Related
Greetings,
I just upgraded to the 2.02.00 ROM last night but still have the occassional lockups. I need to do a soft reboot to get the phone to respond. I believe when it locks up, the radio is still running since I see the blinking Green LED for the GSM. I have to switch off the POWER MANAGEMENT option of "Turn off in x min in not used" for battery power to be able to use the device for calls. The only level of battery saving I am stuck with now is the Backlight auto-off and the beam settings.
Is this something others are having as well or are any applications the culprit?
Thanks in advance for your assistance.
Regards
BHAMEED
------------------------------------------------------------------------
I-Mate JASJAR
--------------
Windiws Mobile 6 (CROSSBOW)Jwright
OS 5.2.318 (Build 15341.0.0.0) AKU 0.0
CE ROM Version : (2.02.00 WWE)
RADIO Version : 1.13.00
ExtROM Version : (2.03.05 WWE) UNLOCKED
Bootloader Version : ver 2.01
Try the power button
All buttons..including the power button...no response.
try holding down the power button
or setting the backlight to atleast one notch.
Urm... uh... ah.... eeee... aaaaaaaaaaaahhhhhhhhhh.
I can confirm this behavior on my MDA Pro (G3).
All ROM versions the same like Bhameed's on my MDA, ...except bootloader of course.
Anyone else noticed this on 2.02.00?
Hold on, can you guys be more specific with this? Are you absolutely sure it doesn't come back on when you PRESS AND HOLD the power button??? Really sorry if I sound like I'm being pedantic, but just from what you've written it sounds like you don't know how to turn on the phone???
hahahaHAHAHA!!! awesome reply spyder
ok, yeah i was thinking this is an issue of not being able to turn on your phone.
yeah what's going on that was different from before?
There have been only few moments where you think "Surely not"... I hate those moments, I'm just hoping this isn't one of them! If it is a genuine problem it's pretty serious and needs to be addressed, but if not.... well, I don't think I should say much more
Please please please say this is all a big joke. I'm tired, please excuse me.
I confirm this behaviour!
And more!
My Qtek freezes... freezes... and then PUFFF. Dead.
I wait some minutes (30 minutes) and I can turn it on again.
I'll send it to qtek.
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
SpyderTracks said:
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
Click to expand...
Click to collapse
Mine freezes everywhere. Bootscreen, Pin code menu (when u type your pin). It depends.
then pda doesn't turn on.
Many problems.
Just go to the assistance. :\
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
aniel1 said:
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
Click to expand...
Click to collapse
Again, I don't have this problem for some reason... I get very few freezes at all.
I think we're getting away from the original point of the post though... and normal freezing is well documented in most OS threads with means to prevent it.
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Bhameed said:
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Click to expand...
Click to collapse
And then you don't have other problems? Like freezes?
EDIT: I flash the original rom but the problem still here
I wonder if this could be a memory leak like someone suggested.... I'm sorry guys, I haven't experienced this problem, and I haven't seen any posts about it until this thread, is there any chance you guys with this issue can keep an eye over your memory status over say a couple of days to see if there's a leek and keep us posted? Once we find out what the problem is it should make a solution easier.
I experienced this problem as well using a cooked WM5 ROM on my HERM200 the only fix I found was migrating to another ROM. I'm currently using CUSTEL_Cing_v1.3, the battery life sucks but I love WM6, it is so much faster, I'm still tweaking and trying to resolve some other issues but other than that I am quite happy with it.
If you are experiencing the lockup I would suggest moving to another ROM as an option, that worked for me. Although a clean install usually fixes a lot of problems.
I'm using Faria's (at the time) final ROM, that I cooked with this instructions. I'm running into a strange problem, and wanted to see if anyone else was having the same problem. When i go to put my wizard into sleep mode, just after I hit the power button, it comes back on. I then have to hit the power button again for it to sleep. Anyone else having this problem?
This is a known issue for WM6 - I've read about this in several threads. If I remember correctly, it's related to having a password and enabling the screen power down settings. Try searching for the threads for more detailed info.
Ever since upgrading to WM6, my Wizard won't stay off. I can't keep it to stay in standby. Someone mentioned to me once that this was a known issue, and said to search the threads. I haven't been able to find anything about this. Does anyone know about this, and how to fix it?
Thanks.
Try disabling the screen auto-off settings and/or removing your password.
Thanks for the suggestion, but they didn't work....Device will still power us with backlight off, and buttons disabled. Only thing that works is the touchscreen. I press the standby button, and the backlight comes on with buttons active....weird.
Theres is a combination of settings that causes that... let me see if can find the post so you can tweak it out and that doesnt happend anymore. Its a very known bug.
WizardGuy said:
Ever since upgrading to WM6, my Wizard won't stay off. I can't keep it to stay in standby. Someone mentioned to me once that this was a known issue, and said to search the threads. I haven't been able to find anything about this. Does anyone know about this, and how to fix it?
Thanks.
Click to expand...
Click to collapse
There are many threads, here is just one: http://forum.xda-developers.com/showthread.php?t=292547&highlight=wakeup I found it by searching.
--M
I tried the fix from the thread. The unit will still turn on, without backlight after I've put it into standby. It's the strangest thing...no keys will work accept standby, but screen functions work. It might be the ROM....
Hi guys, I find this quite annoying and wish there is a mod for this. I don't know about other HTC Touch Pro owners but i find my fone quite sensitive.........it's "EASILY" turned on by a single "SHORT" press of the power button.
I didn't even hold it for 1 second, if i suddenly press or tap on it really quick, for not even a second, it turns on.
In case ppl don't understand and tell me that maybe my fone was on in the first place but just have the backlight off, and with a single tap on the power button, the backlight goes back on again. I knew that already. But what the problem really is, is that it's totally off, and when i tap the power on button, it turns on, i.e it vibrates and shows the welcome screen and all that other startup animation.
Is there a way to increase the delay of the finger-press on the power button? Coz it's so annoying that it gets turned on when i don't want it to, especially since this fone's weakness is that it hogs battery even though i've already applied tons of tweaks etc to lower the performance and increase battery life......
Oh and i have another problem, i find the signal kinda weak, is there a program or tweak to increase the signal?? Coz on my old phone Sony Ericsson W950i, the signal is great and I never have bad signal problems with it. But using HTC Touch Pro, i have this problem. This only happens when i'm at Uni, but it's not like they have bad reception or signal blockers there like how schools or colleges have. Just that when i'm inside buildings and there're tons of other buildings around, i can't send the txt coz of bad signals and it's bloody annoying, but using my W950i works fine.....
also I noticed that when i type a txt message using the hardware keyboard, it seems to fail to send most of the time, but only when i'm in UNI. But if i switch to the software keyboard, the one that you use ur fingers or stylus, then when i send the message it often works compare to using hardware keyboard.......any ideas?
Problem No 1: Try Touch Lock Pro
Problem No 2: Try to burn the newest RadioROM.
thx but i'm not trying to lock my phone, so i don't think TouchLock Pro is what i need.......
My Raphael turns also on after pressing the power button for a little few moment. With touchlock Pro you can prevent that you mistake your Raphael. I hope you can understand what I write in my "own" english
Ok so i've got it installed now and went through all the settings but couldn't find anything that can delay the power-on button press, I still have this problem. The app is a screen-lock app, there aren't any options regarding to power-on delays.......
plz tell me what settings etc to use.
I've never said that you can fix your problem with TouchLock Pro. With this you prevent to use your Raphael when you press your power button accidentally.
ya but that's only useful when my fone is on and it locks the phone but i'm trying to prevent my fone from turning on in the first place if i accidentally press the power on button for not even 1 second, because then it will turn on and i don't want that.
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
wow yay finally someone else other than me also report having the same problem, boy am i glad to know that i'm not the only one having this problem, i thought it was just something wrong with my fone and not all HTC Touch Pros....
i can't believe there aren't any results on Google, no forum discussions or solutions to this whatsoever. Also, nobody seemed to report this problem or come up with a solution on XDA as well as other forums i use like PPCgeekz or WMusers etc.........which is odd considering how this problem is quite annoying, that if u suddenly power on the fone by accident, it can drain battery life and god knows HTC Touch Pro has a crap battery life.............
I think that htc has done a bad job testing the powerbutton on the tp2.
There are some other things like weith, thikness and batterylife that could be improved but the powerbutton issue is realy a BIG bug.
Why they didn't make a slidebutton or a timeout between push and activation?
A dobble tap on the powerbutton could also be a solution.
The next rom shoold have a improvement about this button.
People, please react on the powerbutten problem so someone can fix this.
Thanx
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
Leaving the Touch Pro (Raphael) for some minutes without battery will stop the clock. So, when you put back on the battery and power up the device, the clock will display the wrong time. The time when you remove the battery.
This is hardware related.
Can produced different symptoms though.
Facts Behind the Power Button
If take a look at the inside of the powerbutton, there are 2 points making contact when you press the button. If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "QuickShutdown" message.
But, if water/alchohol/liquid gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
As a result, despite the fact that you hit hibernate/sleep/suspend on the hardware power button = yes, the screen fades to black. But IT IS STILL ON. That explains the battery being drained.
Solution:
Open the phone hardware. Clean the power button connector manually.
Disassembling Instructions:http://www.pdacenter.ru/razborka/htc-touch-pro/
Power Button Connector: http://kudryashovda.ru/content/ne-rabotaet-knopka-vklyucheniya-na-htc-diamond
off / on / off on
i heart everyone talking about the sleep of death and to be honest, i havent really experienced this, but i definatley do have an intermitent power on and off button problem on my touch pro 2.
i read on some other forum that it could possibly be the slider that is casuing the problem. but to be honest, the button its self feels fine and looks fineand when i does work it works a treat. i havent had any water damage done to it what so ever. so im not sure , i am new too all this self help mobile stuff. so please excuse my ignorance. Ive doen the usual hard reset, button works for a few hours then calls it a day. soft rest, was working up until this week. i cant get ot to boot up again, while fiddling with the batter and a power lead. but the power button is so intermitent its driving me nuts. id be so grateful if anyone could shine any form of light on this. thanks in advance
Hello
I'm new here and still using the stock rom on my polaris
But lately, i'm having some strange problem: i lock normaly the device and press the power button (once and quickly) to shutdown the light on the screen (but keeping it working), to put it in my pocket. but sometimes, after like 1 or 2 hours, the device completely shuts down. but with no reason at all to do that...
my question is: something not correctly configured? some hardware problem? software problem?
i've serched the definitions menu & sub-menus and found nothing point to wrong configuration. (in menu: start>definitions>System>power>advanced i unchecked all the fields)
I've searched google and here and haven't found anyone with the same problem...
Does anyone here have an idea of what may be causing this?
thanks in advance for your help guys
Happened to me few times.
But I guess this happened to me: I have shut screen and put Polaris in a pocket.
Somehow I pressed Power for a longer period, and phone understood it has to shut down. Accordingly, it wrote question on display with Y/N buttons... and accidentally I pressed Yes.
Mind you, all the time Polaris is in the pocket...
This might not be what's happening to you...
yes, like you, my polaris spends most time in the pocket.
but i never saw the Y/N question on the display.....