
I think all this happens because of Kies software. It's a monster, I will never use it any more. Even uninstlling may not help. Better use MobilEdit instead.
Anyway, I found solution in registry. So, try this:
Before starting, disconnect all usb devices from PC
1. Open Windows registry editor
2. Open key HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB
3. Press CTRL+F and search in data value your device name (egz. Samsung)
4. Delete all key branches with name started: Vid_*** where your device will be found (You may have to enable permissions first).
Reconnect device. That's all

i have the same 'problem' but..., never used Kies software

Anyway, solution is in the registry. Evidently some usb drivers are conflicting.
Deleting those Vid_*** keys simply resets usb drivers on particular port.
You can check your phone on another computer without driver

Vytookas said:
I think all this happens because of Kies software. It's a monster, I will never use it any more. Even uninstlling may not help. Better use MobilEdit instead.
Anyway, I found solution in registry. So, try this:
Before starting, disconnect all usb devices from PC
1. Open Windows registry editor
2. Open key HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\USB
3. Press CTRL+F and search in data value your device name (egz. Samsung)
4. Delete all key branches with name started: Vid_*** where your device will be found (You may have to enable permissions first).
Reconnect device. That's all
Click to expand...
Click to collapse
I don't see how this has anything to do with the problem.
The USB device issue is happening on the tablet, not on the PC. How does removing USB drivers from my PC fix the tablet issue?

omarrabbat said:
I don't see how this has anything to do with the problem.
The USB device issue is happening on the tablet, not on the PC. How does removing USB drivers from my PC fix the tablet issue?
Click to expand...
Click to collapse
Sorry, I didn't notice, that device is disconnected

Same problem with GSM version. Could someone try log at the logs when/after it have happend? Dmesg and logcat. Will also try to do it myself.

same issue here. Never used kies before. I'm not sure if it has something to do with interfering gadgets near the tab.

Strange thing some (or most) people dont notice that bug(?). I tried several 7.7's now and can confirm that this looks like rom issue as every 7.7 has that problem. It really annoys me, escpecially combined with the battery status screen-on bug. When battery is lower than 10% screen turns on like every 2 minutes or so... Good thing to save remaining battery
Oh and I never used Kies too. Didn't even install it yet.